Indicadores de performance na cadeia de suprimentos

Esta dissertação procura explorar dentro do conceito de Cadeia de Suprimentos, como sendo um conjunto de atividades relacionadas à gestão do fluxo de materiais e de Logística Empresarial; não só a importância dos processos correlacionados tais como: planejamento, implementação e controle do fluxo de materiais, mas principalmente, a importância de medir e monitorar o desempenho destes processos, como forma de manter a empresa competitiva e atualizada em suas práticas. Expor alguns conceitos sobre indicadores de performance, suas funções, implicações e aplicabilidades, a fim de que não sejam mal interpretados ou mal utilizados uma vez que, da correta interpretação e utilização, depende a superioridade das empresas. Para muitas empresas hoje, o diferencial competitivo está no quanto o processo de logística é bem administrado. Para alcançar excelência em logística deve-se assegurar que os processos-chave correlacionados estejam alinhados com a estratégia central do negócio, e que sejam constantemente medidos contra objetivos de performance pré-definidos. Podendo ainda, estes objetivos, serem estabelecidos conjuntamente a cada um de seus parceiros e integrantes da cadeia (clientes / fornecedores / sub-contratados) a fim de criar-se um entendimento comum de expectativas e resultados.

Três ensaios sobre política monetária e crédito

In the first essay, "Determinants of Credit Expansion in Brazil", analyzes the determinants of credit using an extensive bank level panel dataset. Brazilian economy has experienced a major boost in leverage in the first decade of 2000 as a result of a set factors ranging from macroeconomic stability to the abundant liquidity in international financial markets before 2008 and a set of deliberate decisions taken by President Lula's to expand credit, boost consumption and gain political support from the lower social strata. As relevant conclusions to our investigation we verify that: credit expansion relied on the reduction of the monetary policy rate, international financial markets are an important source of funds, payroll-guaranteed credit and investment grade status affected positively credit supply. We were not able to confirm the importance of financial inclusion efforts. The importance of financial sector sanity indicators of credit conditions cannot be underestimated. These results raise questions over the sustainability of this expansion process and financial stability in the future. The second essay, “Public Credit, Monetary Policy and Financial Stability”, discusses the role of public credit. The supply of public credit in Brazil has successfully served to relaunch the economy after the Lehman-Brothers demise. It was later transformed into a driver for economic growth as well as a regulation device to force private banks to reduce interest rates. We argue that the use of public funds to finance economic growth has three important drawbacks: it generates inflation, induces higher loan rates and may induce financial instability. An additional effect is the prevention of market credit solutions. This study contributes to the understanding of the costs and benefits of credit as a fiscal policy tool. The third essay, “Bayesian Forecasting of Interest Rates: Do Priors Matter?”, discusses the choice of priors when forecasting short-term interest rates. Central Banks that commit to an Inflation Target monetary regime are bound to respond to inflation expectation spikes and product hiatus widening in a clear and transparent way by abiding to a Taylor rule. There are various reports of central banks being more responsive to inflationary than to deflationary shocks rendering the monetary policy response to be indeed non-linear. Besides that there is no guarantee that coefficients remain stable during time. Central Banks may switch to a dual target regime to consider deviations from inflation and the output gap. The estimation of a Taylor rule may therefore have to consider a non-linear model with time varying parameters. This paper uses Bayesian forecasting methods to predict short-term interest rates. We take two different approaches: from a theoretic perspective we focus on an augmented version of the Taylor rule and include the Real Exchange Rate, the Credit-to-GDP and the Net Public Debt-to-GDP ratios. We also take an ”atheoretic” approach based on the Expectations Theory of the Term Structure to model short-term interest. The selection of priors is particularly relevant for predictive accuracy yet, ideally, forecasting models should require as little a priori expert insight as possible. We present recent developments in prior selection, in particular we propose the use of hierarchical hyper-g priors for better forecasting in a framework that can be easily extended to other key macroeconomic indicators.

Reflexões sobre a utilização do balanced scorecard na gestão da cadeia de suprimentos: um estudo de caso na unidade operacional de uma grande distribuidora de combustíveis

As organizações contemporâneas apresentam elevado grau de complexidade. A extensa cadeia de processos deve ser gerenciada de forma integrada e requer descentralização da tomada de decisões para assegurar respostas ágeis aos estímulos do ambiente competitivo. Este contexto demanda a criação de ferramentas de gestão que apoiem os gestores no atingimento dos objetivos estratégicos globais das empresas, como o modelo de referência analisado neste trabalho, que alia as métricas de gestão da cadeia de suprimentos com o conceito do Balanced Scorecard. Este trabalho objetivou, por um lado, avaliar a atual arquitetura de indicadores de desempenho da unidade operacional (UO) de uma grande distribuidora de combustíveis à luz deste modelo de referência e, por outro, testar o modelo de referência através do estudo de caso quanto à sua universalidade de aplicação por diferentes empresas. Dentre os resultados obtidos, destacam-se: a arquitetura de indicadores atual da UO está desequilibrada nas dimensões do BSC – comparada à dimensão financeira que apresenta 7 indicadores, a dimensão clientes apresenta somente 2 indicadores; identificou-se uma lacuna de 50% na relação de indicadores de desempenho da UO quando a confrontamos com o modelo de referência; para as lacunas identificadas, desenvolveu-se um plano de ação para sua incorporação à arquitetura da UO; constatou-se que 24% das métricas do modelo de referência não se aplicam à realidade da UO e; o modelo de referência não abarca itens relevantes como treinamento, engajamento e Saúde, Meio Ambiente e Segurança (SMS), primordial para a realidade da empresa, que acompanha atualmente 6 indicadores de SMS. Verificou-se, também, que o uso de um modelo de referência genérico não é o mais adequado por causa das complexidades intrínsecas de cada uma das organizações. Entretanto, o mesmo pode ser usado como um guia para verificação de suficiência dos indicadores pré-selecionados por uma determinada empresa porque indica lacunas que podem não ser percebidas no processo de seleção.

Análise das perdas na produção contínua de extração de óleo de soja: estudo de caso no método de extração por solvente

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Manutenção planejada para a redução de falhas e defeitos que ocorrem em equipamentos de uma empresa do setor de energia elétrica

A preocupação com as rotinas de manutenção normalmente está relacionada à falha de um processo ou equipamento (manutenção corretiva). O controle sistemático da manutenção e operação dos ativos é considerado um alto ponto de redução de custos e aumento da disponibilidade operacional para o planejamento estratégico. Como resultado, tem-se na área de manutenção, uma grande quantidade de métodos, software, modelos e ferramentas de gestão disponíveis. Dentre eles, dois métodos se destacam: o RCM (Reliability Centered Maintenance ou Manutenção Centrada em Confiabilidade), de origem norte-americana, e o TPM (Total Productive Maintenance ou Manutenção Produtiva Total), de origem japonesa. Desta forma, o objetivo principal deste trabalho é estudar a sistemática do planejamento estratégico e da manutenção planejada para a redução de falhas e defeitos que ocorrem em equipamentos, a partir das metodologias propostas pelos principais autores da área de planejamento estratégico e manutenção, com o intuito de propor melhorias na utilização desta ferramenta. Com base no referencial teórico (Amendola, Berndt, Coimbra, Certo, Copser, Nakajima, Mendes, Moreira, Moubray, Oliveira, Kaplan entre outros) estudado, foi possível iniciar a compreensão do planejamento da gestão da manutenção planejada da Usina Hidrelétrica de Tucuruí e suas práticas de desempenho em relação às práticas de referência e dos principais indicadores estratégicos destacados por esses autores. Esta pesquisa possibilitou avaliar que o atual procedimento adotado em Tucuruí está alinhado com todos os pensadores estudados, bastando apenas à melhor disseminação de todos os conceitos entre todos os níveis hieraquicos de planejamento e execução.

Indicadores-chave de desempenho e a gestão integrada da mineração

The exceptional advance of information technology and computer application to the mineral sector has allowed the automation of several processes of the mineral value chain. ERP systems (Enterprise Resource Planning) provided the platform for the efficient integration of all support activities of the mineral value chain. Despite all advances gathered with the application of computers, it was not possible to date, to effectively integrate the primary activities of the mineral value chain. The main reason for that are the uncertainties present in the productive process, which are intrinsic to the business, and the difficulty to quantify and qualify the benefits obtained with this integration due to the lack of a clear definition of the key performance indicators (KPIs). This work presents an analysis of the ERP systems application in Brazilian mining, identifies the KPIs of some of the most important Brazilian mining companies, and discusses the importance of mapping and measuring these indicators for the effective. management of the mining business.

Sviluppo di metodologie innovative di supporto decisionale alla progettazione basate su indicatori di prestazione

Il progetto di ricerca è finalizzato allo sviluppo di una metodologia innovativa di supporto decisionale nel processo di selezione tra alternative progettuali, basata su indicatori di prestazione. In particolare il lavoro si è focalizzato sulla definizione d’indicatori atti a supportare la decisione negli interventi di sbottigliamento di un impianto di processo. Sono stati sviluppati due indicatori, “bottleneck indicators”, che permettono di valutare la reale necessità dello sbottigliamento, individuando le cause che impediscono la produzione e lo sfruttamento delle apparecchiature. Questi sono stati validati attraverso l’applicazione all’analisi di un intervento su un impianto esistente e verificando che lo sfruttamento delle apparecchiature fosse correttamente individuato. Definita la necessità dell’intervento di sbottigliamento, è stato affrontato il problema della selezione tra alternative di processo possibili per realizzarlo. È stato applicato alla scelta un metodo basato su indicatori di sostenibilità che consente di confrontare le alternative considerando non solo il ritorno economico degli investimenti ma anche gli impatti su ambiente e sicurezza, e che è stato ulteriormente sviluppato in questa tesi. Sono stati definiti due indicatori, “area hazard indicators”, relativi alle emissioni fuggitive, per integrare questi aspetti nell’analisi della sostenibilità delle alternative. Per migliorare l’accuratezza nella quantificazione degli impatti è stato sviluppato un nuovo modello previsionale atto alla stima delle emissioni fuggitive di un impianto, basato unicamente sui dati disponibili in fase progettuale, che tiene conto delle tipologie di sorgenti emettitrici, dei loro meccanismi di perdita e della manutenzione. Validato mediante il confronto con dati sperimentali di un impianto produttivo, si è dimostrato che tale metodo è indispensabile per un corretto confronto delle alternative poiché i modelli esistenti sovrastimano eccessivamente le emissioni reali. Infine applicando gli indicatori ad un impianto esistente si è dimostrato che sono fondamentali per semplificare il processo decisionale, fornendo chiare e precise indicazioni impiegando un numero limitato di informazioni per ricavarle.

Investigating strategies and indicators for sustainable campus: Comparison and synergies between University of Bologna and Delft University of Technology

Sustainable development is one of the biggest challenges of the twenty fist-century. Various university has begun the debate about the content of this concept and the ways in which to integrate it into their policy, organization and activities. Universities have a special responsibility to take over a leading position by demonstrating best practices that sustain and educate a sustainable society. For that reason universities have the opportunity to create the culture of sustainability for today’s student, and to set their expectations for how the world should be. This thesis aim at analyzing how Delft University of Technology and University of Bologna face the challenge of becoming a sustainable campus. In this context, both universities have been studied and analyzed following the International Sustainable Campus Network (ISCN) methodology that provides a common framework to formalize commitments and goals at campus level. In particular this work has been aimed to highlight which key performance indicators are essential to reach sustainability as a consequence the following aspects has been taken into consideration: energy use, water use, solid waste and recycling, carbon emission. Subsequently, in order to provide a better understanding of the current state of sustainability on University of Bologna and Delft University of Technology, and potential strategies to achieve the stated objective, a SWOT Analysis has been undertaken. Strengths, weaknesses, opportunities and threats have been shown to understand how the two universities can implement a synergy to improve each other. In the direction of framing a “Sustainable SWOT” has been considered the model proposed by People and Planet, so it has been necessary to evaluate important matters as for instance policy, investment, management, education and engagement. Regarding this, it has been fundamental to involve the main sustainability coordinators of the two universities, this has been achieved through a brainstorming session. Partnerships are key to the achievement of sustainability. The creation of a bridge between two universities aims to join forces and to create a new generation of talent. As a result, people can become able to support universities in the exchange of information, ideas, and best practices for achieving sustainable campus operations and integrating sustainability in research and teaching. For this purpose the project "SUCCESS" has been presented, the project aims to create an interactive European campus network that can be considered a strategic key player for sustainable campus innovation in Europe. Specifically, the main key performance indicators have been analyzed and the importance they have for the two universities and their strategic impact have been highlighted. For this reason, a survey was conducted with people who play crucial roles for sustainability within the two universities and they were asked to evaluate the KPIs of the project. This assessment has been relevant because has represented the foundation to develop a strategy to create a true collaboration.

Efficient management of available technologies. Aplication to mining operations for industry supplies

Nowadays, processing Industry Sector is going through a series of changes, including right management and reduction of environmental affections. Any productive process which looks for sustainable management is incomplete if Cycle of Life of mineral resources sustainability is not taken into account. Raw materials for manufacturing are provided by mineral resources extraction processes, such as copper, aluminum, iron, gold, silver, silicon, titanium? Those elements are necessary for Mankind development and are obtained from the Earth through mineral extractive processes. Mineral extraction processes are operations which must take care about the environmental consequences. Extraction of huge volumes of rock for their transformation into raw materials for industry must be optimized to reduce ecological cost of the final product as l was possible. Reducing the ecological balance on a global scale has no sense to design an efficient manufacturing in secondary industry (transformation), if in first steps of the supply chain (extraction) impact exceeds the savings of resources in successive phases. Mining operations size suggests that it is an environmental aggressive activity, but precisely because of its great impact must be the first element to be considered. That idea implies that a new concept born: Reduce economical and environmental cost This work aims to make a reflection on the parameters that can be modified to reduce the energy cost of the process without an increasing in operational costs and always ensuring the same production capacity. That means minimize economic and environmental cost at same time. An efficient design of mining operation which has taken into account that idea does not implies an increasing of the operating cost. To get this objective is necessary to think in global operation view to make that all departments involved have common guidelines which make you think in the optimization of global energy costs. Sometimes a single operational cost must be increased to reduce global cost. This work makes a review through different design parameters of surface mining setting some key performance indicators (KPIs) which are estimated from an efficient point of view. Those KPIs can be included by HQE Policies as global indicators. The new concept developed is that a new criteria has to be applied in company policies: improve management, improving OPERATIONAL efficiency. That means, that is better to use current resources properly (machinery, equipment,?) than to replace them with new things but not used correctly. As a conclusion, through an efficient management of current technologies in each extractive operation an important reduction of the energy can be achieved looking at downstream in the process. That implies a lower energetic cost in the whole cycle of life in manufactured product.

A multidisciplinary reference framework to support innovative design, implementation and assessment of chronic care models

Hoy en día, por primera vez en la historia, la mayor parte de la población podrá vivir hasta los sesenta años y más (United Nations, 2015). Sin embargo, todavía existe poca evidencia que demuestre que las personas mayores, estén viviendo con mejor salud que sus padres, a la misma edad, ya que la mayoría de los problemas de salud en edades avanzadas están asociados a las enfermedades crónicas (WHO, 2015). Los sistemas sanitarios de los países desarrollados funcionan adecuadamente cuando se trata del cuidado de enfermedades agudas, pero no son lo suficientemente eficaces en la gestión de las enfermedades crónicas. Durante la última década, se han realizado esfuerzos para mejorar esta gestión, por medio de la utilización de estrategias de prevención y de reenfoque de la provisión de los servicios de atención para la salud (Kane et al. 2005). Según una revisión sistemática de modelos de cuidado de salud, comisionada por el sistema nacional de salud Británico, pocos modelos han conceptualizado cuáles son los componentes que hay que utilizar para proporcionar un cuidado crónico efectivo, y estos componentes no han sido suficientemente estructurados y articulados. Por lo tanto, no hay suficiente evidencia sobre el impacto real de cualquier modelo existente en la actualidad (Ham, 2006). Las innovaciones podrían ayudar a conseguir mejores diagnósticos, tratamientos y gestión de pacientes crónicos, así como a dar soporte a los profesionales y a los pacientes en el cuidado. Sin embargo, la forma en las que estas innovaciones se proporcionan no es lo suficientemente eficiente, efectiva y amigable para el usuario. Para mejorar esto, hace falta crear equipos de trabajo y estrategias multidisciplinares. En conclusión, hacen falta actividades que permitan conseguir que las innovaciones sean utilizadas en los sistemas de salud que quieren mejorar la gestión del cuidado crónico, para que sea posible: 1) traducir la “atención sanitaria basada en la evidencia” en “conocimiento factible”; 2) hacer frente a la complejidad de la atención sanitaria a través de una investigación multidisciplinaria; 3) identificar una aproximación sistemática para que se establezcan intervenciones innovadoras en el cuidado de salud. El marco de referencia desarrollado en este trabajo de investigación es un intento de aportar estas mejoras. Las siguientes hipótesis han sido propuestas: Hipótesis 1: es posible definir un proceso de traducción que convierta un modelo de cuidado crónico en una descripción estructurada de objetivos, requisitos e indicadores clave de rendimiento. Hipótesis 2: el proceso de traducción, si se ejecuta a través de elementos basados en la evidencia, multidisciplinares y de orientación económica, puede convertir un modelo de cuidado crónico en un marco descriptivo, que define el ciclo de vida de soluciones innovadoras para el cuidado de enfermedades crónicas. Hipótesis 3: es posible definir un método para evaluar procesos, resultados y capacidad de desarrollar habilidades, y asistir equipos multidisciplinares en la creación de soluciones innovadoras para el cuidado crónico. Hipótesis 4: es posible dar soporte al desarrollo de soluciones innovadoras para el cuidado crónico a través de un marco de referencia y conseguir efectos positivos, medidos en indicadores clave de rendimiento. Para verificar las hipótesis, se ha definido una aproximación metodológica compuesta de cuatro Fases, cada una asociada a una hipótesis. Antes de esto, se ha llevado a cabo una “Fase 0”, donde se han analizado los antecedentes sobre el problema (i.e. adopción sistemática de la innovación en el cuidado crónico) desde una perspectiva multi-dominio y multi-disciplinar. Durante la fase 1, se ha desarrollado un Proceso de Traducción del Conocimiento, elaborado a partir del JBI Joanna Briggs Institute (JBI) model of evidence-based healthcare (Pearson, 2005), y sobre el cual se han definido cuatro Bloques de Innovación. Estos bloques consisten en una descripción de elementos innovadores, definidos en la fase 0, que han sido añadidos a los cuatros elementos que componen el modelo JBI. El trabajo llevado a cabo en esta fase ha servido también para definir los materiales que el proceso de traducción tiene que ejecutar. La traducción que se ha llevado a cabo en la fase 2, y que traduce la mejor evidencia disponible de cuidado crónico en acción: resultado de este proceso de traducción es la parte descriptiva del marco de referencia, que consiste en una descripción de un modelo de cuidado crónico (se ha elegido el Chronic Care Model, Wagner, 1996) en términos de objetivos, especificaciones e indicadores clave de rendimiento y organizada en tres ciclos de innovación (diseño, implementación y evaluación). Este resultado ha permitido verificar la segunda hipótesis. Durante la fase 3, para demostrar la tercera hipótesis, se ha desarrollado un método-mixto de evaluación de equipos multidisciplinares que trabajan en innovaciones para el cuidado crónico. Este método se ha creado a partir del método mixto usado para la evaluación de equipo multidisciplinares translacionales (Wooden, 2013). El método creado añade una dimensión procedural al marco. El resultado de esta fase consiste, por lo tanto, en una primera versión del marco de referencia, lista para ser experimentada. En la fase 4, se ha validado el marco a través de un caso de estudio multinivel y con técnicas de observación-participante como método de recolección de datos. Como caso de estudio se han elegido las actividades de investigación que el grupo de investigación LifeStech ha desarrollado desde el 2008 para mejorar la gestión de la diabetes, actividades realizadas en un contexto internacional. Los resultados demuestran que el marco ha permitido mejorar las actividades de trabajo en distintos niveles: 1) la calidad y cantidad de las publicaciones; 2) se han conseguido dos contratos de investigación sobre diabetes: el primero es un proyecto de investigación aplicada, el segundo es un proyecto financiado para acelerar las innovaciones en el mercado; 3) a través de los indicadores claves de rendimiento propuestos en el marco, una prueba de concepto de un prototipo desarrollado en un proyecto de investigación ha sido transformada en una evaluación temprana de una intervención eHealth para el manejo de la diabetes, que ha sido recientemente incluida en Repositorio de prácticas innovadoras del Partenariado de Innovación Europeo en Envejecimiento saludable y activo. La verificación de las 4 hipótesis ha permitido demonstrar la hipótesis principal de este trabajo de investigación: es posible contribuir a crear un puente entre la atención sanitaria y la innovación y, por lo tanto, mejorar la manera en que el cuidado crónico sea procurado en los sistemas sanitarios. ABSTRACT Nowadays, for the first time in history, most people can expect to live into their sixties and beyond (United Nations, 2015). However, little evidence suggests that older people are experiencing better health than their parents, and most of the health problems of older age are linked to Chronic Diseases (WHO, 2015). The established health care systems in developed countries are well suited to the treatment of acute diseases but are mostly inadequate for dealing with CDs. Healthcare systems are challenging the burden of chronic diseases by putting more emphasis on the prevention of disease and by looking for new ways to reorient the provision of care (Kane et al., 2005). According to an evidence-based review commissioned by the British NHS Institute, few models have conceptualized effective components of care for CDs and these components have been not structured and articulated. “Consequently, there is limited evidence about the real impact of any of the existing models” (Ham, 2006). Innovations could support to achieve better diagnosis, treatment and management for patients across the continuum of care, by supporting health professionals and empowering patients to take responsibility. However, the way they are delivered is not sufficiently efficient, effective and consumer friendly. The improvement of innovation delivery, involves the creation of multidisciplinary research teams and taskforces, rather than just working teams. There are several actions to improve the adoption of innovations from healthcare systems that are tackling the epidemics of CDs: 1) Translate Evidence-Based Healthcare (EBH) into actionable knowledge; 2) Face the complexity of healthcare through multidisciplinary research; 3) Identify a systematic approach to support effective implementation of healthcare interventions through innovation. The framework proposed in this research work is an attempt to provide these improvements. The following hypotheses have been drafted: Hypothesis 1: it is possible to define a translation process to convert a model of chronic care into a structured description of goals, requirements and key performance indicators. Hypothesis 2: a translation process, if executed through evidence-based, multidisciplinary, holistic and business-oriented elements, can convert a model of chronic care in a descriptive framework, which defines the whole development cycle of innovative solutions for chronic disease management. Hypothesis 3: it is possible to design a method to evaluate processes, outcomes and skill acquisition capacities, and assist multidisciplinary research teams in the creation of innovative solutions for chronic disease management. Hypothesis 4: it is possible to assist the development of innovative solutions for chronic disease management through a reference framework and produce positive effects, measured through key performance indicators. In order to verify the hypotheses, a methodological approach, composed of four Phases that correspond to each one of the stated hypothesis, was defined. Prior to this, a “Phase 0”, consisting in a multi-domain and multi-disciplinary background analysis of the problem (i.e.: systematic adoption of innovation to chronic care), was carried out. During phase 1, in order to verify the first hypothesis, a Knowledge Translation Process (KTP) was developed, starting from the JBI Joanna Briggs Institute (JBI) model of evidence-based healthcare was used (Pearson, 2005) and adding Four Innovation Blocks. These blocks represent an enriched description, added to the JBI model, to accelerate the transformation of evidence-healthcare through innovation; the innovation blocks are built on top of the conclusions drawn after Phase 0. The background analysis gave also indication on the materials and methods to be used for the execution of the KTP, carried out during phase 2, that translates the actual best available evidence for chronic care into action: this resulted in a descriptive Framework, which is a description of a model of chronic care (the Chronic Care Model was chosen, Wagner, 1996) in terms of goals, specified requirements and Key Performance Indicators, and articulated in the three development cycles of innovation (i.e. design, implementation and evaluation). Thanks to this result the second hypothesis was verified. During phase 3, in order to verify the third hypothesis, a mixed-method to evaluate multidisciplinary teams working on innovations for chronic care, was created, based on a mixed-method used for the evaluation of Multidisciplinary Translational Teams (Wooden, 2013). This method adds a procedural dimension to the descriptive component of the Framework, The result of this phase consisted in a draft version of the framework, ready to be tested in a real scenario. During phase 4, a single and multilevel case study, with participant-observation data collection, was carried out, in order to have a complete but at the same time multi-sectorial evaluation of the framework. The activities that the LifeStech research group carried out since 2008 to improve the management of diabetes have been selected as case study. The results achieved showed that the framework allowed to improve the research activities in different directions: the quality and quantity of the research publications that LifeStech has issued, have increased substantially; 2 project grants to improve the management of diabetes, have been assigned: the first is a grant funding applied research while the second is about accelerating innovations into the market; by using the assessment KPIs of the framework, the proof of concept validation of a prototype developed in a research project was transformed into an early stage assessment of innovative eHealth intervention for Diabetes Management, which has been recently included in the repository of innovative practice of the European Innovation Partnership on Active and Health Ageing initiative. The verification of the 4 hypotheses lead to verify the main hypothesis of this research work: it is possible to contribute to bridge the gap between healthcare and innovation and, in turn, improve the way chronic care is delivered by healthcare systems.

Tecnología y competitividad en la economía mundial. Factores e indicadores clave de actuación

Durante los últimos 30 años se han creado una gran cantidad de índices e indicadores para evaluar la práctica totalidad de los países bajo distintas premisas. La tesis parte de un análisis detallado de más de un centenar de estos índices diferenciados entre los enfocados al desarrollo y los enfocados a la competitividad económica (véase Módulo I anexo) y tras esto, dentro del estudio teórico nos hemos centrado en 35 indicadores relacionados con la tecnología (capítulo 3, apartado 3.3.). La justificación, el objetivo de la investigación y la estructura de la tesis se presenta en el capítulo 2. Respecto a la metodología, tal y como se plantea en la hipótesis (apartado 2.2.), se presentan los criterios de selección de seis grupos de países (EP, EPC, EC, ECI, EI y EM)1, que se van a evaluar. Posteriormente se plantea el Protocolo de Cálculo para el total de grupos seleccionados dentro de los periodos 2005-2006 y 2007-2008 y se realiza una profunda evaluación estadística como se plantea dentro de la coherencia estadística explicada en el apartado 3.4.4.5. (también se dispone de los cálculos dentro de los Módulos II, III, IV y V anexos). Tras la metodología establecemos la construcción de un índice sintético NRI(A) y, tras esto, estudiamos las relaciones así como la interpretación de los resultados (capítulo 4, apartado 4.1.). Una vez obtenidos los resultados realizamos la validación de los mismos para el periodo 2007-2015 (capítulo 4 - apartado 4.2. – y los Módulos VI y VII anexos). En el capítulo 5, evaluamos el nivel de preparación tecnológico y su relación con la competitividad para los seis grupos de países (véase desde los apartados 5.1.y 5.2.). Dentro de cada uno de los seis grupos de países, sabemos las variables que cualitativamente tienen que priorizarse para mejorar el nivel de preparación tecnológica de los mismos. Estas variables inicialmente son sesenta y ocho – año 2007-08 –, y al final de la implementación del método se reducen notablemente. Estas variables finales, llamadas Indicadores Clave de Actuación (ICA), se agrupan – vía análisis factorial – en Factores Clave de Actuación que nos simplifican lo planteado. Para cada grupo de países se realizan los conglomerados de acuerdo a sus valores dentro de las ICAs en busca de singularidades y se ha llevado a cabo un análisis minucioso en función de los Indicadores Clave de Actuación. La Tesis, plantea científicamente como podemos evaluar el nivel de preparación tecnológica y su relación con la competitividad, desde un índice sintético creado NRI(A), que contempla únicamente Indicadores Clave de Actuación (variables seleccionadas) a partir de las variables originales del Network Readiness Index (NRI(R)) . Por último se plantea dentro de las conclusiones, capítulo 6, diferentes líneas de investigación, desarrollando dos de ellas que se pueden encontrar en el Modulo VIII anexo. Por un lado presentamos una línea de investigación centrada en 29 economías africanas (EA) de las que disponemos información fidedigna y por otro lado una segunda línea en la que nos centramos en la evaluación de España respecto a sus naciones coetáneas. La principal voluntad de la presente tesis doctoral, es simplificar la evaluación del nivel de preparación tecnológica y la relación de esta con la competitividad a partir de la creación de un índice sintético propio NRI(A). ABSTRACT - During the last 30 years, many institutions have been evaluating and endless range of variables in practically all of the world´s economies. This Thesis is the product of a detail analysis of more than one hundred indicators / index, which we have divided into two parts: those focused on development and those focused on economic competitiveness (see module I annex). Secondly, in our theoretical research we have concentrated on those indicators, which are related to technology (chapters 3, section 3.3). The selection criteria of the six economic groups to be evaluated are included in our methodology, as mentioned in the hypothesis (see section 2.2.). Subsequently the calculation procedure is also presented for all of the groups selected between the periods 2005-2006 and 2007-2008. Next, we perform a statistical study, which is presented accordingly in the segment dealing with statistics, section 3.4.4.5. The calculations are provided in modules I, II, III, IV and V annex. After the methods segment of the Thesis, we develop our argument, in which we presented the explanation of the relations as well as the interpretation of the results. Also at the chapter 4 you can find the result validation from 2007 till 2015. Finally in chapters 6, we evaluate the conclusions for the six economic groups (see section 6.2.). The Thesis scientifically explains the way in which we evaluate economic competitiveness in 135 countries from a standpoint of strictly technological variables. Six groups of countries are evaluated, being divided by criteria, which homogenize the economies under review. We recognize that the variables of each economic group should be prioritized in order to better their competitiveness. Initially the group consisted of 68 variables, a number which was considerably reduced after the implementation of our methodology. Likewise, these final variables, dubbed “key performance indicators”, were grouped into factors (key performance factors), which greatly simplify the prioritization process. At the same time, conglomerates have been created for each economic group according to their value concerning the selected variables. A detailed country – by – country analysis of their positioning in each of the six groups was conducted for each of the mathematically selected key performance indicators. Finally, at the Conclusion we introduce new research lines and between them we focus on two research lines in which ones we are working with (see chapter 6). We basically try to apply the multivariable analysis method, the factorial analysis and the conglomerates to designed and implemented our method first in a geographically group of countries (Africa) and secondly to evaluate and develop the public policies for Spain for the development of its competitively, comparing Spain to his coetaneous countries in Europe (see Module VIII). The main objective of this Doctoral Thesis is to noticeably simplify the comparison of the Network Readiness Index and its relation with the economic competitiveness of the countries using a new synthetic index design by us.

Using clinical indicators in a quality improvement programme targeting cardiac care

Rationale. The Brisbane Cardiac Consortium, a quality improvement collaboration of clinicians from three hospitals and five divisions of general practice, developed and reported clinical indicators as measures of the quality of care received by patients with acute coronary syndromes or congestive heart failure. Development of indicators. An expert panel derived indicators that measured gaps between evidence and practice. Data collected from hospital records and general practice heart-check forms were used to calculate process and outcome indicators for each condition. Our indicators were reliable (kappa scores 0.7-1.0) and widely accepted by clinicians as having face validity. Independent review of indicator-failed, in-hospital cases revealed that, for 27 of 28 process indicators, clinically legitimate reasons for withholding specific interventions were found in

A framework for assessing business-incubation input, process and output performance:proceedings of the RENT XXVII Conference, 20-22 November 2013, Vilnius, Lithuania

With business incubators deemed as a potent infrastructural element for entrepreneurship development, business incubation management practice and performance have received widespread attention. However, despite this surge of interest, scholars have questioned the extent to which business incubation delivers added value. Thus, there is a growing awareness among researchers, practitioners and policy makers of the need for more rigorous evaluation of the business incubation output performance. Aligned to this is an increasing demand for benchmarking business incubation input/process performance and highlighting best practice. This paper offers a business incubation assessment framework, which considers input/process and output performance domains with relevant indicators. This tool adds value on different levels. It has been developed in collaboration with practitioners and industry experts and therefore it would be relevant and useful to business incubation managers. Once a large enough database of completed questionnaires has been populated on an online platform managed by a coordinating mechanism, such as a business incubation membership association, business incubator managers can reflect on their practices by using this assessment framework to learn their relative position vis-à-vis their peers against each domain. This will enable them to align with best practice in this field. Beyond implications for business incubation management practice, this performance assessment framework would also be useful to researchers and policy makers concerned with business incubation management practice and impact. Future large-scale research could test for construct validity and reliability. Also, discriminant analysis could help link input and process indicators with output measures.

Online MBPeT dashboard : enabling performance testing as a service in the cloud

In this thesis, tool support is addressed for the combined disciplines of Model-based testing and performance testing. Model-based testing (MBT) utilizes abstract behavioral models to automate test generation, thus decreasing time and cost of test creation. MBT is a functional testing technique, thereby focusing on output, behavior, and functionality. Performance testing, however, is non-functional and is concerned with responsiveness and stability under various load conditions. MBPeT (Model-Based Performance evaluation Tool) is one such tool which utilizes probabilistic models, representing dynamic real-world user behavior patterns, to generate synthetic workload against a System Under Test and in turn carry out performance analysis based on key performance indicators (KPI). Developed at Åbo Akademi University, the MBPeT tool is currently comprised of a downloadable command-line based tool as well as a graphical user interface. The goal of this thesis project is two-fold: 1) to extend the existing MBPeT tool by deploying it as a web-based application, thereby removing the requirement of local installation, and 2) to design a user interface for this web application which will add new user interaction paradigms to the existing feature set of the tool. All phases of the MBPeT process will be realized via this single web deployment location including probabilistic model creation, test configurations, test session execution against a SUT with real-time monitoring of user configurable metric, and final test report generation and display. This web application (MBPeT Dashboard) is implemented with the Java programming language on top of the Vaadin framework for rich internet application development. The Vaadin framework handles the complicated web communications processes and front-end technologies, freeing developers to implement the business logic as well as the user interface in pure Java. A number of experiments are run in a case study environment to validate the functionality of the newly developed Dashboard application as well as the scalability of the solution implemented in handling multiple concurrent users. The results support a successful solution with regards to the functional and performance criteria defined, while improvements and optimizations are suggested to increase both of these factors.

Characterization of the methanol recovery process at Prio Biocombustíveis S. A.

In a industrial environment, to know the process one is working with is crucial to ensure its good functioning. In the present work, developed at Prio Biocombustíveis S.A. facilities, using process data, collected during the present work, and historical process data, the methanol recovery process was characterized, having started with the characterization of key process streams. Based on the information retrieved from the stream characterization, Aspen Plus® process simulation software was used to replicate the process and perform a sensitivity analysis with the objective of accessing the relative importance of certain key process variables (reflux/feed ratio, reflux temperature, reboiler outlet temperature, methanol, glycerol and water feed compositions). The work proceeded with the application of a set of statistical tools, starting with the Principal Components Analysis (PCA) from which the interactions between process variables and their contribution to the process variability was studied. Next, the Design of Experiments (DoE) was used to acquire experimental data and, with it, create a model for the water amount in the distillate. However, the necessary conditions to perform this method were not met and so it was abandoned. The Multiple Linear Regression method (MLR) was then used with the available data, creating several empiric models for the water at distillate, the one with the highest fit having a R2 equal to 92.93% and AARD equal to 19.44%. Despite the AARD still being relatively high, the model is still adequate to make fast estimates of the distillate’s quality. As for fouling, its presence has been noticed many times during this work. Not being possible to directly measure the fouling, the reboiler inlet steam pressure was used as an indicator of the fouling growth and its growth variation with the amount of Used Cooking Oil incorporated in the whole process. Comparing the steam cost associated to the reboiler’s operation when fouling is low (1.5 bar of steam pressure) and when fouling is high (reboiler’s steam pressure of 3 bar), an increase of about 58% occurs when the fouling increases.