Grains size and components distribution in turbidite layesr of ODP Leg 101

Textural and compositional differences were found between gravity-flow sheets in an open-ocean environment on the northern slope of Little Bahama Bank (Site 628, Pliocene turbidite sequence) and in a closed-basin depositional setting (Site 632, Quaternary turbidite sequence). Mud-supported debris-flow sheets were cored at Site 628. Average mean grain size of the turbidite samples was lower, mud content was higher, and sorting was poorer than in comparable samples from Site 632. This reflects the deposition of proximal, low-energy turbidity currents and debris flows on a base-ofslope carbonate apron. No mud-supported debris-flow sheets were deposited in the investigated sediment sequence of Hole 632A. Many larger turbidity currents from around the margins of Exuma Sound may have reached this central basin setting, depositing sediments that had been transported over longer distances. Planktonic components dominate in the grain-sized fraction (500-1000 µm) of turbidite samples from Hole 628A, while platform detritus is rare. We interpreted this as resulting from the erosion and reworking of a large area of open-ocean slope sediments by gravity flows. In contrast, large amounts of benthic and platform components were found in the turbidite samples of Hole 632A. This may be explained by the fact that the slopes of the enclosed Exuma Sound are steep, and turbidity currents bypassed much of these slopes through pronounced channels, delivering more shallow-water detritus to the deep basin. Erosion of slope sediments, a possible source area of planktonic detritus, is assumed to be low. The small slope area in relation to the larger surrounding platform areas and lower production of planktonic components in the enclosed waters of Exuma Sound may also explain the observed low number of planktonic components at Hole 632A. Turbidite material from both open-ocean and enclosed-basin environments was deposited at Site 635.

Estudio cinemático del cuerpo humano mediante Kinect

La cámara Kinect está desarrollada por Prime Sense en colaboración con Microsoft para la consola XBox, ofrece imágenes de profundidad gracias a un sensor infrarrojo. Este dispositivo también incluye una cámara RGB que ofrece imágenes a color además de una serie de micrófonos colocados de tal manera que son capaces de saber de qué ángulo proviene el sonido. En un principio Kinect se creó para el ocio doméstico pero su bajo precio (en comparación con otras cámaras de iguales características) y la aceptación por parte de desarrolladores han explotado sus posibilidades. El objetivo de este proyecto es, partiendo de estos datos, la obtención de variables cinemáticas tales como posición, velocidad y aceleración de determinados puntos de control del cuerpo de un individuo como pueden ser el cabeza, cuello, hombros, codos, muñecas, caderas, rodillas y tobillos a partir de los cuales poder extraer patrones de movimiento. Para ello se necesita un middleware mediante el entorno de libre distribución (GNU) multiplataforma. Como IDE se ha utilizado Processing, un entorno open source creado para proyectos de diseño. Además se ha utilizado el contenedor SimpleOpenNI, desarrollado por estudiantes e investigadores que trabajan con Kinect. Esto ofrece la posibilidad de prescindir del SDK de Microsoft, el cual es propietario y obliga a utilizar su sistema operativo, Windows. Usando estas herramientas se consigue una solución viable para varios sistemas operativos. Se han utilizado métodos y facilidades que ofrece el lenguaje orientado a objetos Java (Proccesing hereda de este), y se ha planteado una solución basada en un modelo cliente servidor que dota de escalabilidad al proyecto. El resultado del proyecto es útil en aplicaciones para poblaciones con riesgo de exclusión (como es el espectro autista), en telediagnóstico, y en general entornos donde se necesite estudiar hábitos y comportamientos a partir del movimiento humano. Con este proyecto se busca tener una continuidad mediante otras aplicaciones que analicen los datos ofrecidos. ABSTRACT. The Kinect camera is developed by PrimeSense in collaboration with Microsoft for the xBox console provides depth images thanks to an infrared sensor. This device also includes an RGB camera that provides color images in addition to a number of microphones placed such that they are able to know what angle the sound comes. Kinect initially created for domestic leisure but its low prices (compared to other cameras with the same characteristics) and acceptance by developers have exploited its possibilities. The objective of this project is based on this data to obtain kinematic variables such as position, velocity and acceleration of certain control points of the body of an individual from which to extract movement patterns. These points can be the head, neck, shoulders, elbows, wrists, hips, knees and ankles. This requires a middleware using freely distributed environment (GNU) platform. Processing has been used as a development environment, and open source environment created for design projects. Besides the container SimpleOpenNi has been used, it developed by students and researchers working with Kinect. This offers the possibility to dispense with the Microsoft SDK which owns and agrees to use its operating system, Windows. Using these tools will get a viable solution for multiple operating systems. We used methods and facilities of the Java object-oriented language (Processing inherits from this) and has proposed a solution based on a client-server model which provides scalability to the project. The result of the project is useful in applications to populations at risk of exclusion (such as autistic spectrum), in remote diagnostic, and in general environments that need study habits and behaviors from human motion. This project aims to have continuity using other applications to analyze the data provided.

Virtualization of event sources in wireless sensor networks for the Internet of Things

Wireless Sensor Networks (WSNs) are generally used to collect information from the environment. The gathered data are delivered mainly to sinks or gateways that become the endpoints where applications can retrieve and process such data. However, applications would also expect from a WSN an event-driven operational model, so that they can be notified whenever occur some specific environmental changes instead of continuously analyzing the data provided periodically. In either operational model, WSNs represent a collection of interconnected objects, as outlined by the Internet of Things. Additionally, in order to fulfill the Internet of Things principles, Wireless Sensor Networks must have a virtual representation that allows indirect access to their resources, a model that should also include the virtualization of event sources in a WSN. Thus, in this paper a model for a virtual representation of event sources in a WSN is proposed. They are modeled as internet resources that are accessible by any internet application, following an Internet of Things approach. The model has been tested in a real implementation where a WSN has been deployed in an open neighborhood environment. Different event sources have been identified in the proposed scenario, and they have been represented following the proposed model.

Evolving a core Banking enterprise architecture: leveraging business events exploitation

Business information has become a critical asset for companies and it has even more value when obtained and exploited in real time. This paper analyses how to integrate this information into an existing banking Enterprise Architecture, following an event-driven approach, and entails the study of three main issues: the definition of business events, the specification of a reference architecture, which identifies the specific integration points, and the description of a governance approach to manage the new elements. All the proposed solutions have been validated with a proof-of-concept test bed in an open source environment. It is based on a case study of the banking sector that allows an operational validation to be carried out, as well as ensuring compliance with non-functional requirements. We have focused these requirements on performance.

Age determination of Antarctic marine sediments

We present the first circum-East Antarctic chronology for the Holocene, based on 17 radiocarbon dates generated by the accelerator method. Marine sediments from around East Antarctica contain a consistent, high-resolution record of terrigenous (ice-proximal) and biogenic (open-marine) sedimentation during Holocene time. This record demonstrates that biogenic sedimentation beneath the open-marine environment on the continental shelf has been restricted to approximately the past 4 ka, whereas a period of terrigenous sedimentation related to grounding line advance of ice tongues and ice shelves took place between 7 and 4 ka. An earlier period of open-marine (biogenic sedimentation) conditions following the late Pleistocene glacial maximum is recognized from the Prydz Bay (Ocean Drilling Program) record between 10.7 and 7.3 ka. Clearly, the response of outlet systems along the periphery of the East Antarctic ice sheet during the mid-Holocene was expansion. This may have been a direct consequence of climate warming during an Antarctic 'Hypsithermal'. Temperature-accumulation relations for the Antarctic indicate that warming will cause a significant increase in accumulation rather than in ablation. Models that predict a positive mass balance (growth) of the Antarctic ice sheet under global warming are supported by the mid-Holocene data presented herein.

Ultrasound Mapping of Nerve Stimulator Response during Sciatic Nerve Blockade and Relation to Postoperative Pain Scores

1.1 Background and Purpose: Ultrasound guided sciatic nerve blockade has rapid onset but at 24 hours pain is greater than nerve stimulator techniques. Injection of the nerve branches or trunk and sub-sheath blockade increase success and reduce onset times but risk injury. This study mapped needle coordinates for sciatic nerve blockade with nerve stimulation and its relation to postoperative pain scores. 1.2 Method: Angle and distance of the needle tip and infusion catheter from the popliteal sciatic nerve at which stimulated plantar flexion occurred were measured. Pain scores at postanesthesia unit discharge and 24 hours were recorded. 1.3 Results: 81% of opioid naïve patients reported immediate analgesia and 20.8% at 24 hours. In opioid tolerant patients 56.8% reported immediate analgesia and 9.1% at 24 hours. Plantar flexion was observed with the needle in the posterior medial quadrant near the sciatic nerve. Opioid tolerant patients reported adequate analgesia when the needle was located more medially and proximally to the sciatic nerve. 1.4 Conclusion: Stimulated plantar flexion is isolated to a narrow angular range in the posterior medial quadrant adjacent to the sciatic nerve. Opioid tolerant patients report adequate analgesia if the needle and catheter are more medial and proximal to the nerve surface.

Differences in analgesia in opioid naïve and tolerant patients with sciatic nerve blockade following elective foot and ankle surgery

1.1 Introduction and Purpose: Adequate postoperative analgesia in the opioid tolerant with chronic non-malignant pain is challenging. Multimodal pain relief regimens include regional anesthesia but opioid tolerant patients report increased postoperative pain and opioid consumption. This study compared analgesia in opioid naïve and tolerant patients receiving postoperative sciatic nerve blockade for foot and ankle surgery. 1.2 Method: Preoperative pain scores, trauma, maintenance and intraoperative opioid doses and following postoperative sciatic nerve blockade, patient self-reported pain scores and opioid consumption at discharge from the post-anesthesia unit and 24 hours were recorded. 1.3 Results: 191 patients enrolled. 40.3% were opioid tolerant and 33% had lower extremity trauma. Preoperative, immediate and delayed postoperative pain scores and intraoperative, immediate and 24 hour postoperative consumption of opioids were increased in opioid tolerant patients. Trauma and continuous infusion in opioid naïve and tolerant groups did not result in differences in 24 hour opioid consumption. 1.4 Limitations: Small subgroups and use of the pain score limited the accuracy of results. 1.5 Conclusion: Opioid tolerant patients require greater analgesic doses following sciatic nerve blockade for foot and ankle surgery. 24 hour opioid consumption for opioid naïve and tolerant patients is neither influenced by lower extremity injury nor continuous infusion.

Prolonged Duration of Sciatic Nerve Blockade in the Elderly after Foot and Ankle Surgery

1.1 Background and Objectives: Perioperative morbidity related to anesthesia renders elderly patients vulnerable because age related factors affect medication effects, clearance and metabolism. Regional anesthesia within a multimodal regimen reduces opioid adverse effects in the elderly and improves immediate analgesia but not long term recovery and prolonged nerve blockade has been reported. The purpose of this study was to assess analgesic effects of sciatic nerve blockade in the elderly. 1.2 Methods: Postoperative sciatic nerve blockade was administered for foot and ankle surgery to patients over age 18 years. Preoperative, post-anesthesia unit and 24 hour postoperative pain scores and opioid doses for these same intervals were recorded. 1.3 Results: 47 patients enrolled and 12 (25.5%) were over age 70. Preoperative, immediate and 24 post-operative pain scores and total intraoperative and immediate postoperative opioid doses were lower in the elderly. The total 24 hour postoperative opioid doses in the elderly were lower compared to the younger group. 1.4 Conclusions: Total 24 hour postoperative cumulative opioid doses after sciatic nerve blockade in patients over 70 are lower than in younger patients. Further observations in greater numbers of patients and improved ultrasound to assess sciatic nerve structure in the elderly are warranted to study this effect.

People management issues in Indian KPOs

Purpose: The business process outsourcing (BPO) industry in India is evolving rapidly, and one of the key characteristics of this industry is the emergence of high-end services offered by knowledge processing outsourcing (KPO) organizations. These organizations are set to grow at a tremendous pace. Given the people-intensive nature of this industry, efficient employee management is bound to play a critical role. The literature lacks studies offering insights into the HR challenges involved and the ways in which they are addressed by KPOs. The purpose of this paper is to attempt to fill this gap by presenting findings from an in-depth case study of a KPO organization. Design/methodology/ approach: To achieve the research objective we adopted an in-depth case study approach. The research setting was that of a KPO organization in India, which specialises in offering complex analytics, accounting and support services to the real estate and financial services industries. Findings: The results of this study highlight the differences in the nature of work characteristics in such organizations as compared to call centres. The study also highlights some of the key people management challenges that these organizations face like attracting and retaining talent. The case company adopts formal, structured, transparent and innovative human resource practices. The study also highlights that such enlightened human resource practices stand on the foundations laid by an open work environment and facilitative leadership. Research limitations/implications: One of the key limitations is that the analysis is based on primary data from a single case study and only 18 interviews. The analysis contributes to the fields of KPO, HRM and India and has key messages for policy makers. Originality/value: The literature on outsourcing has in general focused on call centres established in the developed world. However, the booming BPO industry in India is also beginning to offer high-end services, which are far above the typical call centres. These KPOs and their people management challenges are relatively unexplored territories in the literature. By conducting this study in an emerging market (India) and focusing on people-related challenges in KPOs, this study attempts to provide a fresh perspective to the extant BPO literature. © Emerald Group Publishing Limited.

CULTIVATING THE O-SHAPED ENGINEER

With roots in the realm of construction, products and the physical world, it is not surprising that design and engineering education is grounded within the paradigm of consumerism and growth, perpetuating an unsustainable system. With a primary sustainability focus on material improvements, students are rarely asked to question the context into which their designs will fit, or to explore how their designs can promote a different (more sustainable) future rather than just a less unsustainable one. While we remain within this economic paradigm, even the T-shaped designer, with a broad general knowledge and deep expertise in one specific area, at best has potential to reduce negative environmental impact rather than to create positive social and environmental benefit. As such, the T-shaped engineer is allowed little opportunity to creatively explore more sustainable alternatives using systems-level thinking. This paper explores how we can prepare the next generation of designers and engineers to maximise their inherent skills to address the most intractable global issues, currently considered outside of their traditional remit. It questions the notion of the T-shaped designer, and proposes instead the O-shaped designer whose primary concern is circular systems, worldviews, synergies and relationships. The paper examines some of the tools used in depth, explaining some unexpected but essential components. Through two case studies it will show how their application is generating sustainable innovation and delivering new O-Shaped calibre of design engineers, ready to rebuild the future.

RoMEO Studies 8: self-archiving: the logic behind the colour-coding used in the Copyright Knowledge Bank

Purpose – The purpose of this research is to show how the self-archiving of journal papers is a major step towards providing open access to research. However, copyright transfer agreements (CTAs) that are signed by an author prior to publication often indicate whether, and in what form, self-archiving is allowed. The SHERPA/RoMEO database enables easy access to publishers' policies in this area and uses a colour-coding scheme to classify publishers according to their self-archiving status. The database is currently being redeveloped and renamed the Copyright Knowledge Bank. However, it will still assign a colour to individual publishers indicating whether pre-prints can be self-archived (yellow), post-prints can be self-archived (blue), both pre-print and post-print can be archived (green) or neither (white). The nature of CTAs means that these decisions are rarely as straightforward as they may seem, and this paper describes the thinking and considerations that were used in assigning these colours in the light of the underlying principles and definitions of open access. Approach – Detailed analysis of a large number of CTAs led to the development of controlled vocabulary of terms which was carefully analysed to determine how these terms equate to the definition and “spirit” of open access. Findings – The paper reports on how conditions outlined by publishers in their CTAs, such as how or where a paper can be self-archived, affect the assignment of a self-archiving colour to the publisher. Value – The colour assignment is widely used by authors and repository administrators in determining whether academic papers can be self-archived. This paper provides a starting-point for further discussion and development of publisher classification in the open access environment.

Reconocimiento de Caracteres Ópticos Aplicaciones en Bibliotecas

Hoy día uno de los tópicos principales en la literatura bibliotecaria es el impacto y el uso de la nueva tecnología en el ambiente bibliotecario. La conversión de información por medio de computadora es una de las técnicas que ha causado mayor aceptación en bibliotecas.El reconocimiento de caracteres ópticos es una técnica sofisticada que ha alcanzado gran popularidad no solamente en organizaciones comerciales sino también en bibliotecas porque su versatilidad permite convertir material impreso o mecanografiado por medios Computacionales sin necesidad de digitar la información.El reconocimiento de caracteres ópticos ha sido exitosamente empleado en los sistemas de Circulación y Catalogación de las bibliotecas. También ha sido usado en el registro de reportes, documentos técnicos, páginas de contenido, índices de revistas, resúmenes, etc. Su futuro y aplicación en las bibliotecas es muy prometedor porque provee soluciones a problemas administrativos y facilita el proceso técnico de la información.

Effect of a control burn on lizards and their structural environment in a eucalypt open-forest

The composition of an open-forest lizard assemblage in eastern Australia was examined before and after a low-intensity controlled fire and concurrently compared with that in an adjoining unburnt area. The effect of fire on the available structural environment and the habitat used by two focal species, Carlia vivax and Lygisaurus foliorum, was also examined. Lizard species richness was unaffected by the controlled burn as was the abundance of most species. C. vivax was the only species to display a significant reduction in abundance after fire. While the low-intensity fire resulted in significant changes to the available structural environment, there were no compensatory shifts in the habitat preferences of either C. vivax or L. foliorum. The reduction in abundance of C. vivax was congruent with this species' avoidance of burnt areas. C. vivax displayed a non-random preference for ground cover and litter cover, which were reduced in burnt areas. Changes in the availability of preferred structural habitat features are likely to contribute to changes in the abundance of some lizard species. Therefore, even low-intensity disturbances can have an impact on lizard assemblages if critical habitat features are lost or become limiting.