A FEM-based model to study the behaviour of corroded RC beams shear repaired by NSM CFRP rods technique

This paper presents the main features of finite element FE numerical model developed using the computer code FEMIX to predict the near-surface mounted NSM carbon-fiber-reinforced polymer CFRP rods shear repair contribution to corroded reinforced concrete RC beams. In the RC beams shear repaired with NSM technique, the Carbon Fibre Reinforced Polymer (CFRP) rods are placed inside pre-cut grooves onto the concrete cover of the RC beam’s lateral faces and are bonded to the concrete with high epoxy adhesive. Experimental and 3D numerical modelling results are presented in this paper in terms of load-deflection curves, failure modes and slip information of the tensile steel bars for 4 short corroded beams: two corroded beams (A1CL3-B and A1CL3-SB) and two control beams (A1T-B and A1T-SB), the beams noted with B were let repaired in bending only with NSM CFRP rods while the ones noted with SB were repaired in both bending and shear with NSM technique. The corrosion of the tensile steel bars and its effect on the shear capacity of the RC beams was discussed. Results showed that the FE model was able to capture the main aspects of the experimental load-deflection curves of the RC beams, moreover it has presented the experimental failure modes and FE numerical modelling crack patterns and both gave similar results for non-shear repaired beams which failed in diagonal tension mode of failure and for shear-repaired beams which failed due to large flexural crack at the middle of the beams along with the concrete crushing, three dimensional crack patterns were produced for shear-repaired beams in order to investigate the splitting cracks occurred at the middle of the beams and near the support.

Plastic-damage smeared crack model to simulate the behaviour of structures made by cement based materials

This work proposes a constitutive model to simulate nonlinear behaviour of cement based materials subjected to different loading paths. The model incorporates a multidirectional fixed smeared crack approach to simulate crack initiation and propagation, whereas the inelastic behaviour of material between cracks is treated by a numerical strategy that combines plasticity and damage theories. For capturing more realistically the shear stress transfer between the crack surfaces, a softening diagram is assumed for modelling the crack shear stress versus crack shear strain. The plastic damage model is based on the yield function, flow rule and evolution law for hardening variable, and includes an explicit isotropic damage law to simulate the stiffness degradation and the softening behaviour of cement based materials in compression. This model was implemented into the FEMIX computer program, and experimental tests at material scale were simulated to appraise the predictive performance of this constitutive model. The applicability of the model for simulating the behaviour of reinforced concrete shear wall panels submitted to biaxial loading conditions, and RC beams failing in shear is investigated.

Survey and dynamic behaviour of the Our Lady of Conception Church, Portugal

The Our Lady of Conception church is located in village of Monforte (Portugal) and is not in use nowadays. The church presents structural damage and, consequently, a study was carried out. The study involved the survey of the damage, dynamic identification tests under ambient vibration and the numerical analysis. The church is constituted by the central nave, the chancel, the sacristy and the corridor to access the pulpit. The masonry walls present different thickness, namely 0.65 m in the chancel, 0.70 m in the sacristy, 0.92 in the central nave and 0.65 m in the corridor. The masonry walls present 8 buttresses with different dimensions. The total longitudinal and transversal dimensions of the church are equal to 21.10 m and 14.26 m, respectively. The survey of the damage showed that, in general, the masonry walls are in good conditions, with exception of the transversal walls of the nave, which present severe cracks. The arches of the vault presents also severe cracks along the central nave. As consequence, the infiltrations have increased the degradation of the vault and paintings. Furthermore, the foundations present settlements in the Southwest direction. The dynamic identification test were carried out under the action of ambient excitation of the wind and using 12 piezoelectric accelerometers of high sensitivity. The dynamic identification tests allowed to estimate the dynamic properties of the church, namely frequencies, mode shapes and damping ratios. A FEM numerical model was prepared and calibrated, based on the first four experimental modes estimated in the dynamic identification tests. The average error between the experimental and numerical frequencies of the first four modes is equal to 5%. After calibration of the numerical model, pushover analyses with a load pattern proportional to the mass, in the transversal and longitudinal direction of the church, were performed. The results of the analysis numerical allow to conclude that the most vulnerable direction of the church is in the transversal one and the maximum load factor is equal to 0.35.

Evaluation of the performance of recycled textile fibres in the mechanical behaviour of a gypsum and cork composite material

Given the need for using more sustainable constructive solutions, an innovative composite material based on a combination of distinct industrial by-products is proposed aiming to reduce waste and energy consumption in the production of construction materials. The raw materials are thermal activated flue-gas desulphurization (FGD) gypsum, which acts as a binder, granulated cork as the aggregate and recycled textile fibres from used tyres intended to reinforce the material. This paper presents the results of the design of the composite mortar mixes, the characterization of the key physical properties (density, porosity and ultrasonic pulse velocity) and the mechanical validation based on uniaxial compressive tests and fracture energy tests. In the experimental campaign, the influence of the percentage of the raw materials in terms of gypsum mass, on the mechanical properties of the composite material was assessed. It was observed that the percentage of granulated cork decreases the compressive strength of the composite material but contributes to the increase in the compressive fracture energy. Besides, the recycled textile fibres play an important role in the mode I fracture process and in the fracture energy of the composite material, resulting in a considerable increase in the mode I fracture energy.

Human capital in export-based internationalisation. "Managerial determinants and their influence upon the export behaviour of the firm: four case-studies of catalan exporting SMEs"

Export activities are a major source of economic growth and are considered important both at the national level and for individual businesses. Moreover, in the case of SMEs, they gain particular relevance, exporting being the most common foreign market entry mode for these firms. The decision maker’s role in the export activity is crucial, particularly in the case of SMEs. However, the extant literature on internationalization is characterized by a lack of consensus among scholars as to what constitutes the managerial factor in determining exporting. Therefore, this study focuses on the following issue: Which are the decision maker’s characteristics and perceptions that may influence the export behaviour of Catalan SMEs? To address this question a multiple case study method is applied across four Catalan exporting SMEs. The methodology chosen for analysing the empirical data is relying on the proposition testing approach while the investigation is conducted including both within and cross-case analysis. The findings show that high educational level, language skills, high risk tolerance, innovativeness as well as strongly perceived export stimuli as compared to low and easy to overcome export barriers positively influence the export involvement and development of SMEs. The study provides further insights into the research topic by jointly studying managerial characteristics and perceptions. Additionally, the majority of research on exporting topics has been carried out in the USA, so there is a clear need of investigation in the field in other countries, moreover in Spain where the exporting activities have not been as widely studied.

Present development concerning antimalarial activity of phospholipid metabolism inhibitors with special reference to in vivo activity

The systematic screening of more than 250 molecules against Plasmodium falciparum in vitro has previously shown that interfering with phospholipid metabolism is lethal to the malaria parasite. These compounds act by impairing choline transport in infected erythrocytes, resulting in phosphatidylcholine de novo biosynthesis inhibition. A thorough study was carried out with the leader compound G25, whose in vitro IC50 is 0.6 nM. It was very specific to mature parasites (trophozoïtes) as determined in vitro with P. falciparum and in vivo with P. chabaudi -infected mice. This specificity corresponds to the most intense phase of phospholipid biosynthesis activity during the parasite cycle, thus corroborating the mechanism of action. The in vivo antimalarial activity (ED50) against P. chabaudi was 0.03 mg/kg, and a similar sensitivity was obtained with P. vinckei petteri, when the drug was intraperitoneally administered in a 4 day suppressive test. In contrast, P. berghei was revealed as less sensitive (3- to 20-fold, depending on the P. berghei-strain). This difference in activity could result either from the degree of synchronism of every strain, their invasion preference for mature or immature red blood cells or from an intrinsically lower sensitivity of the P. berghei strain to G25. Irrespective of the mode of administration, G25 had the same therapeutic index (lethal dose 50 (LD50)/ED50) but the dose to obtain antimalarial activity after oral treatment was 100-fold higher than after intraperitoneal (or subcutaneous) administration. This must be related to the low intestinal absorption of these kind of compounds. G25 succeeded to completely inhibiting parasitemia as high as 11.2% without any decrease in its therapeutic index when administered subcutaneously twice a day for at least 8 consecutive days to P. chabaudi -infected-rodent model. Transition to human preclinical investigations now requires a synthesis of molecules which would permit oral absorption.

Analyse des cannabinoïdes par spectrométrie de masse en mode tandem = Analysis of cannabinoids by tandem mass spectrometry

Depuis quelques années, la spectrométrie de masse en tandem (MS/MS) ne cesse de gagner du terrain comme méthode d'analyse en toxicologie forensique, notamment pour le dosage des cannabinoïdes. Couplée à la chromatographie liquide (LC) ou gazeuse (GC), elle permet l'identification fiable et le dosage rapide du THC, de son précurseur acide, et de ses principaux métabolites, y compris les glucuronides. Au cours de ces dix dernières années, un nombre significatif de publications sont parues sur ce sujet. L'objectif de cet article est de passer en revue les analyses par spectrométrie de masse en tandem des cannabinoïdes dans diverses matrices biologiques. In recent years, tandem mass spectrometry (MS/MS) is gaining ground as a reference method of analysis in clinical and forensic toxicology, especially for the determination of cannabinoids. Coupled to liquid chromatography (LC) or gas chromatography (GC), it allows the definitive identification and rapid determination of THC, its acid precursor, and its major metabolites, including the glucuronides. During the past decade, several methods of analysis of cannabinoids in different matrices have appeared on this subject. The aim of this paper is to review the analysis of cannabinoids by tandem mass spectrometry methods in various biological matrices

A Kilkenny Post-primary School Survey: A Survey of Knowledge, Attitudes and Behaviour Relevant to Noncommunicable Disease

The Kilkenny post-primary school survey was carried out in the spring of 1987 on a stratified random sample of 445 post-primary school children in county Kilkenny. The study was designed as the basis for evaluation of the Kilkenny Health Project's school health education programme. The study examined knowledge, attitudes and behaviour relevant to non-communicable disease. The results showed that levels of adolescent alcohol and tobacco use were similar to those found in neighbouring countries. Smoking and drinking increased during adolescence and were more prevalent in males. Physical activity decreased throughout adolescence and a high intake of 'snack' foods was found. Health related knowledge levels were high but were not related to behaviour; however attitudes were found to be consistent with behaviour. These and other results are discussed. Literature relevant to school health education and the aetiology of non-communicable disease is described, with particular reference to Ireland. The evidence supporting health promotion intervention programmes against non-communicable disease is examined and WHO and Irish policies on health promotion outlined. The importance of health and disease prevention programmes commencing in youth is emphasised and the suitability and efficacy of school health education programmes are noted. A number of school health education programmes world-wide are described. The role of the community physician in relation to such programmes is discussed. Finally recommendations are made and areas for further research are made.This resource was contributed by The National Documentation Centre on Drug Use.

Decentralized model reference control of flexible cable-stayed beam structures

A decentralized model reference controller is designed to reduce the magnitude of the transversal vibration of a flexible cable-stayed beam structure induced by a seismic excitation. The controller design is made based on the principle of sliding mode such that a priori knowledge

Frequency and effects of meeting health behaviour guidelines among adolescents.

Background: To assess the relationship between overweight status and the concomitant adherence to physical activity, daily screen time and nutritional guidelines. Methods: Data were derived from the Swiss Health Behaviour in School-aged Children Survey 2006. Participants (n = 8130, 48.7% girls) were divided into two groups: normal weight (n = 7215, 44.8% girls) and overweight (n = 915, 34.8% girls), using self-reported height and weight. Groups were compared on adherence to physical activity, screen time and nutritional guidelines. Bivariate analyses were carried out followed by multivariate analyses using normal-weight individuals as the reference category. Results: Regardless of gender, overweight individuals reported more screen time, less physical activity and less concomitant adherence to guidelines. For boys, the multivariate analysis showed that any amount exceeding screen time recommendations was associated with increased odds of being overweight [>2-4 h: adjusted odds ratio (AOR) = 1.40; >4-6 h: AOR = 1.48; >6 h: AOR = 1.83]. A similar relation was found for any amount below physical activity recommendations (4-6 times a week: AOR = 1.67; 2-3 times a week: AOR = 1.87; once a week or less: AOR = 2.1). For girls, not meeting nutritional guidelines was less likely among overweight individuals (0-2 recommendations: AOR = 0.54). Regardless of weight status, more than half of the adolescents did not comply with any guideline and <2% met all three at the same time. Conclusions: Meeting current nutritional, physical activity and screen time guidelines should be encouraged with respect to overweight. However, as extremely low rates of concomitant adherence were found regardless of weight status, their achievability is questionable (especially for nutrition), which warrants further research to better adapt them to adolescents.

A variational approach for calculating Franck-Condon factors including mode-mode anharmonic coupling

We have implemented our new procedure for computing Franck-Condon factors utilizing vibrational configuration interaction based on a vibrational self-consistent field reference. Both Duschinsky rotations and anharmonic three-mode coupling are taken into account. Simulations of the first ionization band of Cl O2 and C4 H4 O (furan) using up to quadruple excitations in treating anharmonicity are reported and analyzed. A developer version of the MIDASCPP code was employed to obtain the required anharmonic vibrational integrals and transition frequencies

The dermatophyte species Arthroderma benhamiae: intraspecies variability and mating behaviour.

Arthroderma benhamiae is a zoophilic dermatophyte belonging to the Trichophyton mentagrophytes species complex. Here, a population of A. benhamiae wild strains from the same geographical area (Switzerland) was studied by comparing their morphology, assessing their molecular variability using internal transcribed spacer (ITS) and 28S rRNA gene sequencing, and evaluating their interfertility. Sequencing of the ITS region and of part of the 28S rRNA gene revealed the existence of two infraspecific groups with markedly different colony phenotypes: white (group I) and yellow (group II), respectively. For all strains, the results of mating type identification by PCR, using HMG (high-mobility group) and α-box genes in the mating type locus as targets, were in total accordance with the results of mating type identification by strain confrontation experiments. White-phenotype strains were of mating type + (mt+) or mating type - (mt-), whilst yellow-phenotype strains were all mt-. White and yellow strains were found to produce fertile cleistothecia after mating with A. benhamiae reference tester strains, which belonged to a third group intermediate between groups I and II. However, no interfertility was observed between yellow strains and white strains of mt+. A significant result was that white strains of mt- were able to mate and produce fertile cleistothecia with the white A. benhamiae strain CBS 112371 (mt+), the genome of which has recently been sequenced and annotated. This finding should offer new tools for investigating the biology and genetics of dermatophytes using wild-type strains.

Molecular analysis and mating behaviour of the Trichophyton mentagrophytes species complex.

Isolates of the Trichophyton mentagrophytes complex vary phenotypically. Whether the closely related zoophilic and anthropophilic anamorphs currently associated with Arthroderma vanbreuseghemii have to be considered as members of the same biological species remains an open question. In order to better delineate species in the T. mentagrophytes complex, we performed a mating analysis of freshly collected isolates from humans and animals with A. benhamiae and A. vanbreuseghemii reference strains, in comparison to internal transcribed spacer (ITS) and 28S rDNA sequencing. Mating experiments as well as ITS and 28S sequencing unambiguously allowed the distinction of A. benhamiae and A. vanbreuseghemii. We have also shown that all the isolates from tinea pedis and tinea unguium identified as T. interdigitale based on ITS sequences mated with A. vanbreuseghemii tester strains, but had lost their ability to give fertile cleistothecia. Therefore, T. interdigitale has to be considered as a humanized species derived from the sexual relative A. vanbreuseghemii.

Molecular phylogenetics of soricid shrews (Mammalia) based on mitochondrial cytochrome b gene sequences: with special reference to the Soricinae

Molecular phylogeny of soricid shrews (Soricidae, Eulipotyphla, Mammalia) based on 1140 bp mitochondrial cytochrome b gene (cytb) sequences was inferred by the maximum likelihood (ML) method. All 13 genera of extant Soricinae and two genera of Crocidurinae were included in the analyses. Anourosorex was phylogenetically distant from the main groupings within Soricinae and Crocidurinae in the ML tree. Thus, it could not be determined to which subfamily Anourosorex should be assigned: Soricinae, Crocidurinae or a new subfamily. Soricinae (excluding Anourosorex) should be divided into four tribes: Neomyini, Notiosoricini, Soricini and Blarinini. However, monophyly of Blarinini was not robust in the present data set. Also, branching orders among tribes of Soricinae and those among genera of Neomyini could not be determined because of insufficient phylogenetic information of the cytb sequences. For water shrews of Neomyini (Chimarrogale, Nectogale and Neomys), monophyly of Neomys and the Chimarrogale-Nectogale group could not be verified, which implies the possibility of multiple origins for the semi-aquatic mode of living among taxa within Neomyini. Episoriculus may contain several separate genera. Blarinella was included in Blarinini not Soricini, based on the cytb sequences, but the confidence level was rather low; hence more phylogenetic information is needed to determine its phylogenetic position. Furthermore, some specific problems of taxonomy of soricid shrews were clarified, for example phylogeny of local populations of Notiosorex crawfordi, Chimarrogale himalayica and Crocidura attenuata.

Performance of a chromatographic procedure used in the certification of reference material for polycyclic aromatic hydrocarbons in sewage sludge

Semi-automatic capillary gas chromatographic method with classical flame ionization detection, which satisfies the conditions for required performance and gave acceptable results within the framework of an interlaboratory certification programme for PAHs in sewage sludge, is described. The interesting feature of the procedure is that it incorporates automatic operations such as sample fractionation by semi-preparative HPLC, fraction collection at signal level recognition and evaporation under nitrogen flow. Multiple injections in the GC capillary column are performed in the on-column mode via an autosampler with temperature-programmable injector. Automatic data acquisition and chromatogram treatment are made via computer software. This partially automatic procedure releases personnel from tedious and time-consuming tasks and its robust character was validated through the certification of reference material for PAHs in sewage sludge, demonstrating its reliable performance.