Quantification of magmatic and hydrothermal processes in a peralkaline syenite-alkali granite complex based on textures, phase equilibria, and stable and radiogenic isotopes

The Puklen complex of the Mid-Proterozoic Gardar Province, South Greenland, consists of various silica-saturated to quartz-bearing syenites, which are intruded by a peralkaline granite. The primary mafic minerals in the syenites are augite +/- olivine + Fe-Ti oxide + amphibole. Ternary feldspar thermometry and phase equilibria among mafic silicates yield T = 950-750degreesC, a(SiO2) = 0.7-1 and an f(O2) of 1-3 log units below the fayalite-magnetite-quartz (FMQ) buffer at 1 kbar. In the granites, the primary mafic minerals are ilmenite and Li-bearing arfvedsonite, which crystallized at temperatures below 750degreesC and at f(O2) values around the FMQ buffer. In both rock types, a secondary post-magmatic assemblage overprints the primary magmatic phases. In syenites, primary Ca-bearing minerals are replaced by Na-rich minerals such as aegirine-augite and albite, resulting in the release of Ca. Accordingly, secondary minerals include ferro-actinolite, (calcite-siderite)(ss), titanite and andradite in equilibrium with the Na-rich minerals. Phase equilibria indicate that formation of these minerals took place over a long temperature interval from near-magmatic temperatures down to similar to300degreesC. In the course of this cooling, oxygen fugacity rose in most samples. For example, late-stage aegirine in granites formed at the expense of arfvedsonite at temperatures below 300degreesC and at an oxygen fugacity above the haematite-magnetite (HM) buffer. The calculated delta(18)O(melt) value for the syenites (+5.9 to +6.3parts per thousand) implies a mantle origin, whereas the inferred delta(18)O(melt) value of <+5.1parts per thousand for the granitic melts is significantly lower. Thus, the granites require an additional low-delta(18)O contaminant, which was not involved in the genesis of the syenites. Rb/Sr data for minerals of both rock types indicate open-system behaviour for Rb and Sr during post-magmatic metasomatism. Neodymium isotope compositions (epsilonNd(1170 Ma) = -3.8 to -6.4) of primary minerals in syenites are highly variable, and suggest that assimilation of crustal rocks occurred to variable extents. Homogeneous epsilon(Nd) values of -5.9 and -6.0 for magmatic amphibole in the granites lie within the range of the syenites. Because of the very similar neodymium isotopic compositions of magmatic and late- to post-magmatic minerals from the same syenite samples a principally closed-system behaviour during cooling is implied. In contrast, for the granites an externally derived fluid phase is required to explain the extremely low epsilon(Nd) values of about -10 and low delta(18)O between +2.0 and +0.5parts per thousand for late-stage aegirine, indicating an open system in the late-stage history. In this study we show that the combination of phase equilibria constraints with stable and radiogenic isotope data on mineral separates can provide much better constraints on magma evolution during emplacement and crystallization than conventional whole-rock studies.

Buccal dental microwear and stable isotopes of El Collado: A mesolithic site from Spain,

This study examines the correlation between buccal dental microwear and stable isotopes. The buccal surface of post-canine teeth casts from El Collado, the largest Mesolithic site in Spain, were examined under Scanning Electron Microscope; photomicrographs were taken from the middle third of the buccal surface with magnification 100X. Only six individuals passed the criteria for buccal dental microwear analysis. The photomicrographs were treated by adobe Photoshop 8.01 to cover an area 0.56 mm² of middle third of buccal surface, the output photomicrographs were digitized using Sigmascan Pro 5 by SPSS. Then the correlation between buccal microwear pattern and stable isotopes of the same individuals, of the previous study of Guixe et al., 2006, was examined using a Pearson test. Statistical analysis revealed that there is no significant correlation between stable isotopes and buccal dental microwear of the people of the Mesolithic site of El Collado. The historical and archaeological documentation suggest that the Mesolithic people tended to consume marine food. Fish-drying techniques were used during the Mesolithic period which allowed the introduction of dust and sand to the fish. These abrasive particles affected the buccal dental microwear pattern, so that no correlation between the isotopes and microwear may be expected. This also suggests that the buccal dental microwear pattern exceeds dietary reconstruction to reconstruct food processing techniques.

Minerais, métaux, isotopes : recherches archéométriques sur les mines de plomb et d'argent en Valais, Suisse

RESUME Les nombreuses mines de plomb et d'argent du Valais témoignent d'une activité minière importante par le passé, sans toutefois dévoiler ni l'importance des minéralisations, ni l'ancienneté de l'exploitation. La présente recherche a pour but de comprendre pourquoi les grandes mines sont concentrées dans une région, et de déterminer la chronologie de leur exploitation. L'originalité de ce travail réside dans son interdisciplinarité, plus précisément dans l'application des méthodes minéralogiques pour résoudre une problématique historique. Afin d'évaluer les ressources minières en plomb et en argent du Valais, 57 mines et indices ont été repérés et échantillonnés. Les signatures isotopiques du Pb (74 analyses) et les compositions chimiques élémentaires (45 analyses) ont été déterminées. Les plus grandes exploitations se situent dans la nappe de Siviez-Mischabel, au Sud d'une ligne Vallée du Rhône / Val de Bagnes ainsi que dans le Lötschental. Elles sont liées, d'après leur signature isotopique de plomb, à des minéralisations d'âge calédonien (408 à 387 Ma) ou tardi-hercynien (333 à 286 Ma). À ces périodes, l'ancien continent est très lourd et subit une subsidence thermique. Des premières fractures d'extrême importance se forment. Comme il s'agit d'accidents tectoniques majeurs, des gisements de grande extension peuvent se former dans ce contexte. D'autres minéralisations se situent dans les domaines helvétiques (Massif des Aiguilles Rouges, Massif du Mont Blanc et couverture sédimentaire), couvrant une région au Nord de la Vallée du Rhône et du Val d'Entremont. D'âge post-hercynien à tardi-alpin (notons qu'il n'y a pas de minéralisations d'âge tertiaire), elles sont pour la plupart liées à des intrusions granitiques, sources de plomb juvénile. Les mines situées dans ces unités tectoniques sont nettement moins étendues que celles de la nappe de Siviez-Mischabel, ce qui permet de penser que les minéralisations correspondantes le sont également. Les périodes d'exploitation des mines peuvent être déterminées par quatre approches différentes l'archéologie minière, la lecture des textes historiques, l'étude des déchets métallurgiques et la comparaison de la signature isotopique du plomb, que l'on mesure dans un objet archéologique bien daté (monnaie, bijoux etc.), avec celles des minerais. Cette dernière méthode a été appliquée et développée dans le cadre de la présente recherche. Pour ce faire, 221 échantillons d'objet en plomb ou en argent datés entre l'Âge du Fer et le Moyen Age ont été analysés par la méthode des isotopes de plomb et comparés à environ 1800 signatures isotopiques de minerais des gisements les plus importants en Suisse et en Europe. Avant l'époque romaine et jusqu'au 1 er siècle de cette époque, le plomb provient principalement des mines de la péninsule ibérique alors en pleine activité. Un apport des mines d'Europe tempérée, notamment des Vosges, reste à confirmer. A partir du 1" siècle de notre ère, le plomb a principalement été importé en Suisse occidentale de grands centres de productions situées en Allemagne du Nord (région d'Eifel). Les mines de plomb valaisannes, notamment celles de Siviez, débutent leur exploitation en même temps, principalement pour couvrir les besoins locaux, mais également pour l'exportation jusque dans l'arc lémanique et, dans une moindre importance, au-delà. À partir du 4ème siècle, le besoin en plomb a été couvert par un apport des mines locales et par la refonte d'objets anciens. Ce changement d'approvisionnement est probablement lié aux tensions créées par les invasions germaniques durant la seconde moitié du 3' siècle ; le marché suisse n'est dès lors plus approvisionné par le nord, c'est-à-dire par la vallée du Rhin. Quant à l'argent, l'exploitation de ce métal est attestée à partir de la fin du La Tène, peu après l'apparition de ce métal dans la région valaisanne. L'échantillonnage ne couvrant pas l'époque romaine, rien n'est connu pour cette période. A partir du 5" siècle, une exploitation d'argent est de nouveau attestée. Cependant, l'exploitation d'argent des mines locales ne gagne en importance qu'à partir du Moyen Âge avec les frappes monétaires, notamment les frappes carolingiennes et épiscopales valaisannes. Les sources d'argent sont différentes selon leur utilisation : à part quelques exceptions notamment vers la fin du La Tène et au tardo-antique, les bijoux et objets de cultes ont été souvent créés à partir d'argent refondu, contrairement aux monnaies pour lesquelles l'argent provient des mines locales. On note un approvisionnement différent de ce métal pour les objets, notamment les monnaies, selon leur lieu de fabrication : on peut clairement distinguer les objets valaisans de ceux du Plateau Suisse. SUMMARY The many lead and silver mines of the Valais testify of an important mining activity in the past, without however revealing neither the importance of the mineralizations, nor the era of the exploitation. The purpose of this research is to understand why the large mines are concentrated in one region, and to determine the history of their exploitation. The uniqueness of this work lies in its interdisciplinarity, more precisely in the application of mineralogical methods to solve historical problems. In order to evaluate the lead and silver mining resources of the Valais region, 57 mines and ore deposits were located and sampled. The isotope signatures of Pb (74 analyses) and the compositions of the chemical elements (45 analyses) were determined. The largest activities are in the Siviez-Mischabel area, located in the South of the boundary formed by the Rhone, Bagnes and Lotschental valleys. According to their lead isotope signatures, they are linked to mineralizations of the Caledonian (408 to 387 my) or tardi-Hercynian (333 to 286 my) orogenies. In those times, the old continent was very heavy and underwent a thermal subsidence. First fractures of great significance were formed. Through these major tectonic events, large extended ore deposits can be formed. Other mineralizations are found in the helvetic regions situated north of the Rhone and the Entremont valley (the Aiguilles Rouges basement, Mount Blanc basement and the covering sediment). Because they are from post-hercynien to tardi-alpine age (there are no mineralizations of tertiary age), they are mainly linked to granite intrusions, the sources of juvenile lead. The mines found in these tectonic units are significantly less extensive than those of the Siviez-Mischabel area, leading to the assumption that the respective mineralizations extend accordingly. The history of exploitation of the mines can be determined by four different sources: mining archaeology, historical texts, metallurgical waste, and the comparison of the isotope signature of the lead from accurately dated archaeological objects (currency, jewels etc), with those of the ores. This last approach was applied and developed within the framework of this research. The lead isotope signatures of 221 lead or silver objects from the Iron Age to the Middle Age were compared with approximately 1800 samples of ore of the most important ore deposits in Switzerland and Europe. Before the Roman time up to the 1st century, lead comes mainly from the mines of the Iberian Peninsula then in full activity. A contribution of the mines of Central Europe, in particular of the Vosges, remains to be confirmed. From the 1st century on, lead was mainly imported into Western Switzerland from Northern Germany (Eiffel region). The lead mines in the Valais region, in particular those of Siviez, begin their exploitation at the same time, mainly to meet the local needs, but also for export to the lemanic basin and of lesser importance, beyond. As from the 4th century, the need of lead was met by the production from local mines and the recycling of old objects. This change of supply is probably related to the tensions created by the Germanic invasions during second half of the 3rd century; as a consequence, the Swiss market is not supplied any more by the north, i.e. the Rhine valley. Silver production is confirmed starting from the end of La Tene, shortly after the appearance of this metal in the Valais region. Since no objects of Roman origin were analyzed, nothing is known for this period. From the 5th century on, silver production is again confirmed. However, significant silver production from local mines starts only in the Middle Age with the coinage, in particular Carolingian and Episcopal minting from the Valais region. The sources of silver differ according to their use: besides some exceptions in particular towards the end of La Tene and the tardi-Roman, the jewels and objects of worships were often created from recycled silver, contrary to the coins the silver for which comes from the local mines. A different source of silver is observed according to the location of coin manufacture: Objects originating from the Valais region are clearly distinguished from those from the Plateau Suisse. ZUSAMMENFASSUNG Die grosse Zahl von Blei- und Silberminen im Wallis ist Zeugnis einer bedeutenden Bergbautätigkeit, es fehlen aber Hinweise über ihren Umfang und den Zeitraum ihrer Ausbeutung. Die vorliegende Arbeit sucht zu ergründen, warum grosse Minen sich in einer eng begrenzten Region häufen und in welchem Zeitraum sie genutzt wurden. Die Besonderheit der Studie liegt in ihrer Interdisziplinarität, genauer in der Anwendung von mineralogischen Methoden zur Beantwortung historischer Fragestellungen. Zur Beurteilung der Lagerstätten wurden von 57 Minen und Aufschlüssen Proben entnommen oder Nachweise erbracht und mittels 74 Isotopen-Analysen von Blei und 45 chemischen Gesamtanalysen ausgewertet. Die wichtigsten Vorkommen liegen in der Siviez- Mischabel- Decke südlich der Linie Rhonetal- Val de Bagnes, sowie im Lötschental. Die Bleiisotopen- Alter weisen ihre Entstehung der kaledonischen (408 - 387 Mio. J.) oder der spät- herzynischen (333 - 286 Mio. J.) Gebirgsbildungsphase zu. In dieser Periode ist die kompakte Landmasse sehr schwer und erfairt eine thermische Absenkung. Es bilden sich tektonische Brüche von kontinentaler Ausdehnung. Die grossen tektonischen Bewegungen ermöglichen die Bildung von ausgedehnten Lagerstätten. Andere Vorkommen finden sich im Bereich der Helvetischen Alpen (Aiguilles Rouges Massiv, Mont-Blanc-Massiv und Sediment-Decken) im Gebiet nördlich des Rhonetales bis zum Val d'Entremont. Altersmässig sind sie der nach-hercynischen bis zur spät-alpidischen Orogenese zuzuweisen (auffällig ist das Fehlen von Vorkommen im Tertiär) und haben sich meist in der Folge von Granit- Intrusion, dem Ursprung von primärem Blei ausgebildet. Die Bergwerke in diesem Bereich sind deutlich weniger ausgedehnt als jene in der Siviez-Mischabel-Decke und entsprechen wahrscheinlich dem geringen Umfang der zugehörigen Vorkommen. Die Nutzungsperioden der Minen können mit vier verschiedenen Methoden bestimmt werden: Minenarchäologie, Historische Quellen, Auswertung von metallischen Abfällen (Schlacken) und Vergleich der Bleiisotopen-Zusammensetzung von Erzen mit jener von zeitlich gut datierbaren archäologischen Gegenständen (Münzen, Schmuckstücke). Die letztere Methode wurde im Rahmen der vorliegenden Forschungsarbeit entwickelt und angewendet. Zu diesem Zweck wurden an 221 Proben von Blei- oder Silberobjekten, die in die Periode zwischen Eisenzeit und Mittelalter eingestuft werden können, Bleiisotopen- Analysen durchgeführt und mit ca. 1800 Proben aus den wichtigsten Lagerstätten der Schweiz und Europas verglichen. Vor der Römerzeit und bis ins 1. Jahrh. stammt das Blei vornehmlich aus den in jener Zeit in voller Ausbeutung begriffenen Minen der Iberischen Halbinsel. Der Beitrag von Mitteleuropa, besonders der Vogesen, muss noch bestätigt werden. Ab dem 1. Jahrh. nach Chr. wurde die Westschweiz hauptschlich mit Blei aus den grossen Produktionszentren Norddeutschlands, vorwiegend der Eifel, versorgt. In dieser Periode setzt die Ausbeutung der Bleiminen des Wallis, besonders von Siviez, ein. Sie dienen der Deckung des örtlichen Bedarfs aber auch der Ausfuhr in das Gebiet des Genfersees und in einem bescheidenen Rahmen sogar darüber hinaus. Ab dem 4. Jahrhundert wurden vermehrt alte Objekte eingeschmolzen. Dieser Wechsel der Versorgungsquellen war vermutlich eine Folge der Wölkerwanderung in der zweiten Hälfte des 3. Jahrhunderts. Ab diesem Zeitpunkt war Helvetien der Zugang zu den Versorgungsquellen des Nordens, besonders des Rheinlandes, verwehrt. Der Abbau von Silber ist ab dem Ende des La Tène nachgewiesen, nur wenig nach dem Auftreten dieses Metalls im Wallis. Über die Römerzeit können wegen dem Fehlen entsprechender Proben keine Aussagen gemacht werden. Eine erneute Abbauperiode ist ab dem 5. Jahrhundert nachgewiesen. Die Produktion der örtlichen Minen erreicht aber erst im Mittelalter eine gewisse Bedeutung mit der Prägung von Mnzen durch die Karolinger und die Walliser Bischöfe. Die Herkunft des Silbers ist abhängig von dessen Verwendung. Mit wenigen Ausnahmen in der Zeit des La Tène und der späteren Römerzeit wurde für Kunst- und Kult- Gegenstände rezykliertes Silber verwendet, für Münzprägungen neues Silber aus den örtlichen Minen. Von Einfluss auf die Herkunft war auch der Produktionsstandort: Die Objekte aus dem Wallis unterscheiden sich deutlich von jenen des Mittellandes.

Pd-catalysed amidation of 2,6-dihalopurine nucleosides. Replacement of iodine at 0 ºC

Pd-catalysed reactions of 2-Cl, 2-Br and 2-I derivatives of a 6-chloropurine nucleoside with benzamide have been compared, using Pd2dba3, Xantphos and Cs2CO3 in toluene, between 20 and 80 °C. The reactivity order was 2-I > 2-Br > 6-Cl ≫ 2-Cl. The 2-I substituent could be replaced even at 0 °C, under conditions disclosed here for the first time. On the other hand, the replacement of the chlorine atom at position 2 (2-Cl) required 110 °C.

Tumor localization of radiolabeled antibodies against carcinoembryonic antigen in patients with carcinoma: a critical evaluation.

Purified, [131I]-labeled goat antibodies against carcinoembryonic antigen, which have been shown to localize in human carcinoma in nude mice, were injected into 27 patients with carcinoma. Patients were scanned with a scintillation camera at various intervals. In 11 patients, radioactivity was detectable in the tumor 48 hours after injection. Computerized subtraction of blood-pool radioactivity provided clearer pictures in positive cases, but in 16 patients the scans remained doubtful or negative. To study the specificity of [131I]-antibody localization, we gave some patients simultaneous injections of [125I]-labeled normal IgG. Both isotopes were measured by means of scintillation counting in tumors and normal tissues recovered after surgery. The results demonstrated that only the anti-CEA antibodies localized in tumors. However, the total antibody-derived radioactivity in the tumor was only about 0.001 of the injected dose. We conclude that, despite the present demonstration of specificity, this method of tumor detection is not yet clinically useful.

Study of isotopic variations in black powder: reflections on the use of stable isotopes in forensic science for source inference.

Isotope ratio mass spectrometry (IRMS) has recently made its appearance in the forensic community. This high-precision technology has already been applied to a broad range of forensic fields such as illicit drugs, explosives and flammable liquids, where current, routinely used techniques have limited powers of discrimination. The conclusions drawn from the majority of these IRMS studies appear to be very promising. Used in a comparative process, as in food or drug authentication, the measurement of stable isotope ratios is a new and remarkable analytical tool for the discrimination or the identification of a substance with a definite source or origin. However, the research consists mostly of preliminary studies. The significance of this 'new' piece of information needs to be evaluated in light of a forensic framework to assess the actual potential and validity of IRMS, considering the characteristics of each field. Through the isotopic study of black powder, this paper aims at illustrating the potential of the method and the limitations of current knowledge in stable isotopes when facing forensic problems.

Plutonium and americium isotopes as alternative chronostratigraphic markers in tropical regions: An application in the Havana Bay (Cuba)

The low 137Cs activity observed in marine sediments of tropical regions often precludes its use as chronostratigraphic marker. Here we present a study on the use of Pu and Am radioisotopes as alternative markers to constrain the 210Pb ages in a sediment core of the Havana Bay (Cuba). Mean activity ratios of 238Pu/239,240Pu, 241Am/239,240Pu and 241Pu/239,240Pu indicated that the nuclear weapon tests fallout is the main source of the anthropogenic radionuclides. While the inventory of 137Cs in the sediments is lower than the expected fallout inventory, 239,240Pu accumulates in the sediments with inventories higher than the expected fallout inventory. The high fluxes of 239,240Pu are nevertheless corroborated here through use of 210Pb, and confirm that focusing of solid particles is of great importance in the investigated site. 239,240Pu showed to be a useful time tracer in marine sites where the 137Cs signal is very low.

Stable carbon isotopes in archaeobotanical remains and palaeoclimate

Es descriu una metodologia recent per a inferir la precipitació en el passat basada en l’anàlisi de la composició isotòpica del carboni (δ13C) en restes arqueobotàniques. Un cop descrita la base fisiològica de la tècnica, s’il·lustra l’aplicabilitat de δ13C mitjançant un exemple referent al NE peninsular. Hom pretén proporcionar una estimació quantitativa de l’evolució de la precipitació estacional (primavera) i anual al llarg dels darrers quatre mil anys basada en δ13C. Les mostres analitzades comprenen carbons (pi blanc) i llavors carbonitzades (blat i ordi), i s’obtenen estimes pluviomètriques superiors en el passat que actualment, amb una tendència gradual cap a condicions progressivament més àrides. No obstant això, aquesta tendència no esdevé uniforme, i es detecten dues fases de major precipitació (1800-900 aC; 300 aC - 300 dC) alternadament amb períodes relativament secs (900-300 aC; 900 dC - present). Dels resultats presentats també es desprèn que la importància relativa de la pluja primaveral en el passat fou variable. Des d’aproximadament el 300 aC en endavant, el període primaveral subministrà una major proporció de pluja anual que actualment. Contràriament, durant el període 1800-800 dC la seva contribució va esdevenir inferior, i va aparèixer una fase transitòria (800-300 aC) que mostra una recuperació sobtada en aportació primaveral. Posteriorment a aquesta fase la sincronia de canvis en δ13C en granes i carbons suggereix l’arribada del clima mediterrani a la regió.

Stable isotopes in arid and semi-arid forest systems

El empleo de isótopos estables en el ámbito de la ecología forestal ha ido creciendo progresivamente en las últimas dos décadas. Cabe esperar que esta tendencia se mantenga en el futuro, ya que éstos aportan una visión integradora de cómo las plantas, hoy y en el pasado, han interaccionado con el medio así como con otros organismos. Su implementación es particularmente relevante en climas secos debido a la fuerte limitación de recursos que en ellos acontece. Tras una breve introducción sobre las bases teóricas de los isótopos estables en fisiología vegetal, esta revisión destaca, sobre diferentes escalas espaciales y temporales, los últimos avances en ecología forestal empleando esta metodología y con un énfasis especial en los sistemas áridos y semiáridos.

Prevalence of iodine inadequacy in Switzerland assessed by the estimated average requirement cut-point method in relation to the impact of iodized salt.

OBJECTIVE: To assess the iodine status of Swiss population groups and to evaluate the influence of iodized salt as a vector for iodine fortification. DESIGN: The relationship between 24 h urinary iodine and Na excretions was assessed in the general population after correcting for confounders. Single-day intakes were estimated assuming that 92 % of dietary iodine was excreted in 24 h urine. Usual intake distributions were derived for male and female population groups after adjustment for within-subject variability. The estimated average requirement (EAR) cut-point method was applied as guidance to assess the inadequacy of the iodine supply. SETTING: Public health strategies to reduce the dietary salt intake in the general population may affect its iodine supply. SUBJECTS: The study population (1481 volunteers, aged ≥15 years) was randomly selected from three different linguistic regions of Switzerland. RESULTS: The 24 h urine samples from 1420 participants were determined to be properly collected. Mean iodine intakes obtained for men (n 705) and women (n 715) were 179 (sd 68.1) µg/d and 138 (sd 57.8) µg/d, respectively. Urinary Na and Ca, and BMI were significantly and positively associated with higher iodine intake, as were men and non-smokers. Fifty-four per cent of the total iodine intake originated from iodized salt. The prevalence of inadequate iodine intake as estimated by the EAR cut-point method was 2 % for men and 14 % for women. CONCLUSIONS: The estimated prevalence of inadequate iodine intake was within the optimal target range of 2-3 % for men, but not for women.

Stable isotopes indicate population structuring in the Southwest Atlantic population of right whales

From the early 17th century to the 1970s southern right whales, Eubalaena australis, were subject to intense exploitation along the Atlantic coast of South America. Catches along this coast recorded by whalers originally formed a continuum from Brazil to Tierra del Fuego. Nevertheless, the recovery of the population has apparently occurred fragmentarily, and with two main areas of concentration, one off southern Brazil (Santa Catarina) and another off central Argentina (Peninsula Valdés). This pattern suggests some level of heterogeneity amongst the population, which is apparently contradicted by records that traced individuals moving throughout the whole geographical extension covered by the species in the Southwest Atlantic. To test the hypothesis of the potential occurrence of discrete subpopulations exploiting specific habitats, we investigated N, C and O isotopic values in 125 bone samples obtained from whaling factories operating in the early 1970s in southern Brazil (n = 72) and from contemporary and more recent strandings occurring in central Argentina (n = 53). Results indicated significant differences between the two sampling areas, being δ13C and δ18O values significantly higher in samples from southern Brazil than in those from central Argentina. This variation was consistent with isotopic baselines from the two areas, indicating the occurrence of some level of structure in the Southwest Atlantic right whale population and equally that whales more likely feed in areas commonly thought to exclusively serve as nursing grounds. Results aim at reconsidering of the units currently used in the management of the southern right whale in the Southwest Atlantic Ocean. In the context of the current die-off affecting the species in Peninsula Valdés, these results also highlight the necessity to better understand movements of individuals and precisely identify their feeding areas.

Biogeochemical processes controlling oxygen and carbon isotopes of diatom silica in Late Glacial to Holocene lacustrine rhythmites

Biogeochemical cycles and sedimentary records in lakes are related to climate controls on hydrology and catchment processes. Changes in the isotopic imposition of the diatom frustules (δ 18 O diatom and δ 13 C diatom ) in lacustrine sediments can be used to reconstruct palaeoclimatic and palaeoenvironmental changes. The Lago Chungará (Andean Altiplano, 18°15 ′ S, 69°10 ′ W, 4520 masl) diatomaceous laminated sediments are made up of white and green multiannual rhythmites. White laminae were formed during short-term diatom super-blooms, and are composed almost exclusively of large-sized Cyclostephanos andinus.These diatoms bloom during mixing events when recycled nutrients from the bottom waters are brought to the surface and/or when nutrients are introduced from the catchment during periods of strong runoff. Conversely, the green laminae are thought to have been deposited over several years and are composed of a mixture of diatoms (mainly smaller valves of C. andinus and Discostella stelligera ) and organic matter. These green laminae reflect the lake's hydrological recovery from a status favouring the diatom super-blooms (white laminae) towards baseline conditions. δ 18 O diatom and δ 13 C diatom from 11,990 to 11,530 cal years BP allow us to reconstruct shifts in the precipitation/evaporation ratio and changes in the lake water dissolved carbon concentration, respectively. δ 18 O diatom values indicate that white laminae formation occurred mainly during low lake level stages, whereas green laminae formation generally occurred during high lake level stages. The isotope and chronostratigraphical data together suggest that white laminae deposition is caused by extraordinary environmental events. El Niño-Southern Oscillation and changes in solar activity are the most likely climate forcing mechanisms that could trigger such events, favouring hydrological changes at interannual-to-decadal scale. This study demonstrates the potential for laminated lake sediments to document extreme pluriannual events.

Buccal dental microwear and stable isotopes of El Collado: A mesolithic site from Spain,

This study examines the correlation between buccal dental microwear and stable isotopes. The buccal surface of post-canine teeth casts from El Collado, the largest Mesolithic site in Spain, were examined under Scanning Electron Microscope; photomicrographs were taken from the middle third of the buccal surface with magnification 100X. Only six individuals passed the criteria for buccal dental microwear analysis. The photomicrographs were treated by adobe Photoshop 8.01 to cover an area 0.56 mm² of middle third of buccal surface, the output photomicrographs were digitized using Sigmascan Pro 5 by SPSS. Then the correlation between buccal microwear pattern and stable isotopes of the same individuals, of the previous study of Guixe et al., 2006, was examined using a Pearson test. Statistical analysis revealed that there is no significant correlation between stable isotopes and buccal dental microwear of the people of the Mesolithic site of El Collado. The historical and archaeological documentation suggest that the Mesolithic people tended to consume marine food. Fish-drying techniques were used during the Mesolithic period which allowed the introduction of dust and sand to the fish. These abrasive particles affected the buccal dental microwear pattern, so that no correlation between the isotopes and microwear may be expected. This also suggests that the buccal dental microwear pattern exceeds dietary reconstruction to reconstruct food processing techniques.

Pd-catalysed amidation of 2,6-dihalopurine nucleosides. Replacement of iodine at 0 ºC

Pd-catalysed reactions of 2-Cl, 2-Br and 2-I derivatives of a 6-chloropurine nucleoside with benzamide have been compared, using Pd2dba3, Xantphos and Cs2CO3 in toluene, between 20 and 80 °C. The reactivity order was 2-I > 2-Br > 6-Cl ≫ 2-Cl. The 2-I substituent could be replaced even at 0 °C, under conditions disclosed here for the first time. On the other hand, the replacement of the chlorine atom at position 2 (2-Cl) required 110 °C.