Informing the structure of subjective well-being through examining changes in life satisfaction, positive affect, and negative affect

Subjective well-being (SWB) refers to how individuals evaluate and experience their lives in positive ways, and encompasses global judgments of life satisfaction (LS), as well as the frequency of positive and negative affect (PA and NA, respectively) in one’s life. To inform the current ambiguity concerning the structure of SWB, the aim of this Masters thesis was to evaluate the structure of SWB based on whether the three components of SWB change together or independently naturally, over time and following experimental manipulation. In Study 1, associations among changes in LS, PA, and NA were evaluated using a longitudinal approach tracking natural changes in the components over periods of three months and three years. Results indicated that change in one component was related to change in the other two components. In Study 2, an experimental design was used to manipulate each SWB component individually, and evaluate changes in all three components following each manipulation. Manipulation materials designed to target LS only were effective (i.e., led to heightened focus on LS, and not PA or NA) and created an increase in both LS and PA. Manipulation materials designed to target PA and NA only were not effective (i.e., led to heightened focus on the target component, as well as on LS). Furthermore, in both studies the strength of an individual’s SWB (assessed in terms of structural consistency and structural ambivalence in Study 1 and Study 2, along with subjective ambivalence in Study 2) did not consistently moderate the degree to which changes in the components were associated with one another. Together, these findings indicate that the structure of SWB may be complex and dynamic, rather than static. Alternatively, the components of SWB may not be easily manipulated in isolation of one another. Implications for existing structural models of SWB are discussed.

Impact de l'haploinsuffisance du gène Sim1 sur le développement et la fonction du noyau paraventriculaire de l'hypothalamus

L’obésité provient d’un déséquilibre de l’homéostasie énergétique, c’est-à-dire une augmentation des apports caloriques et/ou une diminution des dépenses énergétiques. Plusieurs données, autant anatomiques que physiologiques, démontrent que l’hypothalamus est un régulateur critique de l’appétit et des dépenses énergétiques. En particulier, le noyau paraventriculaire (noyau PV) de l’hypothalamus intègre plusieurs signaux provenant du système nerveux central (SNC) et/ou de la périphérie, afin de contrôler l’homéostasie énergétique via des projections axonales sur les neurones pré-ganglionnaires du système autonome situé dans le troc cérébral et la moelle épinière. Plusieurs facteurs de transcription, impliqués dans le développement du noyau PV, ont été identifiés. Le facteur de transcription SIM1, qui est produit par virtuellement tous les neurones du noyau PV, est requis pour le développement du noyau PV. En effet, lors d’une étude antérieure, nous avons montré que le noyau PV ne se développe pas chez les souris homozygotes pour un allèle nul de Sim1. Ces souris meurent à la naissance, probablement à cause des anomalies du noyau PV. Par contre, les souris hétérozygotes survivent, mais développent une obésité précoce. De façon intéressante, le noyau PV des souris Sim1+/- est hypodéveloppé, contenant 24% moins de cellules. Ces données suggèrent fortement que ces anomalies du développement pourraient perturber le fonctionnement du noyau PV et contribuer au développement du phénotype d’obésité. Dans ce contexte, nous avons entrepris des travaux expérimentaux ayant pour but d’étudier l’impact de l’haploinsuffisance de Sim1 sur : 1) le développement du noyau PV et de ses projections neuronales efférentes; 2) l’homéostasie énergétique; et 3) les voies neuronales physiologiques contrôlant l’homéostasie énergétique chez les souris Sim1+/-. A cette fin, nous avons utilisé : 1) des injections stéréotaxiques combinées à des techniques d’immunohistochimie afin de déterminer l’impact de l’haploinsuffisance de Sim1 sur le développement du noyau PV et de ses projections neuronales efférentes; 2) le paradigme des apports caloriques pairés, afin de déterminer l’impact de l’haploinsuffisance de Sim1 sur l’homéostasie énergétique; et 3) une approche pharmacologique, c’est-à-dire l’administration intra- cérébroventriculaire (i.c.v.) et/ou intra-péritonéale (i.p.) de peptides anorexigènes, la mélanotane II (MTII), la leptine et la cholécystokinine (CCK), afin de déterminer l’impact de l’haploinsuffisance de Sim1 sur les voies neuronales contrôlant l’homéostasie énergétique. Dans un premier temps, nous avons constaté une diminution de 61% et de 65% de l’expression de l’ARN messager (ARNm) de l’ocytocine (Ot) et de l’arginine-vasopressine (Vp), respectivement, chez les embryons Sim1+/- de 18.5 jours (E18.5). De plus, le nombre de cellules produisant l’OT et la VP est apparu diminué de 84% et 41%, respectivement, chez les souris Sim1+/- adultes. L’analyse du marquage axonal rétrograde des efférences du noyau PV vers le tronc cérébral, en particulier ses projections sur le noyau tractus solitaire (NTS) aussi que le noyau dorsal moteur du nerf vague (X) (DMV), a permis de démontrer une diminution de 74% de ces efférences. Cependant, la composition moléculaire de ces projections neuronales reste inconnue. Nos résultats indiquent que l’haploinsuffisance de Sim1 : i) perturbe spécifiquement le développement des cellules produisant l’OT et la VP; et ii) abolit le développement d’une portion importante des projections du noyau PV sur le tronc cérébral, et notamment ses projections sur le NTS et le DMV. Ces observations soulèvent donc la possibilité que ces anomalies du développement du noyau PV contribuent au phénotype d’hyperphagie des souris Sim1+/-. En second lieu, nous avons observé que la croissance pondérale des souris Sim1+/- et des souris Sim1+/+ n’était pas significativement différente lorsque la quantité de calories présentée aux souris Sim1+/- était la même que celle consommée par les souris Sim1+/+. De plus, l’analyse qualitative et quantitative des tissus adipeux blancs et des tissus adipeux bruns n’a démontré aucune différence significative en ce qui a trait à la taille et à la masse de ces tissus chez les deux groupes. Finalement, au terme de ces expériences, les souris Sim1+/--pairées n’étaient pas différentes des souris Sim1+/+ en ce qui a trait à leur insulinémie et leur contenu en triglycérides du foie et des masses adipeuses, alors que tous ces paramètres étaient augmentés chez les souris Sim1+/- nourries ad libitum. Ces résultats laissent croire que l’hyperphagie, et non une diminution des dépenses énergétiques, est la cause principale de l’obésité des souris Sim1+/-. Par conséquent, ces résultats suggèrent que : i) l’haploinsuffisance de Sim1 est associée à une augmentation de l’apport calorique sans toutefois moduler les dépenses énergétiques; ii) l’existence d’au moins deux voies neuronales issues du noyau PV : l’une qui régule la prise alimentaire et l’autre la thermogénèse; et iii) l’haploinsuffisance de Sim1 affecte spécifiquement la voie neuronale qui régule la prise alimentaire. En dernier lieu, nous avons montré que l’injection de MTII, de leptine ainsi que de CCK induit une diminution significative de la consommation calorique des souris des deux génotypes, Sim1+/+ et Sim1+/-. De fait, la consommation calorique cumulative des souris Sim1+/- et Sim1+/+ est diminuée de 37% et de 51%, respectivement, durant les 4 heures suivant l’administration i.p. de MTII comparativement à l’administration d’une solution saline. Lors de l’administration i.c.v. de la leptine, la consommation calorique cumulative des souris Sim1+/- et Sim1+/+ est diminuée de 47% et de 32%, respectivement. Finalement, l’injection i.p. de CCK diminue la consommation calorique des souris Sim1+/- et Sim1+/+ de 52% et de 36%, respectivement. L’ensemble des résultats suggère ici que l’haploinsuffisance de Sim1 diminue l’activité de certaines voies neuronales régulant l’homéostasie énergétique, et particulièrement de celles qui contrôlent la prise alimentaire. En résumé, ces travaux ont montré que l’haploinsuffisance de Sim1 affecte plusieurs processus du développement au sein du noyau PV. Ces anomalies du développement peuvent conduire à des dysfonctions de certains processus physiologiques distincts régulés par le noyau PV, et notamment de la prise alimentaire, et contribuer ainsi au phénotype d’obésité. Les souris hétérozygotes pour le gène Sim1 représentent donc un modèle animal unique, où l’hyperphagie, et non les dépenses énergétiques, est la principale cause de l’obésité. En conséquence, ces souris pourraient représenter un modèle expérimental intéressant pour l’étude des mécanismes cellulaires et moléculaires en contrôle de la prise alimentaire.

Évolution du risque cardiométabolique sur une période de quatre ans : étude chez des adultes béninois (Afrique de l’Ouest)

Les objectifs de l’étude de l’évolution du risque cardiométabolique (RCM) sur une période de quatre ans (2006-2010) chez des adultes béninois consistaient à: • Examiner les relations entre l’obésité abdominale selon les critères de la Fédération Internationale du Diabète (IFD) ou l’insulino-résistance mesurée par le Homeostasis Model Assessment (HOMA) et l’évolution des autres facteurs de RCM, • Examiner les liens entre les habitudes alimentaires, l’activité physique et les conditions socio-économiques et l’évolution du RCM évalué conjointement par le score de risque de maladies cardiovasculaires de Framingham (FRS) et le syndrome métabolique (SMet). Les hypothèses de recherche étaient: • L’obésité abdominale telle que définie par les critères de l’IDF est faiblement associée à une évolution défavorable des autres facteurs de RCM, alors que l’insulino-résistance mesurée par le HOMA lui est fortement associée; • Un niveau socioéconomique moyen, un cadre de vie peu urbanisé (rural ou semi-urbain), de meilleures habitudes alimentaires (score élevé de consommation d’aliments protecteurs contre le RCM) et l’activité physique contribuent à une évolution plus favorable du RCM. L’étude a inclus 541 sujets âgés de 25 à 60 ans, apparemment en bonne santé, aléatoirement sélectionnés dans la plus grande ville (n = 200), une petite ville (n = 171) et sa périphérie rurale (n = 170). Après les études de base, les sujets ont été suivis après deux et quatre ans. Les apports alimentaires et l’activité physique ont été cernés par deux ou trois rappels de 24 heures dans les études de base puis par des questionnaires de fréquence simplifiés lors des suivis. Les données sur les conditions socioéconomiques, la consommation d’alcool et le tabagisme ont été recueillies par questionnaire. Des mesures anthropométriques et la tension artérielle ont été prises. La glycémie à jeun, l’insulinémie et les lipides sanguins ont été mesurés. Un score de fréquence de consommation d’« aliments sentinelles » a été développé et utilisé. Un total de 416 sujets ont participé au dernier suivi. La prévalence initiale du SMet et du FRS≥10% était de 8,7% et 7,2%, respectivement. L’incidence du SMet et d’un FRS≥10% sur quatre ans était de 8,2% et 5%, respectivement. Le RCM s’était détérioré chez 21% des sujets. L’obésité abdominale définie par les valeurs seuils de tour de taille de l’IDF était associée à un risque plus élevé d’insulino-résistance: risque relatif (RR) = 5,7 (IC 95% : 2,8-11,5); d’un ratio cholestérol total/HDL-Cholestérol élevé: RR = 3,4 (IC 95% : 1,5-7,3); mais elle n’était pas associée à un risque significativement accru de tension artérielle élevée ou de triglycérides élevés. Les valeurs seuils de tour de taille optimales pour l’identification des sujets accusant au moins un facteur de risque du SMet étaient de 90 cm chez les femmes et de 80 cm chez les hommes. L’insulino-résistance mesurée par le HOMA était associée à un risque élevé d’hyperglycémie: RR = 5,7 (IC 95% : 2,8-11,5). En revanche, l’insulino-résistance n’était pas associée à un risque significatif de tension artérielle élevée et de triglycérides élevés. La combinaison de SMet et du FRS pour l’évaluation du RCM identifiait davantage de sujets à risque que l’utilisation de l’un ou l’autre outil isolément. Le risque de détérioration du profil de RCM était associé à un faible score de consommation des «aliments sentinelles» qui reflètent le caractère protecteur de l’alimentation (viande rouge, volaille, lait, œufs et légumes): RR = 5,6 (IC 95%: 1,9-16,1); et à l’inactivité physique: RR = 6,3 (IC 95%: 3,0-13,4). Les sujets de niveau socioéconomique faible et moyen, et ceux du milieu rural et semi-urbain avaient un moindre risque d’aggravation du RCM. L’étude a montré que les relations entre les facteurs de RCM présentaient des particularités chez les adultes béninois par rapport aux Caucasiens et a souligné le besoin de reconsidérer les composantes du SMet ainsi que leurs valeurs seuils pour les Africains sub-sahariens. La détérioration rapide du RCM nécessité des mesures préventives basées sur la promotion d’un mode de vie plus actif associé à de meilleures habitudes alimentaires.

Chert Nastapoka : caractérisation chimique et exploitation au Paléoesquimau, baie d’Hudson, Nunavik

Les assemblages lithiques dominent la plupart des sites archéologiques du Nunavik et constituent ainsi une véritable mine d’informations. Le nombre limité de travaux sur les matériaux de la côte est de la baie d’Hudson, nous a amené à nous pencher sur une source présente dans ce secteur. Notre objectif était alors de caractériser la matière première provenant de cette formation géologique, le chert Nastapoka. Pour ce faire, nous avons choisi la technique de fluorescence aux rayons X. Les résultats ont permis de constater, en plus des observations macroscopiques, la nature très variable de ce chert présentant une signature chimique complexe. Pour compléter le portrait, nous avons évalué l’utilisation du chert Nastapoka par les Paléoesquimaux par une comparaison d’analyses technologiques déjà effectuées sur les sites GhGk-4, GhGk-63 et IcGm-5. Cet examen a révélé que l’évolution des stratégies d’exploitation des matériaux lithiques dans cette région appui le continuum culturel Prédorsétien-Dorsétien observé ailleurs.

Nonparametric Estimation of Survivor Function in Bivariate Competing Risk Models’

So far, in the bivariate set up, the analysis of lifetime (failure time) data with multiple causes of failure is done by treating each cause of failure separately. with failures from other causes considered as independent censoring. This approach is unrealistic in many situations. For example, in the analysis of mortality data on married couples one would be interested to compare the hazards for the same cause of death as well as to check whether death due to one cause is more important for the partners’ risk of death from other causes. In reliability analysis. one often has systems with more than one component and many systems. subsystems and components have more than one cause of failure. Design of high-reliability systems generally requires that the individual system components have extremely high reliability even after long periods of time. Knowledge of the failure behaviour of a component can lead to savings in its cost of production and maintenance and. in some cases, to the preservation of human life. For the purpose of improving reliability. it is necessary to identify the cause of failure down to the component level. By treating each cause of failure separately with failures from other causes considered as independent censoring, the analysis of lifetime data would be incomplete. Motivated by this. we introduce a new approach for the analysis of bivariate competing risk data using the bivariate vector hazard rate of Johnson and Kotz (1975).

Collective dynamic properties in simple crystals: Influence of the structural disorder

Collective dynamic properties in Lennard-Jones crystals are investigated by molecular dynamics simulation. The study is focused on properties such as the dynamic structure factors, the longitudinal and transverse currents and the density of states. The influence on these properties of the structural disorder is analyzed by comparing the results for one-component crystals with those for liquids and supercooled liquids at analogous conditions. The effects of species-disorder on the collective properties of binary crystals are also discussed.

Comparing correspondence analysis and the log-ratio alternative for representing categorical data

We compare correspondance análisis to the logratio approach based on compositional data. We also compare correspondance análisis and an alternative approach using Hellinger distance, for representing categorical data in a contingency table. We propose a coefficient which globally measures the similarity between these approaches. This coefficient can be decomposed into several components, one component for each principal dimension, indicating the contribution of the dimensions to the difference between the two representations. These three methods of representation can produce quite similar results. One illustrative example is given

Modelling structural zeros in compositional data

This analysis was stimulated by the real data analysis problem of household expenditure data. The full dataset contains expenditure data for a sample of 1224 households. The expenditure is broken down at 2 hierarchical levels: 9 major levels (e.g. housing, food, utilities etc.) and 92 minor levels. There are also 5 factors and 5 covariates at the household level. Not surprisingly, there are a small number of zeros at the major level, but many zeros at the minor level. The question is how best to model the zeros. Clearly, models that try to add a small amount to the zero terms are not appropriate in general as at least some of the zeros are clearly structural, e.g. alcohol/tobacco for households that are teetotal. The key question then is how to build suitable conditional models. For example, is the sub-composition of spending excluding alcohol/tobacco similar for teetotal and non-teetotal households? In other words, we are looking for sub-compositional independence. Also, what determines whether a household is teetotal? Can we assume that it is independent of the composition? In general, whether teetotal will clearly depend on the household level variables, so we need to be able to model this dependence. The other tricky question is that with zeros on more than one component, we need to be able to model dependence and independence of zeros on the different components. Lastly, while some zeros are structural, others may not be, for example, for expenditure on durables, it may be chance as to whether a particular household spends money on durables within the sample period. This would clearly be distinguishable if we had longitudinal data, but may still be distinguishable by looking at the distribution, on the assumption that random zeros will usually be for situations where any non-zero expenditure is not small. While this analysis is based on around economic data, the ideas carry over to many other situations, including geological data, where minerals may be missing for structural reasons (similar to alcohol), or missing because they occur only in random regions which may be missed in a sample (similar to the durables)

Measurement Quality in Indicators of Compositions: a Compositional Multitrait-Multimethod Approach

Compositional data, also called multiplicative ipsative data, are common in survey research instruments in areas such as time use, budget expenditure and social networks. Compositional data are usually expressed as proportions of a total, whose sum can only be 1. Owing to their constrained nature, statistical analysis in general, and estimation of measurement quality with a confirmatory factor analysis model for multitrait-multimethod (MTMM) designs in particular are challenging tasks. Compositional data are highly non-normal, as they range within the 0-1 interval. One component can only increase if some other(s) decrease, which results in spurious negative correlations among components which cannot be accounted for by the MTMM model parameters. In this article we show how researchers can use the correlated uniqueness model for MTMM designs in order to evaluate measurement quality of compositional indicators. We suggest using the additive log ratio transformation of the data, discuss several approaches to deal with zero components and explain how the interpretation of MTMM designs di ers from the application to standard unconstrained data. We show an illustration of the method on data of social network composition expressed in percentages of partner, family, friends and other members in which we conclude that the faceto-face collection mode is generally superior to the telephone mode, although primacy e ects are higher in the face-to-face mode. Compositions of strong ties (such as partner) are measured with higher quality than those of weaker ties (such as other network members)

Biosecurity in agriculture: an economic analysis of coexistence of professional and hobby production

One component of biosecurity is protection against invasive alien species, which are one of the most important threats worldwide to native biodiversity and economic profitability in various sectors, including agriculture. However, agricultural producers are not homogeneous. They may have different objectives and priorities, use different technologies, and occupy heterogeneous parcels of land. If the producers differ in terms of their attitude towards invasive pests and the damages they cause, there are probably external effects in the form of pest spread impacts and subsequent damages caused. We study such impacts in the case of two producer types: profit-seeking professional producers and utility-seeking hobby producers. We show that the hobby producer, having first set a breeding ground for the pest, under-invests in pest control. We also discuss potential policy instruments to correct this market failure and highlight the importance of considering different stakeholders and their heterogeneous incentives when designing policies to control invasive alien species.

A simple analysis of thermodynamic properties for classical plasmas: I. theory

By eliminating the short range negative divergence of the Debye–Hückel pair distribution function, but retaining the exponential charge screening known to operate at large interparticle separation, the thermodynamic properties of one-component plasmas of point ions or charged hard spheres can be well represented even in the strong coupling regime. Predicted electrostatic free energies agree within 5% of simulation data for typical Coulomb interactions up to a factor of 10 times the average kinetic energy. Here, this idea is extended to the general case of a uniform ionic mixture, comprising an arbitrary number of components, embedded in a rigid neutralizing background. The new theory is implemented in two ways: (i) by an unambiguous iterative algorithm that requires numerical methods and breaks the symmetry of cross correlation functions; and (ii) by invoking generalized matrix inverses that maintain symmetry and yield completely analytic solutions, but which are not uniquely determined. The extreme computational simplicity of the theory is attractive when considering applications to complex inhomogeneous fluids of charged particles.

The Aqua-Planet Experiment (APE): CONTROL SST Simulation

Climate simulations by 16 atmospheric general circulation models (AGCMs) are compared on an aqua-planet, a water-covered Earth with prescribed sea surface temperature varying only in latitude. The idealised configuration is designed to expose differences in the circulation simulated by different models. Basic features of the aqua-planet climate are characterised by comparison with Earth. The models display a wide range of behaviour. The balanced component of the tropospheric mean flow, and mid-latitude eddy covariances subject to budget constraints, vary relatively little among the models. In contrast, differences in damping in the dynamical core strongly influence transient eddy amplitudes. Historical uncertainty in modelled lower stratospheric temperatures persists in APE. Aspects of the circulation generated more directly by interactions between the resolved fluid dynamics and parameterized moist processes vary greatly. The tropical Hadley circulation forms either a single or double inter-tropical convergence zone (ITCZ) at the equator, with large variations in mean precipitation. The equatorial wave spectrum shows a wide range of precipitation intensity and propagation characteristics. Kelvin mode-like eastward propagation with remarkably constant phase speed dominates in most models. Westward propagation, less dispersive than the equatorial Rossby modes, dominates in a few models or occurs within an eastward propagating envelope in others. The mean structure of the ITCZ is related to precipitation variability, consistent with previous studies. The aqua-planet global energy balance is unknown but the models produce a surprisingly large range of top of atmosphere global net flux, dominated by differences in shortwave reflection by clouds. A number of newly developed models, not optimised for Earth climate, contribute to this. Possible reasons for differences in the optimised models are discussed. The aqua-planet configuration is intended as one component of an experimental hierarchy used to evaluate AGCMs. This comparison does suggest that the range of model behaviour could be better understood and reduced in conjunction with Earth climate simulations. Controlled experimentation is required to explore individual model behaviour and investigate convergence of the aqua-planet climate with increasing resolution.

Investigation of sainfoin (Onobrychis viciifolia) cultivar differences on nitrogen balance and fecal egg count in artificially infected lambs

Research in ruminant nutrition and helminth control with forages, which contain condensed tannins (CT), suggests that varying responses may depend not only on CT concentration but also on CT composition. An experiment was designed to test this by feeding 2 dried sainfoin cultivars (Visnovsky and Perly), which differed in CT properties, to lambs that were artificially infected with the abomasal blood-sucking nematode Haemonchus contortus. Twenty-four infected lambs received one of these 2 cultivars; the feeds were either untreated or treated with the CT-binding polyethylene glycol over 4 wk (n = 6). The 2 cultivars were also fed to 2 × 6 uninfected lambs. Nutrient digestibility, N balance, ADG, plasma urea together with indicators of infection [fecal egg count (FEC), abomasal worm count, per capita female fecundity, erythrocytic indices, and serum protein] were determined. The specific effects of sainfoin cultivar, CT, and infection were evaluated by contrast analysis. Digestibility of both NDF and ADF were lower (P < 0.001) with Perly compared to Visnovsky. The apparent nutrient digestibility was reduced (P < 0.001) by CT. However, no clear cultivar effects were evident on N excretion and retention. Condensed tannins reduced (P = 0.05) body N retention and shifted (P < 0.001) N excretion from urine to feces. Unlike cultivar and CT, infection decreased (P = 0.002) ADG. Plasma urea concentration was lower (P = 0.007) in Perly- compared to Visnovsky-fed lambs and was decreased (P < 0.001) by CT. Plasma concentrations of essential and semi-essential AA were increased (P < 0.001) by CT. The groups of infected lambs did not clearly differ in abomasal worm counts and erythrocytic indicators. In the last 2 to 3 wk of the experiment, FEC was lower (P ≤ 0.01) when feeding CT. The lack of substantial cultivar effects suggests that the differences in CT properties may have been too small to result in nutritional and anthelmintic effects. The present results indicate that sainfoin CT had a mitigating effect on FEC and, consequently, pasture infectivity. However, the reduction was too low to expect any significant benefits in an Haemonchus-dominated system. Therefore, the use of sainfoin for controlling H. contortus should only be one component within an integrated worm control system.

What is outside? The early years foundation stage in England: outdoor facilities, organisation and staff attitudes

The purpose of this paper is to report on the facilities available, organisation of, and staff attitudes to early years outdoor education from schools within the south east of England, focusing on provision for children aged three to five. One component of the successful education of the child involves providing an ‘environment for learning’, including the facilities, layout and routines. This paper presents findings concerning the type and variety of facilities available outside; the various styles of organisation of the space; staff attitudes about: their roles, their aims for the environment, children’s behaviour and learning, and perceived drawbacks to practice. This paper draws on empirical data collected from schools within the University of Reading partnership. The findings suggest that although all early years settings must adhere to the statutory framework there are a range of facilities available, and there are a number of ways this environment is organised. Further there appears to be uncertainty about the adult role outside and the aims for activities. The conclusions drawn indicate that staff do not appear to be linking their aims for outdoor education to the facilities provided or to their actions outside. This means there is not a clear link between what staff provide outside and the declared ambitions for learning. This study is important as all educators need to be certain about their aims for education to ensure best outcomes for children. The implications of these findings for early years teachers are that they need to be able to articulate their aims for outdoor education and to provide the correct facilities to achieve these aims. Finally this study was undertaken to raise debate, posit questions and to ascertain the parameters for further research about the early years outdoor environment.

Supramolecular materials for inkjet printing: self-assembling polymer networks

Electronically complementary, low molecular weight polymers that self-assemble through tuneable π-π stacking interactions to form extended supramolecular polymer networks have been developed for inkjet printing applications and successfully deposited using three different printing techniques. Sequential overprinting of the complementary components results in supramolecular network formation through complexation of π-electron rich pyrenyl or perylenyl chain-ends in one component with π-electron deficient naphthalene diimide residues in a chain-folding polyimide. The complementary π-π stacked polymer blends generate strongly coloured materials as a result of charge-transfer absorptions in the visible spectrum, potentially negating the need for pigments or dyes in the ink formulation. Indeed, the final colour of the deposited material can be tailored by changing varying the end-groups of the π electron rich polymer component. Piezoelectric printing techniques were employed in a proof of concept study to allow characterisation of the materials deposited, and a thermal inkjet printer adapted with imaging software enabled a detailed analysis of the ink-drops as they formed, and of their physical properties. Finally, continuous inkjet printing allowed greater volumes of material to be deposited, on a variety of different substrate surfaces, and demonstrated the utility and versatility of this novel type of ink for industrial applications.