Synthesis and vesicle formation from dimeric pseudoglyceryl lipids with (CH2)(m) spacers: pronounced m-value dependence of thermal properties, vesicle fusion, and cholesterol complexation

Eight new dimeric lipids, in which the two Me2N+ ion headgroups are separated by a variable number of polymethylene units [-(CH2)(m)-], have been synthesized. The electron micrograph (TEM) and dynamic light scattering (DLS) of their aqueous dispersions confirmed the formation of vesicular-type aggregates. The vesicle sizes and morphologies were found to depend strongly on the m value, the method, and thermal history of the vesicle preparation. Information on the thermotropic properties of the resulting vesicles was obtained from microcalorimetry and temperature-dependent fluorescence anisotropy measurements. Interestingly, the T-m values for these vesicles revealed a nonlinear dependence on spacer chain length (m value). These vesicles were able to entrap riboflavin. The rates of permeation of the OH- ion under an imposed transmembrane pH gradient were also found to depend significantly on the m value. X-Ray diffraction of the cast films of the lipid dispersions elucidated the nature and the thickness of these membrane organizations, and it was revealed that these lipids organize in three different ways depending on the m value. The EPR spin-probe method with the doxylstearic acids 5NS, 12NS, and 16NS, spin-labeled at various positions of stearic acid, was used to establish, the chain-flexibility gradient and homogeneity of these bilayer assemblies. The apparent fusogenic propensities of these bipolar tetraether lipids were investigated in the presence of Na2SO4 with fluorescence-resonance energy-transfer fusion assay. Small unilamellar vesicles formed from 1 and three representative biscationic lipids were also studied with fluorescence anisotropy and H-1 NMR spectroscopic techniques in the absence and the presence of varying amounts of cholesterol.

Bioremediation and lipid synthesis through mixotrophic algal consortia in municipal wastewater

Algae grown in outdoor reactors (volume: 10 L and depth: 20 cm) were fed directly with filtered and sterilised municipal wastewater. The nutrient removal efficiencies were 86%, 90%, 89%, 70% and 76% for TOC, TN, NH4-N, TP and OP, respectively, and lipid content varied from 18% to 28.5% of dry algal biomass. Biomass productivity of similar to 122 mg/l/d (surface productivity 24.4 g/m(2)/d) and lipid productivity of similar to 32 mg/l/d were recorded. Gas chromatography and mass spectrometry (GC-MS) analyses of the fatty acid methyl esters (FAME) showed a higher content of desirable fatty acids (bearing biofuel properties) with major contributions from saturates such as palmitic acid C16:0; similar to 40%] and stearic acid C18:0; similar to 34%], followed by unsaturates such as oleic acid C18:1(9); similar to 10%] and linoleic acid C18:2(9,12); similar to 5%]. The decomposition of algal biomass and reactor residues with an exothermic heat content of 123.4 J/g provides the scope for further energy derivation. (C) 2014 Elsevier Ltd. All rights reserved.

Water Vapor Barrier Material by Covalent Self-Assembly for Organic Device Encapsulation

Development of barrier materials for organic device encapsulation is of key interest for the commercialization of organic electronics. In this work, we have fabricated barrier films with ultralow water vapor permeabilities by reactive layer-by-layer approach. Using this technique, alternative layers of polyethylene imine and stearic acid were covalently bonded on a Surlyn film. The roughness, transparency and thickness of the films were determined by atomic force microscopy, UV-visible spectroscopy and scanning electron microscopy, respectively. Water vapor transmission rates through these films and the ability of these films to protect the organic photovoltaic devices was investigated. The films with covalently assembled bilayers exhibited lower water vapor transmission rates and maintained higher organic photovoltaic device efficiencies compared to the neat Surlyn film.

Reactive interlayer based ultra-low moisture permeable membranes for organic photovoltaic encapsulation

Reactive interlayers consisting of zero valent iron and copper nanoparticles have been successfully incorporated into Surlyn films to fabricate moisture barrier materials with reduced water vapor permeabilities. The reactive nanoparticles dispersed in stearic acid were employed as the interlayers due to their ability to react with moisture. The water vapor transmission rates through the fabricated barrier films with reactive iron and copper interlayers decreased by over 4 orders of magnitude when compared to neat Surlyn. The flexibility and transparency of the barrier films have been evaluated by tensile and UV-visible experiments. Moreover, the accelerated aging studies conducted in accordance with the ISOS-III protocol confirmed the increased lifetimes of the organic photovoltaic (OPV) devices encapsulated with these reactive barrier films.

Nano-Tribological Study on a Super-Hydrophobic Film Formed on Rough Aluminum

A novel super-hydrophobic stearic acid (STA) film with a water contact angle of 166° was prepared by chemical adsorption on aluminum wafer coated with polyethyleneimine (PEI) film. The micro-tribological behavior of the super-hydrophobic STA monolayer was compared with that of the polished and PEI-coated Al surfaces. The effect of relative humidity on the adhesion and friction was investigated as well. It was found that the STA monolayer showed decreased friction, while the adhesive force was greatly decreased by increasing the surface roughness of the Al wafer to reduce the contact area between the atomic force microscope (AFM) tip and the sample surface to be tested. Thus the friction and adhesion of the Al wafer was effectively decreased by generating the STA monolayer, which indicated that it could be feasible and rational to prepare a surface with good adhesion resistance and lubricity by properly controlling the surface morphology and the chemical composition. Both the adhesion and friction decreased as the relative humidity was lowered from 65% to 10%, though the decrease extent became insignificant for the STA monolayer.

Micro- and macro-tribological study on a self-assembled dual-layer film

A novel self-assembled dual-layer film as apotential excellent lubricant for micromachines was successfully prepared on single-crystal silicon substrate by chemical adsorption of stearic acid (STA) molecules on self-assembled monolayer of 3-aminopropyltri

Efeito dos óleos vegetais de linhaça e de amendoim sobre a vulcanização da borracha natural (NR)

O efeito de dois óleos vegetais, óleo de linhaça e óleo de amendoim, em composições de borracha natural (NR) foi avaliado. Um sistema de vulcanização convencional foi escolhido e, após a mistura, os parâmetros reométricos (Sℓ, Sh, ts1 e t90) foram analisados. A cinética de vulcanização foi estudada através de dois modelos cinéticos um modelo simplificado e o modelo proposto por Coran. Os resultados experimentais permitem concluir que os óleos vegetais sozinhos ou combinados são capazes de atuar como ativadores e, juntamente com os demais ingredientes da composição, de vulcanizar a borracha. No entanto, uma densidade de ligações cruzadas satisfatória só é atingida quando o ácido esteárico está presente. O modelo cinético de Coran permitiu também estudar os diferentes estágios da vulcanização e verificar que a etapa crítica do processo é a formação do precursor de ligações cruzadas (A → B). Provavelmente, a presença significativa de ácidos graxos insaturados na composição dos óleos vegetais (principalmente, os ácidos oléico e linolênico) permita reações laterais não esperadas, o que diminui o rendimento final em ligações cruzadas dos vulcanizados.

滇金足草、凋缨菊和长喙吴萸的化学成分研究

本论文对滇金足草（Goldfussia yunnanensis）、凋缨菊（Camchaya loloana）和长喙吴萸（Evodia vestia）的化学成分进行了研究，通过色谱分离得到40个化合物。主要基于波谱数据鉴定了它们的结构，其中10个为新化合物。 1．从滇金足草地上枝叶的95%乙醇提取物中共分离鉴定了16个化合物：泽漆内酯A（1）、18-羟基泽漆内酯A（2）、18-氧代泽漆内酯A（3）、18-羟基-3-O-β-D-吡喃葡萄糖-泽漆内酯A（4）、3-O-β-D-吡喃葡萄糖-泽漆内酯A（5）、3-O-β-D-吡喃半乳糖-泽漆内酯A（6）、6-E-肉桂酰哈巴俄苷（7）、E-哈巴俄苷（8）、5，6-异亚丙二氧基哈巴俄苷（9）、β-谷甾醇（10）、β-胡萝卜苷（11）、齐墩果酸（12）、肉桂酸（13）、麦角固醇（14）、硬脂酸（15）和丁二酸（16）。其中2-7为新化合物。5，6-异亚丙二氧基哈巴俄苷（9）以人工产物形式得到。 2．从凋缨菊地上枝叶的95%乙醇提取物中分离并鉴定了13个化合物：凋缨菊内酯A~C (17-19)、1β-乙酰基凋缨菊内酯C(20)、b-谷甾醇（10）、β-胡萝卜苷（11）、羽扇豆醇（21）、桦木醇（22）、桦木酸（23）、芥子醇（24）、紫丁香苷（25）、咖啡酸（26）和熊果酸（27）。其中化合物17-20为桉叶烷内酯类新化合物。化合物17、18、20对细胞株HepG2的GI50依次为7.80、7.08、4.99 µg/mL。 3．从长喙吴萸（E. vestia）地上枝叶的95%乙醇提取物中分离并鉴定了13个化合物：佛手内酯（28）、花椒毒素（29）、异茴芹内酯（30）、七叶内酯（31）、东莨宕素（32）、瑞香素（33）、异紫花前胡内酯(34)、茵芋碱（35）、山刈碱（36）、白鲜碱（37）、黄柏酮（38）、柠檬苦素（39）和对羟基苯甲醛（40）。 4．综述了1990—2007年期间从菊科植物中发现的桉叶烷-12，6内酯的化学结构、生物活性、生物转化及化学合成方面的研究进展。 Phytochemical investigation on Goldfussia yunnanensis, Camchaya loloana, and Evodia vestia, led to the isolation of 40 compounds, 10 of which were new ones. 1. Six new compounds were isolation from 95% ethanolic extract of the aerial parts of G. yunnanensis, and identified as 18-hydroxyhelioscopinolide A (2), 18-oxohelioscopinolide A (3), 18-hydroxy-3-O-β-D-glucopyranosylhelioscopinolide A (4), 3-O-β-D-glucopyranosylhelioscopinolide A (5),3-O-β-D-Galactopyranosyl helioscopinolide A (6), 6-O-trans-cinnamoyl E-harpagoside (7). The known compounds isolated were helioscopinolide A (1), E-harpagoside A (8), 5,6-isopropylidene E-harpagoside A (9), β-sitosterol (10), β-daucosterol (11), oleanolic acid (12), cinnamic acid (13), ergosterol (14), stearic acid (15) and succinic acid (16). Compound 9 was an artifact. 2. Four new compounds, loloanolides A – C (17 - 19) and 1β-acetoxy-loloanolide C (20), were isolation from 95% ethanolic extract of the aerial parts of C. loloana. The known ones were β-sitosterol (10), β-daucosterol (11), lupeol (21), betulin (22), betulinic acid (23), sinapyl (24), syringin (25), caffeic acid (26) and ursolic acid (27). The GI50 values of compounds 17, 18 and 20 to HepG2 cell line were 7.80, 7.08 and 4.99 µg/mL, respectively. 3. Thirteen were isolated from 95% ethanolic extract of the aerial parts of E. vestia for the first time. They were determined to be bergapten (28), xanthotoxin (29), isopimpinellin (30), esculetin (31), scopoletin (32), daphnetin (33), marmesin (34), skimmianine (35), confusameline (36), dictamine (37), obacunone (38), limonin (39) and p-hydroxy phenyl aldehyde (40). 4. The structures, biological activities, biotransformation and chemical syntheses of eudesmane-12, 6-olides from the Asteraceae during 1990-2007 were reviewed.

Control for oriented growth of large size KCl crystals by the competition between spontaneous and induced nucleation/growth on a Langmuir-Blodgett film

Langmuir-Blodgett (LB) film of stearic acid was used as template to induce the nucleation and growth of KCl crystals when the KCl solution was cooled from 50 to 25 degrees C. When the LB film template was vertically dipped into the solution, only induced crystals with (1 1 0) orientation were formed. However, if the template was horizontally placed into solutions, both the induced nuclei at the solution/film interface and spontaneous nuclei formed in solution were simultaneously absorbed onto the LB film, and then grew further to form crystals. X-ray diffraction (XRD) patterns and optical microscopy images showed that the orientation and morphology of the crystals were controlled properly by changing the orientation and position of the LB films in the solutions.

Nucleation and growth of glycine crystals with controllable sizes and polymorphs on Langmuir-Blodgett films

Control of crystal polymorph and size is very important in many application fields. Herein we demonstrate that Langmuir-Blodgett (LB) films of stearic acid (SA) and octadecylamine (ODA) can serve as templates and generate different polymorphs of glycine crystals. In the neutral aqueous solutions, gamma-glycine crystallizes on LB films of ODA while the polymorphic outcome becomes the (x-form on LB films of SA. These observed results could be explained by the electrostatic interactions and geometric lattice matching at the LB film/crystal interfaces, respectively. By keeping the appropriate supersaturation, we have successfully controlled the number of crystals grown on LB films; for example, in some certain cases, only one piece of crystal was grown on LB films in solution. Therefore, large crystals of centimeter size could be prepared. These experimental results suggest a new approach to produce an organic crystal with bulk scale.

An infrared study on Langmuir-Blodgett films of octadecylammonium octadecanoate: FWHM and the vibrational coupling

The monolayer of the mixture of octadecanoic acid and octadecylamine with molar ratio 1: 1 has been investigated at the air-water interface. It was found that the monolayer shows a rather stable state at the surface pressure of 30 mN/m and this monolayer can be transferred onto a CaF2 plate by Langmuir-Blodgett (LB) technique. The infrared spectra of LB films indicated that octadecyl ammonium octadecanoate is formed by an intermolecular proton exchange between adjacent carboxylic and aminic groups (COO- and NH3+). In three-layer LB film, the CH2 scissoring mode of the long hydrocarbon chains of octadecyl ammonium octadecanoate shows a broad band feature at about 1468 cm(-1) while this vibrational mode of three-layer LB film of the mixture (1: 1) of deuterated stearic acid and octadecylamine (octadecylammonium octadecanoate-d35, C18H37NH3+C17D35COO-) only shows a narrow band. The broad feature of the CH2 scissoring mode in octadecylammonium octadecanoate probably originates from the coupling between the chain of stearic acid and that of octadecylamine while this kind of coupling could be completely removed in octadecylammonium octadecanoate-d35.

The LB films of dansyl chloride labeled octadecylamine and its fluorescence lifetime

Octadecylamine was derivatized with dansyl chloride (5-dimethylaminonaphthalene-1-sulfonyl chloride) In order to simplify and understand the LB films of fluorescent probe labeling proteins. its monolayer and multilayers in the absence and presence of stearic acid were deposited by LB technique. Fluorescence spectra and lifetimes of the fluorescent products were studied to elucidate the microenvironment of molecules in the LB films.

Preparation of polyimide-BaTiO3 hybrid films by a dispersion process and their microstructure

Barium titanate (BaTiO3) powders with particle sizes of 30 similar to 50 nm were prepared from barium stearate, titanium alkoxides and stearic acid by stearic acid-gel method. Dispersing the agglomerate of BaTiO3 nanoparticles into poly(amic acid) solution followed by curing led to the formation of polyimide hybrid films. The hybrid films were transparent and well distributed with BaTiO3 nanoparticles when the BaTiO3 content was less than 1 wt%. Highly loaded hybrid film containing 30 wit % BaTiO3 was tough, had a smooth surface and possessed much higher dielectric and piezoelectric constants than the parent polyimide.

Interaction of glucose and long chain fatty acids (C18) on antioxidant defences and free radical damage in porcine vascular smooth muscle cells in vitro.

Aims/hypothesis: Abnormalities of glucose and fatty acid metabolism in diabetes are believed to contribute to the development of oxidative stress and the long term vascular complications of the disease therefore the interactions of glucose and long chain fatty acids on free radical damage and endogenous antioxidant defences were investigated in vascular smooth muscle cells. Methods: Porcine vascular smooth muscle cells were cultured in 5 mmol/l or 25 mmol/l glucose for ten days. Fatty acids, stearic acid (18:0), oleic acid (18:1), linoleic acid (18:2) and gamma-linolenic acid (18:3) were added with defatted bovine serum albumin as a carrier for the final three days. Results. Glucose (25 mmol/l) alone caused oxidative stress in the cells as evidenced by free radical-mediated damage to DNA, lipids, and proteins. The addition of fatty acids (0.2 mmol/l) altered the profile of free radical damage; the response was J-shaped with respect to the degree of unsaturation of each acid, and oleic acid was associated with least damage. The more physiological concentration (0.01 mmol/l) of gamma-linolenic acids was markedly different in that, when added to 25 mmol/l glucose it resulted in a decrease in free radical damage to DNA, lipids and proteins. This was due to a marked increase in levels of the antioxidant, glutathione, and increased gene expression of the rate-limiting enzyme in glutathione synthesis, gamma-glutamylcysteine synthetase. Conclusion/Interpretation: The results clearly show that glucose and fatty acids interact in the production of oxidative stress in vascular smooth muscle cells.

Effect of glass substrate and deposition technique on the properties of sol gel TiO2 thin films

Na+ ions have a detrimental effect on the photocatalytic activity of thin sot gel films deposited on soda lime glass due to their diffusion into the film during the calcination process. Given that the content of sodium in glass substrate might be the crucial parameter in determining the activity of a photocatalyst, the aim of the present work was the comparison of the photoinduced properties of a thin TiO2 film prepared on three different glass substrates namely on quartz (Q) glass, borosilicate (BS) glass and soda lime (SL) glass which have different sodium content. The prepared layers were characterised by X-ray diffraction and UV-vis spectroscopy. The diffusion of Na+ from the substrate into the layers was determined by Glow Discharge Atomic Emission Spectroscopy. The photocatalytic activities of the films were assessed using two model pollutant test systems (resazurin/resorufin ink and stearic acid film), which appeared to correlate reasonably well. It was observed that TiO2 layer on SL glass has a brookite crystalline structure while the TiO2 layer on BS and Q glass has an anatase crystalline structure. On the other hand, the photodegradation of the model dye on TiO2 films deposited on Q and BS glass is about an order higher than on SL glass. The low sodium content of BS glass makes it the most suitable substrate for the deposition of photoactive sol gel TiO2 films. (C) 2011 Elsevier B.V. All rights reserved.