Invariants de matrius Hadamard en MAGMA

L'objectiu d'aquest projecte ha estat generalitzar i integrar la funcionalitat de dos projectes anteriors que ampliaven el tractament que oferia el Magma respecte a les matrius de Hadamard. Hem implementat funcions genèriques que permeten construir noves matrius Hadamard de qualsevol mida per a cada rang i dimensió de nucli, i així ampliar la seva base de dades. També hem optimitzat la funció que calcula el nucli, i hem desenvolupat funcions que calculen la invariant Symmetric Hamming Distance Enumerator (SH-DE) proposada per Kai-Tai Fang i Gennian Gei que és més sensible per a la detecció de la no equivalència de les matrius Hadamard.

Códigos binarios no lineales en MAGMA

La finalitat d'aquest projecte és aconseguir representar codis binaris no lineals de manera eficient en un ordinador. Per fer-ho, hem desenvolupat funcions per representar un codi binari a partir del super dual. Hem millorat la funció de càlcul del kernel d'un codi binari, implementada en projectes d'anys anteriors. També hem desenvolupat un paquet software per l'intèrpret MAGMA. Aquest paquet ens proveeix d'eines per al tractament de codis binaris no necessàriament lineals.

Codis Z2Z4-additius en Magma

En aquest projecte es presenta el desenvolupament d'un paquet d'aplicacions en l'entorn de programació matemàtica Magma, per al tractament dels codis anomenats Z2Z4-additius. Els codis Z2Z4-additius permeten representar alguns codis binaris, com a codis lineals en l'espai dels codis Z2Z4-additius. Aquest fet permetrà l'estudi de tota una sèrie de codis binaris no lineals que fins ara eren intractables.

The Early Cretaceous San Juan Plutonic Suite, Ecuador: A magma chamber in an oceanic plateau ?

Sections through an oceanic plateau are preserved in tectonic slices in the Western Cordillera of Ecuador (South America). The San Juan section is a sequence of mafic-ultramafic cumulates. To establish that these plutonic rocks formed in an oceanic plateau setting, we have developed criteria that discriminate intrusions of oceanic plateaus from those of other tectonic settings. The mineralogy and crystallization sequence of the cumulates are similar to those of intra-plate magmas. Clinopyroxene predominates throughout, and orthopyroxene is only a minor component. Rocks of intermediate composition are absent, and hornblende is restricted to the uppermost massive gabbros within the sequence. The ultramafic cumulates are very depleted in light rare-earth elements (LREE), whereas the gabbros have flat or slightly enriched LREE patterns. The composition of the basaltic liquid in equilibrium with the peridotite, calculated using olivine compositions and REE contents of clinopyroxene, contains between 16% and 8% MgO and has a flat REE pattern. This melt is geochemically similar to other accreted oceanic plateau basalts, isotropic gabbros, and differentiated sills in western Ecuador. The Ecuadorian intrusive and extrusive rocks have a narrow range of epsilonNd(i) (+8 to +5) and have a rather large range of Pb isotopic ratios. Pb isotope systematics of the San Juan plutonic rocks and mineral separates lie along a mixing line between the depleted mantle (DMM) and the enriched-plume end members. This suggests that the Ecuadorian plutonic rocks generated from the mixing of two mantle sources, a depleted mid-oceanic ridge basalt (MORB) source and an enriched one. The latter is characterized by high (Pb-207/Pb-204)(i) ratios and could reflect a contamination by recycled either lower continental crust or oceanic pelagic sediments and (or) altered oceanic crust (enriched mantle type I, EMI). These data suggest that the San Juan sequence represents the plutonic components of an Early Cretaceous oceanic plateau, which accreted in the Late Cretaceous to the Ecuadorian margin.

Codis no lineals en MAGMA: construcció de codis perfectes

La finalitat d'aquest projecte és aconseguir construir codis binaris perfectes no lineals de manera eficient. Per a fer-ho, hem desenvolupat un paquet de software per a l'intèrpret MAGMA que conté funcions per a la construcció de codis perfectes, càlcul d'invariants de codis i altres funcions complementàries per a fer càlculs sobre les paraules d'un codi.

Codis no lineals en Magma: noves construccions

L'objectiu principal d'aquest projecte és ampliar la llibreria BinaryCodes, iniciada al 2007, que ens permet construir i manipular codis binaris lineals i no lineals. Per aquest motiu, s'han desenvolupat una sèrie de funcions, amb els seus corresponents tests i exemples, en l'entorn de programació matemàtica Magma. Aquestes funcions consisteixen bàsicament en la construcció de nous codis a partir d'altres ja existents.

Insights into shallow magmatic processes in large silicic magma bodies: the trace element record in the Fish Canyon magma body, Colorado

Highly evolved rhyolite glass plus near-solidus mineral assemblages in voluminous, dacitic, crystal-rich ignimbrites provide an opportunity to evaluate the late magmatic evolution of granodiorite batholiths. This study reports laser-ablation ICP-MS analyses of trace element concentrations in feldspars, hornblende, biotite, titanite, zircon, magnetite, and interstitial glass of the crystal-rich Fish Canyon Tuff. The high-silica rhyolite glass is characterized by relatively high concentrations of feldspar-compatible elements (e.g., 100 ppm Sr and 500 ppm Ba) and low concentrations of Y (< 7 ppm) and HREE (&SIM; 1 ppm Yb), hence high LREE/HREE (Ce/Yb > 40) compared to many well-studied high-silica rhyolite glasses and whole-rock compositions. Most minerals record some trace element heterogeneities, with, in particular, one large hornblende phenocryst showing four- to six-fold core-to-rim increases in Sr and Ba coupled with a decrease in Sc. The depletions of Y and HREE in the Fish Canyon glass relative to the whole-rock composition (concentrations in glass &SIM; 30% of those in whole rocks) reflect late crystallization of phases wherein these elements were compatible. As garnet is not stable at the low-P conditions at which the Fish Canyon magma crystallized, we show that a combination of modally abundant hornblende (&SIM; 4%) + titanite (&SIM; 0.5-1%) and the highly polymerized nature of the rhyolitic liquid led to Y and HREE depletions in melt. Relatively high Sr and Ba contents in glass and rimward Sr and Ba increases in euhedral, concentrically zoned hornblende suggest partial feldspar dissolution and a late release of these elements to the melt as hornblende was crystallizing, in agreement with textural evidence for feldspar (and quartz) resorption. Both observations are consistent with thermal rejuvenation of the magma body prior to eruption, during which the proportion of melt increased via feldspar and quartz dissolution, even as hydrous and accessory phases were crystallizing. Sr/Y in Fish Canyon glass (13-18) is lower than the typical ``adakitic'' value (> 40), confirming that high Sr/Y is a reliable indicator of high-pressure magma generation and/or differentiation wherein garnet is implicated.

Magma generation at the easternmost section of the Hellenic arc: Hf, Nd, Pb and Sr isotope geochemistry of Nisyros and Yali volcanoes (Greece)

Geochemical and petrographical studies of lavas and ignimbrites from the Quaternary Nisyros-Yali volcanic system in the easternmost part of the Hellenic arc (Greece) reveal insight into magma generating processes. A compositional gap between 61 and 68 wt.% SiO2 is recognized that coincides with the stratigraphic distinction between pre-caldera and postcaldera volcanic units. Trace element systematics support the subdivision of Nisyros and Yali volcanic units into two distinct suites of rocks. The variation of Nd and Hf present day isotope data and the fact that they are distinct from the isotope compositions of MORB rule out an origin by pure differentiation and require assimilation of a crustal component. Lead isotope ratios of Nisyros and Yali volcanic rocks support mixing of mantle material with a lower crust equivalent. However, Sr-87/Sr-86 ratios of 0.7036-0.7048 are incompatible with a simple binary mixing scenario and give low depleted mantle extraction ages (< 0.1 Ga), in contrast with Pb model ages of 0.3 Ga and Hf and Nd model ages of ca. 0.8 Ga. The budget of fluid-mobile elements Sr and Pb is likely to be dominated by abundant hydrous fluids characterised by mantle-like Sr isotope ratios. Late stage fluids probably were enriched in CO2, needed to explain the high Th concentrations. The occurrence of hydrated minerals (e.g., amphibole) in the first post-caldera unit with the lowermost Sr-87/Sr-86 ratio of 0.7036 +/- 2 can be interpreted as the result of the increased water activity in the source. The presence of two different plagioclase phenocryst generations in the first lava subsequent to the caldera-causing event is indicative for a longer storage time of this magma at a shallower level. A model capable of explaining these observations involves three evolutionary stages. First stage, assimilation of lower crustal material by a primitive magma of mantle origin (as modelled by Nd-Hf isotope systematics). This stage ended by an interruption in replenishment that led to an increase of crystallization and, hence, an increase in viscosity, suppressing eruption. During this time gap, differentiation by fractional crystallization led to enrichment of incompatible species, especially aqueous fluids, to silica depolymerisation and to a decrease in viscosity, finally enabling eruption again in the third stage. (c) 2005 Elsevier B.V. All rights reserved.

Contrasting magma types and timing of intrusion in the Permian layered mafic complex of Mont Collon (Western Alps, Valais, Switzerland): evidence from U/Pb zircon and 40Ar/39Ar amphibole dating

We have selected and dated three contrasting rock-types representative of the magmatic activity within the Permian layered mafic complex of Mont Collon, Austroalpine Dent Blanche nappe, Western Alps. A pegmatitic gabbro associated to the main cumulus sequence yields a concordant U/Pb zircon age of 284.2 +/- 0.6 Ma, whereas a pegmatitic granite dike crosscutting the latter yields a concordant age of 282.9 +/- 0.6 Ma. A Fe-Ti-rich ultrabasic lamprophyre, crosscutting all other lithologies of the complex, yields an 40Ar/39Ar plateau age of 260.2 +/- 0.7 Ma on a kaersutite concentrate. All ages are interpreted as magmatic. Sub-contemporaneous felsic dikes within the Mont Collon complex are ascribed to anatectic back-veining from the country-rock, related to the emplacement of the main gabbroic body in the continental crust, which is in accordance with new isotopic data. The lamprophyres have isotopic compositions typical of a depleted mantle, in contrast to those of the cumulate gabbros, close to values of the Bulk Silicate Earth. This indicates either contrasting sources for the two magma pulses - the subcontinental lithospheric mantle for the gabbros and the underlying asthenosphere for the lamprophyres - or a single depleted lithospheric source with variable degrees of crustal contamination of the gabbroic melts during their emplacement in the continental crust. The Mont Collon complex belongs to a series of Early Permian mafic massifs, which emplaced in a short time span about 285-280 Ma ago, in a limited sector of the post-Variscan continental crust now corresponding to the Austroalpine/ Southern Alpine domains and Corsica. This magmatic activity was controlled in space and time by crustal-scale transtensional shear zones.

Soil CO2 flux: a method comparison of closed static chambers in a sugarcane field

A large variety of techniques have been used to measure soil CO2 released from the soil surface, and much of the variability observed between locations must be attributed to the different methods used by the investigators. Therefore, a minimum protocol of measurement procedures should be established. The objectives of this study were (a) to compare different absorption areas, concentrations and volumes of the alkali trapping solution used in closed static chambers (CSC), and (b) to compare both, the optimized alkali trapping solution and the soda-lime trapping using CSC to measure soil respiration in sugarcane areas. Three CO2 absorption areas were evaluated (7; 15 and 20 % of the soil emission area or chamber); two volumes of NaOH (40 and 80 mL) at three concentrations (0.1, 0.25 and 0.5 mol L-1). Three different types of alkaline traps were tested: (a), 80 mL of 0.5 mol L-1 NaOH in glass containers, absorption area 15 % (V0.5); (b) 40 mL of 2 mol L-1 NaOH retained in a sponge, absorption area 80 % (S2) and (c) 40 g soda lime, absorption area 15 % (SL). NaOH concentrations of 0.5 mol L-1 or lower underestimated the soil CO2-C flux or CO2 flux. The lower limit of the alkali trap absorption area should be a minimum of 20 % of the area covered by the chamber. The 2 mol L-1 NaOH solution trap (S2) was the most efficient (highest accuracy and highest CO2 fluxes) in measuring soil respiration.

Computer-aided procedure for optimization of layer thickness uniformity in thermal evaporation physical vapor deposition chambers for lens coating

A computer-aided method to improve the thickness uniformity attainable when coating multiple substrates inside a thermal evaporation physical vapor deposition unit is presented. The study is developed for the classical spherical (dome-shaped) calotte and also for a plane sector reversible holder setup. This second arrangement is very useful for coating both sides of the substrate, such as antireflection multilayers on lenses. The design of static correcting shutters for both kinds of configurations is also discussed. Some results of using the method are presented as an illustration.

The role of magma rheology during emplacement of the Listino Suite, Adamello Massif, Italy

This thesis studies individual and contextual antecedents of anti-immigrant attitudes by drawing on intergroup threat and contact, social representation, and value theories. As an alternative to previous multilevel research on the topic, it aims to articulate levels of analysis by putting forward a Person x Context Interaction approach. Moreover, rather than focussing exclusively on the impact of a large immigrant proportion, by introducing ideological climates, it develops and examines the normative societal context in which individuals are embedded. The studies largely draw on cross-sectional survey data across Swiss municipalities (Studies 1 to 3) and European countries (Study 4), but are complemented by elite discourses (Study 5) and online collected survey data (Study 6). Study 1 distinguishes between valued and devalued immigrants, thereby shedding light on the impact of immigrant proportion on intergroup contact and threat. Study 2 focuses on the link between immigrant proportion and attitudes towards the Muslim veil by examining its joint impact with conservative ideologies on the individual and municipality level. Aiming to explain threat related to immigrants, the interplay between immigrant proportion and ideological climates is studied across Swiss municipalities (Study 3) and European countries (Study 4). In addition, by adopting a Person x Context Interaction approach, it is investigated whether a context galvanizes individuals already prone to viewing immigrants as threatening, or mobilizes those generally least likely to express prejudice. Finally, to better understand the role political elites play in fuelling ideological climates, the official discourses on the 2011 England riots are analysed (Study 5). With online survey data collected during the riots, it is then shown that once endorsed, threat-eliciting climates are likely to mobilize negative ethnic diversity attitudes in the larger population (Study 6). Overall, this thesis proposes an integrative approach to studying anti-immigrant attitudes and discusses theoretical and methodological implications. - La présente thèse se penche sur les antécédents individuels et contextuels des attitudes négatives envers les immigré e s, en combinant les théories de la menace intergroupe, du contact, des représentations sociales et des valeurs. Elle a plus précisément pour but d'articuler différents niveaux d'analyse à travers une approche insistant sur les interactions entre Individu et Contexte. Ce faisant, elle propose une alternative aux recherches précédentes sur le thème, basées sur une perspective multiniveau plus « classique ». Au lieu de se pencher uniquement sur l'impact de la présence de populations immigrées dans un lieu donné, la recherche réalisée a par ailleurs développé et étudié le concept de climat idéologique, à savoir le contexte normatif au sein duquel les individus sont plongés au quotidien. Les études composant cette thèse se basent essentiellement sur des données d'enquête de grande échelle, récoltées dans diverses municipalités Suisses (Etudes 1 à 3) ou divers pays Européens (Etude 4). Elles sont complétées par l'analyse de discours politiques (Etude 5) et de données récoltées sur internet (Etude 6). Distinguant entre immigré-e'S valorisé-e s et dévalorisé-e-s, l'Etude 1 a eu pour but de mettre en lumière l'impact de la présence d'immigré e s sur le contact et la menace intergroupes. L'Etude 2 a, quant à elle, examiné si la présence d'immigré e s interagit avec les idéologies conservatrices, tant au niveau individuel que municipal, pour expliquer les attitudes envers le voile. Dans le même ordre idée, les études suivantes ont mis en exergue les effets conjoints de la présence d'immigré-e s et du climat idéologique au niveau des municipalités suisses (Etude 3) ou des pays Européens (Etude 4). En s'intéressant aux interactions entre Individu et Contexte, ces études ont en particulier cherché à observer dans quelle mesure ce dernier pouvait galvaniser les attitudes de personnes qui avaient déjà tendance à percevoir les immigré e s comme une menace ou, au contraire, mobiliser des individus desquels on n'attendrait pas de telles attitudes. Pour finir, les dernières études ont eu pour but de mettre en lumière la manière dont les élites politiques alimentent les climats idéologiques. Dans ce but, l'Etude 5 a analysé les discours officiels donnés pendant les émeutes qui ont secoué Londres en 2011, alors que l'Etude 6 a démontré comment le fait d'être en accord avec le message de menace véhiculé par ces discours avait poussé des individus égalitaires à exprimer des attitudes négatives envers la diversité ethnique. Dans l'ensemble, la présente thèse propose donc une approche intégrative d'étudier les attitudes négatives envers les immigré-e-s, et en discute les implications théoriques et méthodologiques.

Uncertainty evaluation in activity measurements using ionization chambers

Pressurized re-entrant (or 4 pi) ionization chambers (ICs) connected to current-measuring electronics are used for activity measurements of photon emitting radionuclides and some beta emitters in the fields of metrology and nuclear medicine. As a secondary method, these instruments need to be calibrated with appropriate activity standards from primary or direct standardization. The use of these instruments over 50 years has been well described in numerous publications, such as the Monographie BIPM-4 and the special issue of Metrologia on radionuclide metrology (Ratel 2007 Metrologia 44 S7-16, Schrader1997 Activity Measurements With Ionization Chambers (Monographie BIPM-4) Schrader 2007 Metrologia 44 S53-66, Cox et al 2007 Measurement Modelling of the International Reference System (SIR) for Gamma-Emitting Radionuclides (Monographie BIPM-7)). The present work describes the principles of activity measurements, calibrations, and impurity corrections using pressurized ionization chambers in the first part and the uncertainty analysis illustrated with example uncertainty budgets from routine source-calibration as well as from an international reference system (SIR) measurement in the second part.

Trigger and data link system for CMS Resistive Plate Chambers at the LHC accelerator

The purpose of the work was to realize a high-speed digital data transfer system for RPC muon chambers in the CMS experiment on CERN’s new LHC accelerator. This large scale system took many years and many stages of prototyping to develop, and required the participation of tens of people. The system interfaces to Frontend Boards (FEB) at the 200,000-channel detector and to the trigger and readout electronics in the control room of the experiment. The distance between these two is about 80 metres and the speed required for the optic links was pushing the limits of available technology when the project was started. Here, as in many other aspects of the design, it was assumed that the features of readily available commercial components would develop in the course of the design work, just as they did. By choosing a high speed it was possible to multiplex the data from some the chambers into the same fibres to reduce the number of links needed. Further reduction was achieved by employing zero suppression and data compression, and a total of only 660 optical links were needed. Another requirement, which conflicted somewhat with choosing the components a late as possible was that the design needed to be radiation tolerant to an ionizing dose of 100 Gy and to a have a moderate tolerance to Single Event Effects (SEEs). This required some radiation test campaigns, and eventually led to ASICs being chosen for some of the critical parts. The system was made to be as reconfigurable as possible. The reconfiguration needs to be done from a distance as the electronics is not accessible except for some short and rare service breaks once the accelerator starts running. Therefore reconfigurable logic is extensively used, and the firmware development for the FPGAs constituted a sizable part of the work. Some special techniques needed to be used there too, to achieve the required radiation tolerance. The system has been demonstrated to work in several laboratory and beam tests, and now we are waiting to see it in action when the LHC will start running in the autumn 2008.