Advanced Characterisation of a Coffee Fermenting Tank by Multi-distributed Wireless Sensors: Spatial Interpolation and Phase Space Graphs

The fermentation stage is considered to be one of the critical steps in coffee processing due to its impact on the final quality of the product. The objective of this work is to characterise the temperature gradients in a fermentation tank by multi-distributed, low-cost and autonomous wireless sensors (23 semi-passive TurboTag® radio-frequency identifier (RFID) temperature loggers). Spatial interpolation in polar coordinates and an innovative methodology based on phase space diagrams are used. A real coffee fermentation process was supervised in the Cauca region (Colombia) with sensors submerged directly in the fermenting mass, leading to a 4.6 °C temperature range within the fermentation process. Spatial interpolation shows a maximum instant radial temperature gradient of 0.1 °C/cm from the centre to the perimeter of the tank and a vertical temperature gradient of 0.25 °C/cm for sensors with equal polar coordinates. The combination of spatial interpolation and phase space graphs consistently enables the identification of five local behaviours during fermentation (hot and cold spots).

Impacts of global change on iberian forest ecosystems inferred from the spanish national forest inventory = Impactos del cambio global en ecosistemas forestales ibéricos a partir del inventario forestal nacional

Los efectos del cambio global sobre los bosques son una de las grandes preocupaciones de la sociedad del siglo XXI. Algunas de sus posibles consecuencias como son los efectos en la producción, la sostenibilidad, la pérdida de biodiversidad o cambios en la distribución y ensamblaje de especies forestales pueden tener grandes repercusiones sociales, ecológicas y económicas. La detección y seguimiento de estos efectos constituyen uno de los retos a los que se enfrentan en la actualidad científicos y gestores forestales. En base a la comparación de series históricas del Inventario Forestal Nacional Español (IFN), esta tesis trata de arrojar luz sobre algunos de los impactos que los cambios socioeconómicos y ambientales de las últimas décadas han generado sobre nuestros bosques. En primer lugar, esta tesis presenta una innovadora metodología con base geoestadística que permite la comparación de diferentes ciclos de inventario sin importar los diferentes métodos de muestreo empleados en cada uno de ellos (Capítulo 3). Esta metodología permite analizar cambios en la dinámica y distribución espacial de especies forestales en diferentes gradientes geográficos. Mediante su aplicación, se constatarán y cuantificarán algunas de las primeras evidencias de cambio en la distribución altitudinal y latitudinal de diferentes especies forestales ibéricas, que junto al estudio de su dinámica poblacional y tasas demográficas, ayudarán a testar algunas hipótesis biogeográficas en un escenario de cambio global en zonas de especial vulnerabilidad (Capítulos 3, 4 y 5). Por último, mediante la comparación de ciclos de parcelas permanentes del IFN se ahondará en el conocimiento de la evolución en las últimas décadas de especies invasoras en los ecosistemas forestales del cuadrante noroccidental ibérico, uno de los más afectados por la invasión de esta flora (Capítulo 6). ABSTRACT The effects of global change on forests are one of the major concerns of the XXI century. Some of the potential impacts of global change on forest growth, productivity, biodiversity or changes in species assembly and spatial distribution may have great ecological and economic consequences. The detection and monitoring of these effects are some of the major challenges that scientists and forest managers face nowadays. Based on the comparison of historical series of the Spanish National Forest Inventory (NFI), this thesis tries to shed some light on some of the impacts driven by recent socio-economic and environmental changes on our forest ecosystems. Firstly, this thesis presents an innovative methodology based on geostatistical techniques that allows the comparison of different NFI cycles regardless of the different sampling methods used in each of them (Chapter 3). This methodology, in conjunction with other statistical techniques, allows to analyze changes in the spatial distribution and population dynamics of forest species along different geographic gradients. By its application, this thesis presents some of the first evidences of changes in species distribution along different geographical gradients in the Iberian Peninsula. The analysis of these findings, of species population dynamics and demographic rates will help to test some biogeographical hypothesis on forests under climate change scenarios in areas of particular vulnerability (Chapters 3, 4 and 5). Finally, by comparing NFI cycles with permanent plots, this thesis increases our knowledge about the patterns and processes associated with the recent evolution of invasive species in the forest ecosystems of North-western Iberia, one of the areas most affected by the invasion of allien species at national scale (Chapter 6).

Emissões de gases de efeito estufa e amônia oriundas da criação de frangos de corte em múltiplos reúsos da cama

Vários países têm buscado investigar as emissões de gases do efeito estufa (GEE) e amônia (NH3) na atividade animal para melhor compreensão da dinâmica e excesso desses gases na atmosfera. As informações disponíveis na literatura sobre as emissões de GEE e NH3 em aviários são variáveis e incertas devido à diversidade e condições particulares das instalações, bem como das inúmeras diferenças no sistema de criação e das complexas interações observadas nos dejetos dos animais. A caracterização das emissões do setor avícola normalmente é realizada por monitoramento aéreo das concentrações dos gases dentro das instalações de produção. No entanto, alguns métodos adotados são insuficientes devido às interferências de outros gases, razão por que as medições podem não refletir, com exatidão, as emissões reais. Diante dessa complexidade, nesta pesquisa buscou-se aplicar técnicas que apresentam menores interferências, bem como desenvolver um sistema de amostragem para medir diretamente as emissões de N2O, CH4 e NH3 dos dejetos de frangos de corte. No desenvolvimento do método, utilizou-se como referência o princípio da câmara estática fechada e a análise por cromatografia gasosa (CG), para estimar as emissões de GEE. Para quantificação direta das emissões de NH3, adaptou-se um método semiaberto estático, baseado na captura, em meio ácido, do NH3 volatilizado dos dejetos das aves. Adicionalmente, buscou-se monitorar as emissões diárias de NH3, CH4 e N2O dos dejetos dos frangos, considerando o típico manejo de reutilização da cama de frango. Foram propostos modelos empíricos para as predições das emissões de N2O, CH4 e NH3, em função do número de reutilizações da cama, da idade das aves e de propriedades físico-químicas da cama de frango. As emissões acumuladas por quatro ciclos de criação permitiram calcular perdas anuais de 0,14, 0,35, e 72,0 g de N2O, CH4 e NH3 ave-alojada-1 ano-1, respectivamente. Considerando o número de frangos de corte alojados em 2015, a atividade avícola emitiu cerca de 545,1 Gg CO2eq pelo manejo dos dejetos nos aviários, correspondente a 0,04 kg CO2eq por kg de carne. Reduções de 21, 40 e 78% foram observadas nas emissões anuais de N2O, CH4 e NH3, respectivamente, ao utilizar (seis ciclos) a cama somente em um ciclo de criação. Contudo, um balanço de N foi conduzido para contabilizar as entradas e saídas de N na produção de frangos de corte durante os quatro ciclos de criação avaliados. A principal entrada de N no sistema foi pela ração, como entrada secundária, o N via cama de frango, o qual aumentou consideravelmente a cada ciclo de reutilização. Considerando que esta pesquisa apresenta uma metodologia aplicável e inovadora para determinar os fluxos de GEE em galpões abertos no país, os dados serão úteis para o inventário anual brasileiro das emissões de GEE oriundas dos dejetos da avicultura de corte. Os resultados são úteis também para incentivar novas pesquisas que possam avançar no conhecimento de impactos e alternativas de mitigação de GEE na produção de frangos de corte e, adicionalmente, conferir sustentabilidade à produção de carne no Brasil

Controversy between curriculum design and curriculum development of online "highly specialized" education in the field of construction

Nowadays, on a global level, the Higher Education System has a complex and broad horizon of curricular tools to use in the teaching and learning process. In addition to these new educational instruments, full of possibilities, we face specific socio-economic conditions that affect in a significantly way the Curriculum Development in certain knowledge areas (areas traditionally built on a methodology based on a physical presence of students in the classroom). Some areas such as Restoration, Rehabilitation or Construction Pathologies, and the construction sector in general, require very defined and particular knowledge that only a small number of experts claim as specialized training. All these aspects condition the teaching methodology performed in a physical classroom at a university campus (the only option used until recent years) and made us consider the integration of online teaching in these areas too. The present work shows the teaching methodology used for the development of two online courses, where we offer distance learning for "highly specialized" formation in the Edification area (an area where traditionally there was only classroom training). At the beginning, both courses were designed by classroom training, but got a really small number of applications due to the specialized topic proposed. Later, we proposed a "Curriculum Redesign" of the contents, offering an online modality, which implied a significant demand both within and outside the university area. A notable feature of this educational experience is the great spectrum opened for attendees of both courses in the online version. This situation improved significantly the "Curriculum Development" for the student and implied an interesting new proposal on the offered contents and materials (what would have been really difficult to get in a face to face classroom). In conclusion, the absence of certain types of specialized contents in the academic university curricula makes essential to raise new methodologies to save the gap in this area through additional training courses as those analyzed in this paper. Thus, our experience opens a debate on the appropriateness of implementing online training in relation to the face to face training in constructive content subjects and, especially, presents a new scheme, not without controversy, for the curriculum design.

Teaching-learning process of historical heritage: a Journey as a beginning, path and end

The implantation of new university degrees within the European Higher Education Area implies the need of innovative methodologies in teaching and learning to improve the skills and competencies of students and to answer the growing needs that society continuously demands to heritage management experts. The present work shows an application of the teaching methodology proposed during the international workshop entitled “I International Planning Preservation Workshop. Learning from Al Andalus”, which included the participation of the University of Alicante and Granada, Università Politecnico di Milano and Hunter College City University of New York; where we tried to dissolve traditional boundaries derived of interuniversity cooperation programs. The main objective of the workshop was to discuss and debate the role of urban Historical Centers within the Global Heritage by the integrated work through multidisciplinary teams and the creation of a permanent international working group between these universities to both teach and research. The methodology of this workshop was very participatory and considered the idea of a new learning process generated by "a journey experience." A trip from global to local (from the big city to the small village) but also a trip from the local (historical) part of a big city to the global dimension of contemporary historical villages identified by the students through a system of exhibition panels in affinity groups, specific projects proposed by lecturers and teachers or the generation of publications in various areas (texts, photographs, videos, etc.). So, the participation of the students in this multidisciplinary meeting has enhanced their capacity for self-criticism in several disciplines and has promoted their ability to perform learning and research strategies in an autonomous way. As a result, it has been established a permanent international work structure for the development of projects of the Historical City. This relationship has generated the publication of several books whose contents have reflected the conclusions developed in the workshop and several teaching proposals shared between those institutions. All these aspects have generated a new way of understanding the teaching process through a journey, in order to study the representative role of university in the historical heritage and to make students (from planning, heritage management, architecture, geography, sociology, history or engineering areas) be compromised on searching strategies for sustainable development in the Contemporary City.

Striving for a common language: A white feminist parallel to Indigenous ways of knowing and researching

In Striving Towards a Common Language I outline an innovative methodology which consists of three strands encompassing an Indigenous-centred approach based on Indigenous Self-determination (participatory action research), relationship as central to socio-cultural dynamics, and feminist phenomenology. This methodology - which I call Living On the Ground was created in direct concert with 13 Indigenous women elders who were my hosts, teachers and walytja (family) as we worked together to create a dynamic cultural revitalisation project for their community, one of Australia's most remote Aboriginal settlements. I explain the processes I went through as a White Irish-Australian woman living with the women elders and their 11 dogs in a one room tin shed for two years, and tell of how the nexus of land, Ancestors, and the Tjukurrpa (Dreaming) combined with White cultural practices came to inspire a methodology which took the best from Indigenous and (White) feminist ways of knowing and of being. (c) 2005 Z. de Ishtar. Published by Elsevier Ltd. All rights reserved.

Business implications of manufacturing innovation : the experience of increasing automation in smaller to medium sized companies.

Despite the considerable potential of advanced manufacturing technologies (AMT) for improving the economic performance of many firms, a growing body of literature highlights many instances where realising this potential has proven to be a more difficult task than initially envisaged. Focussing upon the implementation of new manufacturing technologies in several smaller to medium sized enterprises (SME), the research examines the proposition that many of these problems can be attributed in part to inadequate consideration of the integrated nature of such technologies, where the effects of their implementation are not localised, but are felt throughout a business. The criteria for the economic evaluation of such technologies are seen as needing to reflect this, and the research develops an innovative methodology employing micro-computer based spreadsheets, to demonstrate how a series of financial models can be used to quantify the effects of new investments upon overall company performance. Case studies include: the development of a prototype machine based absorption costing system to assist in the evaluation of CNC machine tool purchases in a press making company; the economics and strategy of introducing a flexible manufacturing system for the production of ballscrews; and analysing the progressive introduction of computer based printing presses in a packaging and general print company. Complementary insights are also provided from discussion with the management of several other companies which have experienced technological change. The research was conducted as a collaborative CASE project in the Interdisciplinary Higher Degrees Scheme and was jointly funded by the SERC and Gaydon Technology Limited and later assisted by PE-Inbucon. The findings of the research shows that the introduction of new manufacturing technologies usually requires a fundamental rethink of the existing practices of a business. In particular, its implementation is seen as ideally needing to take place as part of a longer term business and manufacturing strategy, but that short term commercial pressures and limited resources often mean that firms experience difficulty in realising this. The use of a spreadsheet based methodology is shown to be of considerable assistance in evaluating new investments, and is seen as being the limit of sophistication that a smaller business is willing to employ. Several points for effective modelling practice are also given, together with an outline of the context in which a modelling approach is most applicable.

Total synthesis of furospongolide and related furanolipid analogues as potential anti-tumour agents

This thesis details the design, development and execution of innovative methodology in the total synthesis of the terpene-derived marine natural product, furospongolide. It also outlines the synthetic routes used to prepare a novel range of furanolipids derivatives and subsequent evaluation of their potential as antitumour agents. The first chapter is a review of the literature describing efforts undertaken towards the synthesis of biologically active furanosesterterpenoid marine natural products. A brief discussion on the sources and biological activity exhibited by furan natural products is also provided. In addition, a concise account of the role of hypoxia in cancer, and the increasing interest in HIF-1 inhibition as a target for chemotherapeutics is examined. The second chapter discusses the concise synthesis of the marine HIF-1 inhibitor furospongolide, which was achieved in five linear steps from (E,E)-farnesyl acetate. The synthetic strategy features a selective oxidation reaction, a Schlosser sp3-sp3 cross-coupling, a Wittig cross-coupling and an elaborate one-pot selective reduction, lactonisation and isomerization reaction to install the butenolide ring. The structure-activity relationship of furospongolide was also investigated. This involved the design and synthesis of a library of structurally modified analogues sharing the same C1-C13 subunit. This was achieved by exploiting the brevity and high level of convergence of our synthetic route together with the readily amenable structure of our target molecule. Exploiting the Schlosser cross-coupling allowed for replacement of furan with other heterocycles in the preparation of various furanolipid and thiophenolipid derivatives. The employment of reductive amination and Wittig chemistry further added to our novel library of structural derivatives. The third chapter discusses the results obtained from the NCI from biological evaluation From a collection of 28 novel compounds evaluated against the NCI-60 cancer cell array, six drug candidates were successfully selected for further biological evaluation on the basis of antitumour activity. COMPARE analysis revealed a strong correlation between some of our design analogues and the blockbuster anticancer agent tamoxifen, further supporting the potential of furanolipids in the treatment of breast cancer. The fourth chapter, details the full experimental procedures, including spectroscopic and analytical data for all the compounds prepared during this research.

Ocular Risk Factors for Exudative AMD: A Novel Semiautomated Grading System

Purpose. To evaluate the contribution of the ocular risk factors in the conversion of the fellow eye of patients with unilateral exudative AMD, using a novel semiautomated grading system. Materials and Methods. Single-center, retrospective study including 89 consecutive patients with unilateral exudative AMD and ≥3 years of followup. Baseline color fundus photographs were graded using an innovative grading software, RetmarkerAMD (Critical Health SA). Results. The follow-up period was 60.9 ± 31.3 months. The occurrence of CNV was confirmed in 42 eyes (47.2%). The cumulative incidence of CNV was 23.6% at 2 years, 33.7% at 3 years, 39.3% at 5 years, and 47.2% at 10 years, with a mean annual incidence of 12.0% (95% CI = 0.088-0.162). The absolute number of drusen in the central 1000 and 3000  μ m (P < 0.05) and the absolute number of drusen ≥125 µm in the central 3000 and 6000 µm (P < 0.05) proved to be significant risk factors for CNV. Conclusion. The use of quantitative variables in the determination of the OR of developing CNV allowed the establishment of significant risk factors for neovascularization. The long follow-up period and the innovative methodology reinforce the value of our results. This trial is registered with ClinicalTrials.gov NCT00801541.

Ocular Risk Factors for Exudative AMD: A Novel Semiautomated Grading System

Purpose. To evaluate the contribution of the ocular risk factors in the conversion of the fellow eye of patients with unilateral exudative AMD, using a novel semiautomated grading system. Materials and Methods. Single-center, retrospective study including 89 consecutive patients with unilateral exudative AMD and ≥3 years of followup. Baseline color fundus photographs were graded using an innovative grading software, RetmarkerAMD (Critical Health SA). Results. The follow-up period was 60.9 ± 31.3 months. The occurrence of CNV was confirmed in 42 eyes (47.2%). The cumulative incidence of CNV was 23.6% at 2 years, 33.7% at 3 years, 39.3% at 5 years, and 47.2% at 10 years, with a mean annual incidence of 12.0% (95% CI = 0.088-0.162). The absolute number of drusen in the central 1000 and 3000  μ m (P < 0.05) and the absolute number of drusen ≥125 µm in the central 3000 and 6000 µm (P < 0.05) proved to be significant risk factors for CNV. Conclusion. The use of quantitative variables in the determination of the OR of developing CNV allowed the establishment of significant risk factors for neovascularization. The long follow-up period and the innovative methodology reinforce the value of our results. This trial is registered with ClinicalTrials.gov NCT00801541.

Identifying wind power ramp causes from multivariate datasets: a methodological proposal and its application to reanalysis data.

Forecasting abrupt variations in wind power generation (the so-called ramps) helps achieve large scale wind power integration. One of the main issues to be confronted when addressing wind power ramp forecasting is the way in which relevant information is identified from large datasets to optimally feed forecasting models. To this end, an innovative methodology oriented to systematically relate multivariate datasets to ramp events is presented. The methodology comprises two stages: the identification of relevant features in the data and the assessment of the dependence between these features and ramp occurrence. As a test case, the proposed methodology was employed to explore the relationships between atmospheric dynamics at the global/synoptic scales and ramp events experienced in two wind farms located in Spain. The achieved results suggested different connection degrees between these atmospheric scales and ramp occurrence. For one of the wind farms, it was found that ramp events could be partly explained from regional circulations and zonal pressure gradients. To perform a comprehensive analysis of ramp underlying causes, the proposed methodology could be applied to datasets related to other stages of the wind-topower conversion chain.

Promoting oral interaction in the EFL classroom through the use of speaking activities

Este trabajo de investigación es sobre el uso de un folleto con actividades de expresión oral utilizados en una clase de Inglés de estudiantes de primer año del colegio "Integración Iberoamericano" y discute intereses de los estudiantes en desarrollo estas actividades para una interacción oral significativa entre (estudiantes y profesores) y (estudiantes-estudiantes). Además, este trabajo de investigacióntiene 5secciones: la primera secciónes una introducciónacerca de laimportancia de la comunicaciónen nuestra vidadiaria, la segunda secciónpresenta laliteratura, sección en la quese mencionandiferentesautores quepresentanalgunas perspectivassobreel desarrollo de comunicación oralen el EFL clase, así como en la tercera secciónse mencionala metodología utilizadadurante el desarrollodel trabajo de investigación. Por otra parte, en la cuarta secciónse presentaelanálisis de los datoscon los resultadosobtenidospor los participantesdespués de haber sido aplicado elfolleto conlasactividades de expresión oral, y, finalmente,en la quinta sección, se presentanlas conclusiones yrecomendacionesdespués de haberterminado el trabajo de investigación. Esimportante mencionarque el usode este folletoserá considerado como una opcióndiferente yuna metodología innovadoraque los futurosprofesores pueden utilizaren las clasescomo una herramientaútily significativa parael desarrollo deloshabilidades para hablar y una buena comunicación oral de los estudiantes.

Avaliação ambiental de manguezais adjacentes aos campos petrolíferos de Macau e Serra (RN), como subsídio às medidas mitigadoras ao processo erosivo

Among the various effects caused by the climate change and human intervention, the mangrove ecosystem changes through of the years has been worth mentioning, which hasn t known which are the pros and cons for the adjacent coastal and estuarine environments yet. It happens due to the present dynamism in these areas, besides of the difficult understanding of the processes associated with evolution. This study aimed to environmentally evaluate adjacent mangroves from the Macau and Serra oil fields, located on Rio Grande do Norte northern coast, to support the mitigating actions related to the containment of the erosive process, as well as, according to the principles of the Clean Development Mechanism (CDM), to assess the amount of atmospheric carbon sequestered by the studied ecosystem. An inventory was conducted through mangrouve mapping which has supplied this research, especially regarding to the structural characterization of mangrove areas. To understand the local mangrove behavior in a greater level detail, techniques of remote sensing, GIS and GPS were used to make an analogy between the current and past states of the mangrove studied, allowing to make anticipated projections for the future impacts or changes in that region. This study combined data from multispectral LANDSAT 5 TM, Landsat 7 ETM+ with radar microwave data from SAR RADARSAT-1, which increased the interpretation capacity of the data from optical sensor systems. The interpretations have been supported by the data field, representing a better and innovative methodology for the environmental and taxonomic characterization of mangrove forests considered. The results reveal that mangroves of the Ponta do Tubarão Sustainable Development Reserve are biologically representative areas and providing a variety of benefits, especially for local communities, constituting the priority sites for actions development aimed at conservation. They also have been showing the necessity to make mitigating measures in order to recover degraded areas through reforestation or creating new areas of mangrove, as currently 7.1% of the mangrove forests studied are dead or in an advanced state of decomposition. The amount of atmospheric carbon sequestered proved very significant when analyzed for the whole area, which is able to sequester atmospheric 4,294,458 Ton CO2 per year

Obtenção de álcool alílico (PROP-2-EN-1-OL) a partir da glicerina derivada do biodiesel de óleo de mamona

In this work, biodiesel was produced from castor oil that was a byproduct glycerin. The molar ratio between oil and alcohol, as well as the use of (KOH) catalyst to provide the chemical reaction is based on literature. The best results were obtained using 1 mol of castor oil (260g) to 3 moles of methyl alcohol (138g), using 1.0% KOH as catalyst at a temperature of 260 ° C and shaken at 120 rpm. The oil used was commercially available, the process involves the reaction of transesterification of a vegetable oil with methyl alcohol. The product of this reaction is an ester, biodiesel being the main product and the glycerin by-product which has undergone treatment for use as raw material for the production of allyl alcohol. The great advantage of the use of glycerin to obtain allyl alcohol is that its use eliminates the large amount of waste of the biodiesel and various forms of insult to the environment. The reactions for the formation of allyl alcohol was conducted from formic acid and glycerin in a ratio 1/1, at a temperature of 260oC in a heater blanket, being sprayed by a spiral condenser for a period of 2 hours and the product obtained contains mostly the allylic alcohol .. The monitoring of reactions was performed by UV-Visible Spectrophotometer: FTIR Fourier transform, the analysis showed that these changes occur spectrometer indicating the formation of the product allylic alcohol (prop-2-en-1-ol) in the presence of water, This alcohol was appointed Alcohol GL. The absorption bands confirms that the reaction was observed in (υ C = C) 1470 -1600 cm -1 and (υ CO), 3610-3670 attributed to C = C groups and OH respectively. The thermal analysis was carried out in a thermogravimetric analyzer SDT Q600, where the mass and temperature are displayed against time, that allows checking the approximate rate of heating. The innovative methodology developed in the laboratory (LABTAM, UFRN), was able to treat the glycerine produced by transesterification of castor oil and used as raw material for production of allyl alcohol, with a yield of 80%, of alcohol, the same is of great importance in the manufacture of polymers, pharmaceuticals, organic compounds, herbicides, pesticides and other chemicals

Innovative measurement methodology in the study of weathering of automotive coatings

An initial aim of this project was to evaluate the conventional techniques used in the analysis of newly prepared environmentally friendly water-borne automotive coatings and compare them with solvent-borne coatings having comparable formulations. The investigation was carried out on microtuned layers as well as on complete automotive multi-layer paint systems. Methods used included the very traditional methods of gloss and hardness and the commonly used photo-oxidation index (from FTIR spectral analysis). All methods enabled the durability to weathering of the automotive coatings to be initially investigated. However, a primary aim of this work was to develop methods for analysing the early stages of chemical and property changes in both the solvent-borne and water-borne coating systems that take place during outdoor natural weathering exposures and under accelerated artificial exposures. This was achieved by using dynamic mechanical analysis (DMA), in both tension mode on the microtomed films (on all depths of the coating systems from the uppermost clear-coat right down to the electron-coat) and bending mode of the full (unmicrotomed) systems, as well as MALDI-Tof analysis on the movement of the stabilisers in the full systems. Changes in glass transition temperature and relative cross-link density were determined after weathering and these were related to changes in the chemistries of the binder systems of the coatings after weathering. Concentration profiles of the UV-stabilisers (UVA and HALS) in the coating systems were analysed as a consequence of migration in the coating systems in separate microtomed layers of the paint samples (depth profiling) after weathering and diffusion co-efficient and solubility parameters were determined for the UV stabilisers in the coating systems. The methods developed were used to determine the various physical and chemical changes that take place during weathering of the different (water-borne and solvent-borne) systems (photoxidation). The solvent-borne formulations showed less changes after weathering (both natural and accelerated) than the corresponding water-borne formulations due to the lower level of cross-links in the binders of the water-borne systems. The silver systems examined were more durable than the blue systems due to the reflecting power of the aluminium and the lower temperature of the silver coatings.