Sistema gràfic de depuració per xarxes (NoC)

Aquest projecte descriu el disseny i desenvolupament d’una eina gràfica per a la depuració de projectes desenvolupats amb un llenguatge de descripció de sistemes com és el SystemC. Amb aquest llenguatge s’ha desenvolupat una NoC (Network on Chip). L’eina desenvolupada mostra de forma visual l’arquitectura de la xarxa NoC, els valors dels senyals que es transmeten a través de la xarxa i estadístiques sobre aquests per tal de poder fer un seguiment exhaustiu i agilitzar la recerca d’errors com interbloquejos, pèrdua de dades i d’altres. Al concentrar en un únic entorn la descripció de la NoC i les dades relatives a les senyals en temps de simulació, proporciona un valor afegit a altres eines disponibles per a realitzar aquesta tasca.

Design of Novel Frequency Generation Circuit with Application to Ultra-Wideband Distributed Oscillators

Given the urgence of a new paradigm in wireless digital trasmission which should allow for higher bit rate, lower latency and tigher delay constaints, it has been proposed to investigate the fundamental building blocks that at the circuital/device level, will boost the change towards a more efficient network architecture, with high capacity, higher bandwidth and a more satisfactory end user experience. At the core of each transciever, there are inherently analog devices capable of providing the carrier signal, the oscillators. It is strongly believed that many limitations in today's communication protocols, could be relieved by permitting high carrier frequency radio transmission, and having some degree of reconfigurability. This led us to studying distributed oscillator architectures which work in the microwave range and possess wideband tuning capability. As microvave oscillators are essentially nonlinear devices, a full nonlinear analyis, synthesis, and optimization had to be considered for their implementation. Consequently, all the most used nonlinear numerical techniques in commercial EDA software had been reviewed. An application of all the aforementioned techniques has been shown, considering a systems of three coupled oscillator ("triple push" oscillator) in which the stability of the various oscillating modes has been studied. Provided that a certain phase distribution is maintained among the oscillating elements, this topology permits a rise in the output power of the third harmonic; nevertheless due to circuit simmetry, "unwanted" oscillating modes coexist with the intenteded one. Starting with the necessary background on distributed amplification and distributed oscillator theory, the design of a four stage reverse mode distributed voltage controlled oscillator (DVCO) using lumped elments has been presented. All the design steps have been reported and for the first time a method for an optimized design with reduced variations in the output power has been presented. Ongoing work is devoted to model a wideband DVCO and to implement a frequency divider.

Major: Electronics and Communication Engineering

Today, information technology is strategically important to the goals and aspirations of the business enterprises, government and high-level education institutions – university. Universities are facing new challenges with the emerging global economy characterized by the importance of providing faster communication services and improving the productivity and effectiveness of individuals. New challenges such as provides an information network that supports the demands and diversification of university issues. A new network architecture, which is a set of design principles for build a network, is one of the pillar bases. It is the cornerstone that enables the university’s faculty, researchers, students, administrators, and staff to discover, learn, reach out, and serve society. This thesis focuses on the network architecture definitions and fundamental components. Three most important characteristics of high-quality architecture are that: it’s open network architecture; it’s service-oriented characteristics and is an IP network based on packets. There are four important components in the architecture, which are: Services and Network Management, Network Control, Core Switching and Edge Access. The theoretical contribution of this study is a reference model Architecture of University Campus Network that can be followed or adapted to build a robust yet flexible network that respond next generation requirements. The results found are relevant to provide an important complete reference guide to the process of building campus network which nowadays play a very important role. Respectively, the research gives university networks a structured modular model that is reliable, robust and can easily grow.

Optimal information transmission in organizations: Search and congestion

We propose a stylized model of a problem-solving organization whoseinternal communication structure is given by a fixed network. Problemsarrive randomly anywhere in this network and must find their way to theirrespective specialized solvers by relying on local information alone.The organization handles multiple problems simultaneously. For this reason,the process may be subject to congestion. We provide a characterization ofthe threshold of collapse of the network and of the stock of foatingproblems (or average delay) that prevails below that threshold. We buildupon this characterization to address a design problem: the determinationof what kind of network architecture optimizes performance for any givenproblem arrival rate. We conclude that, for low arrival rates, the optimalnetwork is very polarized (i.e. star-like or centralized ), whereas it islargely homogenous (or decentralized ) for high arrival rates. We also showthat, if an auxiliary assumption holds, the transition between these twoopposite structures is sharp and they are the only ones to ever qualify asoptimal.

Structural covariance of superficial white matter in mild Alzheimer's disease compared to normal aging.

INTRODUCTION: Interindividual variations in regional structural properties covary across the brain, thus forming networks that change as a result of aging and accompanying neurological conditions. The alterations of superficial white matter (SWM) in Alzheimer's disease (AD) are of special interest, since they follow the AD-specific pattern characterized by the strongest neurodegeneration of the medial temporal lobe and association cortices. METHODS: Here, we present an SWM network analysis in comparison with SWM topography based on the myelin content quantified with magnetization transfer ratio (MTR) for 39 areas in each hemisphere in 15 AD patients and 15 controls. The networks are represented by graphs, in which nodes correspond to the areas, and edges denote statistical associations between them. RESULTS: In both groups, the networks were characterized by asymmetrically distributed edges (predominantly in the left hemisphere). The AD-related differences were also leftward. The edges lost due to AD tended to connect nodes in the temporal lobe to other lobes or nodes within or between the latter lobes. The newly gained edges were mostly confined to the temporal and paralimbic regions, which manifest demyelination of SWM already in mild AD. CONCLUSION: This pattern suggests that the AD pathological process coordinates SWM demyelination in the temporal and paralimbic regions, but not elsewhere. A comparison of the MTR maps with MTR-based networks shows that although, in general, the changes in network architecture in AD recapitulate the topography of (de)myelination, some aspects of structural covariance (including the interhemispheric asymmetry of networks) have no immediate reflection in the myelination pattern.

Integration of Bridge Damage Detection Concepts and Components (3 volumes), TR-636, 2013

This work is divided into three volumes: Volume I: Strain-Based Damage Detection; Volume II: Acceleration-Based Damage Detection; Volume III: Wireless Bridge Monitoring Hardware. Volume I: In this work, a previously-developed structural health monitoring (SHM) system was advanced toward a ready-for-implementation system. Improvements were made with respect to automated data reduction/analysis, data acquisition hardware, sensor types, and communication network architecture. The statistical damage-detection tool, control-chart-based damage-detection methodologies, were further investigated and advanced. For the validation of the damage-detection approaches, strain data were obtained from a sacrificial specimen attached to the previously-utilized US 30 Bridge over the South Skunk River (in Ames, Iowa), which had simulated damage,. To provide for an enhanced ability to detect changes in the behavior of the structural system, various control chart rules were evaluated. False indications and true indications were studied to compare the damage detection ability in regard to each methodology and each control chart rule. An autonomous software program called Bridge Engineering Center Assessment Software (BECAS) was developed to control all aspects of the damage detection processes. BECAS requires no user intervention after initial configuration and training. Volume II: In this work, a previously developed structural health monitoring (SHM) system was advanced toward a ready-for-implementation system. Improvements were made with respect to automated data reduction/analysis, data acquisition hardware, sensor types, and communication network architecture. The objective of this part of the project was to validate/integrate a vibration-based damage-detection algorithm with the strain-based methodology formulated by the Iowa State University Bridge Engineering Center. This report volume (Volume II) presents the use of vibration-based damage-detection approaches as local methods to quantify damage at critical areas in structures. Acceleration data were collected and analyzed to evaluate the relationships between sensors and with changes in environmental conditions. A sacrificial specimen was investigated to verify the damage-detection capabilities and this volume presents a transmissibility concept and damage-detection algorithm that show potential to sense local changes in the dynamic stiffness between points across a joint of a real structure. The validation and integration of the vibration-based and strain-based damage-detection methodologies will add significant value to Iowa’s current and future bridge maintenance, planning, and management Volume III: In this work, a previously developed structural health monitoring (SHM) system was advanced toward a ready-for-implementation system. Improvements were made with respect to automated data reduction/analysis, data acquisition hardware, sensor types, and communication network architecture. This report volume (Volume III) summarizes the energy harvesting techniques and prototype development for a bridge monitoring system that uses wireless sensors. The wireless sensor nodes are used to collect strain measurements at critical locations on a bridge. The bridge monitoring hardware system consists of a base station and multiple self-powered wireless sensor nodes. The base station is responsible for the synchronization of data sampling on all nodes and data aggregation. Each wireless sensor node include a sensing element, a processing and wireless communication module, and an energy harvesting module. The hardware prototype for a wireless bridge monitoring system was developed and tested on the US 30 Bridge over the South Skunk River in Ames, Iowa. The functions and performance of the developed system, including strain data, energy harvesting capacity, and wireless transmission quality, were studied and are covered in this volume.

Transfer entropy reconstruction and labeling of neuronal connections from simulated calcium imaging

Neuronal dynamics are fundamentally constrained by the underlying structural network architecture, yet much of the details of this synaptic connectivity are still unknown even in neuronal cultures in vitro. Here we extend a previous approach based on information theory, the Generalized Transfer Entropy, to the reconstruction of connectivity of simulated neuronal networks of both excitatory and inhibitory neurons. We show that, due to the model-free nature of the developed measure, both kinds of connections can be reliably inferred if the average firing rate between synchronous burst events exceeds a small minimum frequency. Furthermore, we suggest, based on systematic simulations, that even lower spontaneous inter-burst rates could be raised to meet the requirements of our reconstruction algorithm by applying a weak spatially homogeneous stimulation to the entire network. By combining multiple recordings of the same in silico network before and after pharmacologically blocking inhibitory synaptic transmission, we show then how it becomes possible to infer with high confidence the excitatory or inhibitory nature of each individual neuron.

Using Pareto optimality to explore the topology and dynamics of the human connectome.

Graph theory has provided a key mathematical framework to analyse the architecture of human brain networks. This architecture embodies an inherently complex relationship between connection topology, the spatial arrangement of network elements, and the resulting network cost and functional performance. An exploration of these interacting factors and driving forces may reveal salient network features that are critically important for shaping and constraining the brain's topological organization and its evolvability. Several studies have pointed to an economic balance between network cost and network efficiency with networks organized in an 'economical' small-world favouring high communication efficiency at a low wiring cost. In this study, we define and explore a network morphospace in order to characterize different aspects of communication efficiency in human brain networks. Using a multi-objective evolutionary approach that approximates a Pareto-optimal set within the morphospace, we investigate the capacity of anatomical brain networks to evolve towards topologies that exhibit optimal information processing features while preserving network cost. This approach allows us to investigate network topologies that emerge under specific selection pressures, thus providing some insight into the selectional forces that may have shaped the network architecture of existing human brains.

IP Telephony in Third Generation Mobile Systems: Transport Layer Dimensioning

Tämä diplomityö käsittelee kolmannen sukupolven matkaviestinjärjestelmien kuljetuskerroksen mitoitusta. Nykyisten matkapuhelinverkkojen korvaajiksi suunnitellut kolmannen sukupolven matkaviestinjärjestelmät tulevat yhdistämään perinteisen puhelinviestinnän ja uudenlaiset datapalvelut. Uudet verkot tulevat perustumaan pakettivälitteiseen tiedonsiirtoon joka mahdollistaa molempien liikennetyyppien, puheen sekä datan, siirtämisen samassa verkossa. Tämän ratkaisun uskotaan tarjoavan paremmat mahdollisuudet uusien palvelujen luomiseen ja parantavan tiedonsiirtokapasiteettia. Siirtyminen pakettivälitteiseen tiedonsiirtoon aiheuttaa kuitenkin suuria muutoksia verkkoarkkitehtuurissa. Tässä diplomityössä tarkastellaan tulevien runkoverkkojen mitoitukseen liittyviä näkökohtia sekä muodostetaan alustavia kuljetuskerroksen mitoitusohjeita. Diplomityö on tehty osaksi diplomi-insinöörin tutkintoa Lappeenrannan teknillisessä korkeakoulussa. Työ on tehty Nokia Networksin palveluksessa Helsingissä, vuoden 2000 toisella puoliskolla.

UMTS-radioverkon ja GSM-runkoverkon yhdistävän moduulin järjestelmätestaus

Tämän diplomityön aiheena oli tutkia ATM-moduulin järjestelmätestaustarpeita. ATM-moduuli on osa Nokian kolmannen generaation matkapuhelinverkkoarkkitehtuuria. Työ tehtiin Nokia Networks Oyj:lle MSC&HLR-tuotelinjan järjestelmätestausjaokselle. Työssä käsitellään aluksi GSM- ja UMTS-verkkojen arkkitehtuureja, protokollia ja toimintoja, sekä tutustutaan ATM-tekniikkaan, jota käytetään UMTS-liityntäverkon tiedonvälityksessä. Tämän jälkeen perehdytään ATM-moduulin rakenteeseen ja toimintoihin. Työssä perehdytään järjestelmätestauksen eri osa-alueisiin, niiden testilaitteille asettamiin vaatimuksiin sekä hahmotellaan järjestelmätestauksen päälinjoja.

Managing Packet Data (Sessions) in 3G Mobile Networks

Tällä hetkellä kolmannen sukupolven matkapuhelinjärjestelmät ovat siirtyneet kaupalliseen vaiheeseen. Universal Mobile Telecommunication System (UMTS) on eräs kolmannen sukupolven matkapuhelinjärjestelmä, jota tullaan käyttämään Euroopassa. Diplomityön päämääränä on tutkia, kuinka pakettivälitteistä tiedonsiirtoa hallitaan UMTS - verkoissa. Diplomityö antaa yleiskuvan toisen sukupolven matkapuhelinjärjestelmien datapalveluiden kehityksestä kolmannen sukupolven nopeisiin matkapuhelinjärjestelmiin. Pakettivälitteisen verkon verkkoarkkitehtuuri on esitetty sekä sen, diplomityön kannalta, tärkeimpien osien toiminnallisuus on selvitetty. Myös pakettipohjaisten datayhteyksien eli istuntojen muodostaminen ja vapauttaminen sekä aktiivisen yhteyden ominaisuuksien muokkaaminen on esitetty tässä diplomityössä. Yhteydenhallintaprotokolla, Session Management (SM), on yksi protokolla, joka osallistuu pakettidatayhteyden hallintaan. SM -protokolla on käsitelty työssä yksityiskohtaisesti. SM -protokollan SDL toteutus on esitetty diplomityön käytännönosassa

Kolmannen sukupolven matkaviestinverkon puhelunohjaus MSC Server –konseptilla

Tietoliikenneala elää muutosten aikaa. Vanhat piirikytketyt kapeakaistaiset verkot ovat väistymässä seuraavan sukupolven verkkojen tieltä. GPRS-verkot tekevät tuloaan ja 3G-verkkojen kehitystyö on kiivaimmillaan laitetoimittajien ratkoessa verkoille asetettuja haasteita. Jää nähtäväksi, kykenevätkö 3G-verkot vastaamaan näihin haasteisiin. Työssä käsitellään 3G-verkon arkkitehtuuria, toimintaa ja puhelunohjausta MSC Server -konseptissa, sekä käydään läpi muutamia puheluesimerkkejä. 3G-verkon arkkitehtuuri, jossa puhelunohjaus on erotettu mediakerroksesta, esitetään ja uudet verkkoelementit ja niiden toiminta käsitellään. Esitelty teoria perustuu kirjallisuuteen sekä yleisesti hyväksyttyihin 3G- verkon standardeihin. Näitä standardeja julkaisevat muun muassa ITU-T ja 3GPP yhdessä yhteistyöyritystensä kanssa. Standardointityö on monin osin vielä kesken ja se on vaikeuttanut 3G-verkkojen suunnittelutyötä merkittävästi. Työn tarkoituksena on selvittää puhelunohjausta 3G-verkossa ja sen toteuttamista MSC Server –konseptilla. MSC Serverin toteutusvaihtoehtoja arvioidaan ja niistä valitaan yksi 3G-verkon puhelunohjauksen toteutusmalliksi. Työtä jatketaan tämän diplomityön jälkeen tarkemman toteutuksen suunnittelulla, päämääränä rakentaa 3G-verkko.

Operatiivisten järjestelmien integrointi toimintojen ohjaukseen vaneritehtaassa

Työn tavoite oli löytää malli, joka mahdollistaisi kaikkien tilaus- toimitusprosessin operatiivisten järjestelmien integroimisen keskenään siten, että niitä voidaan hyödyntää valmistuksen ohjaukseen. Vaneritehtaissa ei ole keskitettyä tietojärjestelmää, joten tavoiteasetanta edellytti vaneritehtaan tietoverkon rakentamiseen liittyvän ongelmakentän periaatteellista ratkaisua.Koska tilaus- toimitusprosessi, tuotantoa lukuunottamatta, oli kohdeyrityksessä katettu tietojärjestelmillä, loivat nämä jo olemassa olevat järjestelmät reunaehdot ratkaisulle myös tuotannon tietoverkon kehittämisessä. Työssä etsittiin ja kiinnitettiin avaimet, joilla tuote- sekä henkilötieto saadaan identifioitua keskenään integroiduissa järjestelmissä niin, että informaatioketju ei katkea siirryttäessä järjestelmästä toiseen.Työssä ratkaistiin tietoverkon liityntä tuotantolaitteisiin valvomotuotteen avulla. Liittymisratkaisuja esiteltiin neljä. Nämä mallit kattavat suurimman osan vaneritehtaassa eteen tulevista tapauksista. Näiden lisäksi päädyttiin suosittamaan erään mekaanisen metsäteollisuuden laitetoimittajan luomaa tiedonkeruu- ja tuotannonsuunnitteluohjelmistoa, joka valmiina ratkaisuna edesauttaa tietoverkon nopeaa implementointia.

Handling of TDM Connections with Cello Media Gateway

UMTS is a 3rd generation telecommunication system, which introduces new network architecture. The change in the network architecture introduces new logical network nodes and changes the role of existing nodes in the network. This architecture changes the current vertically specialized network into a horizontally layered structure. In practice, the layering means that different levels in network hierarchy are separated, and they communicate over well-specified interfaces. The Connectivity Layer, at the bottom of the UMTS network architecture, contains Media Gateways (MGW). The GSM radio access network and UMTS access network are connected to the connectivity network via a MGW. External networks, e.g. ISDN networks, are accessed via other MGWs. The user plane is transported across the connectivity network between/via MGWs. ATM network is used as the backbone in Ericsson’s UMTS core network release 2.0. The main goal of this thesis is to study how the MGW is used to bridge ATM and TDM networks. The Circuit Emulation Service (CES) for ATM is studied, as the conversion from TDM to ATM is made according it. The transportation is made using AAL2 and the issues that it has with voice traffic are studied. The implementation and usage of TDM switching service in MGW are described in detail.

Operational Cost Reduction in WDM Networks using Lighttours

Wavelength division multiplexing (WDM) networks have been adopted as a near-future solution for the broadband Internet. In previous work we proposed a new architecture, named enhanced grooming (G+), that extends the capabilities of traditional optical routes (lightpaths). In this paper, we compare the operational expenditures incurred by routing a set of demands using lightpaths with that of lighttours. The comparison is done by solving an integer linear programming (ILP) problem based on a path formulation. Results show that, under the assumption of single-hop routing, almost 15% of the operational cost can be reduced with our architecture. In multi-hop routing the operation cost is reduced in 7.1% and at the same time the ratio of operational cost to number of optical-electro-optical conversions is reduced for our architecture. This means that ISPs could provide the same satisfaction in terms of delay to the end-user with a lower investment in the network architecture