Fabrication and Experimentation of a Cantilever Beam Based Piezoelectric Actuator and Sensor for Vibration Energy Harvesting

In the immediate surroundings of our daily life, we can find a lot of places where the energy in the form of vibration is being wasted. Therefore, we have enormous opportunities to utilize the same. Piezoelectric character of matter enables us to convert this mechanical vibration energy into electrical energy which can be stored and used to power other device, instead of being wasted. This work is done to realize both actuator and sensor in a cantilever beam based on piezoelectricity. The sensor part is called vibration energy harvester. The numerical analyses were performed for the cantilever beam using the commercial package ANSYS and MATLAB. The cantilever beam is realized by taking a plate and fixing its one end between two massive plates. Two PZT patches were glued to the beam on its two faces. Experiments were performed using data acquisition system (DAQ) and LABVIEW software for actuating and sensing the vibration of the cantilever beam.

Performance Enhancement of Piezoelectric Energy Harvesters Using Multilayer and Multistep Beam Configurations

Low-power requirements of contemporary sensing technology attract research on alternate power sources that can replace batteries. Energy harvesters absorb ambient energy and function as power sources for sensors and other low-power devices. Piezoelectric bimorphs have been demonstrating the preeminence in converting the mechanical energy in ambient vibrations into electrical energy. Improving the performance of these harvesters is pivotal as the energy in ambient vibrations is innately low. In this paper, we focus on enhancing the performance of piezoelectric harvesters through a multilayer and, in particular, a multistep configuration. Partial coverage of piezoelectric material in steps along the length of a cantilever beam results in a multistep piezoelectric energy harvester. We also discuss obtaining an approximate deformation curve for the beam with multiple steps in a computationally efficient manner. We find that the power generated by a multistep beam is almost 90% more than that by a multilayer harvester made out of the same volume of polyvinylidinefluoride ( PVDF), further corroborated experimentally. Improvements observed in the power generated prove to be a boon for weakly coupled low profile piezoelectric materials. Thus, in spite of the weak piezoelectric coupling observed in PVDF, its energy harvesting capability can be improved significantly using it in a multistep piezoelectric beam configuration.

Optimisation of a piezoelectric system for energy harvesting from traffic vibrations

Piezoelectric systems are viewed as a promising approach to energy harvesting from environmental vibrations. The energy harvested from real vibration sources is usually difficult to estimate analytically. Therefore, it is hard to optimise the associated energy harvesting system. This work investigates the optimisation of a piezoelectric cantilever system using a genetic algorithm based approach with numerical simulations. The genetic algorithm globally considers the effects of each parameter to produce an optimal frequency response to scavenge more energy from the real vibrations while the conventional sinusoidal based method can only optimise the resistive load for a given resonant frequency. Experimental acceleration data from the vibrations of a vehicle-excited manhole cover demonstrates that the optimised harvester automatically selects the right frequency and also synchronously optimises the damper and the resistive load. This method shows great potential for optimizing the energy harvesting systems with real vibration data. ©2009 IEEE.

Parametric resonance for vibration energy harvesting with design techniques to passively reduce the initiation threshold amplitude

A vibration energy harvester designed to access parametric resonance can potentially outperform the conventional direct resonant approach in terms of power output achievable given the same drive acceleration. Although linear damping does not limit the resonant growth of parametric resonance, a damping dependent initiation threshold amplitude exists and limits its onset. Design approaches have been explored in this paper to passively overcome this limitation in order to practically realize and exploit the potential advantages. Two distinct design routes have been explored, namely an intrinsically lower threshold through a pendulum-lever configuration and amplification of base excitation fed into the parametric resonator through a cantilever-initial-spring configuration. Experimental results of the parametric resonant harvesters with these additional enabling designs demonstrated an initiation threshold up to an order of magnitude lower than otherwise, while attaining a much higher power peak than direct resonance. © 2014 IOP Publishing Ltd.

Energy harvesting system design and optimization for wireless sensor networks

Wireless sensor networks (WSN) are becoming widely adopted for many applications including complicated tasks like building energy management. However, one major concern for WSN technologies is the short lifetime and high maintenance cost due to the limited battery energy. One of the solutions is to scavenge ambient energy, which is then rectified to power the WSN. The objective of this thesis was to investigate the feasibility of an ultra-low energy consumption power management system suitable for harvesting sub-mW photovoltaic and thermoelectric energy to power WSNs. To achieve this goal, energy harvesting system architectures have been analyzed. Detailed analysis of energy storage units (ESU) have led to an innovative ESU solution for the target applications. Battery-less, long-lifetime ESU and its associated power management circuitry, including fast-charge circuit, self-start circuit, output voltage regulation circuit and hybrid ESU, using a combination of super-capacitor and thin film battery, were developed to achieve continuous operation of energy harvester. Low start-up voltage DC/DC converters have been developed for 1mW level thermoelectric energy harvesting. The novel method of altering thermoelectric generator (TEG) configuration in order to match impedance has been verified in this work. Novel maximum power point tracking (MPPT) circuits, exploring the fractional open circuit voltage method, were particularly developed to suit the sub-1mW photovoltaic energy harvesting applications. The MPPT energy model has been developed and verified against both SPICE simulation and implemented prototypes. Both indoor light and thermoelectric energy harvesting methods proposed in this thesis have been implemented into prototype devices. The improved indoor light energy harvester prototype demonstrates 81% MPPT conversion efficiency with 0.5mW input power. This important improvement makes light energy harvesting from small energy sources (i.e. credit card size solar panel in 500lux indoor lighting conditions) a feasible approach. The 50mm × 54mm thermoelectric energy harvester prototype generates 0.95mW when placed on a 60oC heat source with 28% conversion efficiency. Both prototypes can be used to continuously power WSN for building energy management applications in typical office building environment. In addition to the hardware development, a comprehensive system energy model has been developed. This system energy model not only can be used to predict the available and consumed energy based on real-world ambient conditions, but also can be employed to optimize the system design and configuration. This energy model has been verified by indoor photovoltaic energy harvesting system prototypes in long-term deployed experiments.

Nonlinear piezoelectricity in electroelastic energy harvesters: Modeling and experimental identification

We propose and experimentally validate a first-principles based model for the nonlinear piezoelectric response of an electroelastic energy harvester. The analysis herein highlights the importance of modeling inherent piezoelectric nonlinearities that are not limited to higher order elastic effects but also include nonlinear coupling to a power harvesting circuit. Furthermore, a nonlinear damping mechanism is shown to accurately restrict the amplitude and bandwidth of the frequency response. The linear piezoelectric modeling framework widely accepted for theoretical investigations is demonstrated to be a weak presumption for near-resonant excitation amplitudes as low as 0.5 g in a prefabricated bimorph whose oscillation amplitudes remain geometrically linear for the full range of experimental tests performed (never exceeding 0.25% of the cantilever overhang length). Nonlinear coefficients are identified via a nonlinear least-squares optimization algorithm that utilizes an approximate analytic solution obtained by the method of harmonic balance. For lead zirconate titanate (PZT-5H), we obtained a fourth order elastic tensor component of c1111p =-3.6673× 1017 N/m2 and a fourth order electroelastic tensor value of e3111 =1.7212× 108 m/V. © 2010 American Institute of Physics.

‘Close as a kiss’: Gyn/Affection in Margaret Atwood’s The Penelopiad

Margaret Atwood’s novella The Penelopiad (2005) seemingly celebrates Penelope’s agency in opposition to Homer’s myth in The Odyssey. However, the twelve murdered maids steal the book to suggest the possibility of what Janice Raymond calls gyn/affection, a female bonding based on the logic of emotion that, in Atwood’s revision, verges on Kristevan abjection, the sinister and the fantastic, and serves a cathartic effect not only in the maids but also in the reader. This essay aims to question the generally accepted empowerment of Atwood’s Penelope and celebrates the murdered maids as the locus of emotion, where marginal aspects of gender and class merge to weave a powerful metaphorical tapestry of popular and traditionally feminized literary genres that, in plunging into and embracing the semiotic realm, ultimately solidify into an eclectic but compact alternative tradition of women’s writing and myth-making.

Vis-á-Vis-á-Vis. The Three-dimensional and artistic view of a problem

ANPO (A Non-predefined Outcome) is an an art-making methodology that employs structuralist theory of language (Saussure, Lacan, Foucault) combined with Hegel’s dialectic and the theory of creation of space by Lefebvre to generate spaces of dialogue and conversation between community members and different stakeholders. These theories of language are used to find artistic ways of representing a topic that community members have previously chosen. The topic is approached in a way that allows a visual, aural, performative and gustative form. To achieve this, the methodology is split in four main steps: step 1 ‘This is not a chair’, Step 2 ‘The topic’, Step 3 ‘ Vis-á-vis-á-vis’ and step 4. ‘Dialectical representation’ where the defined topic is used to generate artistic representations.The step 1 is a warm up exercise informed by the Rene Magritte painting ‘This is not a Pipe’. This exercise aims to help the participants to see an object as something else than an object but as a consequence of social implications. Step 2, participants choose a random topic and vote for it. The artist/facilitator does not predetermine the topic, participants are the one who propose it and choose it. Step 3, will be analysed in this publication and finally step 4, the broken down topic is taken to be represented and analysed in different ways. 

Étude de la cinétique de biomarqueurs d’exposition à la perméthrine dans des conditions d’exposition réelles chez les travailleurs agricoles au Québec

La perméthrine fait partie de la famille des pyréthrinoïdes qui sont abondamment utilisés en agriculture. Le but de cette étude était d'obtenir des données sur la cinétique des biomarqueurs d'exposition à la perméthrine en condition réelle d'exposition chez les travailleurs agricoles. Douze travailleurs (un applicateur, un superviseur et dix cueilleurs) exposés à la perméthrine dans le cadre de leur emploi ont été recrutés dans une ferme maraichère de la Montérégie (Québec). Ils ont fourni toutes leurs urines sur une période de trois jours suivant le début des travaux dans un champ traité. Les trois principaux métabolites de la perméthrine, l'acide cis-/trans-3-(2,2-dichlorovinyle)-2,2-diméthylecyclopropane carboxylique (cis-/trans-DCCA) et l'acide 3-phénoxybenzoïque (3-PBA) ont été analysés par chromatographie liquide à ultra-haute performance couplée à la spectrométrie de masse à temps de vol. Pour l'applicateur, une augmentation progressive des valeurs d'excrétion a été observée avec un pic unique atteint environ 30 h après le début de l'exposition d'une durée de 3,5 h suivi d'une élimination avec une demi-vie de 8 h. Pour le superviseur et l'un des cueilleurs, les profils d'excrétion de trans-DCCA et de 3-PBA étaient compatibles avec de multiples entrées dans la zone traitée pendant la période d'échantillonnage accompagné d'une élimination rapide entre les épisodes d'exposition.L'applicateur aurait été exposé indirectement par contact main-bouche, alors que les autres travailleurs auraient été exposés par la voie cutanée. Pour une surveillance biologique adéquate, nous recommandons de mesurer deux biomarqueurs de la perméthrine, soit le trans-DCCA et le 3-PBA et de prendre un minimum de trois échantillons urinaires, un avant et deux pendant ou suivant la période d'exposition.

Diagnóstico de las relaciones bilaterales entre Colombia y República Dominicana en torno al tema del narcotráfico desde 1998 hasta el 2010

El tema del narcotráfico ha sido ampliamente tratado, así como el caso de las drogas en Colombia, pero la afectación de dicho problema no ha sido analizada desde la República Dominicana y mucho menos desde la relación bilateral entre esta y Colombia. Aunque el tema es de gran relevancia en la agenda internacional, así como en la agenda interna de cada uno de estos Estados, no es el tema principal en la relación bilateral, donde los asuntos comerciales tienen mayor importancia, aún cuando hay ciertos mecanismos que buscan eliminar el tráfico ilegal de estupefacientes. En esta investigación, se busca dar un diagnóstico de las relaciones bilaterales y de aquellos instrumentos existentes, específicamente aquellos implementados desde la acogida internacional del término responsabilidad compartida en el año 1998 hasta el año 2010, para determinar la efectividad de los mismos y de aquellos factores que no son precisamente resultantes de las relaciones bilaterales pero que sí afectan de una u otra manera el tráfico de drogas ilegales entre estos dos países. Así, se buscará encontrar las debilidades, en los instrumentos bilaterales entre Colombia y República Dominicana y hacer recomendaciones para hacerlos más efectivos.

Self-organized sociopolitical interactions as the best way to achieve organized patterns in human social systems: going beyond the top-down control of classical political regimes

La monografía presenta la auto-organización sociopolítica como la mejor manera de lograr patrones organizados en los sistemas sociales humanos, dada su naturaleza compleja y la imposibilidad de las tareas computacionales de los regímenes políticos clásico, debido a que operan con control jerárquico, el cual ha demostrado no ser óptimo en la producción de orden en los sistemas sociales humanos. En la monografía se extrapola la teoría de la auto-organización en los sistemas biológicos a las dinámicas sociopolíticas humanas, buscando maneras óptimas de organizarlas, y se afirma que redes complejas anárquicas son la estructura emergente de la auto-organización sociopolítica.

La efectividad de la estrategia de seguridad del estado de Costa Rica en el subcomplejo de Seguridad Regional Centroamericano 2005-2010

El trabajo conceptualista la teoría de Complejos de Seguridad Regional, permitiendo tener una compresión amplia del mismo. Hace un análisis de la estrategia de seguridad costarricense, evocando momentos históricos para su construcción. Contextualiza las dinámicas de securitización generadas en Centro América y de esta forma concluye cómo Costa Rica ha respondido a estas dinámicas y qué tan efectivas fueron sus políticas en cuestiones de seguridad, al igual en cómo el subcomplejo se ve afectado por esta estrategia.