Construction of effective disposable biosensors for point of care testing of nitrite

© 2015. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/

Electrochemical Immunosensing of Cortisol in an Automated Microfluidic System Towards Point-of-Care Applications

This dissertation describes the development of a label-free, electrochemical immunosensing platform integrated into a low-cost microfluidic system for the sensitive, selective and accurate detection of cortisol, a steroid hormone co-related with many physiological disorders. Abnormal levels of cortisol is indicative of conditions such as Cushing’s syndrome, Addison’s disease, adrenal insufficiencies and more recently post-traumatic stress disorder (PTSD). Electrochemical detection of immuno-complex formation is utilized for the sensitive detection of Cortisol using Anti-Cortisol antibodies immobilized on sensing electrodes. Electrochemical detection techniques such as cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) have been utilized for the characterization and sensing of the label-free detection of Cortisol. The utilization of nanomaterial’s as the immobilizing matrix for Anti-cortisol antibodies that leads to improved sensor response has been explored. A hybrid nano-composite of Polyanaline-Ag/AgO film has been fabricated onto Au substrate using electrophoretic deposition for the preparation of electrochemical immunosening of cortisol. Using a conventional 3-electrode electrochemical cell, a linear sensing range of 1pM to 1µM at a sensitivity of 66µA/M and detection limit of 0.64pg/mL has been demonstrated for detection of cortisol. Alternately, a self-assembled monolayer (SAM) of dithiobis(succinimidylpropionte) (DTSP) has been fabricated for the modification of sensing electrode to immobilize with Anti-Cortisol antibodies. To increase the sensitivity at lower detection limit and to develop a point-of-care sensing platform, the DTSP-SAM has been fabricated on micromachined interdigitated microelectrodes (µIDE). Detection of cortisol is demonstrated at a sensitivity of 20.7µA/M and detection limit of 10pg/mL for a linear sensing range of 10pM to 200nM using the µIDE’s. A simple, low-cost microfluidic system is designed using low-temperature co-fired ceramics (LTCC) technology for the integration of the electrochemical cortisol immunosensor and automation of the immunoassay. For the first time, the non-specific adsorption of analyte on LTCC has been characterized for microfluidic applications. The design, fabrication technique and fluidic characterization of the immunoassay are presented. The DTSP-SAM based electrochemical immunosensor on µIDE is integrated into the LTCC microfluidic system and cortisol detection is achieved in the microfluidic system in a fully automated assay. The fully automated microfluidic immunosensor hold great promise for accurate, sensitive detection of cortisol in point-of-care applications.

Linearity analysis and comparison study on the epoc® point-of-care blood analysis system in cardiopulmonary bypass patients

The epoc® blood analysis system (Epocal Inc., Ottawa, Ontario, Canada) is a newly developed in vitro diagnostic hand-held analyzer for testing whole blood samples at point-of-care, which provides blood gas, electrolytes, ionized calcium, glucose, lactate, and hematocrit/calculated hemoglobin rapidly. The analytical performance of the epoc® system was evaluated in a tertiary hospital, see related research article “Analytical evaluation of the epoc® point-of-care blood analysis system in cardiopulmonary bypass patients” [1]. Data presented are the linearity analysis for 9 parameters and the comparison study in 40 cardiopulmonary bypass patients on 3 epoc® meters, Instrumentation Laboratory GEM4000, Abbott iSTAT, Nova CCX, and Roche Accu-Chek Inform II and Performa glucose meters.

Predictive value of Glasgow Coma Scale after brain trauma: change in trend over the past ten years.

BACKGROUND: Age and the Glasgow Coma Scale (GCS) score on admission are considered important predictors of outcome after traumatic brain injury. We investigated the predictive value of the GCS in a large group of patients whose computerised multimodal bedside monitoring data had been collected over the previous 10 years. METHODS: Data from 358 subjects with head injury, collected between 1992 and 2001, were analysed retrospectively. Patients were grouped according to year of admission. Glasgow Outcome Scores (GOS) were determined at six months. Spearman's correlation coefficients between GCS and GOS scores were calculated for each year. RESULTS: On average 34 (SD: 7) patients were monitored every year. We found a significant correlation between the GCS and GOS for the first five years (overall 1992-1996: r = 0.41; p<0.00001; n = 183) and consistent lack of correlations from 1997 onwards (overall 1997-2001: r = 0.091; p = 0.226; n = 175). In contrast, correlations between age and GOS were in both time periods significant and similar (r = -0.24 v r = -0.24; p<0.002). CONCLUSIONS: The admission GCS lost its predictive value for outcome in this group of patients from 1997 onwards. The predictive value of the GCS should be carefully reconsidered when building prognostic models incorporating multimodality monitoring after head injury.

Managing the Sick Child in the Era of Declining Malaria Transmission: Development of ALMANACH, an Electronic Algorithm for Appropriate Use of Antimicrobials.

OBJECTIVE: To review the available knowledge on epidemiology and diagnoses of acute infections in children aged 2 to 59 months in primary care setting and develop an electronic algorithm for the Integrated Management of Childhood Illness to reach optimal clinical outcome and rational use of medicines. METHODS: A structured literature review in Medline, Embase and the Cochrane Database of Systematic Review (CDRS) looked for available estimations of diseases prevalence in outpatients aged 2-59 months, and for available evidence on i) accuracy of clinical predictors, and ii) performance of point-of-care tests for targeted diseases. A new algorithm for the management of childhood illness (ALMANACH) was designed based on evidence retrieved and results of a study on etiologies of fever in Tanzanian children outpatients. FINDINGS: The major changes in ALMANACH compared to IMCI (2008 version) are the following: i) assessment of 10 danger signs, ii) classification of non-severe children into febrile and non-febrile illness, the latter receiving no antibiotics, iii) classification of pneumonia based on a respiratory rate threshold of 50 assessed twice for febrile children 12-59 months; iv) malaria rapid diagnostic test performed for all febrile children. In the absence of identified source of fever at the end of the assessment, v) urine dipstick performed for febrile children <2 years to consider urinary tract infection, vi) classification of 'possible typhoid' for febrile children >2 years with abdominal tenderness; and lastly vii) classification of 'likely viral infection' in case of negative results. CONCLUSION: This smartphone-run algorithm based on new evidence and two point-of-care tests should improve the quality of care of <5 year children and lead to more rational use of antimicrobials.

GuideView: structured multi-modal delivery of clinical guidelines.

GuideView is a system designed for structured, multi-modal delivery of clinical guidelines. Clinical instructions are presented simultaneously in voice, text, pictures or video or animations. Users navigate using mouse-clicks and voice commands. An evaluation study performed at a medical simulation laboratory found that voice and video instructions were rated highly.

The impact of selected factors in nurses' attitudes toward bedside computers

The purpose of this study was to determine the impact of selected factors on nurses' attitudes toward bedside computers. Bedside computer systems, also referred to as point-of-care systems, are clinical information systems that allow documentation of patient care and retrieval of data at the patient's bedside, or in close proximity to where care is delivered. The adoption of bedside computer systems appears to be increasing among U.S. institutions. As healthcare institutions undertake automation projects, they face many challenges associated with implementing large-scale change. ^ The study explored four factors and their relationship to nurses' attitudes toward bedside computers. A pre-bedside implementation survey of 184 staff nurses did not demonstrate a relationship between previous computer experience and nurses' attitudes toward bedside computers (p > .05). The data did not indicate a relationship between nurses' formal education and their attitude toward bedside computers (p > .05). The data did support a relationship between nurses' previous computer experience and their comfort in the use of bedside computers (p < .0005). Using a quasi-experimental control group design, attitudes of nurses were studied over an 18 month period. The Pre versus Post Survey data indicated that nurses who used bedside computers, the experimental group, had more positive attitudes than the nurses who did not use bedside computers, the control group (p < .0005). ^ The findings are significant to institutions implementing bedside computers, to the human resource development staff overseeing bedside computer training, and to the practice of clinical nursing. ^

Medicines reconciliation at the point of hospital discharge for children

Objectives: Hospital discharge is a transition of care, where medication discrepancies are likely to occur and potentially cause patient harm. The purpose of our study was to assess the prescribing accuracy of hospital discharge medication orders at a London, UK teaching hospital. The timeliness of the discharge summary reaching the general practitioner (GP, family physician) was also assessed based on the 72 h target referenced in the Care Quality Commission report.1 Method: 501 consecutive discharge medication orders from 142 patients were examined and the following records were compared (1) the final inpatient drug chart at the point of discharge, (2) printed signed copy of the initial to take away (TTA) discharge summary produced electronically by the physician, (3) the pharmacist's amendments on the initial TTA that were hand written, (4) the final electronic patient discharge summary record, (5) the patients final take home medication from the hospital. Discrepancies between the physician's order (6) and pharmacist's change(s) (7) were compared with two types of failures – ‘failure to make a required change’ and ‘change where none was required’. Once the patient was discharged, the patient's GP, was contacted 72 h after discharge to see if the patient discharge summary, sent by post or via email, was received. Results: Over half the patients seen (73 out of 142) patients had at least one discrepancy that was made on the initial TTA by the doctor and amended by the pharmacist. Out of the 501 drugs, there were 140 discrepancies, 108 were ‘failures to make a required change’ (77%) and 32 were ‘changes where none were required’ (23%). The types of ‘failures to make required changes’ discrepancies that were found between the initial TTA and pharmacist's amendments were paracetamol and ibuprofen changes (dose banding) 38 (27%), directions of use 34 (24%), incorrect formulation of medication 28 (20%) and incorrect strength 8 (6%). The types of ‘changes where none were required discrepancies’ were omitted medication 15 (11%), unnecessary drug 14 (10%) and incorrect medicine including spelling mistakes 3 (2%). After contacting the GPs of the discharged patients 72 h postdischarge; 49% had received the discharge summary and 45% had not, the remaining 6% were patients who were discharged without a GP. Conclusion: This study shows that doctor prescribing at discharge is often not accurate, and interventions made by pharmacist to reconcile are important at this point of care. It was also found that half the discharge summaries had not reached the patient's family physician (according to the GP) within 72 h.

High-performance flexible hybrid field-effect transistors based on cellulose fiber paper

IEEE Electron Device Letters, VOL. 29, NO. 9,

Evaluation de la sarcopénie de la personne agée par la bio-impédance spectroscopique [Multispectral bioimpedance and sarcopenia in the elderly].

The definition of sarcopenia includes both a loss of muscle strength and a decline in functional quality in addition to the loss of muscle protein mass. Multispectral bioimpendance allows bedside assessment of muscle mass. Using this new tool, we performed a pilot study to look for a possible correlation between muscle mass and various tests of muscle strength (grip strength, key-pitch, tip-pinch) and with functional tests (walk speed on 10 meters and Tinetti test). Our study demonstrates a good correlation between muscle mass determined by spectroscopic bioimpendance and muscle strength assessment, but no correlation with functional tests.

Tests diagnostiques rapides (TDR): la panacée pour le praticien [Rapid diagnostic tests (RDT): the cure-all for the practitioner?].

Many rapid diagnostic tests (RDT) for the diagnosis of infectious diseases have been developed over the last 20 years. These allow (1) administering a treatment immediately in case of a potentially fatal disease, (2) prescribing a specific rather than presumptive treatment, (3) quickly introducing measures aimed at interrupting the transmission of the disease, (4) avoiding useless antibiotic treatments and (5) implementing a sequential diagnostic strategy to avoid extensive investigations. Using the example of malaria, a new strategy that includes a RDT as first-line emergency diagnostic tool and, when negative, delayed microscopy at the laboratory opening time is implemented in Lausanne since 1999. This strategy has been shown to be safe. Each TDR has its own characteristics that imperatively need to be known by the practitioner if he/she wants to use it in a rational way.

Identificação do risco de deterioração fisiológica no pré-hospitalar

Enquadramento – A Early Warning Scores é uma escala de alerta, baseada num sistema de atribuição de pontos (scores) aos parâmetros vitais e deterioração do SNC, sendo a sua principal finalidade a identificação precoce do risco de deterioração fisiológica do doente. Objetivos – Determinar os parâmetros da escala que foram avaliados; identificar a periodicidade de avaliação dos parâmetros da escala; determinar as situações identificadas como risco de deterioração fisiológica; avaliar as propriedades psicométricas da escala Early Warning Scores (validade e fiabilidade). Material e Método – Estudo quantitativo e descritivo-correlacional, cuja população alvo consistiu nos doentes vítimas de acidente ou doença súbita, submetidos a atendimentos por parte de enfermeiros afetos ao INEM, nomeadamente nas ambulâncias de Suporte Imediato de Vida, mediante ativação via 112. O instrumento de avaliação utilizado consiste na Escala Early Warning Scores. Resultados – Verificou-se que o índice de fiabilidade se traduziu num valor de alfa de Cronbach, para a globalidade da escala, fraco (α=0.462). Concluiu-se que houve uma redução progressiva dos scores, em termos de risco, indicando a ocorrência de uma deteção precoce da degradação clínica dos 214 doentes, o que se traduziu numa atuação mais eficaz no pré-hospitalar. Conclusão - A redução progressiva dos scores, em termos de risco ao longo dos três momentos de avaliação com a Early Warning Scores, sugere que houve uma deteção precoce da degradação clínica dos doentes, resultando numa atuação mais eficaz no pré-hospitalar. Palavras-chave: Pré-hospitalar; Risco de deterioração fisiológica; Early Warning Scores.

Caracterización de Sistemas intensivos en Software desde un punto de vista de innovación=Characterizing Software-intensive Systems from the innovation point of view

La innovación en Sistemas Intesivos en Software está alcanzando relevancia por múltiples razones: el software está presente en sectores como automóvil, teléfonos móviles o salud. Las empresas necesitan conocer aquellos factores que afectan a la innovación para incrementar las probabilidades de éxito en el desarrollo de sus productos y, la evaluación de productos sofware es un mecanismo potente para capturar este conocimiento. En consecuencia, las empresas necesitan evaluar sus productos desde la perpectiva de innovación para reducir la distancia entre los productos desarrollados y el mercado. Esto es incluso más relevante en el caso de los productos intensivos en software, donde el tiempo real, la oportunidad, complejidad, interoperabilidad, capacidad de respuesta y compartción de recursos son características críticas de los nuevos sistemas. La evaluación de la innovación de productos ya ha sido estudiada y se han definido algunos esquemas de evaluación pero no son específicos para Sistemas intensivos en Sofwtare; además, no se ha alcanzado consenso en los factores ni el procedimiento de evaluación. Por lo tanto, tiene sentido trabajar en la definición de un marco de evaluación de innovación enfocado a Sistemas intesivos en Software. Esta tesis identifica los elementos necesarios para construir in marco para la evaluación de de Sistemas intensivos en Software desde el punto de vista de la innovación. Se han identificado dos componentes como partes del marco de evaluación: un modelo de referencia y una herramienta adaptativa y personalizable para la realización de la evaluación y posicionamiento de la innovación. El modelo de referencia está compuesto por cuatro elementos principales que caracterizan la evaluación de innovación de productos: los conceptos, modelos de innovación, cuestionarios de evaluación y la evaluación de productos. El modelo de referencia aporta las bases para definir instancias de los modelos de evaluación de innovación de productos que pueden se evaluados y posicionados en la herramienta a través de cuestionarios y que de forma automatizada aporta los resultados de la evaluación y el posicionamiento respecto a la innovación de producto. El modelo de referencia ha sido rigurosamente construido aplicando modelado conceptual e integración de vistas junto con la aplicación de métodos cualitativos de investigación. La herramienta ha sido utilizada para evaluar productos como Skype a través de la instanciación del modelo de referencia. ABSTRACT Innovation in Software intensive Systems is becoming relevant for several reasons: software is present embedded in many sectors like automotive, robotics, mobile phones or heath care. Firms need to have knowledge about factors affecting the innovation to increase the probability of success in their product development and the assessment of innovation in software products is a powerful mechanism to capture this knowledge. Therefore, companies need to assess products from an innovation perspective to reduce the gap between their developed products and the market. This is even more relevant in the case of SiSs, where real time, timeliness, complexity, interoperability, reactivity, and resource sharing are critical features of a new system. Many authors have analysed product innovation assessment and some schemas have been developed but they are not specific to SiSs; in addition, there is no consensus about the factors or the procedures for performing an assessment. Therefore, it has sense to work in the definition of a customized software product innovation evaluation framework. This thesis identifies the elements needed to build a framework to assess software products from the innovation perspective. Two components have been identified as part of the framework to assess Software intensive Systems from the innovation perspective: a reference-model and an adaptive and customizable tool to perform the assessment and to position product innovation. The reference-model is composed by four main elements characterizing product innovation assessment: concepts, innovation models, assessment questionnaires and product assessment. The reference model provides the umbrella to define instances of product innovation assessment models that can be assessed and positioned through questionnaires in the proposed tool that also provides automation in the assessment and positioning of innovation. The reference-model has been rigorously built by applying conceptual modelling and view integration integrated with qualitative research methods. The tool has been used to assess products like Skype through models instantiated from the reference-model.