Junction Field Effect on the Retention Time for One-Transistor Floating-Body RAM

One-transistor floating-body random access memory retention time distribution is investigated on silicon-on-insulator UTBOX devices. It is shown that the average retention time can be improved by two to three orders of magnitude by reducing the body-junction electric field. However, the retention time distribution, which is mainly caused by the generation-recombination center density variation, remains similar.

Enzimi, acidi organici ed altri metaboliti coinvolti nella patogenesi di Penicillium spp

Blue mould caused by Penicillium expansum Link is one of the most destructive rot of pome fruit in all growing areas (Snowdon, 1990; Jones and Aldwinckle, 1991; Tonini,1996) In the past, Penicillium rot has been controlled by fungicide postharvest treatment mainly by thiabendazole (TBZ) and benomyl (Hardenburg and Spalding, 1972), but their intense use produced the appearance of resistant strains with a great reduction of their activity The aims of the present study were to characterize the isolates of Pencillium sp causing blue mold on pear in Italy by physiological and biochemical parameters. In particular differencing also the behavior of isolates to relationship with sensitivity or resistance to TBZ treatments. We have examined the early stage of infection in relation to enzyme activity, local modulation of pH, production of organic acids, and to secondary metabolism of pathogen. The results described here confirm that the majority of P. expansum isolates from pears packing houses are resistant to TBZ, Among the TBZ-resistant isolates scored in this work, different isolates (RR) showed higher percentage of conidial germination on TBZ-amended medium compared to non amended medium. This may indicate a stimulatory effect of TBZ on conidial germination. Therefore TBZ treatments are not only ineffective for controlling P. expansum, but they may also increase the severity of blue mould on fruits. In the absence of fungicide, isolates showed a significant difference for infection severity, R and RR isolates are characterized by higher pathogenic fitness on fruits, producing larger lesions than S isolates. These data are supported by the study with laboratory-induced resistant isolates, which shows the lack of correlation between TBZ resistance and osmotic sensitivity, and highlights the association between TBZ resistance and infection severity (Baraldi et al 2003). Enzymatic screening gave a positive reaction to esterase, urease, pectinase activity, in addition, the pathogen is able to synthesize a complex enzyme act to degrade the main components of the cell wall especially pectin and cellulose. Isolated sensitive and resistant are characterized by a good activity of pectinase, especially from poligactoronase, which, as already reported by several studies (D'hallewin et al, 2004; Prusky et al, 2004), are the basis of degradative process of cell wall. Also, although the measure was minor also highlighted some activities of cellulase, but even note in the production of this kind of cellulase and hemicellulase P. Expansum were not targeted, studies have found no other source of information in this regard. Twenty isolates of Penicillium expansum, were tested in vitro ad in vivo for acid production ability and pH drop. We have found that modulation of pH and the organic acids extrusion were influence to various parameter:  Initial pH: in general, the greatest reduction of pH was observed in isolates grown at pH 7, except for four isolates that maintained the pH of the medium close to 7, the others significantly decreased the pH, ranging from 5.5 to 4.1.. In extreme acid condition (pH 3,0) growth and modulation of pH is most lower respect optimal condition (pH 5,0). Also isolates R and RR have showed a greater adaptation to environmental condition more than isolates S.  Time: although the acidification continues for some days, PH modulation is strongest in early hours (48-72 hours)of inoculation process. Time also affects the quality of organic acids, for example in vitro results showed an initial abundant production of succinc acid, followed to important production of galacturoinc acid.  Substrates: there are many differences for the type of acids produced in vitro and in vivo. Results showed in vivo an abundant production of galacturonic, malic, and citric acids and some unknown organic acids in smaller concentrations. Secondary metabolite analysis revealed intra-specific differences, and patulin was found in all isolates, but most significant reduction was observed between in vitro and in vivo samples. There was no correlation between the concentration of patulin, and the percentage of infected fruits, but sample with a lower infection severity of rotten area than the others, showed a significantly lower mycotoxin concentration than samples with a higher lesion diameter of rotten area. Beyond of patulin was detected the presence of another secondary metabolite, penitrem A.

Untersuchungen zur Zell-Transistor-Kopplung mittels der Voltage-Clamp-Technik

Untersuchungen zur Zell-Transistor Kopplung mittels der Voltage-Clamp TechnikIn der vorliegenden Arbeit wird die extrazelluläre Einkopplung elektrischer Signale von Zellen in Transistoren hinsichtlich der an der Kopplung beteiligten Parameter untersucht. Dafür werden Zellen aus Primärkulturen und von Zell-Linien direkt auf den aktiven Sensorflächen der hergestellten Chips kultiviert. Für die Experimente werden n- und p-Kanal Feldeffekttransistoren (FET) sowie Extended-Gate-Elektroden (EGE) mit Gold- und Titanoberflächen entwickelt.Zur Untersuchung der Kopplungseigenschaften werden die neuronale Zell-Linie SH-SY5Y, die humane Endothel Zell-Linie EA.hy-926 sowie als Primärzellen hippocampale Neuronen und Kardiomyozyten embryonaler und neonataler Ratten eingesetzt. Die Voltage-Clamp Technik erlaubt die Untersuchung spannungsgesteuerter Ionenkanäle in der Zellmembran. Maßgebend für den Signalverlauf des extrazellulär eingekoppelten Signals ist der Ionenstrom von Na+, K+ und Ca2+ durch die Membran im Kontaktbereich zwischen Zelle und Sensor.Die Kopplung kann elektrisch mithilfe eines Ersatzschaltkreises beschrieben werden, der alle beteiligten elektrischen Größen der Membran und der Ionenströme, sowie die Parameter des Kontaktbereichs und des Sensors enthält.Die Simulation der extrazellulären Signale zeigt, dass die beobachteten Signalformen nur durch eine Erhöhung der Ionenkanaldichten und dadurch einer deutlich vergrößerten Leitfähigkeit der Ionenarten im Kontaktbereich gegenüber der freien Membran erklärt werden können.

Characterisation of the cell-transistor coupling

Die Verbindung von elektrisch aktiven, lebenden Zellen zu extrazellulären Sensorsystemen eröffnet vielfälige Möglichkeiten im Bereich der Biosensorik. Die vorliegende Arbeit leistet einen Beitrag zum tieferen Verständnis der elektrischen Kopplungsmechanismen zwischen den biologischen und elektronischen Teilen solcher Hybridsysteme. Es wurden dazu drei Hauptbereiche bearbeitet:Ein System zur extrazellulären Signalableitung an lebenden Zellen bestehend aus einem Sensorchip, einem Vorverstärkerkopf und einem Hauptverstärker wurde weiterentwickelt.Als Sensoren wurden entweder Metallmikroelektroden-Chips mit 64 Kanälen oder Feldeffekt Transistoren-Chips mit 16 Kanälen (FET) eingesetzt. Es wurden zusätzlich spezielle FET Sensoren mit Rückseitenkontakten hergestellt und eingesetzt.Die elektrische Kopplung von einzelnen Nervenzellen der neuronalen Zell-Linien SH-SY5Y und TR14 oder primär kultivierten Neuronen aus dem Hirnstamm oder dem Hippocampus von embryonalen Ratten mit den extrazellulären Sensoren wurde untersucht. In der 'whole-cell' Patch-Clamp Technik wurden die Beiträge der spannungsgesteuerten Na+- und K+-Ionenkanäle zur extrazellulären Signalform identifiziert. Die Simulation der Signale mit einem Ersatzschaltkreis (Punkt-Kontakt Modell), der in PSPICE implementiert wurde, deutet auf eine starke Abhängigkeit der Signalformen in bezug auf Konzentrationsänderungen von Na+- und K+-Ionen im Volumenbereich zwischen Zelle und den ionensensitiven Transistoren hin. Ein empirisch erweitertes Punkt-Kontakt Modell wurde daraufhin vorgestellt.Im dritten Teil der Arbeit wurden Zellschichten von Kardiomyocyten embryonaler Ratten auf den extrazellulären Sensoren kultiviert. Die Eignung eines solchen Hybridsensors als Modellherz fuer das pharmazeutische Screeing wurde durch Messungen mit Herzstimulanzien und -relaktanzien bestätigt.

In situ real-time investigation of Organic Ultra-Thin-Film transistors: growth, electrical properties and biosensing applications

Organic electronics has grown enormously during the last decades driven by the encouraging results and the potentiality of these materials for allowing innovative applications, such as flexible-large-area displays, low-cost printable circuits, plastic solar cells and lab-on-a-chip devices. Moreover, their possible field of applications reaches from medicine, biotechnology, process control and environmental monitoring to defense and security requirements. However, a large number of questions regarding the mechanism of device operation remain unanswered. Along the most significant is the charge carrier transport in organic semiconductors, which is not yet well understood. Other example is the correlation between the morphology and the electrical response. Even if it is recognized that growth mode plays a crucial role into the performance of devices, it has not been exhaustively investigated. The main goal of this thesis was the finding of a correlation between growth modes, electrical properties and morphology in organic thin-film transistors (OTFTs). In order to study the thickness dependence of electrical performance in organic ultra-thin-film transistors, we have designed and developed a home-built experimental setup for performing real-time electrical monitoring and post-growth in situ electrical characterization techniques. We have grown pentacene TFTs under high vacuum conditions, varying systematically the deposition rate at a fixed room temperature. The drain source current IDS and the gate source current IGS were monitored in real-time; while a complete post-growth in situ electrical characterization was carried out. At the end, an ex situ morphological investigation was performed by using the atomic force microscope (AFM). In this work, we present the correlation for pentacene TFTs between growth conditions, Debye length and morphology (through the correlation length parameter). We have demonstrated that there is a layered charge carriers distribution, which is strongly dependent of the growth mode (i.e. rate deposition for a fixed temperature), leading to a variation of the conduction channel from 2 to 7 monolayers (MLs). We conciliate earlier reported results that were apparently contradictory. Our results made evident the necessity of reconsidering the concept of Debye length in a layered low-dimensional device. Additionally, we introduce by the first time a breakthrough technique. This technique makes evident the percolation of the first MLs on pentacene TFTs by monitoring the IGS in real-time, correlating morphological phenomena with the device electrical response. The present thesis is organized in the following five chapters. Chapter 1 makes an introduction to the organic electronics, illustrating the operation principle of TFTs. Chapter 2 presents the organic growth from theoretical and experimental points of view. The second part of this chapter presents the electrical characterization of OTFTs and the typical performance of pentacene devices is shown. In addition, we introduce a correcting technique for the reconstruction of measurements hampered by leakage current. In chapter 3, we describe in details the design and operation of our innovative home-built experimental setup for performing real-time and in situ electrical measurements. Some preliminary results and the breakthrough technique for correlating morphological and electrical changes are presented. Chapter 4 meets the most important results obtained in real-time and in situ conditions, which correlate growth conditions, electrical properties and morphology of pentacene TFTs. In chapter 5 we describe applicative experiments where the electrical performance of pentacene TFTs has been investigated in ambient conditions, in contact to water or aqueous solutions and, finally, in the detection of DNA concentration as label-free sensor, within the biosensing framework.

Studio sull'applicazione di derivati dell'ammina di betti chirali in sistemi catalitici organici

In this thesis, the development of asymmetric α-alkylation of aldehydes using two new organocatalysts is described. Nowadays organocatalized asymmetric synthesis uses preferentially primary or secondary amines. In our case two new Betti bases derivatives have been used as organocatalysts. We tried to find a method based on resolution to obtain both enantiomers with ee major than 90%. At the end we tried them in an organocatalytic processes which involve indole derivatives and aldehydes as substrates. In questa tesi è descritto lo sviluppo del processo di alfa-alchilazione di aldeidi utilizzando due nuovi catalizzatori organici chirali. Al giorno d’oggi la sintesi asimmetrica organo catalitica sfrutta principalmente ammine primarie e secondarie chirali. Come organo catalizzatori, sono stati utilizzati due nuovi derivati della base di Betti. E’ stato ricercato un metodo che permettesse di risolvere entrambi gli enantiomeri e che permettesse di ottenere un eccesso enantiomerico maggiore del 90%. Infine questi catalizzatori sono stati utilizzati e ottimizzati in micro-processi che utilizzano un substrato indolico e di un’aldeide.

Manipolazione dell'attività di scariche parziali tramite nanocoatings ibridi organici-inorganici

In un'epoca storica nella quale si va incontro ad un tasso di guasto sempre maggiore a causa dell'invecchiamento, diventa necessaria l'adozione di sistemi diagnostici in grado di stimare e prolungare l'esatto istante in cui si avrà il guasto. Per fare questo generalmente si valuta l'attività di scariche parziali in un sistema isolante e si cerca di frenarla. In questo lavoro innovativo però, la scelta di base non è quella di frenare l'attività di scariche, ma di limitarla alla base, agendo sulla natura fisica dei processi associati alle scariche.

Excitonic processes in multifunctional organic semiconductors for application in organic-light emitting transistor

In this thesis, I report on a comprehensive study about the photo-physical properties both in solution and in solid-state of a new thiophene based material (2,2’-(2,2’-bithiophene-5,5’-diyl)bis(5-butyl-5H-thieno[2,3-c]pyrrole-4,6)-dione (T4DIM) which shows an ambipolar semiconducting behavior together with electroluminescence in single-layer OLET device architecture[14

Interpretazione dei fenomeni di trasporto in cristalli organici semiconduttori

Alcuni ricercatori del Dipartimento di Fisica e Astronomia di Bologna hanno di recente ottenuto una curva che descrive l’andamento della mobilità in funzione della temperatura a seguito di misure effettuate su un cristallo organico di rubicene che mostra un’interdipendenza delle due variabili molto particolare. Il mio compito è stato cercare di far luce sulle peculiarità di questa curva. Per fare questo mi sono servita di due articoli, frutto di un attuale studio condotto da tre ricercatori dell’Università di Napoli, che ho riportato nel secondo e nel terzo capitolo, che hanno cercato di spiegare il comportamento atipico della mobilità in funzione della temperatura in cristalli organici semiconduttori.

Rivelatori organici di raggi x

L’interesse della ricerca per le applicazioni dei materiali organici all’elettronica è cresciuto ampiamente negli ultimi anni e alcuni gruppi di ricerca hanno studiato la possibilità di sfruttare materiali organici per costruire rivelatori diretti di raggi X. Nel 2003 si immaginava che l’assenza di elementi con numero atomico alto, propria della maggior parte degli organici, scoraggiasse il loro impiego come rivelatori. Tuttavia, la recente scoperta delle proprietà di fotoassorbimento dei monocristalli di 4-idrossicianobenzene (4HCB) potrebbe smentire questa ipotesi e, anzi, suscitare un certo interesse applicativo. Tra i possibili vantaggi operativi del 4HCB come rivelatore ci potrebbero essere, oltre al basso costo, tensioni di funzionamento sull’ordine dei volt e una certa flessibilità meccanica. L’obiettivo del seguente lavoro di tesi è esplorare la risposta che forniscono i monocristalli di 4HCB ai raggi X quando vengono installati su matrici flessibili con elettrodi di contatto in geometrie particolari, interspaziati di 22 µm. Sono state condotte varie misure di risposta elettrica al buio e sotto un fascio di raggi X e nel seguito saranno presentati i risultati. Il primo capitolo è dedicato ad un’introduzione teorica alla struttura dei materiali organici e ai modelli di trasporto dei semiconduttori organici. È evidenziato il fatto che non esiste ad oggi una teoria comprensiva ed efficace come per gli inorganici e vengono discussi alcuni metodi per determinare sperimentalmente la mobilità. La teoria Space Charge Limited Current (SCLC), che modella le caratteristiche corrente-tensione di un solido di piccolo spessore, quando il materiale ha bassa conducibilità e il suo trasporto di carica è mediato sostanzialmente da portatori dello stesso segno, viene introdotta nel capitolo 2. L’importanza di questo modello sta nel fatto che fornisce un metodo efficace per determinare sperimentalmente la mobilità dei portatori in molti materiali organici. Il campo dei rivelatori organici diretti di raggi X è piuttosto recente, e non esiste ancora un’efficace inquadratura teorica. Per questo motivo il capitolo 3 espone lo stato attuale dei rivelatori di raggi X e presenta i meccanismi alla base dei rivelatori inorganici diretti a stato solido e poi discute dei rivelatori organici indiretti già esistenti, gli scintillatori. La descrizione degli apparati sperimentali utilizzati per le misure viene demandata al capitolo 4, mentre il quinto capitolo espone i risultati ottenuti.