Synthesis of Cu@ZnO Core−Shell Nanocomposite through Digestive Ripening of Cu and Zn Nanoparticles

The synthesis of colloids of copper and zinc nanoparticles by solvated metal atom dispersion (SMAD) is described. The as-prepared colloids with a large size distribution of the particles are transformed into colloidal nanoparticles of a narrow size distribution by the digestive ripening process which involves refluxing the colloid at or near the boiling point of the solvent in the presence of a passivating ligand. The copper nanoparticles of 2.1 ± 0.3 nm and zinc nanoparticles of 3.9 ± 0.3 nm diameters have thus been obtained. Digestive ripening of the as-prepared copper and zinc colloids together in the presence of a passivating agent gave Cu@ZnO core−shell nanoparticles, with an average diameter of 3.0 ± 0.7 nm. Particles synthesized in this manner were characterized by UV−visible spectroscopy, high-resolution electron microscopy, energy-filtered electron microscopy, and powder X-ray diffraction methods which confirm the core−shell structure.

Carotenoids In 3 Stages Of Ripening Of Mango

The distribution of carotenoids, both qualitative and quantitative, during 3 stages of ripening of mango has been studied using chromatographic, spectroscopic and chemical methods. There was an increase in content as well as in number of carotenoids during ripening. The present study showed there were 15, 14 and 17 different carotenoids in the unripe, partially ripe and fully ripe mangoes, respectively. Even though phytofluene (39.26%) was the major carotenoid in the partially ripe mango, β-carotene constituted the major carotenoid in the unripe (37.47%) and fully ripe mango (50.64%). cis-β-Carotene was present only in the fully ripe mango. Only the unripe mango contained ζ-carotene, whereas γ-carotene was present in all the 3 stages of ripening. The major xanthophyll present in the unripe mango was mutatoxanthin (9.44%), whereas auroxanthin constituted the major hydroxylated carotenoid of the partially ripe (5.07%) and fully ripe (10.40%) mangoes. The percent of cryptoxanthin dropped to lower levels during ripening. As ripening proceeded, lutein completely is appeared. There were significant quantities of eaxanthin in the partially ripe and fully ripe mango. Epoxy carotenoids such as 5,6-monoepoxy-β-carotene, mutatochrome, cis-violaxanthin, luteoxanthin, mutatoxanthin and auroxanthin were observed in all 3 stages of ripening.

When should fig fruit produce volatiles? Pattern in a ripening process

Ripe fruit need to signal their presence to attract dispersal agents. Plants may employ visual and/or olfactory sensory channels to signal the presence of ripe fruit. Visual signals of ripe fruit have been extensively investigated. However, the volatile signatures of ripe fruit that use olfactorily-oriented dispersers have been scarcely investigated. Moreover, as in flowers, where floral scents are produced at times when pollinators are active (diurnal versus nocturnal), whether plants can modulate the olfactory signal to produce fruit odours when dispersers are active in the diel cycle is completely unknown. We investigated day night differences in fruit odours in two species of figs, Ficus racemosa and Ficus benghalensis. The volatile bouquet of fruit of F.racemosa that are largely dispersed by bats and other mammals was dominated by fatty acid derivatives such as esters. In this species in which the ripe fig phase is very short, and where the figs drop off soon after ripening, there were no differences between day and night in fruit volatile signature. The volatile bouquet of fruit of F. benghalensis that has a long ripening period, however, and that remain attached to the tree for extended periods when ripe, showed an increase in fatty acid derivatives such as esters and of benzenoids such as benzaldehyde at night when they are dispersed by bats, and an elevation of sesquiterpenes during the day when they are dispersed by birds. For the first time we provide data that suggest that the volatile signal produced by fruit can show did l differences based on the activity period of the dispersal agent. (C) 2011 Elsevier Masson SAS. All rights reserved.

Colloidal calcium nanoparticles: digestive ripening in the presence of a capping agent and coalescence of particles under an electron beam

The nanochemistry of calcium remains unexplored, which is largely due to the inaccessibility of calcium nanoparticles in an easy to handle form by conventional methods of synthesis as well as its highly reactive and pyrophoric nature. The synthesis of colloidal Ca nanoparticles by the solvated metal atom dispersion (SMAD) method is described. The as-prepared Ca-THF nanoparticles, which are polydisperse, undergo digestive ripening in the presence of a capping agent, hexadecyl amine (HDA) to afford highly monodisperse colloids consisting of 2-3 nm sized Ca-HDA nanoparticles. These are quite stable towards precipitation for long periods of time, thereby providing access to the study of the nanochemistry of Ca. Particles synthesized in this manner were characterized by UV-visible spectroscopy, high resolution electron microscopy, and powder X-ray diffraction methods. Under an electron beam, two adjacent Ca nanoparticles undergo coalescence to form a larger particle.

Digestive ripening: a synthetic method par excellence for core-shell, alloy, and composite nanostructured materials

The solvated metal atom dispersion (SMAD) method has been used for the synthesis of colloids of metal nanoparticles. It is a top-down approach involving condensation of metal atoms in low temperature solvent matrices in a SMAD reactor maintained at 77 K. Warming of the matrix results in a slurry of metal atoms that interact with one another to form particles that grow in size. The organic solvent solvates the particles and acts as a weak capping agent to halt/slow down the growth process to a certain extent. This as-prepared colloid consists of metal nanoparticles that are quite polydisperse. In a process termed as digestive ripening, addition of a capping agent to the as-prepared colloid which is polydisperse renders it highly monodisperse either under ambient or thermal conditions. In this, as yet not well-understood process, smaller particles grow and the larger ones diminish in size until the system attains uniformity in size and a dynamic equilibrium is established. Using the SMAD method in combination with digestive ripening process, highly monodisperse metal, core-shell, alloy, and composite nanoparticles have been synthesized. This article is a review of our contributions together with some literature reports on this methodology to realize various nanostructured materials.

From (Au5Sn + AuSn) physical mixture to phase pure AuSn and Au5Sn intermetallic nanocrystals with tailored morphology: digestive ripening assisted approach

Here we present digestive ripening facilitated interatomic diffusion for the phase controlled synthesis of homogeneous intermetallic nanocrystals of Au-Sn system. Au and Sn metal nanoparticles synthesized by a solvated metal atom dispersion (SMAD) method are employed as precursors for the fabrication of AuSn and Au5Sn which are Au-rich Au-Sn intermetallic nanocrystals. By optimizing the stoichiometry of Au and Sn in the reaction mixture, and by employing growth directing agents, the formation of phase pure intermetallic AuSn and Au5Sn nanocrystals could be realized. The as-prepared Au and Sn colloidal nanoparticles and the resulting intermetallic nanocrystals are thoroughly characterized by powder X-ray diffraction, transmission electron microscopy (TEM and STEM-EDS), and optical spectroscopy. The results obtained here demonstrate the potential of solution chemistry which allows synthesizing phase pure Au-Sn intermetallics with tailored morphology.

Digestive ripening facilitated atomic diffusion at nanosize regime: Case of AuIn2 and Ag3In intermetallic nanoparticles

Monodisperse colloidal gold-indium (AuIn2) intermetallic nanoparticles have been synthesized from Au and In colloids using the digestive ripening process. Formation of the intermetallic proceeds via digestive ripening facilitated atomic diffusion of Au and In atoms from the Au and In nanoparticles followed simultaneously by their growth in the solution. Optimization of the reaction temperature was found to be crucial for the formation of AuIn2 intermetallic from gold and indium nanoparticles. Transmission electron microscopy revealed the presence of nearly monodisperse nanoparticles of Au and AuIn2 with particle size distribution of 3.7 +/- 1.0 nm and 5.0 +/- 1.6 nm, respectively. UV-visible spectral studies brought out the absence of SPR band in pure AuIn2 intermetallic nanoparticles. Optical study and electron microscopy, in combination with powder X-ray diffraction established phase pure AuIn2 intermetallic nanoparticles unambiguously. The potential of such an unprecedented approach has been further exploited in the synthesis of Ag3In intermetallic nanoparticles with the dimension of less than 10 nm. (C) 2014 Elsevier B.V. All rights reserved.

Size Modulation of Colloidal Au Nanoparticles via Digestive Ripening in Conjunction with a Solvated Metal Atom Dispersion Method: An Insight Into Mechanism

Digestive ripening, a postsynthetic treatment of colloidal nanoparticles, is a versatile method to produce monodisperse nanoparticles and to prepare various bimetallic nanostructures. The mechanism of this process is largely unknown. Herein, we present a systematic study conducted using Au nanoparticles prepared by a solvated metal atom dispersion method to probe the mechanistic aspects of digestive ripening. In our study, experimental conditions such as concentration of capping agent, reaction time, and temperature, were found to influence the course of the digestive ripening process. Here it is shown that, during digestive ripening under reflux, nanoparticles within an optimum size window are conserved, and surface etching facilitated mass transfer resulted in monodisperse nanoparticles. Overall, digestive ripening can be considered as a kinetically controlled thermodynamic process.

Digestive ripening and green synthesis of ultra-small (r < 2 nm) stable ZnO quantum dots

Given the recent reports pertaining to novel optical properties of ultra-small quantum dots (QDs) (r <2 nm), this nanomaterial is of relevance to both technology and science. However it is well known that in these size regimes most chalocogenide QD dispersions are unstable. Since applications often require use of QD dispersions (e.g. for deployment on a substrate), stabilizing these ultra-small particles is of practical relevance. In this work we demonstrate a facile, green, solution approach for synthesis of stable, ultra-small ZnO QDs having radius less than 2 nm. The particle size is calculated using Brits' equation and confirmed by transmission electron micrographs. ZnO QDs reported remain stable for > 120 days in ethanol (at similar to 298-303 K). We report digestive ripening (DR) in TEA capped ZnO QDs; this occurs rapidly over a short duration of 5 min. To explain this observation we propose a suitable mechanism based on the Lee's theory, which correlates the tendency of DR with the observed zeta potentials of the dispersed medium. To the best of our knowledge this is the (i) first report on DR in oxide QDs, as well as the first direct experimental verification of Lee's theory, and (ii) most rapid DR reported so far. The facile nature of the method presented here makes ultra-small ZnO readily accessible for fundamental exploration and technologically relevant applications. (C) 2014 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

Diagnostico del estado de aplicacion y manual de recomendaciones buenas practicas agricolas en cinco unidades de produccion de papaya (Carica papaya L.) del departamento de Rivas, Nicaragua

Durante el período comprendido entre el 01 y el 30 de noviembre de 2005 se realizó un diagnóstico del estado de aplicación de las Buenas Prácticas Agrícolas (BPAs) en cinco unidades de producción de papaya ( Carica papaya). Las fincas evaluadas en este trabajo fueron: San Cayetano, San José, Belmont, paso de piedra y gracias a Dios, todas ubicadas en el departamento de Rivas. La valoración de las fincas se hizo en base al listado de comprobación que emplea oficialmente el MAGFOR para tales fines. Los resultados indican que ninguna de las cinco fincas alcanzó el porcentaje mínimo de cumplimiento (80%) de los requisitos establecidos para declarar que una finca está aplicando BPAs. Las fincas de mayor puntaje fueron finca San Cayetano con un puntaje de 77 (20%), finca Belmont con un puntaje 79 (21%) respectivamente. La finca con menor puntaje fue la finca Paso de piedra con un puntaje de 56 (15%).El puntaje promedio de las tres fincas es de 70.6 puntos para un grado de cumplimiento promedio de 18.6%. En Base al diagnóstico se elaboró un manual de recomendaciones de BPAs para ser aplicado en el cultivo de papaya bajo el contexto de las fincas evaluadas

Evaluación del crecimiento, rendimiento y rentabilidad en papaya (Carica papaya L.) utilizando tres dosis de vermicompost, Managua, 2009-2010

El estudio se realizó en la Universidad Nacional Agraria (UNA), en el kilómetro 12 ½ Carretera norte, Managua. El objetivo de este ensayo fue evaluar crecimiento, rendimiento y rentabilidad en papaya (Carica papaya L.), usando tres dosis de vermicompost 10, 15 y 20 t(ha año) -1 aplicados con una frecuencia de cada dos meses, en el periodo verano - invierno 2009 - 2010. El área experimental tuvo dimensiones de 30m de largo por 24m de ancho, equivalente aun área total de 720 m2 estableciéndose 180 plantas distribuidas en 15 surcos con 12 plantas cada surco. Las variables de estudio tomadas en consideración fueron sometidas a la prueba Kruskal Wallis al 95% de confianza: a) Variables de crecimiento; obtuvo mejores resultados el tratamiento v 20 evaluando así: diámetro superior del tallo con 6.29 cm; diámetro inferior del tallo con 13.71 cm; longitud del tallo con 353.59 cm; altura de inserción de primera flor con 81.56 cm; altura de inserción de primer fruto con 116.49cm; número de hojas vivas con 18.68; número de hojas muertas con 67.18 y número de hojas con 23.17. b) Variables de rendimiento: número de frutos cosechados, obteniendo mejores resultados el tratamiento v 20 con 55 500 papayas (ha-1 ciclo); peso de frutos cosechados, logrando mayor rendimiento el tratamiento v 10 con 34750 kg ha-1; eje mayor de papaya con el tratamiento v 20 con 27.27cm y eje menor de papaya manifestándose mejor tratamiento v 10 con 12.20cm. c) Variable de rentabilidad económica; usando la metodología CIMMYT 1998 se analizaron los datos económicos y reveló que es de mayor rentabilidad el tratamiento v 10 con C$ 20.15. El análisis económico del presupuesto parcial reflejó que los costos que varían y el beneficio neto en el tratamiento a1 presentó un monto de C$ 38 443.2 ha-1 y C$ 774706.8 ha-1 respectivamente.

Evaluación agronómica con enfoque agroecológico en un sistema diversificado de guayaba (Psidium guajava L.), nopal (Opuntia ficus L.), piña (Ananas comosus L.) y papaya (carica papaya L.) utilizando vermicompost, Managua, Nicaragua, 2009-2011

Con el propósito de responder a preguntas de orden nutricional y biológico del suelo con un enfoque agroecológico se desarrolló el presente trabajo, en un terreno calcáreo, no salino, que permaneció en barbecho cinco años antes de iniciado el estudio. Se evaluó la implementación de una diversificación de cultivos (guayaba, nopal, piña y papaya) y tres dosis de vermicompost (a 1 :10, a 2 :15 y a 3 :20 t (ha año) - 1 . La investigación se inició en mayo del 2009 hasta diciembre del 2011 y el diseño usado fue cuasiexperimental en franjas pareadas. Las características físicas - químicas de suelo analizadas fueron: pH en H 2 O, materia orgánica , N, arena, limo y arcilla en %; P disponible, Fe, Cu, Mn y Zn en ppm; K disponible, Ca y Mg en meq, conductividad eléctrica en μS/cm y la relación C/N. Desde el punto de vista biológico del suelo se determinaron presencia de hongos, bacterias y actinomicetos. Antes de iniciar el estudio en 2009, y durante el ensayo, se determinaron las variables físicas, químicas y biológicas del suelo. Para la interpretación agronómica de la nutrición para cada cultivo se hizo un análisis combinado entre los resultados de las propiedades físico - químicas y los rangos definidos para cada cultivo por la metodología propuesta por Quintana (1983) . La diversificación de cultivos, influyó sobre las propiedades físicas, químicas y biológicas del suelo. En el cultivo de guayaba si se aplica 20 t (ha año) - 1 hay que realizar aplicaciones suplementarias de Cu. Aplicaciones de a 1 y a 2 en nopal y papaya respectivamente, además de aplicaciones complementarias de Cu, también necesitan suplemento de P. Sin efecto antropogénico los microorganismos que predominaron fueron bacterias del género Bacillus y esporádicamente Pseudomona y Sarcina . Con la diversificación de cultivos y aplicaciones de vermicompost se incrementó la diversidad de géneros de microorganismos. El total de géneros de microorganismos, al concluir el estudio fueron 13; de éstos 10 fueron diferentes (Cinco hongos: Curvularia, A spergillus, Pestalotia, Fusarium, Penicillium ; cuatro bacterias: Serratia, Erwinia, Sporolactobacillus y Caryophanon y un actinomiceto: Streptomyces). Variables del crecimiento en el cultivo de guayaba demostraron que con un mayor número de ramas terciarias existe un 70 % de probabilidad de tener más frutos comerciales. En nopal, el tratamiento con los mejores resultados para variables del crecimiento es 15 t (ha año) - 1 cosechado cada 90 días. Para piña, se encontró resultados superiores con 10 t (ha año) - 1 . Papaya obtuvo los mejores resultados con 20 t (ha año) - 1 . Con el cultivo de guayaba el mejor rendimiento se alcanzó utilizando 20 t (ha año) - 1 . En nopal un mayor número de cladodios se alcanza aplicando 15 t (ha año) - 1 cosechado cada 30 días. Un mayor peso en el cladodio se obtiene al aplicar 20 t (ha año) - 1 , cosechado cada 90 días. La piña obtiene mayor número de frutos aplicando 15 t (ha año) - 1 . En el cultivo de papaya un mayor número de frutos cosechados fue alcanzado con 15 - 20 t (ha año) - 1.

Influencia de diferentes densidades y del control de malezas sobre el comportamiento de la cenosis y el crecimiento y rendimiento de la Papaya (Carica papaya)

El experimento se realizó en la Hacienda las Mercedes en Managua km 11 de la carretera norte. La siembra se hisos en época de postrera en septiembre de 1988 con el cultivo de papaya (carica papaya L.) Variedad criolla Rivense, con el objetivo de determinar la influencia de diferentes densidades de siembra y métodos de control de malezas sobre la cenosis de las malezas y el crecimiento, desarrollo y producción de la papaya. Se utilizó en diseño de parcelas en franjas con 12 repeticiones, estudiando 4 densidades de siembra y 4 métodos de control de malezas. Las mayores abundancias, cobertura y biomasa de las malezas fueron alcanzadas en las densidades bajas sobre todo la densidad 2x2x4m y en el control mecánico. Por el contrario los resultado9s más bajos de abundancia cobertura y biomasa de las malezas fueron alcanzados en la densidad alta 1.5x1.5m y por el control con Cyperus rotundus dominando siempre Ixophurus unisetus.. Las mayores alturas de plantas y diámetros de tallo fueron alcanzados en la densidad 1.5x1.5m y el control con papayat. Igual sucede con el peso diámetro y longitud de primer fruto, número y peso total de frutos por planta en los cuales la densidad 1.5x.1.5m y el control con paraguat dieron los mejores resultados.