Direct Characterizing of Densification Mechanisms during Spark Plasma Sintering

Spark plasma sintering (SPS) is a convenient and rapid means of producing dense ceramic compacts. However, the mechanisms responsible for rapid densification have not been identified satisfactorily, with different studies using an indirect approach yielding varied values for the densification parameters. This study involved SPS in high purity nanocrystalline alumina with temperatures ranging from 1173 to 1423K and stresses from 25 to 100MPa. A direct approach, with analyses at a constant density, revealed a stress exponent of similar to 1 and an inverse grain size dependence of similar to 3, consistent with Coble creep process. Whereas the direct approach gives a stress exponent of similar to 1, the indirect approach used previously gives stress exponents ranging from similar to 2.2 to 3.5 with the same data, thereby revealing potentially spurious values of the densification parameters from conventional indirect approaches to characterizing densification. The rapid densification during SPS is related to the finer grain sizes retained with the rapid heating rates and the imposed stress that enhances the driving force for densification.

Influence of yttria and zirconia additions on spark plasma sintering of alumina composites

The mechanisms of densification and creep were examined during spark plasma sintering (SPS) of alumina doped with a low and high level of zirconia or yttria, over a temperature range of 1173-1573 K and stresses between 25 and 100 MPa. Large additions of yttria led clearly to in situ reactions during SPS and the formation of a yttrium-aluminum garnet phase. Dopants generally lead to a reduction in the densification rate, with substantial reductions noted in samples with similar to 5.5 vol% second phase. In contrast to a stress exponent of n similar to 1 for pure alumina, the doped aluminas displayed n similar to 2 corresponding to an interface-controlled diffusion process. The higher activation energies in the composites are consistent with previous data on creep and changes in the interfacial energies. The results reveal a compensation effect, such that an increase in the activation energy is accompanied by a corresponding increase in the pre-exponential term for diffusion.

Comportamiento agronómico por rebrote de seis genotipos de sorgo (Sorghum bicolor L. Moench) bajo dos diferentes dosis de fertilización NPK, en el Valle de Sébaco

Con el objetivo de determinar el potencial de rendimiento de grano por rebrote de seis genotipos de Sorgo (Sorghum bicolor L Moench), sometidos bajo dos diferentes dosis de fertilización NPK, se estableció un experimento de campo en Bloques Completos al Azar con 4 repeticiones en terrenos de la Estación Experimental “Raúl González A.” del Valle de Sebaco. Los resultados obtenidos indican que el hibrido HSN 89 con 6 Ton/Ha, fue el que presento el mayor rendimiento de grano por rebrote, ubicándose en segundo lugar los genotipos H887 v2 y SPV 475 con 4.98 y 4.53 Ton/HA respectivamente. Resultados similares fueron obtenidos en relación al rendimiento total de grano (durante las dos cosechas), con 12.25 Ton/Ha; 10.58 Ton/Ha y 9.90 Ton/Ha respectivamente. El incremento en la fertilización ejercio efecto en el rendimiento de grano obtenido durante el segundo ciclo del cultivo (rebrote), alcanzando los mayores rendimientos de 10.37 Ton/Ha, con la mayor fertilización. En relación a las demás características agronómicas como altura de planta; excersion de panoja; longitud de panoja y Acame, los genotipos se comportaron muy bien, a excepción de la variedad T 43 que mostro un 54% de Acame durante el segundo ciclo del cultivo (rebrote).

Estudio sobre algunas causas de baja germinación de tres variedades de sorgo (Sorghum bicolor L. Moench.)

Este trabajo se realizó en época de postrera de 1989, en terrenos del programa Recursos Genéticos Nicaragüenses (REGEN). Con el objetivo de determinar las causas de la baja germinación de tres variedades de sorgo que se producen en el país. Las variedades que se utilizaron durante la investigación fueron: El híbrido D-55, la variedad 1-43 y la Línea SPV-4/5. La razón por la cual se usaron estas variedades, es que dos de alias en esa época estaban en producción y la línea SPV-475 en proceso de liberación comercial. El diseño utilizado fue el de parcelas simples, tres en total con un área de 50 metros cuadrados cada una, se usó como parcela útil el área formada por los seis surcos centrales de cada parcela, dejando un metro de borde. Las variables a medir fueron: Los porcentajes de germinación al momento de la cosecha y después de tres meses de almacenamiento, también los porcentajes de germinación de las semillas afectadas por los diferentes hongos que la atacan en el campe y el porcentaje de semillas latentes. Los resultados indican que el híbrido D-55, tuvo un mayor porcentaje de semillas latentes, seguido de la variedad T-43 y SPV-475 (Pinolero-1). En relación a la infección, tanto las variedades como el híbrido en estudio resultaron fuertemente atacados por los hongos, siendo Fusarium el único que se comprobó afecto la viabilidad de la semilla. Con respecto a la humedad del grano para la cosecha, se recomienda cosechar temprano las variedades de color blanco y cosechar tarde las variedades de color rojo.

Spark plasma sintering of TiNi nano-powders for biological application

Nano-sized TiNi powder with an average size of 50nm was consolidated using spark plasma sintering (SPS) at 800 °C for 5min. A layer of anatase TiO 2 coating was formed on the sintered TiNi by chemical reaction with a hydrogen peroxide (H2O2) solution at 60 °C followed by heat treatment at 400 °C to enhance the bioactivity of the metal surface. Cell culture using osteoblast cells and a biomimetic test in simulated body fluid proved the biocompatibility of the chemically treated SPS TiNi. © IOP Publishing Ltd.

Surface-Bound Selectin-Ligand Binding Is Regulated By Carrier Diffusion

Two-dimensional (2D) kinetics of receptor-ligand interactions governs cell adhesion in many biological processes. While the dissociation kinetics of receptor-ligand bond is extensively investigated, the association kinetics has much less been quantified. Recently receptor-ligand interactions between two surfaces were investigated using a thermal fluctuation assay upon biomembrane force probe technique (Chen et al. in Biophys J 94:694-701, 2008). The regulating factors on association kinetics, however, are not well characterized. Here we developed an alternative thermal fluctuation assay using optical trap technique, which enables to visualize consecutive binding-unbinding transition and to quantify the impact of microbead diffusion on receptor-ligand binding. Three selectin constructs (sLs, sPs, and PLE) and their ligand P-selectin glycoprotein ligand 1 were used to conduct the measurements. It was indicated that bond formation was reduced by enhancing the diffusivity of selectin-coupled carrier, suggesting that carrier diffusion is crucial to determine receptor-ligand binding. It was also found that 2D forward rate predicted upon first-order kinetics was in the order of sPs > sLs > PLE and bond formation was history-dependent. These results further the understandings in regulating association kinetics of surface-bound receptor-ligand interactions.

Measurement of the band bending and surface dipole at chemically functionalized Si(111)/vacuum interfaces

The core-level energy shifts observed using X-ray photoelectron spectroscopy (XPS) have been used to determine the band bending at Si(111) surfaces terminated with Si-Br, Si-H, and Si-CH₃ groups, respectively. The surface termination influenced the band bending, with the Si 2p_3/2 binding energy affected more by the surface chemistry than by the dopant type. The highest binding energies were measured on Si(111)-Br (whose Fermi level was positioned near the conduction band at the surface), followed by Si(111)-H, followed by Si(111)-CH₃ (whose Fermi level was positioned near mid-gap at the surface). Si(111)-CH₃ surfaces exposed to Br₂(g) yielded the lowest binding energies, with the Fermi level positioned between mid-gap and the valence band. The Fermi level position of Br₂(g)-exposed Si(111)-CH₃ was consistent with the presence of negatively charged bromine-containing ions on such surfaces. The binding energies of all of the species detected on the surface (C, O, Br) shifted with the band bending, illustrating the importance of isolating the effects of band bending when measuring chemical shifts on semiconductor surfaces. The influence of band bending was confirmed by surface photovoltage (SPV) measurements, which showed that the core levels shifted toward their flat-band values upon illumination. Where applicable, the contribution from the X-ray source to the SPV was isolated and quantified. Work functions were measured by ultraviolet photoelectron spectroscopy (UPS), allowing for calculation of the sign and magnitude of the surface dipole in such systems. The values of the surface dipoles were in good agreement with previous measurements as well as with electronegativity considerations. The binding energies of the adventitious carbon signals were affected by band bending as well as by the surface dipole. A model of band bending in which charged surface states are located exterior to the surface dipole is consistent with the XPS and UPS behavior of the chemically functionalized Si(111) surfaces investigated herein.

Does rating shopping exist in spanish securitization issues?

[EN] Debt issue credit ratings can lead to conflicts of interest as the issuer itself is entrusted with contracting and compensating the rating agency. Into the bargain, the credit rating agency may be involved in designing the issues that the same agency subsequently rates. Credit rating agencies thus could have incentives to rate issues advantageously. Given the economic importance of this issue, in this paper we have proposed to analyze this phenomenon, known as rating shopping in academic literature, for Spanish market securitization issues for the period of time comprehensive from January 1993 to December 2011. In sum 3,665 published ratings are been analysed, for an issued nominal amount of 791,090 million Euros. The results show an association between the credit rating agency contracted and the mean rating awarded. Significant differences are observed in the ratings associated to the contracting manager (or special purpose vehicle SPV- manager firm), to the number of ratings or to the type of collateral. Furthermore, a pattern compatible with rating shopping was observed for some types of collateral: abnormally high market shares associated with certain agencies awarding unusually generous ratings. However, this phenomenon is not seen to be widespread on the rating market associated to Spanish securitization issues.

A large-area photolithography technique based on surface plasmons leakage modes

An atomic force microscope (AFM) assisted surface plasmons leakage radiation photolithography technique has been numerically demonstrated by using two-dimensional finite-difference time-domain (2D-FDTD) method. With the aid of a metallic AFM tip, particular characteristic of the Kretstchmann configuration to excite surface plasmons (SPs) is utilized to achieve large-area patterns with high spatial resolution and contrast, the photoresist could be exposed with low power laser due to the remarkable local field enhancement at the metal/dielectric interface and the resonant localized SPs modes near the tip. Good tolerance on the film thickness and incident angle has been obtained, which provides a good practicability for experiments. This photolithography technique proposed here can realize large-area, high-resolution, high-contrast, nondestructive, arbitrary-structure fabrication of nanoscale devices. (c) 2007 Elsevier B.V. All rights reserved.

不同葡萄糖/果糖类型桃果实发育期间可溶性糖的变化规律和代谢

以成熟果实中不同葡萄糖/果糖（G/F）类型的6个桃品种（G/F≈1品种：‘冈山白’、‘山一白桃’和‘燕红’;高G/F品种：‘张黄7号’、‘龙246’和‘临白7号’）为试材，采用高效液相色谱法测定果实发育期果实和叶片中可溶性糖含量，并在盛花后74 d或101 d测定了‘冈山白’、‘山一白桃’、‘张黄 7号’和‘龙 246’新梢韧皮部中可溶性糖的含量;测定了果实发育过程中‘山一白桃’和‘临白7号’果实中的可溶性糖和淀粉代谢相关酶的活性。研究成熟果实中不同G/F类型桃果实内G/F差异的部位和时期;分析桃果实内G/F差异的可溶性糖代谢调控机理。 成熟果实中不同G/F类型桃果实中均以蔗糖作为主要碳水化合物积累形式，花后43–85 d蔗糖含量很低，随后持续快速积累直至果实成熟;花后43–85 d山梨醇有升高趋势，在果实成熟前40 d左右迅速降低;葡萄糖和果糖含量在果实发育早期较高，之后逐渐降低;但两类不同G/F桃在整个果实发育过程中G/F值与果实成熟时相似。叶片中贮藏的可溶性糖主要是蔗糖和山梨醇，在果实整个发育期间，G/F≈1品种叶片中G/F约1-3，而高G/F品种叶片中G/F约为2-7。G/F≈1品种‘冈山白’和‘山一白桃’与高G/F品种‘张黄 7号’和‘龙 246’韧皮部中山梨醇占总可溶性糖47-63％，显著高于蔗糖、葡萄糖和果糖的含量，G/F为0.8-0.91，且两类不同G/F桃品种间G/F值不存在显著差异。 成熟果实中G/F≈1类型的‘山一白桃’和高G/F值类型的‘临白7号’整个果实发育过程中，葡萄糖、山梨醇和淀粉的含量在这两个品种间一般没有明显差异;‘山一白桃’果实中的果糖含量显著高于‘临白7号’果实中的果糖;果实最后迅速生长期，‘山一白桃’果实中的蔗糖明显高于‘临白7号’。‘山一白桃’和‘临白7号’果实中的NAD+依赖型山梨醇脱氢酶（NAD+-SDH）活性低，两者有相似的变化趋势，一般无显著差异。‘临白7号’果实中的NADP+依赖型山梨醇脱氢酶（NADP+-SDH）和山梨醇氧化酶（SOX）活性一直高于‘山一白桃’，两者NADP+-SDH和SOX的活性分别在花后93-123 d和花后43-93 d有显著差异。‘临白7号’果实中的果糖激酶（FK）活性一般高于‘山一白桃’。花后43-93 d，‘临白7号’果实中的磷酸蔗糖合成酶（SPS）和蔗糖合成酶（SS）活性一般显著‘山一白桃’。果实最后迅速生长期，蔗糖快速积累，葡萄糖、果糖、山梨醇和淀粉含量迅速降低，同时伴随有SPS和SS活性的迅速升高。在整个果实发育过程中，两个品种果实中的淀粉酶活性较高，其果实中的淀粉含量和淀粉酶活性都有明显的下降趋势。 研究结果表明，整个果实发育过程中桃果实中均存在G/F≈1和高G/F现象，光合产物在韧皮部的运输对桃果实的G/F没有显著的影响，果实中G/F的差异主要由于果实内糖代谢差异所导致。‘临白7号’果实中山梨醇向果糖方向的转化能力与‘山一白桃’一般没有显著差异，由于不同时期较高的NADP+-SDH和SOX活性，使得山梨醇向葡萄糖方向的转化能力明显高于‘山一白桃’，同时，‘临白7号’果实中的FK活性一般高于‘山一白桃’，因此导致‘临白7号’果实中G/F高于‘山一白桃’。

Comparison of media and methods for the detection and enumeration of Clostridium perfringens in seafoods

Three direct plating methods and two most probable number (MPN) procedures were compared for the enumeration of Clostridium perfringens in seafoods the sulfitecycloserine (SC) agar, sulfite-polymyxin-sulfadiazine (SPS) agar, tryptone-sulfite- neomycin (TSN) agar, LS medium MPN procedure and iron milk MPN procedure. Isolates were confirmed as C. perfringens. The two MPN procedures compared very well with the three plating media tested with stock culture of C. perfringens from our laboratory collection and the reference strain NCIB 6125. But in fish samples, the two liquid media were found to be more sensitive and hence the MPN procedure using LS medium for the detection of C. perfringens in seafoods is suggested.

TRANSIENT SCANNING ELECTRON BEAM ANNEALING METHODS USED TO STUDY DIFFUSION AND DEFECTS IN IMPLANTED SILICON.

Rapid thermal annealing of arsenic and boron difluoride implants, such as those used for source/drain regions in CMOS, has been carried out using a scanning electron beam annealer, as part of a study of transient diffusion effects. Three types of e-beam anneal have been performed, with peak temperatures in the range 900 -1200 degree C; the normal isothermal e-beam anneals, together with sub-second fast anneals and 'dual-pulse' anneals, in which the sample undergoes an isothermal pre-anneal followed by rapid heating to the required anneal temperature is less than 0. 5s. The diffusion occuring during these anneal cycles has been modelled using SPS-1D, an implant and diffusion modelling program developed by one of the authors. This has been modified to incorporate simulated temperature vs. time cycles for the anneals. Results are presented applying the usual equilibrium clustering model, a transient point-defect enhancement to the diffusivity proposed recently by Fair and a new dynamic clustering model for arsenic. Good agreement with SIMS measurements is obtained using the dynamic clustering model, without recourse to a transient defect model.

原生动物生物指数的进一步验证及其适用性分析

利用意大利河流TorrenteStirone和Parma的原生动物数据及水质化学数据 ,对作者所建立的原生动物生物指数的适用性进行了验证 ,结果表明 ,所得CPV与化学综合污染指数有显著的相关 ,说明建立的生物指数有广泛的适用性。文中对SPV的使用方法、适用范围、应注意的问题进行了分析和讨论。

Cloning, characterization and promoter analysis of common carp hairy/Enhancer-of-split-related gene, her6

Some members of hairy/Enhancer-of-split-related gene (HES) family have important effects on axial mesoderm segmentation and the establishment and maintenance of the somite fringe. In fishes. the her6 gene, a member of the HES family, is the homologue Of heS1 in mammals and chicken. In this study, the her6 gene and its full-length cDNA from the common carp (Cyprinus carpio) were isolated and characterized. The genomic sequence of common carp her6 is approximately 1.7 kb. with four exons and three introns, and the full-length cDNA of 1314 bp encodes a Putative polypeptide of 271 amino acids. To analyse the promoter sequence of common carp her6. sequences of various lengths upstream from the transcription initiation site of her6 were fused to enhanced green fluorescent. protein gene (eGFP) and introduced into zebrafish embryos by microinjection to generate transgenic embryos. Our results show that the upstream sequence of 500 bp can direct highly efficient and tissue-specific expression of eGFP in zebrafish embryos. whereas a fragment of 200 bp containing the TATA box and a partial suppressor of hairless paired site sequence (SPS) is not sufficient to drive eGFP expression in zebrafish embryos.

Use of the aquatic protozoa to formulate a community biotic index for an urban water system

Protozoan were collected from 16 stations in water system of Changde City (China) using the PFU method. Sampling programs were conduced on a yearly basis, with seasonal frequency at diverse sites in the water system and 488 species of protozoa was identified. At the same time, Water sampling from these stations was conducted and various water chemical parameters, including DO, COD, BOD5, NH3, TP, and Volatile Phenol, were analyzed. The aim of the research was, on one hand, using chemical method to take an investigation to the water pollution status of Changde City; on the other hand, using protozoan to make an evaluation to the water quality. With the chemical water parameters and protozoa data, a biotic index was derived for the investigated region. The species pollution value (SPV) of 469 protozoa species was established, and the community pollution value (CPV) calculated from SPV was used to evaluate water quality. The method of the biotic index was tested and the result showed that CPV calculated from SPV had a close correlation with the degree of water pollution (p < 0.00001). This indicated that the method of the biotic index is reliable. The water quality degrees divided by CPV were suggested. (c) 2004 Elsevier B.V. All rights reserved.