Dynamic range prediction for an electric vehicle

Electric Vehicles (EVs) have limited energy storage capacity and the maximum autonomy range is strongly dependent of the driver's behaviour. Due to the fact of that batteries cannot be recharged quickly during a journey, it is essential that a precise range prediction is available to the driver of the EV. With this information, it is possible to check if the desirable destination is achievable without a stop to charge the batteries, or even, if to reach the destination it is necessary to perform an optimized driving (e.g., cutting the air-conditioning, among others EV parameters). The outcome of this research work is the development of an Electric Vehicle Assistant (EVA). This is an application for mobile devices that will help users to take efficient decisions about route planning, charging management and energy efficiency. Therefore, it will contribute to foster EVs adoption as a new paradigm in the transportation sector.

A survey of distributed data aggregation algorithms

Distributed data aggregation is an important task, allowing the de- centralized determination of meaningful global properties, that can then be used to direct the execution of other applications. The resulting val- ues result from the distributed computation of functions like count, sum and average. Some application examples can found to determine the network size, total storage capacity, average load, majorities and many others. In the last decade, many di erent approaches have been pro- posed, with di erent trade-o s in terms of accuracy, reliability, message and time complexity. Due to the considerable amount and variety of ag- gregation algorithms, it can be di cult and time consuming to determine which techniques will be more appropriate to use in speci c settings, jus- tifying the existence of a survey to aid in this task. This work reviews the state of the art on distributed data aggregation algorithms, providing three main contributions. First, it formally de nes the concept of aggrega- tion, characterizing the di erent types of aggregation functions. Second, it succinctly describes the main aggregation techniques, organizing them in a taxonomy. Finally, it provides some guidelines toward the selection and use of the most relevant techniques, summarizing their principal characteristics.

De novo lipogenesis in adipose tissue is associated with course of morbid obesity after bariatric surgery.

OBJECTIVE De novo lipogenesis is involved in fatty acid biosynthesis and could be involved in the regulation of the triglyceride storage capacity of adipose tissue. However, the association between lipogenic and lipolytic genes and the evolution of morbidly obese subjects after bariatric surgery remains unknown. In this prospective study we analyze the association between the improvement in the morbidly obese patients as a result of bariatric surgery and the basal expression of lipogenic and lipolytic genes. METHODS We study 23 non diabetic morbidly obese patients who were studied before and 7 months after bariatric surgery. Also, we analyze the relative basal mRNA expression levels of lipogenic and lipolytic genes in epiploic visceral adipose tissue (VAT) and abdominal subcutaneous adipose tissue (SAT). RESULTS When the basal acetyl-CoA carboxylase 1 (ACC1), acetyl-CoA synthetase 2 (ACSS2) and ATP citrate lyase (ACL) expression in SAT was below percentile-50, there was a greater decrease in weight (P = 0.006, P = 0.034, P = 0.026), body mass index (P = 0.008, P = 0.033, P = 0.034) and hip circumference (P = 0.033, P = 0.021, P = 0.083) after bariatric surgery. In VAT, when the basal ACSS2 expression was below percentile-50, there was a greater decrease in hip circumference (P = 0.006). After adjusting for confounding variables in logistic regression models, only the morbidly obese patients with SAT or VAT ACSS2 expression ≥ P50 before bariatric surgery had a lower percentage hip circumference loss (

Desenvolupament d'algorismes biològicament inspirats basats en Support Vector Machines

L'objectiu d'aquest projecte ha estat el desenvolupament d'algorismes biològicament inspirats per a l'olfacció artificial. Per a assolir-lo ens hem basat en el paradigma de les màquines amb suport vectorial. Hem construit algoritmes que imitaven els processos computacionals dels diferents sistemes que formen el sistema olfactiu dels insectes, especialment de la llagosta Schistocerca gregaria. Ens hem centrat en el lòbuls de les antenes, i en el cos fungiforme. El primer està considerat un dispositiu de codificació de les olors, que a partir de la resposta temporal dels receptors olfactius a les antenes genera un patró d'activació espaial i temporal. Quant al cos fungiforme es considera que la seva funció és la d'una memòria per als olors, així com un centre per a la integració multi-sensorial. El primer pas ha estat la construcció de models detallats dels dos sistemes. A continuació, hem utilitzat aquests models per a processar diferents tipus de senyals amb l'objectiu de abstraure els principis computacionals subjacents. Finalment, hem avaluat les capacitats d'aquests models abstractes, i els hem utilitzat per al processat de dades provinents de sensors de gasos. Els resultats mostren que el models abstractes tenen millor comportament front el soroll i més capacitat d'emmagatzematge de records que altres models més clàssics, com ara les memòries associatives de Hopfield o fins i tot en determinades circumstàncies que les mateixes Support Vector Machines.

Hidrossedimentologia e disponibilidade hídrica da bacia hidrográfica da Barragem de Poilão

TEIXEIRA, José João Lopes. Departamento de Engenharia Agrícola, Centro de Ciências Agrárias da Universidade Federal do Ceará, Agosto de 2011. Hidrossedimentologia e disponibilidade hídrica da bacia hidrográfica da Barragem de Poilão, Cabo Verde. Orientador: José Carlos de Araújo. Examinadores: George Leite Mamede, Pedro Henrique Augusto Medeiros. O Arquipélago de Cabo Verde, situado na costa ocidental africana, sofre influência do deserto de Saara tornando o clima caraterizado por pluviometria muito baixa e distribuída irregularmente no espaço e no tempo. As chuvas são muito concentradas, gerando grandes escoamentos para o mar. O aumento da disponibilidade hídrica requer além da construção e manutenção de infraestrutura de captação e conservação de águas pluviais, uma gestão eficiente destes recursos. Atualmente, constitui um dos eixos estratégicos da política do estado de Cabo Verde, a captação, armazenamento e mobilização de águas superficiais através de construção de barragens. Estudos do comportamento hidrológico e sedimentológico do reservatório e da sua bacia de contribuição constituem premissas básicas para um ótimo dimensionamento, gestão e monitoramento da referida infraestrutura. É neste sentido que o presente estudo objetivou sistematizar informações hidrológicas e sedimentológicas da bacia hidrográfica da Barragem de Poilão (BP) e apresentar proposta operacional de longo prazo. A área de estudo ocupa 28 km² a montante da Bacia Hidrográfica da Ribeira Seca (BHRS) na Ilha de Santiago. A altitude da bacia varia de 99 m, situada na cota da barragem, até 1394 m. Para o estudo, foram utilizados e sistematizados, série pluviométrica de 1973 a 2010, registos de vazão instantânea do período 1984 a 2000 e registos agroclimáticos da área de estudo (1981 a 2004). Para o preenchimento das falhas tanto dos escoamentos como da descarga sólida em suspensão, foi utilizado o método de curva chave. Para estimativa de produção de sedimentos na bacia, aplicou-se a Equação Universal de Perda de Solo (USLE) e a razão de aporte de sedimentos (SDR). O índice de retenção de sedimentos no reservatório foi estimado pelo método de Brune e a distribuição de sedimento pelo método empírico de redução de área descrito por Borland e Miller e, revisado por Lara. Para gerar e simular curvas de vazão versus garantia foi utilizado código computacional VYELAS, desenvolvido por Araújo e baseado na abordagem de Campos. Também foi avaliada a redução da vazão de retirada do período 2006 a 2026, provocado pelo assoreamento do reservatório. Concluiu-se que em média a precipitação anual é de 323 mm, concentrando-se 73% nos meses de agosto e setembro; a bacia de contribuição apresenta como valor um número de curva (CN) de 76, com abstração inicial (Ia) de 26 mm, coeficiente de escoamento de 19% e uma vazão anual afluente de 1,7 hm³(cv= 0,73); a disponibilidade hídrica para uma garantia de 85% é avaliada em 0,548 hm³/ano e não 0,671 hm³/ano como indica o projeto original. Com uma descarga sólida estimada em 22.185 m³/ano conclui-se que até o ano de 2026, a capacidade do reservatório reduz a uma taxa de 1,8 % ao ano, devido ao assoreamento, provocando uma redução de 41% da disponibilidade hídrica inicial. Nessa altura, as perdas por evaporação e sangria serão da ordem de 81% da vazão afluente de entrada no reservatório. Na base desses resultados se apresentou proposta de operação da BP.

Distribution and vertical stratification of carbon and nitrogen in soil under different managements in the pampean region of Argentina

One of the expected benefits of no-tillage systems is a higher rate of soil C sequestration. However, higher C retention in soil is not always apparent when no-tillage is applied, due e.g., to substantial differences in soil type and initial C content. The main purpose of this study was to evaluate the potential of no-tillage management to increase the stock of total organic C in soils of the Pampas region in Argentina. Forty crop fields under no-tillage and conventional tillage systems and seven undisturbed soils were sampled. Total organic C, total N, their fractions and stratification ratios and the C storage capacity of the soils under different managements were assessed in samples to a depth of 30 cm, in three layers (0-5, 5-15 and 15-30 cm). The differences between the C pools of the undisturbed and cultivated soils were significant (p < 0.05) and most pronounced in the top (0-5 cm) soil layer, with more active C near the soil surface (undisturbed > no-tillage > conventional tillage). Based on the stratification ratio of the labile C pool (0-5/5-15 cm), the untilled were separated from conventionally tilled areas. Much of the variation in potentially mineralizable C was explained by this active C fraction (R² = 0.61) and by total organic C (R² = 0.67). No-till soils did not accumulate more organic C than conventionally tilled soils in the 0-30 cm layer, but there was substantial stratification of total and active C pools at no till sites. If the C stratification ratio is really an indicator of soil quality, then the C storage potential of no-tillage would be greater than in conventional tillage, at least in the surface layers. Particulate organic C and potentially mineralizable C may be useful to evaluate variations in topsoil organic matter.

Assessment of Efficiency and Adequacy of Retention Terraces

Due to losses caused by water erosion, the development of techniques that increase the efficiency of soil conservation practices is fundamental. Terracing of agricultural lands is an important conservation practice. Bearing in mind that improperly built terraces may negatively affect the landscape, the purpose of this work was to evaluate the efficiency as well as the adequacy of retention terraces. Assessments were performed in four terraces implanted in different states, all located in the mideastern region of the state of Minas Gerais. The water storage efficiency of the terraces was determined by comparing the effective with the required storage capacity, as established in the project. Proposals were also made for the adequacy of the assessed terraces, based on the correction of the characteristics that jeopardized storage efficiency. The storage efficiency of three of the four assessed terraces was below the required levels (0.5-13 %). The main properties influencing storage capacity were: uniformity of ridge crest height, terrace end closure, and the cross section finishing. In two of the three low-efficiency terraces, the correction of these characteristics proved sufficient to raise the storage efficiency to nearly 100 %.

Evaluation of physical quality indices of a soil under a seasonal semideciduous forest

The concept of soil quality is currently the subject of great discussion due to the interaction of soil with the environment (soil-plant-atmosphere) and practices of human intervention. However, concepts of soil quality relate quality to agricultural productivity, but assessment of soil quality in an agronomic context may be different from its assessment in natural areas. The aim of this study was to assess physical quality indices, the S index, soil aeration capacity (ACt/Pt), and water storage capacity (FC/Pt) of the soil from a permanent plot in the Caetetus Ecological Reserve (Galia, São Paulo, Brazil) under a seasonal semideciduous forest and compare them with the reference values for soil physical quality found in the literature. Water retention curves were used for that purpose. The S values found were higher than the proposed limit for soil physical quality (0.035). The A and E horizons showed the highest values because their sandy texture leads to a high slope of the water retention curve. The B horizons showed the lowest S values because their natural density leads to a lower slope of the water retention curve. The values found for ACt/Pt and FC/Pt were higher and lower than the idealized limits. The values obtained from these indices under natural vegetation can provide reference values for soils with similar properties that undergo changes due to anthropic activities. All the indices evaluated were effective in differentiating the effects of soil horizons in the natural hydro-physical functioning of the soils under study.

Sampling Position under No-Tillage System Affects the Results of Soil Physical Properties

ABSTRACT Understanding the spatial behavior of soil physical properties under no-tillage system (NT) is required for the adoption and maintenance of a sustainable soil management system. The aims of this study were to quantify soil bulk density (BD), porosity in the soil macropore domain (PORp) and in the soil matrix domain (PORm), air capacity in the soil matrix (ACm), field capacity (FC), and soil water storage capacity (FC/TP) in the row (R), interrow (IR), and intermediate position between R and IR (designated IP) in the 0.0-0.10 and 0.10-0.20 m soil layers under NT; and to verify if these soil properties have systematic variation in sampling positions related to rows and interrows of corn. Soil sampling was carried out in transect perpendicular to the corn rows in which 40 sampling points were selected at each position (R, IR, IP) and in each soil layer, obtaining undisturbed samples to determine the aforementioned soil physical properties. The influence of sampling position on systematic variation of soil physical properties was evaluated by spectral analysis. In the 0.0-0.1 m layer, tilling the crop rows at the time of planting led to differences in BD, PORp, ACm, FC and FC/TP only in the R position. In the R position, the FC/TP ratio was considered close to ideal (0.66), indicating good water and air availability at this sampling position. The R position also showed BD values lower than the critical bulk density that restricts root growth, suggesting good soil physical conditions for seed germination and plant establishment. Spectral analysis indicated that there was systematic variation in soil physical properties evaluated in the 0.0-0.1 m layer, except for PORm. These results indicated that the soil physical properties evaluated in the 0.0-0.1 m layer were associated with soil position in the rows and interrows of corn. Thus, proper assessment of soil physical properties under NT must take into consideration the sampling positions and previous location of crop rows and interrows.

Carbohydrate and nitrogen stores in Festuca paniculata under mowing explain dominance in subalpine grasslands

Cessation of traditional management threatens semi-natural grassland diversity through the colonisation or increase of competitive species adapted to nutrient-poor conditions. Regular mowing is one practice that controls their abundance. This study evaluated the ecophysiological mechanisms limiting short- and long-term recovery after mowing for Festuca paniculata, a competitive grass that takes over subalpine grasslands in the Alps following cessation of mowing. We quantified temporal variations in carbon (C) and nitrogen (N) content, starch, fructan and total soluble sugars in leaves, stem bases and roots of F. paniculata during one growth cycle in mown and unmown fields and related them to the dynamics of soil mineral N concentration and soil moisture. Short-term results suggest that the regrowth of F. paniculata following mowing might be N-limited, first because of N dilution by C increments in the plant tissue, and second, due to low soil mineral N and soil moisture at this time of year. However, despite short-term effects of mowing on plant growth, C and N content and concentration at the beginning of the following growing season were not affected. Nevertheless, total biomass accumulation at peak standing biomass was largely reduced compared to unmown fields. Moreover, lower C storage capacity at the end of the growing season impacted C allocation to vegetative reproduction during winter, thereby dramatically limiting the horizontal growth of F. paniculata tussocks in the long term. We conclude that mowing reduces the growth of F. paniculata tussocks through both C and N limitation. Such results will help understanding how plant responses to defoliation regulate competitive interactions within plant communities.

Optimization of Snow Drifting Mitigation and Control Methods for Iowa Conditions Part II, TR-626, 2015

Blowing and drifting of snow is a major concern for transportation efficiency and road safety in regions where their development is common. One common way to mitigate snow drift on roadways is to install plastic snow fences. Correct design of snow fences is critical for road safety and maintaining the roads open during winter in the US Midwest and other states affected by large snow events during the winter season and to maintain costs related to accumulation of snow on the roads and repair of roads to minimum levels. Of critical importance for road safety is the protection against snow drifting in regions with narrow rights of way, where standard fences cannot be deployed at the recommended distance from the road. Designing snow fences requires sound engineering judgment and a thorough evaluation of the potential for snow blowing and drifting at the construction site. The evaluation includes site-specific design parameters typically obtained with semi-empirical relations characterizing the local transport conditions. Among the critical parameters involved in fence design and assessment of their post-construction efficiency is the quantification of the snow accumulation at fence sites. The present study proposes a joint experimental and numerical approach to monitor snow deposits around snow fences, quantitatively estimate snow deposits in the field, asses the efficiency and improve the design of snow fences. Snow deposit profiles were mapped using GPS based real-time kinematic surveys (RTK) conducted at the monitored field site during and after snow storms. The monitored site allowed testing different snow fence designs under close to identical conditions over four winter seasons. The study also discusses the detailed monitoring system and analysis of weather forecast and meteorological conditions at the monitored sites. A main goal of the present study was to assess the performance of lightweight plastic snow fences with a lower porosity than the typical 50% porosity used in standard designs of such fences. The field data collected during the first winter was used to identify the best design for snow fences with a porosity of 50%. Flow fields obtained from numerical simulations showed that the fence design that worked the best during the first winter induced the formation of an elongated area of small velocity magnitude close to the ground. This information was used to identify other candidates for optimum design of fences with a lower porosity. Two of the designs with a fence porosity of 30% that were found to perform well based on results of numerical simulations were tested in the field during the second winter along with the best performing design for fences with a porosity of 50%. Field data showed that the length of the snow deposit away from the fence was reduced by about 30% for the two proposed lower-porosity (30%) fence designs compared to the best design identified for fences with a porosity of 50%. Moreover, one of the lower-porosity designs tested in the field showed no significant snow deposition within the bottom gap region beneath the fence. Thus, a major outcome of this study is to recommend using plastic snow fences with a porosity of 30%. It is expected that this lower-porosity design will continue to work well for even more severe snow events or for successive snow events occurring during the same winter. The approach advocated in the present study allowed making general recommendations for optimizing the design of lower-porosity plastic snow fences. This approach can be extended to improve the design of other types of snow fences. Some preliminary work for living snow fences is also discussed. Another major contribution of this study is to propose, develop protocols and test a novel technique based on close range photogrammetry (CRP) to quantify the snow deposits trapped snow fences. As image data can be acquired continuously, the time evolution of the volume of snow retained by a snow fence during a storm or during a whole winter season can, in principle, be obtained. Moreover, CRP is a non-intrusive method that eliminates the need to perform man-made measurements during the storms, which are difficult and sometimes dangerous to perform. Presently, there is lots of empiricism in the design of snow fences due to lack of data on fence storage capacity on how snow deposits change with the fence design and snow storm characteristics and in the estimation of the main parameters used by the state DOTs to design snow fences at a given site. The availability of such information from CRP measurements should provide critical data for the evaluation of the performance of a certain snow fence design that is tested by the IDOT. As part of the present study, the novel CRP method is tested at several sites. The present study also discusses some attempts and preliminary work to determine the snow relocation coefficient which is one of the main variables that has to be estimated by IDOT engineers when using the standard snow fence design software (Snow Drift Profiler, Tabler, 2006). Our analysis showed that standard empirical formulas did not produce reasonable values when applied at the Iowa test sites monitored as part of the present study and that simple methods to estimate this variable are not reliable. The present study makes recommendations for the development of a new methodology based on Large Scale Particle Image Velocimetry that can directly measure the snow drift fluxes and the amount of snow relocated by the fence.

1010-005 Bloody Run Creek Watershed Final Report

The City of Marquette lies in the 65,000 acre Mississippi River watershed, and is surrounded by steep bluffs. Though scenic, controlling water runoff during storm events presents significant challenges. Flash-flooding from the local watershed has plagued the city for decades. The people of Marquette have committed to preserve the water quality of key natural resources in the area including the Bloody Run Creek and associated wetlands by undertaking projects to control the spread of debris and sediment caused by excess runoff during area storm events. Following a July 2007 storm (over 8” of rain in 24 hours) which caused unprecedented flood damage, the City retained an engineering firm to study the area and provide recommendations to eliminate or greatly reduce uncontrolled runoff into the Bloody Run Creek wetland, infrastructure damage and personal property loss. Marquette has received Iowa Great Places designation, and has demonstrated its commitment to wetland preservation with the construction of Phase I of this water quality project. The Bench Area Storm Water Management Plan prepared by the City in 2008 made a number of recommendations to mitigate flash flooding by improving storm water conveyance paths, detention, and infrastructure within the Bench area. Due to steep slopes and rocky geography, infiltration based systems, though desirable, would not be an option over surface based systems. Runoff from the 240 acre watershed comes primarily from large, steep drainage areas to the south and west, flowing to the Bench area down three hillside routes; designated as South East, South Central and South West. Completion of Phase I, which included an increased storage capacity of the upper pond, addressed the South East and South Central areas. The increased upper pond capacity will now allow Phase II to proceed. Phase II will address runoff from the South West drainage area; which engineers have estimated to produce as much water volume as the South Central and South East areas combined. Total costs for Phase I are $1.45 million, of which Marquette has invested $775,000, and IJOBS funding contributed $677,000. Phase II costs are estimated at $617,000. WIRB funding support of $200,000 would expedite project completion, lessen the long term debt impact to the community and aid in the preservation of the Bloody Run Creek and adjoining wetlands more quickly than Marquette could accomplish on its own.

Carbohydrate and nitrogen stores in Festuca paniculata under mowing explain dominance in subalpine grasslands

Cessation of traditional management threatens semi-natural grassland diversity through the colonisation or increase of competitive species adapted to nutrient-poor conditions. Regular mowing is one practice that controls their abundance. This study evaluated the ecophysiological mechanisms limiting short- and long-term recovery after mowing for Festuca paniculata, a competitive grass that takes over subalpine grasslands in the Alps following cessation of mowing. We quantified temporal variations in carbon (C) and nitrogen (N) content, starch, fructan and total soluble sugars in leaves, stem bases and roots of F. paniculata during one growth cycle in mown and unmown fields and related them to the dynamics of soil mineral N concentration and soil moisture. Short-term results suggest that the regrowth of F. paniculata following mowing might be N-limited, first because of N dilution by C increments in the plant tissue, and second, due to low soil mineral N and soil moisture at this time of year. However, despite short-term effects of mowing on plant growth, C and N content and concentration at the beginning of the following growing season were not affected. Nevertheless, total biomass accumulation at peak standing biomass was largely reduced compared to unmown fields. Moreover, lower C storage capacity at the end of the growing season impacted C allocation to vegetative reproduction during winter, thereby dramatically limiting the horizontal growth of F. paniculata tussocks in the long term. We conclude that mowing reduces the growth of F. paniculata tussocks through both C and N limitation. Such results will help understanding how plant responses to defoliation regulate competitive interactions within plant communities.

Plac8 is required for white adipocyte differentiation in vitro and cell number control in vivo.

Plac8 belongs to an evolutionary conserved family of proteins, mostly abundant in plants where they control fruit weight through regulation of cell number. In mice, Plac8 is expressed both in white and brown adipose tissues and we previously showed that Plac8(-/-) mice develop late-onset obesity, with abnormal brown fat differentiation and reduced thermogenic capacity. We also showed that in brown adipocytes, Plac8 is an upstream regulator of C/EBPβ expression. Here, we first assessed the role of Plac8 in white adipogenesis in vitro. We show that Plac8 is induced early after induction of 3T3-L1 adipocytes differentiation, a process that is prevented by Plac8 knockdown; similarly, embryonic fibroblasts obtained from Plac8 knockout mice failed to form adipocytes upon stimulation of differentiation. Knockdown of Plac8 in 3T3-L1 was associated with reduced expression of C/EBPβ, Krox20, and Klf4, early regulators of the white adipogenic program, and we show that Plac8 could transactivate the C/EBPβ promoter. In vivo, we show that absence of Plac8 led to increased white fat mass with enlarged adipocytes but reduced total number of adipocytes. Finally, even though Plac8(-/-) mice showed impaired thermogenesis due to brown fat dysfunction, this was not associated with changes in glycemia or plasma free fatty acid and triglyceride levels. Collectively, these data indicate that Plac8 is an upstream regulator of C/EBPβ required for adipogenesis in vitro. However, in vivo, Plac8 is dispensable for the differentiation of white adipocytes with preserved fat storage capacity but is required for normal fat cell number regulation.

Hadoop : processament distribuït de gran volum de dades en el núvol d'Apache

Avui en dia es genera un volum increïble de dades de diferents tipus i que provenen de multitud d'orígens. Els sistemes d'emmagatzematge i processament distribuït són els elements tecnològics que fan possible capturar aquest allau de dades i permeten donar-ne un valor a través d'anàlisis diversos. Hadoop, que integra un sistema d'emmagatzematge i processament distribuïts, s'ha convertit en l'estàndard de-facto per a aplicacions que necessiten una gran capacitat d'emmagatzematge, inclús de l'ordre de desenes de PBs. En aquest treball farem un estudi de Hadoop, analitzarem l'eficiència del seu sistema de durabilitat i en proposarem una alternativa.