Re-examining the U.K.'s greatest tornado outbreak: forecasting the limited extent of tornadoes along a cold front

On 23 November 1981, a strong cold front swept across the U.K., producing tornadoes from the west to the east coasts. An extensive campaign to collect tornado reports by the Tornado and Storm Research Organisation (TORRO) resulted in 104 reports, the largest U.K. outbreak. The front was simulated with a convection-permitting numerical model down to 200-m horizontal grid spacing to better understand its evolution and meteorological environment. The event was typical of tornadoes in the U.K., with convective available potential energy (CAPE) less than 150 J kg-1, 0-1-km wind shear of 10-20 m s-1, and a narrow cold-frontal rainband forming precipitation cores and gaps. A line of cyclonic absolute vorticity existed along the front, with maxima as large as 0.04 s-1. Some hook-shaped misovortices bore kinematic similarity to supercells. The narrow swath along which the line was tornadic was bounded on the equatorward side by weak vorticity along the line and on the poleward side by zero CAPE, enclosing a region where the environment was otherwise favorable for tornadogenesis. To determine if the 104 tornado reports were plausible, first possible duplicate reports were eliminated, resulting in as few as 58 tornadoes to as many as 90. Second, the number of possible parent misovortices that may have spawned tornadoes is estimated from model output. The number of plausible tornado reports in the 200-m grid-spacing domain was 22 and as many as 44, whereas the model simulation was used to estimate 30 possible parent misovortices within this domain. These results suggest that 90 reports was plausible.

On the extent of star countable spaces

For a topological property P, we say that a space X is star Pif for every open cover Uof the space X there exists Y aS, X such that St(Y,U) = X and Y has P. We consider star countable and star Lindelof spaces establishing, among other things, that there exists first countable pseudocompact spaces which are not star Lindelof. We also describe some classes of spaces in which star countability is equivalent to countable extent and show that a star countable space with a dense sigma-compact subspace can have arbitrary extent. It is proved that for any omega (1)-monolithic compact space X, if C (p) (X)is star countable then it is Lindelof.

THE EXTENT OF MULTIDISCIPLINARY AUTHORSHIP OF ARTICLES ON SCIENTOMETRICS AND BIBLIOMETRICS IN BRAZIL

The publications in scientometrics and bibliometrics with Brazilian authorship expanded exponentially in the 1990-2006 period, reaching 13 times in the Web of Science database and 19.5 times in the Google Scholar database. This increase is rather superior to that of the total Brazilian scientific production in the same time period (5.6 times in the Web of Science). Some characteristics to be noticed in this rise are: 1) The total number of articles during this period was 197; in that, 78% were published in 57 Brazilian journals and 22% in 13 international journals. 2) The national and international articles averaged 4.3 and 5.9 citations/article, respectively; two journals stood out among these, the national Ciencia da Informacao (44 articles averaging 6.7 citations/article) and the international Scientometrics (32 articles averaging 6.2 citations/article). 3) The articles encompass an impressive participation of authors from areas other than information science; only one-fourth of the authors are bound to the information science field, the remaining ones being distributed among the areas of humanities/business administration, biology/biomedicine, health and hard sciences. The occurrence of adventitious authors at this level of multidisciplinarity is uncommon in science. However, the possible benefits of such patterns are not clear in view of a fragmented intercommunication among the authors, as noticed through the citations. The advantages of changing this trend and of using other scientometric and bibliometric databases, such as SciELO, to avoid an almost exclusive use of the Web of Science database, are discussed.

Effect of polymerization and accelerated aging on iris color stability of ocular prosthesis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

THE EXTENT of SEED PREDATION BY BRUCHINE BEETLES (COLEOPTERA: CHRYSOMELIDAE: BRUCHINAE) IN A HETEROGENEOUS LANDSCAPE IN SOUTHEASTERN BRAZIL

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

DNA Psi-condensation and reentrant decondensation: Effect of the PEG degree of polymerization

psi-Condensation of DNA fragments of about 4 kbp was induced by poly(ethylene glycol) (PEG), with degrees of polymerization ranging from 45 to 182, and univalent salt (NaCl). Using circular dichroism spectroscopy, we were able to accurately determine the critical amount of PEG needed to induce condensation, as a function of the NaCl concentration. A significant dependence on the PEG degree of polymerization was found. Phase boundaries determined for the multimolecular condensation were very similar to those observed previously for the monomolecular collapse, with two asymptotic regimes at low and high salt concentrations. We analyze our data using a theoretical model that properly takes into account both the polyelectrolyte nature of the DNA and the liquid crystallinity of the condensed phase. The model assumes that all PEG is excluded from the condensates and shows reentrant decondensation only at low salt. We also systematically study reentrant decondensation and find a very strong dependence on PEG molecular weight. At low PEG molecular weight, decondensation occurs at relatively low concentrations of PEG, and over a wide range of salt concentrations. This suggests that in the reentrant decondensation the flexible polymers used are not completely excluded from the condensed phase.

The effect of polymerization cycles on porosity of microwave-processed denture base resin

Statement of problem. Although most of the physical properties of denture base resin polymerized by microwave energy have been shown to be similar to resins polymerized by the conventional heat polymerization method, the presence of porosity is a problem.Purpose. This study evaluated the effect of different microwave polymerization cycles on the porosity of a denture base resin designed for microwave polymerization.Material and methods. Thirty-two rectangular resin specimens (65 X 40 X 5 mm) were divided into 3 experimental groups (A, B, and C; Onda-Cryl, microwave-polymerized resin) and I control group (T; Classico, heat-polymerized resin), according to the following polymerization cycles: (A) 500 W for 3 minutes, (B) 90 W for 13 minutes + 500 W for 90 seconds, (C) 320 W for 3 minutes + 0 W for 4 minutes + 720 W for 3 minutes, and (T) 74degreesC for 9 hours. Porosity was calculated by measurement of the specimen volume before and after its immersion in water. Data were analyzed using 1-way analysis of variance (alpha = .05).Results. The mean values and SDs of the percent mean porosity were: A = 1.05% +/- 0.28%, B = 0.91% +/- 0.15%, C = 0.88% +/- 0.23%, T = 0.93% +/- 0.23%. No significant differences were found in mean porosity among the groups evaluated.Conclusion. Within the limitations of this study, a denture base resin specifically designed for microwave Polymerization tested was not affected by different polymerization cycles. Porosity was similar to the conventional heat-polymerized denture base resin tested.

Influence of polymerization on the synthesis of SrTiO3: Part I. Characteristics of the polymeric precursors and their thermal decomposition

The influence of polymerization on the thermal decomposition of polymeric precursors and phase formation was investigated during synthesis of SrTiO3. The precipitation of polymeric precursor in acetone produced a more thermal stable precursor with lower weight loss during decomposition. This more stable precursor retarded the formation of the SrTiO3 phase. From thermal analysis, XRD and FT-IR the presence of an intermediate phase during decomposition of the precursors was observed. This is a mixed (Sr,Ti) carbonate phase with the proposed composition of Sr2Ti2O5.CO3. © 1995.

Influence of polymerization on the synthesis of SrTiO3: Part II. Particle and agglomerate morphologies

Morphologies of SrTiO3 particles and agglomerates synthesized by the traditional Pechini route and by the polymer precipitation route were characterized by the nitrogen adsorption/desorption technique and by transmission electron microscopy (TEM). A cluster structure of nanometric particles forming large agglomerates which are broken during pressing followed by cluster rearrangement was observed. The mean particle size is larger for SrTiO3 obtained by the Pechini route and is related to the precursor thermal decomposition and particle growth during calcination. The particle growth is controlled by neck growth among particles and further motion of the particle boundary. © 1995.

Analysis of polymerization time on abrasive wear of dental resins

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of ceramic shade on the degree of conversion of a dual-cure resin cement analyzed by FTIR

Objectives: The aim of this research was to evaluate the degree of monomer conversion of different resin cement shades when photocured under different feldspathic ceramic shades. The photocuring time was also evaluated as well as the translucency of each ceramic shade. Methods: Three VITA VM7 ceramic shades (Base Dentin 0M1, Base Dentin 2M2 and Base Dentin 5M3) were used to determine the translucency percentage. A spectrophotometer MiniScan was used to measure the opacity percentage of each specimen (2-mm-thick) and then the translucency was calculated. To measure the degree of conversion (DC), the resin cement (Variolink II; A3 Yellow and transparent) specimens (thickness: 100 μm) were photocured under a ceramic block (2-mm-thick) for 20 or 40 s. Specimens photocured without the ceramic block were used as control. Sixteen groups (n = 3) were evaluated. Micro-ATR/FTIR spectrometry was used to evaluate the extent of polymerization of all specimens after 24 h. The %DC was calculated of experimentally polymerized versus maximally polymerized composite. Results: The translucency percentages of 0M1, 2M2 and 5M3 ceramics were 12.41 (1.02)%, 5.75 (1.91)% and 1.07 (0.03)%, respectively. The %DC of both resin cement shades cured under ceramic 5M3 was significantly lower than the other groups (p < 0.05). The %DC of 0M1 groups exhibited no significant difference from 2M2 groups (p > 0.05), with the exception of the transparent cement photocured for 40 s. Conclusion: Photocuring under 2 mm ceramic showed that the increase in chroma saturation significantly decreased Variolink II resin cement %DC (100-μm-thick). © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Relationship between race and clinical characteristics, extent of disease, and response to chemotherapy in patients with low-risk gestational trophoblastic neoplasia

Objective. To evaluate the potential effects of race on clinical characteristics, extent of disease, and response to chemotherapy in women with postmolar low-risk gestational trophoblastic neoplasia (GTN).Methods. This non-concurrent cohort study was undertaken including patients with FIGO-defined postmolar low-risk GTN treated with comparable doses and schedules of chemotherapy at the New England Trophoblastic Disease Center (NETDC) between 1973 and 2012. Racial groups investigated included whites, African American and Asians. Information on patient characteristics and response to chemotherapy (need for second line chemotherapy, reason for changing to an alternative chemotherapy, number of cycles/regimens, need for combination chemotherapy, and time to hCG remission) was obtained.Results. Of 316 women, 274 (86.7%) were white, 19 (6%) African American, and 23 (7.3%) Asian. African Americans were significantly younger than white and Asian women (p = 0.008). Disease presentation, and extent of disease, including antecedent molar histology, median time to persistence, median hCG level at persistence, rate of D&C at persistence, presence of metastatic disease, and FIGO stage and risk score were similar among races. Need for second line chemotherapy (p = 0.023), and median number of regimens (p = 0.035) were greater in Asian women than in other races.Conclusions. Low-risk GTN was more aggressive in Asian women, who were significantly more likely to need second line chemotherapy and a higher number of chemotherapy regimens to achieve complete remission than women of African American and Asian descent. Further studies involving racial differences related to clinical, biological and environmental characteristics are needed. (C) 2015 Published by Elsevier Inc.

Site and extent of amino acid digestion in dairy cattle fed with corn and its byproducts

The study was conducted to evaluated the site and extent of dry matter (DM), crude protein (CP), methionine (Met), lysine (Lys), and threonine (Thr) digestion of corn and byproducts obtained from corn germ mixed with different amounts of extruded or non-extruded ether extract (EE) in dairy cattle. Treatments consisted in eight types of feed and two processing in a 4 x 2 factorial design. There were four feeds: corn grain cracked (Corn), corn germ meal with 1% EE (CG1), corn germ meal with 7% EE (CG7), and corn germ meal with 10% EE (CG10). The feeds were processed in one of two ways: extruded (Ex) and not extruded. In situ techniques were used to determine DM, CP, Met, Lys, and Thr partial and total tract digestion. A basic diet was compounded of corn germ meal, soybean meal and coastcross hay in a 70: 30 roughage to concentrate ratio. There was no interaction (P>0.05) between feeds and processing method. Extrusion improved (P<0.05) total tract digestibility of corn DM but not CP. Intestinal digestibility was similar (P>0.05) for corn and corn germ meal mixed with 7 and 10% EE, regardless of EE processing method. The CP total tract digestibility of corn germ meal with 1% non-extruded EE was 16.62% higher (P<0.05) than that of the extruded form. The best total CP digestibility was obtained for corn germ meal with 7% EE, independently of the processing method. The effects of EE processing method on partial and total digestibility differed between amino acid. Corn and corn byproduct extrusion may improve dry matter digestibility, but do not necessarily influence crude protein digestion. Ruminal and intestinal digestibility of Met, Lys, and Thr depends on both feed type and processing method. Therefore, amino acid availability should be considered individually.