Reconfigurable photonic logic architecture

The amorphous silicon photo-sensor studied in this thesis, is a double pin structure (p(a-SiC:H)-i’(a-SiC:H)-n(a-SiC:H)-p(a-SiC:H)-i(a-Si:H)-n(a-Si:H)) sandwiched between two transparent contacts deposited over transparent glass thus with the possibility of illumination on both sides, responding to wave-lengths from the ultra-violet, visible to the near infrared range. The frontal il-lumination surface, glass side, is used for light signal inputs. Both surfaces are used for optical bias, which changes the dynamic characteristics of the photo-sensor resulting in different outputs for the same input. Experimental studies were made with the photo-sensor to evaluate its applicability in multiplexing and demultiplexing several data communication channels. The digital light sig-nal was defined to implement simple logical operations like the NOT, AND, OR, and complex like the XOR, MAJ, full-adder and memory effect. A pro-grammable pattern emission system was built and also those for the validation and recovery of the obtained signals. This photo-sensor has applications in op-tical communications with several wavelengths, as a wavelength detector and to execute directly logical operations over digital light input signals.

The quantified-Self and wearable technologies in the workplace: implications and challenges for their implementations

Introduction of technologies in the workplace have led to a dramatic change. These changes have come with an increased capacity to gather data about one’s working performance (i.e. productivity), as well as the capacity to track one’s personal responses (i.e. emotional, physiological, etc.) to this changing workplace environment. This movement of self-monitoring or self-sensing using diverse types of wearable sensors combined with the use of computing has been identified as the Quantified-Self. Miniaturization of sensors, reduction in cost and a non-stop increase in the computer power capacity has led to a panacea of wearables and sensors to track and analyze all types of information. Utilized in the personal sphere to track information, a looming question remains, should employers use the information from the Quantified-Self to track their employees’ performance or well-being in the workplace and will this benefit employees? The aim of the present work is to layout the implications and challenges associated with the use of Quantified-Self information in the workplace. The Quantified-Self movement has enabled people to understand their personal life better by tracking multiple information and signals; such an approach could allow companies to gather knowledge on what drives productivity for their business and/or well-being of their employees. A discussion about the implications of this approach will cover 1) Monitoring health and well-being, 2) Oversight and safety, and 3) Mentoring and training. Challenges will address the question of 1) Privacy and Acceptability, 2) Scalability and 3) Creativity. Even though many questions remain regarding their use in the workplace, wearable technologies and Quantified-Self data in the workplace represent an exciting opportunity for the industry and health and safety practitioners who will be using them.

Logic programming and artificial neural networks in breast cancer detection

About 90% of breast cancers do not cause or are capable of producing death if detected at an early stage and treated properly. Indeed, it is still not known a specific cause for the illness. It may be not only a beginning, but also a set of associations that will determine the onset of the disease. Undeniably, there are some factors that seem to be associated with the boosted risk of the malady. Pondering the present study, different breast cancer risk assessment models where considered. It is our intention to develop a hybrid decision support system under a formal framework based on Logic Programming for knowledge representation and reasoning, complemented with an approach to computing centered on Artificial Neural Networks, to evaluate the risk of developing breast cancer and the respective Degree-of-Confidence that one has on such a happening.

Evaluation of the determinism of the actuator sensor interface (ASI) on programmable logic controllers (PLC), personal computers (PC) and real-time operating systems (RTOS)

The purpose of this study was to evaluate the determinism of the AS-lnterface network and the 3 main families of control systems, which may use it, namely PLC, PC and RTOS. During the course of this study the PROFIBUS and Ethernet field level networks were also considered in order to ensure that they would not introduce unacceptable latencies into the overall control system. This research demonstrated that an incorrectly configured Ethernet network introduces unacceptable variable duration latencies into the control system, thus care must be exercised if the determinism of a control system is not to be compromised. This study introduces a new concept of using statistics and process capability metrics in the form of CPk values, to specify how suitable a control system is for a given control task. The PLC systems, which were tested, demonstrated extremely deterministic responses, but when a large number of iterations were introduced in the user program, the mean control system latency was much too great for an AS-I network. Thus the PLC was found to be unsuitable for an AS-I network if a large, complex user program Is required. The PC systems, which were tested were non-deterministic and had latencies of variable duration. These latencies became extremely exaggerated when a graphing ActiveX was included in the control application. These PC systems also exhibited a non-normal frequency distribution of control system latencies, and as such are unsuitable for implementation with an AS-I network. The RTOS system, which was tested, overcame the problems identified with the PLC systems and produced an extremely deterministic response, even when a large number of iterations were introduced in the user program. The RTOS system, which was tested, is capable of providing a suitable deterministic control system response, even when an extremely large, complex user program is required.

Regulación del proceso de secado de embutidos crudos-curados mediante la aplicación de lógica borrosa (fuzzy logic)

El presente proyecto tenía como objetivo final el desarrollo de un sistema de control basado en Lógica Fuzzy que permita que el proceso de secado tenga una regulación continua y con una menor dependencia de la experiencia del personal experto, evitando además la formación de encostrado. Asimismo, se plantearon una serie de objetivos parciales, cuya consecución permitiría, además de alcanzar el objetivo final descrito, obtener un conocimiento científico adicional. Por ello, a continuación se resumen los resultados en relación con los objetivos parciales propuestos. Como paso previo, antes de abordar los objetivos planteados se diseñó y construyó un equipo experimental de secado, donde se controló de forma precisa la temperatura, la humedad relativa y la velocidad del aire.

Salvation goods and Canonization Logic : On two Popular Cults of Southern Italy

(Summary of the production) The idea that religion has to succeed in a «market», selling «salvation goods», has proved to be extremely attractive to scholars in sociology and the study of religion. Max Weber used the term «salvation good» to compare different religious traditions. Pierre Bourdieu employed the term in order to analyze «religious economy». And recently, an American group of researchers advocating «rational choice of religion» put the theme at the forefront of current debates. This book - the fruit of an International Congress in Lausanne in April 2005 - brings together leading specialists in the fields of sociology and the study of religion who discuss the terms «salvation goods» (or religious goods) and «religious market». The authors test the applicability of these concepts by using specific examples and they either deliberately advocate or criticize Weberian, Bourdieusian or rational-choice perspectives.

A Classification of Tools for Learning Logic

A table showing a comparison and classification of tools (intelligent tutoring systems) for e-learning of Logic at a college level.

Quantified set inversion with applications to control

This paper describes a new reliable method, based on modal interval analysis (MIA) and set inversion (SI) techniques, for the characterization of solution sets defined by quantified constraints satisfaction problems (QCSP) over continuous domains. The presented methodology, called quantified set inversion (QSI), can be used over a wide range of engineering problems involving uncertain nonlinear models. Finally, an application on parameter identification is presented

The Decision on Turkish EU accession in December 2002: The logic of anarchy, collective action problems and rhetorical action

Studies of the EU accession of the East and Central European Countries have stressed the importance of neo-liberal institutionalism as an explanation for Member State preferences. In this paper it is argued that Member States’ preferences over Turkish EU accession are better explained by power politics and neo-realism. It seems therefore that Turkey’s way to the EU follows another path than the East and Central Countries. Turkish accession raises the question of the EU’s role in a uni-polar world order – whether the EU should develop into an independent actor on the world stage or not. However, when it comes to the interaction among the Member States in order to decide on when to open accession negotiations with Turkey the constitutive values of the EU seriously modify the outcome that pure power politics would have let to.