The integrated approach of water hyacinth control on Lake Kainji: with special regard to the design, construction and installation of a water hyacinth barrier across the River Niger

This document lists the undesirable effects of water hyacinth (Eichhornia crassipes) on fisheries in Lake Kainji (Nigeria) and the integrated Water Hyacinth Control Programme in its ongoing fisheries management and development activities on the lake. Special regard is given to the design, construction and installation of a water hyacinth barrier across the River Niger. (PDF contains 44 pages)

Evaluación del impacto radiológico ambiental de una industria NORM

[ES]El proceso de soldadura más común es la soldadura por arco metálico con electrodos revestidos. A veces ese revestimiento contiene materiales radiactivos de origen natural (NORMs). En España los electrodos más utilizados son los recubiertos de rutilo mezclado con otros materiales. El rutilo contiene algunos radionúclidos naturales detectables, por lo que puede ser considerado como un NORM. Este trabajo principalmente se centra en la aplicación de la metodología expuesta en la Guía de Seguridad 11.3 del Consejo de Seguridad Nuclear (Metodología para la evaluación del impacto radiológico en las industrias NORM), como una herramienta para obtener las dosis en una fábrica que produce este tipo de electrodo y evaluar el impacto radiológico en una instalación específica. Para ello, se aplicaron en dicha instalación los pasos requeridos por la metodología para su cumplimiento. Se analizaron los beneficios inherentes al estudio y se identificaron las zonas de radiación más altas así como la posición de los trabajadores. Habiendo hecho uso de evaluaciones de dosis llevadas a cabo con anterioridad por otros procedimientos, métodos de simulación, se establecieron las pautas de protección radiológica a seguir para el cumplimiento de dicha guía, mediante la colocación de dosímetros personales y monitores de radiación.

Habitats regulations for stage 3 assessments radioactive substance authorisations

This is the Habitats regulations for stage 3 assessments: radioactive substances authorisations report from the Environment Agency, published on October 2003. The report focuses on the stage 3 assessments of radioactive substances authorisations in UK (to take place over the next five years, starting in 2003), which may have a potential impact on European designated Natura 2000 sites such Special Protection Areas (SPA), Special Areas of Conservation (SAC); and thus require further detailed assessment. This Environment Agency R&D project was commissioned to ERC, University o f Liverpool, in conjunction with Westlakes Scientific Consulting and the Centre for Ecology and Hydrology, as part o f the agency's preparation for the Stage 3 Assessments o f radioactive substances authorisations. The aim was to prepare site information sheets containing all data relevant for individual Natura 2000 sites needing Stage 3 Assessment and to stylise and represent species that require protection under the Habitats Regulations by the reference organism geometries listed in R&D Publication 128 (Copplestone et al., 2001).

Comparative feature on design, construction and installation of three different model of low cost solar tunnel dryers

The study was conducted in collaboration with the ECFC project of the FAO (BGD/97/017) in Cox's Bazar to develop a low cost solar tunnel dryer for the production of high quality marine dried fish. The study areas were Kutubdiapara, Maheshkhali and Shahparirdip under Cox's Bazar district. Three different models of low cost solar dryer were constructed with locally available materials such as bamboo, wood, bamboo mat, hemp, canvas, wire, nails, rope, tin, polythene and net. Size of the dryers were: 20x4x3 ft ; 30x3x3 ft and 65x3x3 ft with the costs of Tk. 3060, 3530, 9600 for dryer 1, 2 and 3, respectively having different models. The drying capacities were 50, 150, 500 kg for dryer 1, 2 and 3 respectively. The average temperature range inside the dryers were 29-43°C, 34-51°C and 37-57°C for dryer 1, 2 and 3 respectively as recorded at 8:30h to 16:30h. The relative humidity were in the ranges of 22-42%, 27-39% and 24-41 % in dryer 1, 2 and 3 respectively. The fish samples used were Bombay duck, Silver Jew fish and Ribbon fish. The total drying time was in the range of 30-42, 28-38 and 24-34 hours to reach the moisture content of 12.3-14.5, 11.8-14.3, and 11.6-14.1% in dryer 1, 2 and 3 respectively. Among these three fish samples the drying was faster in Silver Jew fish followed by Bombay duck and Ribbon fish in all the three dryer.

The effect of pile installation method on dynamic pile response

The widespread use of piled foundations in areas prone to liquefaction has led to significant research being carried out to understand their behaviour during earthquakes. A key challenge inmodelling this problemin a centrifuge is the installation procedure, and in most dynamic centrifuge experiments piles are installed before the test commences, either pushing the piles at 1g, or fixing the piles in the model and the sand poured around them. In this paper, a series of dynamic centrifuge experiments are described in which a 2 × 2 pile group is pushed into the model before the test begins and also once the centrifuge has reached the test acceleration. The paper focuses on the key differences which were observed in the pile group's response to the earthquake motion, and in particular, the very different settlement responses of the pile groups.

Fibre optic installation techniques for pile instrumentation

An innovative technique based on optical fibre sensing that allows continuous strain measurement has recently been introduced in structural health monitoring. Known as Brillouin Optical Time-Domain Reflectometry (BOTDR), this distributed optical fibre sensing technique allows measurement of strain along the full length (up to 10km) of a suitably installed optical fibre. Examples of recent implementations of BOTDR fibre optic sensing in piles are described in this paper. Two examples of distributed optical fibre sensing in piles are demonstrated using different installation techniques. In a load bearing pile, optical cables were attached along the reinforcing bars by equally spaced spot gluing to measure the axial response of pile to ground excavation induced heave and construction loading. Measurement of flexural behaviour of piles is demonstrated in the instrumentation of a secant piled wall where optical fibres were embedded in the concrete by simple endpoint clamping. Both methods have been verified via laboratory works. © 2009 IOS Press.

Gamma-ray spectroscopy at TRIUMF-ISAC

The 8π spectrometer at TRIUMF-ISAC consists of 20 Compton-suppressed germanium detectors and various auxiliary devices. The Ge array, once used for studies of nuclei at high angular momentum, has been transformed into the world's most powerful device dedicated to radioactive-decay studies. Many improvements in the spectrometer have been made, including a high-throughput data acquisition system, installation of a moving tape collector, incorporation of an array of 20 plastic scintillators for β-particle tagging, 5 Si(Li) detectors for conversion electrons, and 10 BaF2 detectors for fast-lifetime measurements. Experiments can be performed where data from all detectors are collected simultaneously, resulting in a very detailed view of the nucleus through radioactive decay. A number of experimental programmes have been launched that take advantage of the versatility of the spectrometer, and the intense beams available at TRIUMF-ISAC. © 2006 American Institute of Physics.