Radical Retropubic Prostatectomy for Localized Prostate Cancer in Renal Transplant Patients

OBJECTIVE To investigate the feasibility of radical retropubic prostatectomy (RRP) in renal transplant recipients with clinically localized prostate cancer. METHODS A prospective protocol was established between August 2004 and November 2007. In that period, 8 patients diagnosed with localized prostate cancer were submitted to RRP, and their clinicopathologic data were reviewed. RESULTS The mean age (standard deviation) at surgery was 59.6 +/- 6.7 years (range, 49-67 years). All patients had TIC tumors, except for 1 with a T2A tumor. The mean preoperative prostate-specific antigen value was 4.5 +/- 1.8 ng/mL (range, 1.6-7.0 ng/mL). The mean interval between renal transplantation and RRP was 89.9 +/- 65.1 months (range, 40-209 months). The procedure was well tolerated without major complications, and all patients were discharged on the fifth postoperative day. There was no impairment to bladder descent caused by the presence of the allograft or the ureteroneocystostomy. Urethrovesical anastomosis was easily performed in all cases in the standard manner. Blood transfusion was needed in 2 patients (1 received 2 U and another 5 U of blood). The mean operative duration was 183 +/- 29.7minutes (range, 150-240 minutes), the mean estimated blood loss was 656 +/- 576 mL (range, 100-2000 mL), and no deterioration of graft function was observed. All patients were followed, and the mean follow-up was 10.5 months (range, 2-30 months). Prostate-specific antigen was undetectable in all cases during this time frame. CONCLUSIONS Radical retropubic prostatectomy in renal transplant patients is safe, effective, and can be easily performed in the same manner as described by Walsh, regardless of the presence of the allograft. The only necessary technical modification is the avoidance of ipsilateral lymphadenectomy to prevent damage to the transplanted organ. UROLOGY 72: 1362-1365, 2008. (C) 2008 Elsevier Inc.

The development of a rat model of erectile dysfunction after radical prostatectomy: preliminary findings

To develop a rat model of erectile dysfunction (ED) after cavernous nerve injury. Given the great similarity between the anatomical structure of the cavernous nerve in rats and humans, 24 rats underwent dissections and the cavernous nerves were identified with the aid of an operating microscope. Then the rats were randomized into two groups: sham-operated controls and a bilateral cavernous nerve section group. At 3 months after surgery, the rats were evaluated for their response to an apomorphine challenge. The erectile response after an apomorphine challenge was normal in all the control rats, while there were no erections in the bilateral injured group. The rat major autonomic ganglion and its cavernous nerve can be identified with the aid of a microscope. Rats are inexpensive and easy to handle, thus a good animal for developing an ED model of cavernous nerve injury. In the present study, the rats with cavernous nerve injury lost erectile capacity in a reliable and reproducible fashion. Because of the great similarity between the cavernous nerve of rats and humans, one may consider this technique as a reliable experimental model for studying ED after radical prostatectomy.

Pentafecta: A New Concept for Reporting Outcomes of Robot-Assisted Laparoscopic Radical Prostatectomy

Background: Widespread use of prostate-specific antigen screening has resulted in younger and healthier men being diagnosed with prostate cancer. Their demands and expectations of surgical intervention are much higher and cannot be adequately addressed with the classic trifecta outcome measures. Objective: A new and more comprehensive method for reporting outcomes after radical prostatectomy, the pentafecta, is proposed. Design, setting, and participants: From January 2008 through September 2009, details of 1111 consecutive patients who underwent robot-assisted radical prostatectomy performed by a single surgeon were retrospectively analyzed. Of 626 potent men, 332 who underwent bilateral nerve sparing and who had 1 yr of follow-up were included in the study group. Measurements: In addition to the traditional trifecta outcomes, two perioperative variables were included in the pentafecta: no postoperative complications and negative surgical margins. Patients who attained the trifecta and concurrently the two additional outcomes were considered as having achieved the pentafecta. A logistic regression model was created to evaluate independent factors for achieving the pentafecta. Results and limitations: Continence, potency, biochemical recurrence-free survival, and trifecta rates at 12 mo were 96.4%, 89.8%, 96.4%, and 83.1%, respectively. With regard to the perioperative outcomes, 93.4% had no postoperative complication and 90.7% had negative surgical margins. The pentafecta rate at 12 mo was 70.8%. On multivariable analysis, patient age (p = 0.001) was confirmed as the only factor independently associated with the pentafecta. Conclusions: A more comprehensive approach for reporting prostate surgery outcomes, the pentafecta, is being proposed. We believe that pentafecta outcomes more accurately represent patients` expectations after minimally invasive surgery for prostate cancer. This approach may be beneficial and may be used when counseling patients with clinically localized disease. (C) 2011 European Association of Urology. Published by Elsevier B. V. All rights reserved.

A general hazard model for lifetime data in the presence of cure rate

Historically, the cure rate model has been used for modeling time-to-event data within which a significant proportion of patients are assumed to be cured of illnesses, including breast cancer, non-Hodgkin lymphoma, leukemia, prostate cancer, melanoma, and head and neck cancer. Perhaps the most popular type of cure rate model is the mixture model introduced by Berkson and Gage [1]. In this model, it is assumed that a certain proportion of the patients are cured, in the sense that they do not present the event of interest during a long period of time and can found to be immune to the cause of failure under study. In this paper, we propose a general hazard model which accommodates comprehensive families of cure rate models as particular cases, including the model proposed by Berkson and Gage. The maximum-likelihood-estimation procedure is discussed. A simulation study analyzes the coverage probabilities of the asymptotic confidence intervals for the parameters. A real data set on children exposed to HIV by vertical transmission illustrates the methodology.

The radical homopolymerization of N-phenylmaleimide, N-n-hexylmaleimide and N-cyclohexylmaleimide in tetrahydrofuran

The kinetics and mechanisms of thermally initiated (using 2,2'-azobisisoburyronitrile (AIBN) as initiator) radical homopolymerizations of a series of maleimides, including N-phenymaleimide (PHMI) [l-phenyl-1H-pyrrole-2,5-dione]; N-n-hexylmaleimide (nHMI) [l-(n-hexyI)-1H-pyrrole-2,5-dione]; and N-cyclohexylmaIeimide (CHMI) [l-cyclohexyl- 1H-pyrrole-2,5-dione] have been investigated in THF solution by an on-line FT-NIR technique. It was found that the order of the activation energies for the three N-sub-MIs is: E-a PHMI < E-a (PHMI) < E-a (CHMI). The overall polymerization rate parameter k and the pre-exponential factor A were calculated. The kinetic order with respect to the N-sub-MIs was in the range of 0.71 < m < 0.75 for the initiator and n = 1.0 for the monomer. Radical transfer to solvent was found to be the key factor in determining the apparent order with respect to the initiator. All of the homopolymers had a relatively low molecular weight. The end groups of the polymer chains were characterized by MALDI-TOF, GPC and NMR methods and the results clearly indicate that the polymerization was initiated by THF radicals, and that the termination reaction is mainly controlled by chain transfer to solvent through an hydrogen abstraction mechanism. (C) 2001 Elsevier Science Ltd. All rights reserved.

Free radical copolymerization of methyl methacrylate and allyl acetate Part 2 structure and properties

The structure of the product from the free radical bulk copolymerization of methyl methacrylate (MMA) and allyl acetate (AAc) was investigated. The mole fraction of AAc plays an important role in the copolymerization of these two monomers. Molecular weight (MW) and molecular weight distribution (MWD) are completely altered when the feed composition is dominantly AAc. NMR spectroscopy confirmed the incorporation of AAc into the polymer. However, no allyl-allyl linkages were observed at low conversions. T-g was found to be affected by the incorporation of AAc into the polymer. (C) 2001 Society of Chemical Industry.

A systematic study of the microwave and thermal cure kinetics of the TGDDM/DDS and TGDDM/DDM epoxy-amine resin systems

The microwave and thermal cure processes for the epoxy-amine systems N,N,N',N'-tetraglycidyl-4,4'-diaminodiphenyl methane (TGDDM) with diaminodiphenyl sulfone (DDS) and diaminodiphenyl methane (DDM) have been investigated. The DDS system was studied at a single cure temperature of 433 K and a single stoichiometry of 27 wt% and the DDM system was studied at two stoichiometries, 19 and 32 wt%, and a range temperatures between 373 and 413 K. The best values the kinetic rate parameters for the consumption of amines have been determined by a least squares curve Ft to a model for epoxy-amine cure. The activation energies for the rate parameters for the MY721/DDM system were determined as was the overall activation energy for the cure reaction which was found to be 62 kJ mol(-1). No evidence was found for any specific effect of the microwave radiation on the rate parameters, and the systems were both found to be characterized by a negative substitution effect. Copyright (C) 2001 John Wiley & Sons, Ltd.

Free-radical bulk polymerization of styrene: ESR and near-infrared spectroscopic study of the entire conversion range

The free radical polymerization of styrene in bulk was monitored by ESR and FT near-infrared spectroscopy at 70°C for a series of concentrations of the initiator, dimethyl 2,2′-azobis(isobutyrate). In order to obtain detailed kinetic information over the intire conversion range, and the gel effect range in particular, conversion and free radical concentration data points were accumulated with exceptionally short time intervals. The polystyrene radical concentration ([St•]) went through a sharp maximum at the gel effect, a feature that has hitherto escaped observation due to the rapid concentration changes in the gel effect range relative to the data point time intervals of previous studies. Temperature measurements throughout the polymerization were employed to calculate that a temperature increase was not the cause of the [St•] maximum, which thus appeares to be a genuine feature of the gel effect of this system under isothermal conditions. The propagation rate constant (kp) as a function of monomer conversion exhibited a marked dependence on initiator concentration at high monomer conversion; the sharp decrease in kp with increasing conversion was shifted to higher conversions with increasing initiator concentration.

Can anticonvulsant drug therapy 'cure' epilepsy?

There is now evidence to show that, as time passes, epilepsy, even if untreated, tends to undergo spontaneous remission in a significant proportion of patients. The question therefore arises as to whether anticonvulsant drug therapy increases this chance of the patient with epilepsy ultimately entering a terminal remission which continues after the treatment is withdrawn, Le. whether anticonvulsant drug therapy itself may sometimes cure epilepsy. There are no well-designed studies available in the literature that provide a clear answer to this question. However, data from a number of investigations carried out for other purposes can be used to see whether contemporary anticonvulsant drug therapy is associated with higher rates of expected untreated terminal remission than those that apply for never-treated patients with epilepsy, or for those whose anticonvulsant treatment has probably been inadequate for various social or historical reasons. Despite the admitted uncertainties inherent in drawing conclusions from such material, there appears to be a reasonably consistent tendency for contemporary anticonvulsant drug treatment to be associated with a greater chance of achieving probable cure of epilepsy. Therefore it would appear premature to take the view that contemporary anticonvulsant drug therapy does no more than suppress epileptic seizures until epilepsy remits spontaneously, or fails to remit, with the passing of time.

Clopidogrel: A CURE in acute coronary syndromes? (A Key Paper Evaluation)

The standard approach to preventing acute coronary syndromes (ACSs)has been to inhibit platelet aggregation with aspirin and to inhibit blood coagulation with low molecular-weight heparin (LMWH). Even with this combination there is still a substantial short and long-term cardiovascular risk. The Clopidogrel in Unstable angina to prevent Recurrent Events (CURE) trial [1] compared clopidogrel plus aspirin against aspirin alone in patients with ACSs. The clopidogrel regimen was a loading dose of 300 mg p.o. followed by 75 mg/day and the recommended dose of aspirin was 75 - 325 mg/day. The first primary outcome was a composite of death from cardiovascular causes, non-fatal myocardial infarction (MI) or stroke and this occurred significantly less often in the clopidogrel than the placebo group (9.3 vs. 11.4%). Although there were more clopidogrel patients with life-threatening bleeding (clopidogrel 2.2%, placebo 1.8%), this represented GI haemorrhages and bleeding at sites of arterial puncture rather than fatal bleeding. This trial suggests a role for clopidogrel in the long-term treatment of ACSs

A systematic study of the microwave and thermal cure kinetics of the DGEBA/DDS and DGEBA/DDM epoxy-amine resin systems

The microwave and thermal cure processes for the epoxy-amine systems (epoxy resin diglycidyl ether of bisphenol A, DGEBA) with 4,4'-diaminodiphenyl sulphone (DDS) and 4,4'-diaminodiphenyl methane (DDM) have been investigated for 1:1 stoichiometries by using fiber-optic FT-NIR spectroscopy. The DGEBA used was in the form of Ciba-Geigy GY260 resin. The DDM system was studied at a single cure temperature of 373 K and a single stoichiometry of 20.94 wt% and the DDS system was studied at a stoichiometry of 24.9 wt% and a range of temperatures between 393 and 443 K. The best values of the kinetic rate parameters for the consumption of amines have been determined by a least squares curve fit to a model for epoxy/amine cure. The activation energies for the polymerization of the DGEBA/DDS system were determined for both cure processes and found to be 66 and 69 kJ mol(-1) for the microwave and thermal cure processes, respectively. No evidence was found for any specific effect of the microwave radiation on the rate parameters, and the systems were both found to be characterized by a negative substitution effect. Copyright (C) 2002 John Wiley Sons, Ltd.