Knowledge effect on firm performance in manufacturing and service firms

This thesis seeks to examine the difference between manufacturing and service firms with respect to the effects of knowledge on performance, and the influence of market turbulence in this relationship. Empirical data, resulting from a survey, was collected from more than 1,206 firms, involving several sectors. Two samples were analyzed, one with 334 manufacturing and other with 509 service firms. The findings indicate no significant difference in the importance of knowledge on performance between these sectors in the absence of market turbulence: knowledge development (KD) has a stronger effect than culture of competitiveness (CC) on firm performance. However, under market turbulence, manufacturers differ from service providers. The positive effect of KD is enhanced, while the positive effect of CC remains the same for manufacturing firms. On the other hand, the positive effect of KD is diminished, while the positive effect of CC is enhanced for service firms. This supports the argument concerning differences in the nature of manufacturing and service industries. From a managerial point of view, results confirm the importance of knowledge, irrespective of firm sector or market turbulence. However, while industrial firms should center efforts on KD, service firms must find a balance where knowledge development (e.g. norms, processes, routines) does not impair their culture of competitiveness (e.g. learning, innovation, action). The thesis contributes to existing literature by proposing that: (1) the positive effect of knowledge on performance is confirmed; (2) under turbulent markets manufacturing and service firms have different responses concerning the influence of knowledge on performance; (3) a multidimensional performance construct based on cost, profitability, and growth is an interesting way to evaluate firm sustained competitive advantage, rather than one-dimensional constructs; (4) the CC x KD interaction, found relevant for supply chains in previous studies, is not supported for firms; (5) differences in unit of analysis, e.g. from supply chains to firms, result in different effects of KD and CC on firm performance; (6) existing scales can be improved with the addition of more diverse indicators, capturing a wider range of concepts (e.g. information transfer measurement); and (7) results from previous studies are supported for Brazilian firms, contributing for theory generalization.

Powerful CEOs and their impact on corporate performance

We argue in this paper that executives can only impact firm outcomes if they have influence over crucial decisions. Based on this idea we develop and test a hypothesis about how CEOs’ power to influence decisions will affect firm performance: since managers’ opinions may differ, firms whose CEOs have more decision-making power should experience more variability in firm performance. Thus performance depends on the interaction between executive characteristics and organizational variables. By focusing on this interaction we are able to use firm-level characteristics to test predictions that are related to unobservable managerial characteristics. Using such firmlevel characteristics of the Executive Office we develop a proxy for the CEO’s power to influence decisions and provide evidence consistent with our hypothesis. Firm performance (measured by Tobin’s Q, stock returns and ROA) is significantly more variable for firms with greater values of our proxy for CEO influence power. The results are robust across various tests designed to detect differences in variability.

Two heads may not be better than one : corporate board structure, managerial self-dealing,and common agency

This paper compares the effects on corporate performance and managerial self-dealing in a situation in which the CEO reports to a single Board that is responsible for both monitoring management and establishing performance targets to an alternative in which the CEO reports to two Boards, each responsible for a different task. The equilibrium set of the common agency game induced by the dual board structure is fully characterized. Compared to a single board, a dual board demands less aggressive performance targets from the CEO, but exerts more monitoring. A consequence of the first feature is that the CEO always exerts less effort toward production with a dual board. The effect of a dual board on CEO self-dealing is ambiguous: there are equilibria in which, in spite of the higher monitoring, self-dealing is higher in a dual system. The model indicates that the strategic interdependence generated by the assignment of different tasks to different boards may yield results that are far from the desired ones.

Assesment of port governance in Brazil: a managerial perspective on the port of Santos

The role of maritime transportation within international trade was drastically revamped during the inception of the globalization process, which enhanced the contribution of ports in world economy as main logistics gateways for global production and trade. As a result, the relationship between ports and governments has changed. Devolution ideologies that had been applied in other industries decades ago were now being considered by governments for the port industry. Many central governments sought to extract themselves from commercial activities of ports and devolving this responsibility to local governments, communities or private entities. The institution of devolution programs also changed the governance structures of ports further influencing port performance. Consequently, the recent worldwide trend towards devolution in the port industry has spawned considerable variety of governance models that are now set in place around the world. While some countries opt for more decentralized structures others prefer to retain a centralization of powers. In this way some governments consider local features and national integration more than others, which ultimately influence the success of a port reform implementation. Nevertheless, the prime intent of governments is now to maximize the efficiency and performance of their domestic ports. This issue intends to examine the changed port governance environment in Brazil by determining how and why imposed port reforms of the Brazilian federal government have been affecting the overall performance of the national port system, over the last decades, using the Port of Santos as a sample upon an exploratory study. For that, the study will use a contingency theory-based framework – the Matching Framework - that views port performance as a function of the fit among the dimensions of external operating environment, strategy and structure of a port organization. In essence, the greater the fit among these dimensions the better the expected performance of a port will be, and vice-versa. Port managers, government officials and academics alike shall be interested in this document.

Analysis of the interplay between knowledge and performance management in industrial clusters

The concept of industrial clustering has been studied in-depth by policy makers and researchers from many fields, mainly due to the competitive advantages it may bring to regional economies. Companies often take part in collaborative initiatives with local partners while also taking advantage of knowledge spillovers to benefit from locating in a cluster. Thus, Knowledge Management (KM) and Performance Management (PM) have become relevant topics for policy makers and cluster associations when undertaking collaborative initiatives. Taking this into account, this paper aims to explore the interplay between both topics using a case study conducted in a collaborative network formed within a cluster. The results show that KM should be acknowledged as a formal area of cluster management so that PM practices can support knowledge-oriented initiatives and therefore make better use of the new knowledge created. Furthermore, tacit and explicit knowledge resulting from PM practices needs to be stored and disseminated throughout the cluster as a way of improving managerial practices and regional strategic direction. Knowledge Management Research & Practice (2012) 10, 368-379. doi:10.1057/kmrp.2012.23

Separation of Ownership from Control and Discretionary Managerial Behaviour in a Transition Economy

This study was the final stage of a four-year study of managerial behaviour and company performance in Bulgaria and examined the influence of changing ownership and control structures of companies on managerial behaviour and initiative. It provides a theoretical summary of the specific types of ownership, control, governance structures and managerial strategies in the Bulgarian transitional economy during 1992-1996. It combines two theoretical approaches, the property-rights approach to show concentrated property-rights structure and private and majority types of control as determinants of efficient enterprise risk bearing and constrained managerial discretion, and the agency theory approach to reveal the efficient role of direct non-market governance mechanisms over managers. Mr. Peev also used empirical information collected from the Central Statistical office in Bulgaria, three different enterprise investigations of corporatised state-owned enterprises between 1992 and 1994, and his own data base of privatised and private de novo industrial companies in 1996-1996. The project gives a detailed description of the main property-rights structures in Bulgaria at the present time and of the various control structures related to these. It found that there is a strong owner type of control in private and privatised firms, although, contrary to expectations, 100% state -owned enterprises tended to be characterised by a separation of ownership from control, leaving scope for managerial discretion. Mr. Peev predicts that after the forthcoming mass privatisation, many companies will acquire a dispersed ownership structure and there will be a greater separation of ownership from control and potential or inefficient managerial behaviour. The next aspect considered in detail was governance structures and the influence of the generally unstable macroeconomic environment in the country during the period in question. In examining managerial strategies, Mr. Peev divided the years since 1990 into 3 periods. Even in the first period (1990-1992) there were some signs of a more efficient role for managers and between 1992 and 1994 the picture of control structures and different managerial behaviour in state-owned companies became more diversified. Managerial strategies identified included managerial initiatives for privatisation, where managers took initiative in resolving problems of property rights and introducing restructuring measures and privatisation proposals, managerial initiatives for restructuring without privatisation, and passive adjustment and passive management, where managers seek outside services for marketing, finance management, etc. in order to adjust to the new environment. During 1995-1996 some similarities and differences between the managerial behaviour of privatised and state-owned firms emerged. Firstly, the former have undergone many changes in investment and technology, while managers of state-owned companies have changed little in this field, indicating that the private property-rights structure is more efficient for the long-term adaptation of enterprises. In the area of strategies relating to product quality, marketing, and pricing policy there was little difference between managers of private, privatised and state-owned firms. The most passive managerial behaviour was found in non-incorporated state-owned firms, although these have only an insignificant stake in the economy.

Limited managerial attention and corporate aging

As firms have more assets in place, more of management’s limited attention is focused on managing assets in place rather than developing new growth options. Consequently, as firms grow older, they have fewer growth options and a lower ability to generate new growth options. This simple theory predicts that Tobin’s q falls with age. Further, competition in the product market is expected to slow down the decrease in Tobin’s q because it forces firms to look for alternative sources of rents. Similarly, greater competition in the labor market reduces the decrease in Tobin’s q with age because old firms are in a better position to hire employees that can help with innovation. In contrast, competition in the market for corporate control should accelerate the decline because it forces management to focus more on managing assets in place whose performance is more directly observable than on developing growth options where results may not be observable for some time. We find strong support for these predictions in tests using exogenous variation in competition.

Limited managerial attention and corporate aging

As firms have more assets in place, more of management’s limited attention is focused on managing assets in place rather than developing new growth options. Consequently, as firms grow older, they have fewer growth options and a lower ability to generate new growth options. This simple theory predicts that Tobin’s q falls with age. Further, competition in the product market is expected to slow down the decrease in Tobin’s q because it forces firms to look for alternative sources of rents. Similarly, greater competition in the labor market reduces the decrease in Tobin’s q with age because old firms are in a better position to hire employees that can help with innovation. In contrast, competition in the market for corporate control should accelerate the decline because it forces management to focus more on managing assets in place whose performance is more directly observable than on developing growth options where results may not be observable for some time. We find strong support for these predictions in tests using exogenous variation in competition

Executive compensation and the performance of the firm

A sample of large industrial corporations is examined to determine whether there is a relationship between the levels of compensation received by the senior executives of those firms and the firms' economic performances. We find consistent evidence of such a relationship, with differences across firms in the total compensation of their three highest-paid officers being positively related to differences in both the common stock returns and operating profitability of the firms. The implication is that compensation packages are designed to reduce agency costs.

New Product Portfolio Performance in Family Firms

This study investigates the relationship between top management team (TMT) innovation orientation and new product portfolio performance in small and medium-sized family firms by exploring two family firm-specific sources of TMT diversity as moderators: the number of generations involved in the TMT and the ratio of family members in the TMT. Results indicate that family-induced diversity in the TMT has opposing moderating effects. Although a positive relationship exists between TMT innovation orientation and new product portfolio performance when multiple generations are involved in the TMT, TMT innovation orientation and new product portfolio performance experience a negative relationship when the ratio of family members in the TMT is high. The study discusses theoretical and managerial implications of the findings and develops avenues for future research.

Quality management, environmental management and firm performance in the Spanish hotel industry

Comunicación presentada en el XVI Simposio Internacional de Turismo y Ocio, ESADE, 23 mayo 2007.

Modelling knowledge production performance of research centres with a focus on triple bottom line benchmarking

We demonstrate a portable process for developing a triple bottom line model to measure the knowledge production performance of individual research centres. For the first time, this study also empirically illustrates how a fully units-invariant model of Data Envelopment Analysis (DEA) can be used to measure the relative efficiency of research centres by capturing the interaction amongst a common set of multiple inputs and outputs. This study is particularly timely given the increasing transparency required by governments and industries that fund research activities. The process highlights the links between organisational objectives, desired outcomes and outputs while the emerging performance model represents an executive managerial view. This study brings consistency to current measures that often rely on ratios and univariate analyses that are not otherwise conducive to relative performance analysis.

A model of service performance enhancement:the role of transactional and transformational leadership

This paper is concerned with the ways in which transactional and transformational leadership styles can improve the service performance of front-line staff. Past literature on services marketing has indicated the importance of leadership but has largely ignored the parallel literature in which leadership styles have been conceptualized and operationalized (e.g., sales management, organizational psychology). This paper seeks to build upon existing services marketing theory by introducing the role of leadership styles in enhancing service performance. Consequently, a conceptual framework of the effect of transactional and transformational leadership styles on service performance, anchored in a crossdisciplinary literature review, is developed. Managerial implications and future research directions are also discussed.

Ownership structure and operating performance: evidence from the European maritime industry

In this paper we examine the relation between ownership structure and operating performance for European maritime firms. Using a sample of 266 firm-year observations, during the period 2002–2004, we provide evidence that operating performance is positively related with foreign held shares and investment corporation held shares, indicating better investor protection from managerial opportunism. We also find no relation between operating performance and employee held shares, suggesting no relation between employee commitment and firms’ economic performance. Furthermore, we find no relation between operating performance and government held shares, indicating that government may not adequately protect shareholders’ interests from managerial opportunism. Finally, we do find a positive relation between operating performance and portfolio held shares for code law maritime firms but not for common law maritime firms. Results are robust after adjusting for various firm and country risk characteristics. Overall, our results on the importance of the ownership structure are new to this setting and add to a large body of evidence linking ownership characteristics to corporate performance.

Introduction: improving manufacturing performance through technology diffusion, implementation and management

The role of technology management in achieving improved manufacturing performance has been receiving increased attention as enterprises are becoming more exposed to competition from around the world. In the modern market for manufactured goods the demand is now for more product variety, better quality, shorter delivery and greater flexibility, while the financial and environmental cost of resources has become an urgent concern to manufacturing managers. This issue of the International Journal of Technology Management addresses the question of how the diffusion, implementation and management of technology can improve the performance of manufacturing industries. The authors come from a large number of different countries and their contributions cover a wide range of topics within this general theme. Some papers are conceptual, others report on research carried out in a range of different industries including steel production, iron founding, electronics, robotics, machinery, precision engineering, metal working and motor manufacture. In some cases they describe situations in specific countries. Several are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the conference theme was 'Achieving Competitive Edge: Getting Ahead Through Technology and People'. The first two papers deal with questions of advanced manufacturing technology implementation and management. Firstly Beatty describes a three year longitudinal field study carried out in ten Canadian manufacturing companies using CADICAM and CIM systems. Her findings relate to speed of implementation, choice of system type, the role of individuals in implementation, organization and job design. This is followed by a paper by Bessant in which he argues that a more a strategic approach should be taken towards the management of technology in the 1990s and beyond. Also considered in this paper are the capabilities necessary in order to deploy advanced manufacturing technology as a strategic resource and the way such capabilities might be developed within the firm. These two papers, which deal largely with the implementation of hardware, are supplemented by Samson and Sohal's contribution in which they argue that a much wider perspective should be adopted based on a new approach to manufacturing strategy formulation. Technology transfer is the topic of the following two papers. Pohlen again takes the case of advanced manufacturing technology and reports on his research which considers the factors contributing to successful realisation of AMT transfer. The paper by Lee then provides a more detailed account of technology transfer in the foundry industry. Using a case study based on a firm which has implemented a number of transferred innovations a model is illustrated in which the 'performance gap' can be identified and closed. The diffusion of technology is addressed in the next two papers. In the first of these, by Lowe and Sim, the managerial technologies of 'Just in Time' and 'Manufacturing Resource Planning' (or MRP 11) are examined. A study is described from which a number of factors are found to influence the adoption process including, rate of diffusion and size. Dahlin then considers the case of a specific item of hardware technology, the industrial robot. Her paper reviews the history of robot diffusion since the early 1960s and then tries to predict how the industry will develop in the future. The following two papers deal with the future of manufacturing in a more general sense. The future implementation of advanced manufacturing technology is the subject explored by de Haan and Peters who describe the results of their Dutch Delphi forecasting study conducted among a panel of experts including scientists, consultants, users and suppliers of AMT. Busby and Fan then consider a type of organisational model, 'the extended manufacturing enterprise', which would represent a distinct alternative pure market-led and command structures by exploiting the shared knowledge of suppliers and customers. The three country-based papers consider some strategic issues relating manufacturing technology. In a paper based on investigations conducted in China He, Liff and Steward report their findings from strategy analyses carried out in the steel and watch industries with a view to assessing technology needs and organizational change requirements. This is followed by Tang and Nam's paper which examines the case of machinery industry in Korea and its emerging importance as a key sector in the Korean economy. In his paper which focuses on Venezuela, Ernst then considers the particular problem of how this country can address the problem of falling oil revenues. He sees manufacturing as being an important contributor to Venezuela's future economy and proposes a means whereby government and private enterprise can co-operate in development of the manufacturing sector. The last six papers all deal with specific topics relating to the management manufacturing. Firstly Youssef looks at the question of manufacturing flexibility, introducing and testing a conceptual model that relates computer based technologies flexibility. Dangerfield's paper which follows is based on research conducted in the steel industry. He considers the question of scale and proposes a modelling approach determining the plant configuration necessary to meet market demand. Engstrom presents the results of a detailed investigation into the need for reorganising material flow where group assembly of products has been adopted. Sherwood, Guerrier and Dale then report the findings of a study into the effectiveness of Quality Circle implementation. Stillwagon and Burns, consider how manufacturing competitiveness can be improved individual firms by describing how the application of 'human performance engineering' can be used to motivate individual performance as well as to integrate organizational goals. Finally Sohal, Lewis and Samson describe, using a case study example, how just-in-time control can be applied within the context of computer numerically controlled flexible machining lines. The papers in this issue of the International Journal of Technology Management cover a wide range of topics relating to the general question of improving manufacturing performance through the dissemination, implementation and management of technology. Although they differ markedly in content and approach, they have the collective aim addressing the concepts, principles and practices which provide a better understanding the technology of manufacturing and assist in achieving and maintaining a competitive edge.