The reform of the European Energy Tax Directive reform : effect on prices

[spa] Para hacer frente a los riesgos relacionados con la contaminación atmosférica, es ampliamente aceptada la necesidad de instrumentos de política encaminados a reducir las emisiones. La intervención tiene por objeto reducir las conductas contaminantes y incentivar una conducta más respetuosa y el uso de tecnologías más eficientes. La Unión Europea cuenta con dos importantes mecanismos económicos para el control de emisiones a escala europea: la directiva sobre los impuestos energéticos, un instrumento de fiscalidad ambiental aprobado en 2003 que afecta el precio de los productos energéticos, y el sistema de comercio de los derechos de emisiones, introducido en 2005, que afecta directamente a la cantidad de emisiones de CO2. En 2011, la Comisión Europea propuso una nueva versión de la directiva sobre los impuestos energéticos. El objetivo principal de la propuesta es aumentar la eficacia del instrumento a través de una mayor presión fiscal sobre los productos energéticos y de coordinar este instrumento de fiscalidad medioambiental con el sistema de comercio de los derechos de emisiones, para establecer una señal de precio de CO2 coherente para todos los sectores. Sin embargo, en mayo de 2012 el Parlamento Europeo bloqueó la propuesta de la nueva versión del impuesto, y el proceso de actualización se detuvo. La preocupación principal parecía ser el efecto de dicha propuesta en la competitividad, en particular para los sectores que serían los más afectados dado el uso intensivo de los productos energéticos, como el sector del transporte. El objetivo de este estudio es analizar el efecto que la reforma de la directiva sobre los impuestos energéticos podría tener sobre el nivel de precios, en particular en los países de la Unión Europea donde esta reforma implicaría un aumento de los impuestos energéticos. Utilizando datos del proyecto “World Input-Output Database”, la principal conclusión es que el nuevo sistema de impuestos energéticos tendría un impacto muy bajo sobre los precios. Por lo tanto, dado que los precios no serían fuertemente afectados por la reforma, no habrá inconvenientes para la competitividad y implicaciones en términos de distribución, pero, por otro lado, este resultado también implica una baja capacidad de esta reforma para provocar cambios en el consumo y la producción hacia menos presiones ambientales.

Business Models of Packaging Machinery Manufacturers – Case Study

The goal of the study was to find a proper frame to understand business models and study business models of the chosen companies in packaging machinery manufacturing. Good practices and tips are searched from business models which have helped companies to success. Packaging industry’s future is also examined in front of different kinds of changes and the influence which they have on machinery manufacturer’s business models. In the theory part business models’ history and the best frame suitable for this study are presented. The chosen case companies have been discussed according to the frame, and they have been compared to each other to point out the differences. The good practices noticed in companies and according to information from other sources, new business model has been constructed including things that should be noticed while constructing a new business model. The information sources of this study where interviews, annual reports, companies presentations and web pages. The type of study was an interpretative case study.

An overview of the proposal for a new Package Travel Directive

After an endless wait, a proposal for a new Package Travel Directive repealing Directive 90/314/EEC1 was presented on 9 July 2013 (hereafter, the Proposal).This article is aimed at providing an overall view of the Proposal. I will address the following issues: The concept of traveller; online package holidays and assisted travel arrangements; information requirements; a new particular right of withdrawal for package travel; other changes to the contract before the start of the package; performance of the Package; and insolvency protection. Some early concluding remarks are made as to when a future Package Travel Directive might take place at some future date

Soil penetration resistance in a rhodic eutrudox affected by machinery traffic and soil water content

Soil compaction caused by machinery traffic reduces crop yields. This study aimed to evaluate the effects of intensive traffic, and the soil water content, on the soil penetration resistance (PR) of a Rhodic Eutrudox (Distroferric Red Latosol, Brazilian Classification), managed under no-tillage (NT). The experiment consisted of six treatments: NT with recent chiseling, NT without additional compaction, and NT with additional compaction by 4, 8, 10 and 20 passes of a harvester with a weight of 100 kN (70 kN on the front axle). Undisturbed soil samples were collected at 5.5-10.5 cm and 13.5-18.5 cm depth to quantify the soil bulk density (BD). The PR was assessed in four periods, using an impact penetrometer, inserted in the soil to a depth of 46 cm. The effect of traffic intensities on the PR was small when this variable was assessed with the soil in the plastic consistency. Differences in PR among treatments increased as the soil water content decreased. The increase in the values of PR and BD was higher in the first passes, but the increase in the number of traffics resulted in deeper soil compaction. The machinery traffic effects on PR are better characterized in the friable soil consistency.

AGRICULTURAL MACHINERY AND IMPLEMENTS DESIGN PROCESS: GUIDELINES FOR SMALL AND MID-SIZED BUSINESSES

ABSTRACT This study aims at presenting the process of machine design and agricultural implements by means of a reference model, formulated with the purpose of explaining the development activities of new products, serving as a guideline to coach human resources and to assist in formalizing the process in small and medium-sized businesses (SMB), i.e. up to 500 employees. The methodology used included the process modeling, carried out from case studies in the SMB, and the study of reference models in literature. The modeling formalism used was based on the IDEF0 standard, which identifies the dimensions required for the model detailing: input information; activities; tasks; knowledge domains; mechanisms; controls and information produced. These dimensions were organized in spreadsheets and graphs. As a result, a reference model with 27 activities and 71 tasks was obtained, distributed over four phases of the design process. The evaluation of the model was carried out by the companies participating in the case studies and by experts, who concluded that the model explains the actions needed to develop new products in SMB.

Vibrations in Rotating Machinery Arising from Minor Imperfections in Component Geometries

Vibrations in machines can cause noise, decrease the performance, or even damage the machine. Vibrations appear if there is a source of vibration that excites the system. In the worst case scenario, the excitation frequency coincides with the natural frequency of the machine causing resonance. Rotating machines are a machine type, where the excitation arises from the machine itself. The excitation originates from the mass imbalance in the rotating shaft, which always exists in machines that are manufactured using conventional methods. The excitation has a frequency that is dependent on the rotational speed of the machine. The rotating machines in industrial use are usually designed to rotate at a constant rotational speed, the case where the resonances can be easily avoided. However, the machines that have a varying operational speed are more problematic due to a wider range of frequencies that have to be avoided. Vibrations, which frequencies equal to rotational speed frequency of the machine are widely studied and considered in the typical machine design process. This study concentrates on vibrations, which arise from the excitations having frequencies that are multiples of the rotational speed frequency. These vibrations take place when there are two or more excitation components in a revolution of a rotating shaft. The dissertation introduces four studies where three kinds of machines are experiencing vibrations caused by different excitations. The first studied case is a directly driven permanent magnet generator used in a wind power plant. The electromagnetic properties of the generator cause harmonic excitations in the system. The dynamic responses of the generator are studied using the multibody dynamics formulation. In another study, the finite element method is used to study the vibrations of a magnetic gear due to excitations, which frequencies equal to the rotational speed frequency. The objective is to study the effects of manufacturing and assembling inaccuracies. Particularly, the eccentricity of the rotating part with respect to non-rotating part is studied since the eccentric operation causes a force component in the direction of the shortest air gap. The third machine type is a tube roll of a paper machine, which is studied while the tube roll is supported using two different structures. These cases are studied using different formulations. In the first case, the tube roll is supported by spherical roller bearings, which have some wavinesses on the rolling surfaces. Wavinesses cause excitations to the tube roll, which starts to resonate at the frequency that is a half of the first natural frequency. The frequency is in the range where the machine normally operates. The tube roll is modeled using the finite element method and the bearings are modeled as nonlinear forces between the tube roll and the pedestals. In the second case studied, the tube roll is supported by freely rotating discs, which wavinesses are also measured. The above described phenomenon is captured as well in this case, but the simulation methodology is based on the flexible multibody dynamics formulation. The simulation models that are used in both of the last two cases studied are verified by measuring the actual devices and comparing the simulated and measured results. The results show good agreement.

Novel virtual environment and real-time simulation based methods for improving life-cycle efficiency of non-road mobile machinery

Virtual environments and real-time simulators (VERS) are becoming more and more important tools in research and development (R&D) process of non-road mobile machinery (NRMM). The virtual prototyping techniques enable faster and more cost-efficient development of machines compared to use of real life prototypes. High energy efficiency has become an important topic in the world of NRMM because of environmental and economic demands. The objective of this thesis is to develop VERS based methods for research and development of NRMM. A process using VERS for assessing effects of human operators on the life-cycle efficiency of NRMM was developed. Human in the loop simulations are ran using an underground mining loader to study the developed process. The simulations were ran in the virtual environment of the Laboratory of Intelligent Machines of Lappeenranta University of Technology. A physically adequate real-time simulation model of NRMM was shown to be reliable and cost effective in testing of hardware components by the means of hardware-in-the-loop (HIL) simulations. A control interface connecting integrated electro-hydraulic energy converter (IEHEC) with virtual simulation model of log crane was developed. IEHEC consists of a hydraulic pump-motor and an integrated electrical permanent magnet synchronous motorgenerator. The results show that state of the art real-time NRMM simulators are capable to solve factors related to energy consumption and productivity of the NRMM. A significant variation between the test drivers is found. The results show that VERS can be used for assessing human effects on the life-cycle efficiency of NRMM. HIL simulation responses compared to that achieved with conventional simulation method demonstrate the advances and drawbacks of various possible interfaces between the simulator and hardware part of the system under study. Novel ideas for arranging the interface are successfully tested and compared with the more traditional one. The proposed process for assessing the effects of operators on the life-cycle efficiency will be applied for wider group of operators in the future. Driving styles of the operators can be analysed statistically from sufficient large result data. The statistical analysis can find the most life-cycle efficient driving style for the specific environment and machinery. The proposed control interface for HIL simulation need to be further studied. The robustness and the adaptation of the interface in different situations must be verified. The future work will also include studying the suitability of the IEHEC for different working machines using the proposed HIL simulation method.

Dengue virus-induced regulation of the host cell translational machinery

Dengue virus (DV)-induced changes in the host cell protein synthesis machinery are not well understood. We investigated the transcriptional changes related to initiation of protein synthesis. The human hepatoma cell line, HepG2, was infected with DV serotype 2 for 1 h at a multiplicity of infection of one. RNA was extracted after 6, 24 and 48 h. Microarray results showed that 36.5% of the translation factors related to initiation of protein synthesis had significant differential expression (Z-score ≥ ±2.0). Confirmation was obtained by quantitative real-time reverse transcription-PCR. Of the genes involved in the activation of mRNA for cap-dependent translation (eIF4 factors), eIF4A, eIF4G1 and eIF4B were up-regulated while the negative regulator of translation eIF4E-BP3 was down-regulated. This activation was transient since at 24 h post-infection levels were not significantly different from control cells. However, at 48 h post-infection, eIF4A, eIF4E, eIF4G1, eIF4G3, eIF4B, and eIF4E-BP3 were down-regulated, suggesting that cap-dependent translation could be inhibited during the progression of infection. To test this hypothesis, phosphorylation of p70S6K and 4E-BP1, which induce cap-dependent protein synthesis, was assayed. Both proteins remained phosphorylated when assayed at 6 h after infection, while infection induced dephosphorylation of p70S6K and 4E-BP1 at 24 and 48 h of infection, respectively. Taken together, these results provide biological evidence suggesting that in HepG2 cells DV sustains activation of the cap-dependent machinery at early stages of infection, but progression of infection switches protein synthesis to a cap-independent process.

Design and Simulation of High-Speed Rotating Electrical Machinery

Global energy consumption has been increasing yearly and a big portion of it is used in rotating electrical machineries. It is clear that in these machines energy should be used efficiently. In this dissertation the aim is to improve the design process of high-speed electrical machines especially from the mechanical engineering perspective in order to achieve more reliable and efficient machines. The design process of high-speed machines is challenging due to high demands and several interactions between different engineering disciplines such as mechanical, electrical and energy engineering. A multidisciplinary design flow chart for a specific type of high-speed machine in which computer simulation is utilized is proposed. In addition to utilizing simulation parallel with the design process, two simulation studies are presented. The first is used to find the limits of two ball bearing models. The second is used to study the improvement of machine load capacity in a compressor application to exceed the limits of current machinery. The proposed flow chart and simulation studies show clearly that improvements in the high-speed machinery design process can be achieved. Engineers designing in high-speed machines can utilize the flow chart and simulation results as a guideline during the design phase to achieve more reliable and efficient machines that use energy efficiently in required different operation conditions.

Finding the Open Spaces in Closed Systems: An Exploration of Critical Pedagogy with a Social Justice Directive in an Ontario Secondary School Classroom

This study examines the first experience of students, teachers, and an administrator in implementing a teacher-designed Leadership in Social Justice Program at a large urban Ontario secondary school. The program aimed to infuse a Freirean concept of critical pedagogical praxis (Freire, 1970/1993) in a grade 12 integrated educational experience with a social justice directive. Data were collected through two questionnaires and eight in-depth interviews. The data identified three areas of awareness that described ways in which student participants were impacted most profoundly (a) developing self-awareness, (b) understanding a new educational paradigm, and (c) finding a place in the world. The study found that the program was successful in highlighting the possibility for more meaningful education and engaged many students deeply; however, its success was limited by the lead teacher’s failure to fully grasp and implement tenets of Freirean critical pedagogy that involved the role of the teacher in pedagogical processes.

Systematic analysis of protein complexes involved in the human RNA polymerase II machinery

La transcription, la maturation d’ARN, et le remodelage de la chromatine sont tous des processus centraux dans l'interprétation de l'information contenue dans l’ADN. Bien que beaucoup de complexes de protéines formant la machinerie cellulaire de transcription aient été étudiés, plusieurs restent encore à identifier et caractériser. En utilisant une approche protéomique, notre laboratoire a purifié plusieurs composantes de la machinerie de transcription de l’ARNPII humaine par double chromatographie d’affinité "TAP". Cette procédure permet l'isolement de complexes protéiques comme ils existent vraisemblablement in vivo dans les cellules mammifères, et l'identification de partenaires d'interactions par spectrométrie de masse. Les interactions protéiques qui sont validées bioinformatiquement, sont choisies et utilisées pour cartographier un réseau connectant plusieurs composantes de la machinerie transcriptionnelle. En appliquant cette procédure, notre laboratoire a identifié, pour la première fois, un groupe de protéines, qui interagit physiquement et fonctionnellement avec l’ARNPII humaine. Les propriétés de ces protéines suggèrent un rôle dans l'assemblage de complexes à plusieurs sous-unités, comme les protéines d'échafaudage et chaperonnes. L'objectif de mon projet était de continuer la caractérisation du réseau de complexes protéiques impliquant les facteurs de transcription. Huit nouveaux partenaires de l’ARNPII (PIH1D1, GPN3, WDR92, PFDN2, KIAA0406, PDRG1, CCT4 et CCT5) ont été purifiés par la méthode TAP, et la spectrométrie de masse a permis d’identifier de nouvelles interactions. Au cours des années, l’analyse par notre laboratoire des mécanismes de la transcription a contribué à apporter de nouvelles connaissances et à mieux comprendre son fonctionnement. Cette connaissance est essentielle au développement de médicaments qui cibleront les mécanismes de la transcription.

La sous-traitance des données du patient au regard de la Directive 95/46

La gestion des données du patient occupe une place significative dans la pratique de l’art de guérir. Il arrive fréquemment que des personnes participent à la production ou à la gestion des données du patient alors que, praticiens de la santé ou non, elles ne travaillent pas sous l’autorité ou la direction du praticien ou de l’équipe en charge du patient. Au regard de la directive 95/46/CE relative à la protection des personnes physiques à l’égard du traitement des données à caractère personnel, ces tiers revêtent la qualité de sous–traitant lorsqu’ils traitent des données pour compte du responsable du traitement de données. Ce dernier doit choisir un sous–traitant qui apporte des garanties suffisantes au regard des mesures de sécurité technique et d’organisation relatives aux traitements à effectuer, et il doit veiller au respect de ces mesures. L’existence de labels de sécurité pourrait faciliter le choix du sous–traitant. S’agissant de données très sensibles comme les données génétiques, il serait opportun d’envisager un contrôle préalable par l’autorité de contrôle ou par un détaché à la protection des données. Il demeure alors à déterminer le véritable responsable du traitement des données du patient, ce qui dépend fortement du poids socialement reconnu et attribué aux différents acteurs de la relation thérapeutique.