Eu mesma matei meu filho: do filicídio materno como poética trágica em Eurípides, Goethe e García Lorca

A presente tese investiga as poéticas do trágico nas obras teatrais de Eurípides (Grécia, c. 484 406 a.C.), Johann Wolfgang von Goethe (Alemanha, 1749 1832) e Federico García Lorca (Espanha, 1898 1936) e defende que, nos três autores, as concepções estéticas do trágico se constituem principalmente sobre a representação poética do filicídio materno. A antinomia trágica engendrada, metaforicamente, no assassinato da criança pelas mãos daquela que lhe deu a vida é tema de Medeia (431 a.C.), Tragédia de Margarida (1790) e Yerma (1934), obras fundamentais para compreender a visada trágica dos três poetas aqui, em respectivo, estudados. O conflito com o sagrado e com a razão, ao apontar para a afirmação trágica do corpo e do feminino, frequenta as três obras. O paralelismo entre as dimensões política e estética é, por conseguinte, patente nos três dramas, ao mesmo tempo em que cada um dos autores, com contexto e assinatura próprios, configura uma ideia estética acerca do trágico inteiramente singular. O diálogo entre literatura e filosofia, ou entre intuição e conceito, atravessa, nesta tese, a leitura do trágico na metáfora do filicídio. Sob tal perspectiva, a Medeia de Eurípides impõe-se no centro do debate entre socráticos e sofistas, e aborda temas, como o domínio das paixões sobre a razão, que também aliciaram autores como Platão, Aristóteles e Nietzsche. A Gretchentragödie, de Goethe, apresenta-se, por sua vez, como obra poética aonde convergem as mais calorosas discussões estéticas do moderno pensamento alemão, como as questões do sublime (Kant, Schiller) e da vontade (Schopenhauer). Yerma, de García Lorca, será também uma obra de convergência filosófica, expressando a nueva manera espiritualista que marca a última fase da produção lorquiana: a perspectiva trágica de Nietzsche, na afirmação do corpo como grande razão, assim como o diálogo de Lorca com o pensamento de Miguel de Unamuno sobre El sentimiento trágico de la vida, caracteriza uma espécie de tragédia às avessas, que nega o sagrado e afirma o trágico como síntese libertária do eu, do corpo e do feminino

Synopsis de la classification des larves et des nymphes de diptères chironomidae des ecosystèmes dulçaquicoles de l'Afrique de l'Ouest: clés de détermination des sous-familles, des tribus et des genres

Synopsis of this numerically very important Diptera category, which is dominant and consequently of relevance in most aquatic environments.

Thermal and electric conductivity of near-zero thermal expansion ZrW 2O8//ZrO2 composites

In this work, the microstructure, thermal and electric conductivity properties of near-zero thermal expansion ZrW2O8/ZrO2 and Al2O3 added ZrW2O8/ZrO2 composites were studied. Both the two composites exhibit very low thermal conductivity and the thermal conductivity decreases slightly as the temperature increases. The electric conductivity of the two composites increases with the increasing of the measurement temperature. The Al2O3 added ZrW2O8/ZrO2 composite has higher thermal and electric conductivity than ZrW2O8/ZrO2 composite. The most important factor which causes the difference of the thermal and electric conductivity of the composites is the porosity. (C) 2008 The Ceramic Society of Japan. All rights reserved.

Influence of oxygen plasma treatment on properties of ZrO2 films prepared by e-beam evaporation techniques

Zirconia films were prepared by e-beam evaporation, and oxygen plasma treatment was used to modify film properties. Spectrophotometry, x-ray diffractometry (XRD), and atomic force microscopy were used to characterize refractive index, extinction coefficient, rnicrostructure, and surface roughness, respectively. The experimental results indicate that both refractive index and extinction coefficient of the films were reduced slightly after oxygen plasma treatment, with the decrease of intrinsic stress and surface roughness. From XRD spectra, the intensity decrease of the T(110) diffraction peak was clearly observed after the treatment, which was caused by the restructuring of the film atoms. (C) 2008 Elsevier Ltd. All rights reserved.

Influences of CO2 laser annealing on mechanical and laser-induced damage properties of ZrO2 thin films

Zirconium dioxide (ZrO2) thin films were deposited on BK7 glass substrates by the electron beam evaporation method. A continuous wave CO2 laser was used to anneal the ZrO2 thin films to investigate whether beneficial changes could be produced. After annealing at different laser scanning speeds by CO2 laser, weak absorption of the coatings was measured by the surface thermal lensing (STL) technique, and then laser-induced damage threshold (LIDT) was also determined. It was found that the weak absorption decreased first, while the laser scanning speed is below some value, then increased. The LIDT of the ZrO2 coatings decreased greatly when the laser scanning speeds were below some value. A Nomarski microscope was employed to map the damage morphology, and it was found that the damage behavior was defect-initiated both for annealed and as-deposited samples. The influences of post-deposition CO2 laser annealing on the structural and mechanical properties of the films have also been investigated by X-ray diffraction and ZYGO interferometer. It was found that the microstructure of the ZrO2 films did not change. The residual stress in ZrO2 films showed a tendency from tensile to compressive after CO, laser annealing, and the variation quantity of the residual stress increased with decreasing laser scanning speed. The residual stress may be mitigated to some extent at proper treatment parameters. (c) 2007 Elsevier GmbH. All rights reserved.

Y2O3 stabilized ZrO2 thin films deposited by electron-beam evaporation: Optical properties, structure and residual stresses

This paper describes the preparation and the characterization Of Y2O3 stabilized ZrO2 thin films produced by electric-beam evaporation method. The optical properties, microstructure, surface morphology and the residual stress of the deposited films were investigated by optical spectroscopy, X-ray diffraction (XRD), scanning probe microscope and optical interferometer. It is shown that the optical transmission spectra of all the YSZ thin films are similar with those of ZrO2 thin film, possessing high transparency in the visible and near-infrared regions. The refractive index of the samples decreases with increasing of Y2O3 content. The crystalline structure of pure ZrO2 films is a mixture of tetragonal phase and monoclinic phase, however, Y2O3 stabilized ZrO2 thin films only exhibit the cubic phase independently of how much the added Y2O3 content is. The surface morphology spectrum indicates that all thin films present a crystalline columnar texture with columnar grains perpendicular to the substrate and with a predominantly open microporosity. The residual stress of films transforms tensile from compressive with the increasing Of Y2O3 molar content, which corresponds to the evolutions of the structure and packing densities. (C) 2008 Elsevier Ltd. All rights reserved.

Influence of ZrO2 in HfO2 on reflectance of HfO2/SiO2 multilayer at 248 nm prepared by electron-beam evaporation

Influence of ZrO2 in HfO2 on the reflectance of HfO2/SiO2 multilayer at 248 nm was investigated. Two kinds of HfO2 with different ZrO2 content were chosen as high refractive index material and the same kind of SiO2 as low refractive index material to prepare the mirrors by electron-beam evaporation. The impurities in two kinds of HfO2 starting coating materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum (GDMS) technology and secondary ion mass spectrometry (SIMS) equipment, respectively. It showed that between the two kinds of HfO2, either the bulk materials or their corresponding films, the difference of ZrO2 was much larger than that of the other impurities such as Ti and Fe. It is the Zr element that affects the property of thin films. Both in theoretical and in experimental, the mirror prepared with the HfO2 starting material containing more Zr content has a lower reflectance. Because the extinction coefficient of zirconia is relatively high in UV region, it can be treated as one kind of absorbing defects to influence the optical property of the mirrors. (C) 2008 Elsevier B.V. All rights reserved.

"Sanftes Monster Brüssel" – zur voraussichtlichen Repräsentation der Sozialwissenschaften in der zukünftigen europäischen Forschungsförderpolitik

Der Artikel befasst sich mit der europäischen Forschungsförderpolitik im Hinblick auf die Sozialwissenschaften. Derzeit laufen die Vorbereitungen für das nächste EU-Forschungsrahmenprogramm, das ab 2014 bis 2020 gültig sein wird. Es wird den Namen Horizon 2020 erhalten. Die Analyse skizziert die verschiedenen Aktivitäten, die nationale und europäische Erziehungswissenschaftsverbände entfaltet haben, um eine Repräsentation der Sozialwissenschaften im nächsten Rahmenprogramm zu gewährleisten. (DIPF/Orig.)

Influence of Sous Vide and Water Immersion Processing on Polyacetylene Content and Instrumental Color of Parsnip (Pastinaca sativa) Disks

The effect of blanching (95 ± 3 °C) followed by sous vide (SV) processing (90 °C for 10 min) on levels of two polyacetylenes in parsnip disks immediately after processing and during chill storage was studied and compared with the effect of water immersion (WI) processing (70 °C for 2 min.). Blanching had the greatest influence on the retention of polyacetylenes in sous vide processed parsnip disks resulting in significant decreases of 24.5 and 24% of falcarinol (1) and falcarindiol (2) respectively (p < 0.05). Subsequent SV processing did not result in additional significant losses in polyacetylenes compared to blanched samples. Subsequent anaerobic storage of SV processed samples resulted in a significant decrease in 1 levels (p < 0.05) although no change in 2 levels was observed (p > 0.05). 1 levels in WI processed samples were significantly higher than in SV samples (p = 0.05). 2 was particularly susceptible to aerobic storage following WI processing with losses of up to 70% occurring after 5 days storage. 1 type polyacetylene undergoes degradation such as oxidation, dehydrogenation when thermally treated forming oxidized form of 1 type molecules, in this case falcarindione, dehydrofalcarinol, dehydrofalcarinone. Thermal processing had a significant effect on instrumental color of parsnip samples compared to minimally processed in both SV and WI processed samples resulting in parsnip disks becoming darker, yellower and browner following processing and storage.