Estabilidade e adaptabilidade de híbridos de milho utilizando a abordagem AMMI-bayesiano

Biplot graphics are widely employed in the study of the genotypeenvironment interactions, but they are only a graphical tool without a statistical hypothesis test. The singular values and scores (singular vectors) used in biplots correspond to specific estimates of its parameters, and the use of uncertainty measures may lead to different conclusions from those provided by a simple visual evaluation. The aim of this work is to estimate the genotype-environment interactions, using AMMI analysis, through Bayesian approach. Therefore the credibility intervals can be used for decision-making in different situations of analyses. It allows to verify the consistency of the selection and recommendation of cultivars. Two analyses were performed. The first analysis looked into 10 regular commercial hybrids and all possible 45 hybrids obtained from them. They were assessed in 15 locations. The second analysis evaluated 28 hybrids in 35 different environments, with imbalance data. The ellipses were grouped according to the standard of interaction in the biplot. The AMMI analysis with a Bayesian approach proved to be a complete analysis of stability and adaptability, which provides important information that may help the breeder in their decisions. The regions of credibility, built in the biplots, allow to perform an accurate selection and a precise genotype recommendation, with a level of credibility. Genotypes and environments can be grouped according to the existing interaction pattern, which makes possible to formulate specific recommendations. Moreover the environments can be evaluated, in order to find out which ones contribute similarly to the interaction and those to be discarted. The method makes possible to deal with imbalanced data in a natural way, showing efficiency for multienvironment trials. The prediction takes into account instability and the interaction standard of the observed data, in order to establish a direct comparison between genotypes of both 1st and 2nd seasons.

Produtividade de linhagens unifloras e bifloras de ervilha (Pisum sativum L.) de vagens comestíveis em função da densidade de plantio

Pós-graduação em Agronomia (Horticultura) - FCA

Adubação nitrogenada e densidade de plantas para a máxima produtividade de milho e melhor retorno econômico na região sul do maranhão

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Potencial das populações Isanão-VF1 e Isanão-VD1 para seleção recorrente recíproca

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Origens dos cromossomos B em espécies de Characidium (Characiformes, Crenuchidae) baseada em pintura cromossômica, sequências de rDNA e histonas

Pós-graduação em Ciências Biológicas (Genética) - IBB

Herdabilidade em caracteres de crescimento de populações fragmentadas da espécie arbórea copaifera langsdorffii (fabaceae)

Pós-graduação em Agronomia - FEIS

Produtividade, estabilidade e adaptabilidade em progênies de eucalyptus urophylla s.t. blake

Pós-graduação em Agronomia - FEIS

Estimativas de herdabilidades em populações naturais contínuas e fragmentadas de araucaria angustifolia (bertol.) kuntze

Pós-graduação em Agronomia - FEIS

Diagnóstico de conflitos em áreas de preservação permanente na bacia do Rio Capivara - Botucatu (SP)

The permanent preservation areas (PPA) established by Brazilian law are there to protect the natural environment. With the expansion of space occupied by man and development of economic activities in these areas were engaged in conflicts characterized PPA, where the use is other than the natural vegetation. According to these paradigms work aims to raise these conflict areas in the River Basin Capivara, Botucatu (SP) with the help of GIS Ilwis 3.4, topographic maps of IBGE and satellite images CBERS 2B. The map was generated from PPA in the GIS by distance calculation in relation to drainage, springs and break line on Cuesta de Botucatu. The classes of land use and natural vegetation were determined by interpretation of satellite images and field visits to check their veracity. With the cutting of the map of land use and natural vegetation in relation to PPA unit it was determined that the total 44,63% PPA is in conflict occupied by pasture, forest plantation, orange, annual crops, farms and irrigated rice project in lowland. This diagnostic characterizes the degradation of the environment and highlights the need to harmonize the economic and urban development with the preservation of the environment to ensure sustainability of the region.

Correlations between yield and fruit quality characteristics of fresh market tomatoes

Genotypic, phenotypic and environmental correlations were estimated for all possible pairs among eleven characters of tomatoes. Fifteen treatments including five parents and ten hybrids of Instituto Agronômico (IAC) tomato breeding program were evaluated using a randomized complete block experimental design, with tree replications in Itatiba, São Paulo state, Brazil, during 2005/2006. The following traits were evaluated: fruit yield per plant (FP), fruit number per plant (FN), average fruit weight (FW), cluster number per plant (CN), fruit number per cluster (FC), number of locules per fruit (NL), fruit length (FL), fruit width (WI), fruit wall thickness (FT), total soluble solids (SS), and total titratable acidity (TA). The genotypic (rG), phenotypic (rF) and environmental correlations (rA) for two pairs of plant traits were estimated using the Genes© program. High similarity was found among the estimates of genotypic and phenotypic correlations. Positive and high phenotypic and genotypic correlations were observed between FP and the traits FN, FW and FT, and these associations contributed for yield increasing. FW and FT contributed to yield increase and should be considered together as primary yield components in tomato. Positive values of the genotypic and phenotypic correlations revealed that FP influenced FN with high direct effect and significant positive correlation. These traits may be included as the main selection criteria for tomato yield improvement.

Apomixia determinando a estrutura genética de uma população de Plinia cauliflora no sudoeste do Paraná

CAPES

Selection between and within full-sib sugarcane families using the modified BLUPIS method (BLUPISM).

2016

Juvenile-mature genetic correlations in Pinus taeda clones propagated via somatic embryogenesis.

Objetivou-se com o presente trabalho, estimar a correlação genética entre idades de seleção (juvenil-adulta) e eficiência da seleção precoce para as características altura, diâmetro e volume de indivíduos de famílias de Pinus taeda propagados via embriogênese somática. O estudo foi realizado por meio de análise genético-estatística pelo procedimento de estimação de componentes de variância (Reml) e de predição de valores genéticos (Blup), usando-se o software Selegen-Reml/Blup. As correlações genéticas entre idades juvenis e idade de rotação foram realizadas aplicando o modelo linear desenvolvido por Lambeth (1980). Segundo os resultados do modelo estabelecido, a seleção precoce pode ser realizada em clones de Pinus taeda com alta eficiência de seleção. As idades de 4 a 6 anos são suficientes para selecionar clones de Pinus taeda propagados via embriogênese somática para colheita aos 8 e 12 anos e, as idades de 6 a 10 anos são suficientes para selecionar para colheita aos 20 anos. De acordo com as estimativas de correlação genotípicaa partir dos ambientes, a seleção de clones de Pinus taeda propagados via embriogênese somática deve ser praticada de forma específica para cada ambiente. Pode-se realizar a seleção de clones considerando o diâmetro, visto a alta correlação observada entre volume e diâmetro.

Predictive ability of Genomic Estimated Family Values (GEFV).

Genomic selection (GS) has been used to compute genomic estimated breeding values (GEBV) of individuals; however, it has only been applied to animal and major plant crops due to high costs. Besides, breeding and selection is performed at the family level in some crops. We aimed to study the implementation of genome-wide family selection (GWFS) in two loblolly pine (Pinus taeda L.) populations: i) the breeding population CCLONES composed of 63 families (5-20 individuals per family), phenotyped for four traits (stem diameter, stem rust susceptibility, tree stiffness and lignin content) and genotyped using an Illumina Infinium assay with 4740 polymorphic SNPs, and ii) a simulated population that reproduced the same pedigree as CCLONES, 5000 polymorphic loci and two traits (oligogenic and polygenic). In both populations, phenotypic and genotypic data was pooled at the family level in silico. Phenotypes were averaged across replicates for all the individuals and allele frequency was computed for each SNP. Marker effects were estimated at the individual (GEBV) and family (GEFV) levels with Bayes-B using the package BGLR in R and models were validated using 10-fold cross validations. Predicted ability, computed by correlating phenotypes with GEBV and GEFV, was always higher for GEFV in both populations, even after standardizing GEFV predictions to be comparable to GEBV. Results revealed great potential for using GWFS in breeding programs that select families, such as most outbreeding forage species. A significant drop in genotyping costs as one sample per family is needed would allow the application of GWFS in minor crops.

Divergência genética entre progênies de polinização aberta de Pinus caribaea var. hondurensis a partir de caracteres quantitativos.

Este trabalho foi realizado com o objetivo de estimar a divergência genética entre progênies de Pinus caribaea var. hondurensis, por meio de caracteres quantitativos. O experimento foi instalado em delineamento látice 10 x 10, triplo, com 100 tratamentos (96 progênies oriundas de polinização aberta de um pomar clonal da espécie e quatro testemunhas). Foram avaliados os caracteres: diâmetro a 1,30 m do solo, altura total de planta, volume cilíndrico, produção de resina total e resina por área de painel. Utilizou-se a distância generalizada de Mahalanobis (D2) e o método de otimização de Tocher. A maior distância genética observada entre as progênies foi de 100% (D2 = 65,51) e a menor foi de 0,09% (D2 = 0,15). O caractere volume foi o que mais contribuiu para a divergência genética entre os grupos avaliados. O agrupamento a partir do método de otimização de Tocher possibilitou a separação das progênies em quatro grupos, com concentração de 96,9% das progênies em um único grupo. Para que estas progênies possam ser incluídas em programas de melhoramento genético para produção de resina e madeira, cruzamentos controlados deverão ser priorizados entre indivíduos mais produtivos, que apresentaram maior divergência genética.