Incrustação em poço produtor de petróleo e gás natural: um estudo de caso

Water and gas is a common by - product of the oil production process. Production may be compromised by the precipitation of inorganic salts in both the reservoir and producing well, through scale formation. This precipitation is likely the cause of the formation damage. High temperatures and h igh pressures (HTHP) may favor the precipitation of insoluble salts. The most common types of scale in oil fields are calcium carbonate and calcium sulphate, strontium and barium sulphate. New types of scale formation have attracted special attention such as zinc sulphide and lead. This precipitation may occur in the pores of reservoir rocks, in the production string and in equipment, causing obstructions and consequent production losses. In this study, the influence of well depth on incrustation compositio n was investigated to design removal treatments and assess the behavior of these deposits along the string, through the analysis of pressure and temperature. Scale residues were recovered from the inside of the production string of an oil and gas well duri ng the string removal operation. A total of 10 samples from different depths (15.4 m to 4061.5 m) were obtained. Initially a dissolution test was conducted in weak acid, similar to that used in removal operations with this type of scale formation. Majority composition was defined and confirmed by dissolution tests using X - Ray Fluorescence Spectroscopy (XRF), X - Ray Diffraction (XRD) and Scanning Electron Microscope (SEM) techniques. Residues with distinct characteristics were observed in different proportion s, showing a tendency toward increased and/or decreased mass with depth. In the samples closest to the surface, typical sandstone residues were found, with calcium (45% Ca) as the metal of highest concentration. The obtained results indicate correlations o f the scale types studied with the depth and, consequently, with the thermodynamic conditions of pressure and temperature.

Os limites constitucionais ao exercício de direito de patente e seus reflexos na indústria do petróleo, gás natural e biocombustíveis

This dissertation deals with the constitutional limits on the exercise of patent rights and its effects on the oil, natural gas and biofuels. Held with the support of ANP / PETROBRAS, It seeks to show how the law will limit the exercise of industrial property, based on a reinterpretation of private law by the constitutional development perspective . Today it is a fact that Petrobras, a Brazilian joint venture, has the latest technology in various sectors of the oil industry, and is one of the highest investments in developing new technologies. The overall objective of this thesis is to establish the relationship between the public interest of the Petroleum Industry, Natural Gas and Biofuels and constitutional limits to the free exercise of patent rights, then confirm or refute our hypothesis that Article 71 on Industrial Property Law is contrary to the existing objectives in Article 3 of the Constitution of the Federative Republic of Brazil. The research aims to examine the relevant aspects of the legal nature attributed to IPGN constitutionally confronting the constitutional limits on the free exercise of patent rights, with the purpose to outline the state of the performance limits in the regulation of the economy, in particular the application of feasibility limitations on the right of property in favor of national interest on the strategic energy industry. The aim is to confront the fundamental rights to property and economic development, against the public interest, limiting these first. As to the objectives, the research will be theoretical and descriptive and harvest of industrial property, respect the possible impact of regulatory standards and limiting the right of ownership in the oil industry. To establish how the state will mitigate the intellectual property right, we discuss, at first, a definition of public interest from the general theory of state and sovereign character in order to establish a new concept of national interest and popular interest, which will in turn the definition of our concept of public interest. In the second phase, will be addressed the issue of industrial property rights and how to will be free exercise thereof, in the constitutional sphere, infra, and demonstrating the use of industrial property rights with examples of market and IPGN . After situating the industrial property rights in the constitution and national legislation, establish their relationship with the national and regional development, will be addressed in this chapter in particular the patent law, as most usual form of intellectual property protection in IPGN. Used a study highlighting the number of patents in the area of the analyzed industry, demonstrating with hard data the importance of a sector for industrial development. The relationship between the social function of intellectual property and the constitutional objective of development was characterized to demonstrate the strategic nature of oil to Brazil in the national and international scene, and put into question the hypothesis of the research which provides that even with large investments the lack of legal certainty in the sector turns out not to have a considerable volume of investment as it could.

Estudo da absorção das espécies pesadas do gás natural em octanol: efeitos da temperatura e vazão

In the oil industry, natural gas is a vital component of the world energy supply and an important source of hydrocarbons. It is one of the cleanest, safest and most relevant of all energy sources, and helps to meet the world's growing demand for clean energy in the future. With the growing share of natural gas in the Brazil energy matrix, the main purpose of its use has been the supply of electricity by thermal power generation. In the current production process, as in a Natural Gas Processing Unit (NGPU), natural gas undergoes various separation units aimed at producing liquefied natural gas and fuel gas. The latter should be specified to meet the thermal machines specifications. In the case of remote wells, the process of absorption of heavy components aims the match of fuel gas application and thereby is an alternative to increase the energy matrix. Currently, due to the high demand for this raw gas, research and development techniques aimed at adjusting natural gas are studied. Conventional methods employed today, such as physical absorption, show good results. The objective of this dissertation is to evaluate the removal of heavy components of natural gas by absorption. In this research it was used as the absorbent octyl alcohol (1-octanol). The influence of temperature (5 and 40 °C) and flowrate (25 and 50 ml/min) on the absorption process was studied. Absorption capacity expressed by the amount absorbed and kinetic parameters, expressed by the mass transfer coefficient, were evaluated. As expected from the literature, it was observed that the absorption of heavy hydrocarbon fraction is favored by lowering the temperature. Moreover, both temperature and flowrate favors mass transfer (kinetic effect). The absorption kinetics for removal of heavy components was monitored by chromatographic analysis and the experimental results demonstrated a high percentage of recovery of heavy components. Furthermore, it was observed that the use of octyl alcohol as absorbent was feasible for the requested separation process.

Estudo da absorção das espécies pesadas do gás natural em octanol: efeitos da temperatura e vazão

In the oil industry, natural gas is a vital component of the world energy supply and an important source of hydrocarbons. It is one of the cleanest, safest and most relevant of all energy sources, and helps to meet the world's growing demand for clean energy in the future. With the growing share of natural gas in the Brazil energy matrix, the main purpose of its use has been the supply of electricity by thermal power generation. In the current production process, as in a Natural Gas Processing Unit (NGPU), natural gas undergoes various separation units aimed at producing liquefied natural gas and fuel gas. The latter should be specified to meet the thermal machines specifications. In the case of remote wells, the process of absorption of heavy components aims the match of fuel gas application and thereby is an alternative to increase the energy matrix. Currently, due to the high demand for this raw gas, research and development techniques aimed at adjusting natural gas are studied. Conventional methods employed today, such as physical absorption, show good results. The objective of this dissertation is to evaluate the removal of heavy components of natural gas by absorption. In this research it was used as the absorbent octyl alcohol (1-octanol). The influence of temperature (5 and 40 °C) and flowrate (25 and 50 ml/min) on the absorption process was studied. Absorption capacity expressed by the amount absorbed and kinetic parameters, expressed by the mass transfer coefficient, were evaluated. As expected from the literature, it was observed that the absorption of heavy hydrocarbon fraction is favored by lowering the temperature. Moreover, both temperature and flowrate favors mass transfer (kinetic effect). The absorption kinetics for removal of heavy components was monitored by chromatographic analysis and the experimental results demonstrated a high percentage of recovery of heavy components. Furthermore, it was observed that the use of octyl alcohol as absorbent was feasible for the requested separation process.

Exploração de gás natural na bacia do rio São Francisco

Consultoria Legislativa - Área XII - Recursos Minerais, Hídricos e Energéticos.

O setor de gás natural no mundo

Consultoria Legislativa - Área XII - Recursos Minerais, Hídricos e Energéticos.

Evolução da produção, reservas e dos preços do petróleo, gás natural e biocombustíveis: a importância dos biocombustíveis no cenário mundial

Este trabalho tem como objetivo estudar a indústria do petróleo, gás natural e biocombustíveis no contexto brasileiro e no mundial. Visa também analisar as vantagens e desvantagens dos biocombustíveis e seu possível impacto na indústria do petróleo, assim como os principais indicativos e projeções da indústria do petróleo, como reserva, produção, preço e consumo, através de coleta de dados e geração de gráficos pesquisados e comparados de grandes agências e empresas de energia. Os biocombustíveis podem ser um grande aliado da indústria do petróleo tendo em vista a duração das reservas mundiais de hidrocarbonetos. O uso dos biocombustíveis implicará no desenvolvimento de tecnologias renováveis e de reutilização de materiais antes descartados, trazendo benefício a toda sociedade. A indústria do petróleo é impactada pelas flutuações no mercado internacional e pela demanda, assim como pela manipulação da produção de combustíveis fósseis pelos países produtores. Esses aspectos apresentados interligados criam uma complexa indústria que a presente dissertação se propõe a analisar.

Avaliação de Correlações e Equações de Estado para Determinação de Fatores de Compressibilidade de Gás Natural

O fator de compressibilidade (Z) de gás natural é utilizado em vários cálculos na engenharia de petróleo (avaliação de formações, perda de carga em tubulações, gradiente de pressão em poços de gás, cálculos de balanço de massa, medição de gás, compressão e processamento de gás). As fontes mais comuns de valores de Z são medições experimentais, caras e demoradas. Essa propriedade também é estimada por correlações empíricas, modelos baseados no princípio dos estados correspondentes ou equações de estado (EOS). Foram avaliadas as capacidades das EOS de Soave-Redlich-Kwong (SRK), Peng-Robinson (PR), Patel-Teja (PT), Patel-Teja-Valderrama (PTV), Schmidt-Wenzel (SW), Lawal-Lake-Silberberg (LLS) e AGA-8 para previsão desta propriedade em aproximadamente 2200 pontos de dados experimentais. Estes pontos foram divididos em quatro grupos: Grupo 1 (Presença de frações C7+, Grupo 2 (temperaturas inferiores a 258,15 K), Grupo 3 (pressões superiores a 10000 kPa) e Grupo 4 (pressões inferiores a 10000 kPa). Os cálculos utilizando as equações de estado sob diferentes esquemas de previsão de coeficientes binários de interação foram cuidadosamente investigados. Os resultados sugerem que a EOS AGA-8 apresenta os menores erros para pressões de até 70000 kPa. Entretanto, observou-se uma tendência de aumento nos desvios médios absolutos em função das concentrações de CO2 e H2S. As EOS PTV e a EOS SW são capazes de predizer o fator de compressibilidade (Z) com desvios médios absolutos entre os valores calculados e experimentais com precisão satisfatória para a maioria das aplicações, para uma variada faixa de temperatura e pressão. Este estudo também apresenta uma avaliação de 224 métodos de cálculo de Z onde foram utilizadas 8 correlações combinadas com 4 regras de mistura para estimativa de temperaturas e pressões pseudorreduzidas das amostras, junto com 7 métodos de caracterização das propriedades críticas da fração C7+, quando presente na composição do gás. Em função dos resultados são sugeridas, para diferentes tipos de sistemas, as melhores combinações de correlações com regras de mistura capazes de predizer fatores de compressibilidade (Z) com os menores erros absolutos médios relativos