Ümmet-i İslâm teșkilâtı esasen nasıldır? bugün nasıl olmalı? /

Özege, M.S. Eski harflerle,

Külliyât-ı Şeyhul'İslâm Musa Kâzım : dinî, ictimaî makaleler.

Özege, M. S. Eski harflerle,

Sahaif-i güzide-yi İslâm /

Özege, M.S. Eski harflerle,

Cevahirü'l-İslâm.

Özege, M.S. Eski harflerle,

Caracterização mecânica da liga AlSi10Mg obtida por SLM para aplicação em componentes automóveis

Este projeto visa efetuar a caracterização mecânica da liga AlSi10Mg obtida por SLM (Fundição de Metal por Laser) para aplicação em componentes automóveis. Ao longo deste projeto é efetuada uma pesquisa bibliográfica das tecnologias de fabrico rápido mais frequentemente aplicadas ao processamento de alumínios, abordando de forma específica a tecnologia SLM, bem como a influência dos seus parâmetros no processamento de ligas de alumínio. Será levado a cabo um estudo comparativo da liga AlSi10Mg fabricada por fundição em molde permanente com a obtida por SLM, analisando-se a microestrutura das ligas, bem como as suas propriedades mecânicas, através da realização de ensaios de dureza, tração, análise dinâmico-mecânica e fadiga. Deste modo será possível perceber as diferenças entre o comportamento mecânico da liga obtida por SLM e a liga obtida pelo método convencional. Em resultado do estudo realizado, observou-se que a liga AlSi10Mg obtida por SLM apresenta uma microestrutura muito mais fina do que a liga fabricada por fundição em molde permanente, o que lhe permite ter um comportamento mecânico superior na maioria dos ensaios mecânicos realizados. Assim, é possível aplicar a tecnologia SLM ao fabrico de componentes em alumínio no sector automóvel, visto ser possível obter propriedades mecânicas superiores ou equivalentes aos componentes fabricados pelos processos de fabrico convencionais.

Process Gas Infiltration in Inconel 718 Samples during SLM Processing

Argon infiltration is a well-known problem of hot isostatic pressed components. Thus, the argon content is one quality attribute which is measured after a hot isostatic pressing (HIP) process. Since the Selective Laser Melting (SLM) process takes place under an inert argon atmosphere; it is imaginable that argon is entrapped in the component after SLM processing. Despite using optimized process parameters, defects like pores and shrink holes cannot be completely avoided. Especially, pores could be filled with process gas during the building process. Argon filled pores would clearly affect the mechanical properties. The present paper takes a closer look at the porosity in Inconel 718 samples, which were generated by means of SLM. Furthermore, the argon content of the powder feedstock, of samples made by means of SLM, of samples which were hot isostatic pressed after the SLM process, and of conventionally manufactured samples were measured and compared. The results showed an increased argon content in the Inconel 718 samples after SLM processing compared to conventional manufactured samples.

Plataforma de simulación de aberraciones ópticas vía implementación de las características de un SLM y reconstrucción de fase usando algoritmos basados en los sensores de Hartmann-Shack

Dada la importancia que hoy día presenta dentro del ámbito de la óptica, la implementación y conocimiento de dispositivos capaces tanto de generar aberraciones ópticas bien caracterizadas como de censarlas, se presenta a lo largo de este trabajo el desarrollo de una interfaz gráfica en MATLAB, que permita simular el funcionamiento tanto de un sensor de frente de onda de Hartamnn-Shack (HS), así como la simulación de dispositivos capaces de modificar frentes de onda como los SLM, adicionando algoritmos de propagación y cálculo de centroides -- Para ello, se implementarán en primer lugar máscaras de fase que generen frentes de onda aberrados a partir de la modulación en fase de moduladores espaciales de luz o SLM, tanto a través de funciones lente de primer orden en representación de las aberraciones constantes, como de fase cuadrática en representación de las aberraciones de bajo orden y adicionalmente como combinaciones lineales de polinomios de Zernike -- Todo lo anterior se simulará teniendo en cuenta las características técnicas de los SLM, como lo son el número de pixeles en x y en y, el tamaño de estos y la curva de calibración de los moduladores espaciales, tanto para una relación lineal como para una relación no lineal -- Posteriormente se simularán las dos propagaciones sufridas por los haces de luz desde el SLM hasta el CCD (dispositivo de carga acoplada), pasando a través de la matriz de multilentes del HS (MLA), a partir de la implementación de algoritmos de propagación de un solo paso, que nos permitirán observar sobre el plano del CDD el mapa de spots necesario para el censado de las superficies -- Continuaremos con la construcción de algoritmos para determinar los centroides de dicho mapa y sus respectivas coordenadas, seguiremos con la implementación de algoritmos de reconstrucción modal empleados por sensores de frente de onda de Hartmann-Shack, y finalmente compararemos el grado de error existente entre las superficies generadas y las superficies censadas a través del cálculo de su error cuadrático medio

Dependence of residual amplitude noise in electro-optic phase modulators on the intensity distribution of the incident field

Our results demonstrate that photorefractive residual amplitude modulation (RAM) noise in electro-optic modulators (EOMs) can be reduced by modifying the incident beam intensity distribution. Here we report an order of magnitude reduction in RAM when beams with uniform intensity (flat-top) profiles, generated with an LCOS-SLM, are used instead of the usual fundamental Gaussian mode (TEM00). RAM arises from the photorefractive amplified scatter noise off the defects and impurities within the crystal. A reduction in RAM is observed with increasing intensity uniformity (flatness), which is attributed to a reduction in space charge field on the beam axis. The level of RAM reduction that can be achieved is physically limited by clipping at EOM apertures, with the observed results agreeing well with a simple model. These results are particularly important in applications where the reduction of residual amplitude modulation to 10^-6 is essential.

Noise levels in a General Surgical Ward : a descriptive study

Aims and objectives.  This study was undertaken to measure and analyse levels of acoustic noise in a General Surgical Ward. Method.  Measurements were undertaken using the Norsonic 116 sound level meter (SLM) recording noise levels in the internationally agreed ‘A’ weighted scale. Noise level data and observational data as to the number of staff present were obtained and recorded at 5-min intervals over three consecutive days. Results.  Results of noise level analysis indicated that mean noise level within this clinical area was 42.28 dB with acute spikes reaching 70 dB(A). The lowest noise level attained was that of 36 dB(A) during the period midnight to 7 a.m. Non-parametric testing, using Spearman's Rho (two-tailed), found a positive relationship between the number of staff present and the level of noise recorded, indicating that the presence of hospital personnel strongly influences the level of noise within this area. Relevance to clinical practice.  Whilst the results of this may seem self-evident in many respects the problems of excessive noise production and the exposure to it for patients, hospital personnel and relatives alike continues unabated. What must be of concern is the psychophysiological effects excessive noise exposure has on individuals, for example, decreased wound healing, sleep deprivation and cardiovascular stimulation.

Airway Inflammation and Bronchial Hyperresponsiveness in Elite Cross-Country Skiers and in Patients with Newly Diagnosed Asthma: A Bronchial Biopsy Study

The objective of these studies was to evaluate possible airway inflammation and remodeling at the bronchial level in cross-country skiers without a prior diagnosis of asthma, and relate the findings to patients with mild chronic asthma and patients with newly diagnosed asthma. We also studied the association of airway inflammatory changes and bronchial hyperresponsivess (BHR), and treatment effects in cross-country skiers and in patients with newly diagnosed asthma. Bronchial biopsies were obtained from the subjects by flexible bronchoscopy, and the inflammatory cells (eosinophils, mast cells, T-lymphocytes, macrophages, and neutrophils) were identified by immunohistochemistry. Tenascin (Tn) immunoreactivity in the bronchial basement membrane (BM) was identified by immunofluorescence staining. Lung function was measured with spirometry, and BHR was assessed by methacholine (skiers) or histamine (asthmatics) challenges. Skiers with BHR and asthma-like symptoms were recruited to a drug-intervention study. Skiers were given treatment (22 weeks) with placebo or budesonide (400 µg bid). Patients with newly diagnosed asthma were given treatment for 16 weeks with placebo, salmeterol (SLM) (50 µg bid), fluticasone propionate (FP) (250 µg bid), or disodium cromoglicate (DSCG) (5 mg qid). Bronchial biopsies were obtained at baseline and at the end of the treatment period. In the skiers a distinct airway inflammation was evident. In their bronchial biopsy specimens, T-lymphocyte, macrophage, and eosinophil counts were, respectively greater by 43-fold (P<0.001), 26-fold (P<0.001, and 2-fold (P<0.001) in skiers, and by 70-fold (p>0.001), 63-fold (P<0.001), and 8-fold (P<0.001) in asthmatic subjects than in controls. In skiers, neutrophil counts were more than 2-fold greater than in asthmatic subjects (P<0.05). Tn expression was higher in skiers than in controls and lower in skiers than in mild asthmatics. No significant changes were seen between skiers with or without BHR in the inflammatory cell counts or Tn expression. Treatment with inhaled budesonide did not attenuate asthma-like symptoms, the inflammatory cell infiltration, or BM Tn expression in the skiers. In newly diagnosed asthmatic patients, SLM, FP, and DSCG reduced asthma symptoms, and need for rescue medication (P<0.04). BHR was reduced by doubling doses 2.78, 5.22, and 1.35 respectively (all P<0.05). SLM and placebo had no effect on cell counts or Tn expression. FP and DSCG reduced eosinophil counts in the bronchial biopsy specimens (P<0.02 and <0.048, respectively). No significant change in tenascin expression appeared in any treatment group. Regarding to atopy, no significant differences existed in the inflammatory cell counts in the bronchial mucosa of subjects with newly diagnosed asthma or in elite cross country skiers. Tn expression in the BM was significantly higher in atopic asthma than in those with nonatopic asthma. Airway inflammation occurred in elite cross-country skiers with and without respiratory symptoms or BHR. Their inflammatory cell pattern differed from that in asthma. Infiltration with eosinophils, macrophages, and mast cells was milder, but lymphocyte counts did not differ from counts in asthmatic airways. Neutrophilic infiltration was more extensive in skiers than in asthmatics. Remodeling took place in the skiers’ airways, as reflected by increased expression of BM tenascin These inflammatory changes and Tn expression may be caused by prolonged exposure of the lower airways to inadequately humidified cold air. In skiers inflammatory changes and remodeling were not reversed with anti-inflammatory treatment. In contrast, in patients with newly diagnosed asthma, anti-inflammatory treatment did attenuate eosinophilic inflammation in the bronchial mucosa. In skiers, anti-inflammatory treatment did not attenuate BHR as it did in asthmatic patients. The BHR in skiers was attenuated spontaneously during placebo treatment, with no difference from budesonide treatment. Lower training intensity during the treatment period may explain this spontaneous decrease in BHR. The origin of BHR probably differs in skiers and in asthmatics. No significant association between BHR and inflammatory cell counts or between BHR and Tn expression was evident in cross-country skiers or asthmatic subjects. Airway remodeling differed between atopic and nonatopic asthma. As opposed to nonatopic asthma, Tn expression was higher in atopic asthma and is related to inflammatory cell densities.

Applications of reverse saturable absorbers in laser science

A variety of applications exist for reverse saturable absorbers (RSAs) in the area of optical pulse processing and computing. An RSA can be used as power limiter/pulse smoother and energy limiter/pulse shortner of laser pulses. A combination of RSA and saturable absorber (SA) can be used for mode locking and pulse shaping between high power laser amplifiers in oscillator amplifier chain. Also, an RSA can be used for the construction of a molecular spatial light modulator (SLM) which acts as an input/output device in optical computers. A detailed review of the theoretical studies of these processes is presented. Current efforts to find RSAs at desired wavelength for testing these theoretical predictions are also discussed.

Identification of Nonlinear Systems Through Time-Frequency Filtering Technique

In the previous paper, a class of nonlinear system is mapped to a so-called skeleton linear model (SLM) based on the joint time-frequency analysis method. Behavior of the nonlinear system may be indicated quantitatively by the variance of the coefficients of SLM versus its response. Using this model we propose an identification method for nonlinear systems based on nonstationary vibration data in this paper. The key technique in the identification procedure is a time-frequency filtering method by which solution of the SLM is extracted from the response data of the corresponding nonlinear system. Two time-frequency filtering methods are discussed here. One is based on the quadratic time-frequency distribution and its inverse transform, the other is based on the quadratic time-frequency distribution and the wavelet transform. Both numerical examples and an experimental application are given to illustrate the validity of the technique.

Time-Frequency Analysis of Nonlinear Systems: The Skeleton Linear Model and the Skeleton Curves

The joint time-frequency analysis method is adopted to study the nonlinear behavior varying with the instantaneous response for a class of S.D.O.F nonlinear system. A time-frequency masking operator, together with the conception of effective time-frequency region of the asymptotic signal are defined here. Based on these mathematical foundations, a so-called skeleton linear model (SLM) is constructed which has similar nonlinear characteristics with the nonlinear system. Two skeleton curves are deduced which can indicate the stiffness and damping in the nonlinear system. The relationship between the SLM and the nonlinear system, both parameters and solutions, is clarified. Based on this work a new identification technique of nonlinear systems using the nonstationary vibration data will be proposed through time-frequency filtering technique and wavelet transform in the following paper.

Implementación del Sistema de Alerta Temprana para el Monitoreo de la Roya del Cafeto (Hemileia vastatrix Berkeley & Broome) y Prevenir Epidemias Futuras en Nicaragua: Informe de Pasantías realizadas en el Instituto de Protección y Sanidad Agropecuaria (IPSA)

El cambio climático ha modificado el comportamiento de plagas en cultivos, provocando incidencia en momentos no previstos, afectando la calidad y rendimientos de los mismos. El cultivo del cafeto, es uno de los principales rubros de exportación en la regi ón Centroamericana y República Dominicana. No exento del cambio climático este rubro ha sufrido altos y bajos desde el punto de vista fitosanitario, precios del mercado, afectando de manera directa a grupos vulnerables que viven en zonas rurales y para qui enes las divisas provenientes de la caficultura representan su única fuente de ingreso. El reciente repunte del hongo de la roya ( Hemileia vastatrix Berkeley & Broome ) en las zonas de mayor producción ha provocado alarma entre los pequeños productores sie ndo estos las más vulnerables por los bajos rendimientos por área, sumado a una seria de consecuencias en los niveles económicos, sociales y ambientales. El sistema de alerta temprana de café (SATCAFE), que actualmente se está implementado en los países Ce ntroamericanos (Guatemala, Nicaragua, Costa Rica, Panamá) y República Dominicana, mediante el apoyo técnico de la oficina sub regional de FAO/SLM, está contribuyendo con los esfuerzos emprendidos por los gobiernos a través de los ministerios de agricultura , institutos de café, mediante el levantamiento de información de datos cuantitativos del comportamiento de la roya y broca del cafeto y el impacto de esta en la producción y la seguridad alimentaria y nutricional de las familias productoras

Fluctuation characteristics of arc voltage and jet flow in a non-transferred dc plasma generated at reduced pressure

A torch with a set of inter-electrode inserts between the cathode and the anode/nozzle with a wide nozzle exit was designed to generate plasma jets at chamber pressures of 500–10 000 Pa. The variation of the arc voltage was examined with the change in working parameters such as gas flow rate and chamber pressure. The fluctuation in the arc voltage was recorded with an oscilloscope, and the plasma jet fluctuation near the torch exit was observed with a high-speed video camera and detected with a double-electrostatic probe. Results show that the 300 Hz wave originated from the tri-phase rectified power supply was always detected under all generating conditions. Helmholtz oscillations over 3000 Hz was detected superposed on the 300 Hz wave at gas flow rates higher than 8.8 slm with a peak to valley amplitude lower than 5% of the average voltage value. No appreciable voltage fluctuation caused by the irregular arc root movement is detected, and mechanisms for the arc voltage and jet flow fluctuations are discussed.