Malaria control in an agro-industrial settlement of Rondônia (Western Amazon Region, Brazil)

A malaria control pilot project was developed in the Urupá agro-industrial farm that is situated in the State of Rondônia (Western Amazon Region, Brazil). Around 180 inhabitants had been surveyed for the past five years. The control measures were based on (1) training a community agent to perform on the spot microscopical diagnosis of malaria and to treat the uncomplicated cases of malaria; (2) limiting the use of insecticides to a short period before the high transmission season. This resulted in a significant reduction in the time between the onset of clinical symptoms and specific chemotherapy which fell from 3.5 to 1.3 days. In relation to the previous three reference years the total number of malaria cases was reduced to 50% in the first year and to 25% in the second year. The introduction of these measures coincided with pronounced reduction in the frequency of Plasmodium falciparum infections but this was less marked for P. vivax infections. In the second year of the pilot experiment there was no P. falciparum transmission on the farm. During the last decade there was a general decrease in the endemicity of malaria in the State of Rondônia. The linear regression coefficient values indicate that the decline was more pronounced in Urupá than in the general municipality and that the falciparum malaria API in Urupá farm is significantly lower than in the general municipality of Candeias were the farm is situated.

Interfície de control de una línia industrial automatitzada

Estudi seriós sobre les interfícies gràfiques destinades al sector industrial. En aquest sentit, s'analitza el perfil d'usuari o usuaris més freqüent en aquest sector (les seves característiques i les seves necessitats), es presenten i es descriuen diverses pautes de disseny i diversos elements gràfics que compleixen una sèrie de requisits predefinits, es procedeix a fer un muntatge d'exemple presentant una sèrie de pantalles (se n'explica i justifica el funcionament) i, per acabar, es proposa un mètode per a fer la validació del disseny, mètode que pot comportar modificacions sobre el disseny inicial.

Rehabilitació i control d'un manipulador industrial

El grup de visió per computadora de la Universitat de Girona, disposava d’un manipulador lineal com a sistema de posicionament, per poder inspeccionar mitjançant visió artificial, la superfície de diverses peces. El control es realitzava a partir d’un PLC, controlant la posició de la plataforma de posicionament a partir d’un servomotor, un servocontrolador i una targeta d’entrada i sortida de polsos. Es pretén la recuperació d’aquest sistema de posicionament lineal a partir de la recopilació de la informació inicial. El nou ús serà enfocat al posicionament i a la classificació de diversos elements. D’aquesta forma es podrà estudiar el funcionament d’un servomotor governat per un servodriver i una targeta d’entrada i sortida de polsos i s’utilitzarà com a element didàctic per a la universitat. Es complementarà la documentació disponible i s’elaborarà informació tècnica

Informed Control Over Inputs and Extent of Industrial Processing, June 2005

Stylized facts regarding the industrial process include emphases on obtaining information about and control over the quality of raw materials. We provide a model that establishes conditions under which informed control involves ensuring uniformity in inputs and increased uniformity encourages more extensive processing. We show when the Boltzmann-Shannon entropy statistic is an appropriate measure of uniformity.

Model-based objects recognition in industrial environments for autonomous vehicles control

Behavior-based navigation of autonomous vehicles requires the recognition of the navigable areas and the potential obstacles. In this paper we describe a model-based objects recognition system which is part of an image interpretation system intended to assist the navigation of autonomous vehicles that operate in industrial environments. The recognition system integrates color, shape and texture information together with the location of the vanishing point. The recognition process starts from some prior scene knowledge, that is, a generic model of the expected scene and the potential objects. The recognition system constitutes an approach where different low-level vision techniques extract a multitude of image descriptors which are then analyzed using a rule-based reasoning system to interpret the image content. This system has been implemented using a rule-based cooperative expert system

Position sensorless electrically excited synchronous motor drive for industrial use based on direct flux linkage and torque control

Synchronous machines with an AC converter are used mainly in large drives, for example in ship propulsion drives as well as in rolling mill drives in steel industry. These motors are used because of their high efficiency, high overload capacity and good performance in the field weakening area. Present day drives for electrically excited synchronous motors are equipped with position sensors. Most drives for electrically excited synchronous motors will be equipped with position sensors also in future. This kind of drives with good dynamics are mainly used in metal industry. Drives without a position sensor can be used e.g. in ship propulsion and in large pump and blower drives. Nowadays, these drives are equipped with a position sensor, too. The tendency is to avoid a position sensor if possible, since a sensor reduces the reliability of the drive and increases costs (latter is not very significant for large drives). A new control technique for a synchronous motor drive is a combination of the Direct Flux Linkage Control (DFLC) based on a voltage model and a supervising method (e.g. current model). This combination is called Direct Torque Control method (DTC). In the case of the position sensorless drive, the DTC can be implemented by using other supervising methods that keep the stator flux linkage origin centered. In this thesis, a method for the observation of the drift of the real stator flux linkage in the DTC drive is introduced. It is also shown how this method can be used as a supervising method that keeps the stator flux linkage origin centered in the case of the DTC. In the position sensorless case, a synchronous motor can be started up with the DTC control, when a method for the determination of the initial rotor position presented in this thesis is used. The load characteristics of such a drive are not very good at low rotational speeds. Furthermore, continuous operation at a zero speed and at a low rotational speed is not possible, which is partly due to the problems related to the flux linkage estimate. For operation in a low speed area, a stator current control method based on the DFLC modulator (DMCQ is presented. With the DMCC, it is possible to start up and operate a synchronous motor at a zero speed and at low rotational speeds in general. The DMCC is necessary in situations where high torque (e.g. nominal torque) is required at the starting moment, or if the motor runs several seconds at a zero speed or at a low speed range (up to 2 Hz). The behaviour of the described methods is shown with test results. The test results are presented for the direct flux linkage and torque controlled test drive system with a 14.5 kVA, four pole salient pole synchronous motor with a damper winding and electric excitation. The static accuracy of the drive is verified by measuring the torque in a static load operation, and the dynamics of the drive is proven in load transient tests. The performance of the drive concept presented in this work is sufficient e.g. for ship propulsion and for large pump drives. Furthermore, the developed methods are almost independent of the machine parameters.

Variable structure position control of an industrial robotic manipulator

The use of a robust position controller for a robotic manipulator moving in free space is presented. The aim is to implement in practice a controller that is robust to uncertainties in the model of the system, as well as being inexpensive from a computational point of view. Variable structure theory provides the technique for the design of such controller. The design steps are presented, first from a theoretical perspective and then applied to the control of a two degree-of-freedom manipulator. Simulation results that backed the implementation are presented, followed by the experiments conducted and the results that were obtained. The conclusion is that variable structure control is readily applicable to industrial robots for the robust control of positions.

Soluciones de ingeniería ambiental para el control de partículas en una planta industrial cerámica

Tesis (Maestría en Ciencias con Especialidad en Ingeniería Ambiental) UANL

Control de ruido en equipo industrial

Tesis (Maestro en Ciencias de la Ingeniería Eléctrica con Especialidad en Control) UANL, 1997.

Sistema integral de control de inventarios para mantenimiento en planta industrial

Tesis (Maestro en Ciencias de la Administración con Especialidad en Sistemas ) - Universidad Autónoma de Nuevo León, 2000

Las maquinarias - herramientas con control numérico en la fabricación industrial

UANL

Legal Control of Industrial Pollution

Industries constitute the main spring of development. Without industrial development no country could reach a stage in which a decent living for its citizens would be achieved. Increasing production to meet the basic needs of society augmented scientific invention and machine oriented industrial order.Environmental pollution ls a burning global issue. It is more serious and dangerous than terrorism. Started with the discovery of fire and development of civilization. Pollution went unnoticed throughout the centuries of human growth until its adverse effects on human environment become explicit.National concern tor environment started in our country only atter the cause of protection of environment received global attention. At present legal control ot industrial pollution is in a scattered framework of piece meal processes with overlapping provisions and authorities.Environmental protection- should be an item not only in the concurrent list of schedule 7 to the Constitution but also in the list of matters entrusted to the panchayati institutions in the Schedule 11. It is heartening to note that so far as municipalities are concerned the Constitution of India lives up to the expectation. In the wake of New Industrial Policy based on liberalisation a long list of small scale industries fall outside the purview of environmental clearance. The Indian concept of environmental im»act assessment introduced under the Environment Act by notification excludes the entire gamut of small scale industries and r.elates only to scheduled industries covered by the notifica~ion. Most of them are subjected to ETA only it the investment goes above ~.50 crores. This provision dilutes the impact assessment considerably A mandatory impact assessment with public partiCipation and with provision for a review by specialized environmental courts will eliminate the possible evils of this judicial passiveness.

Environomics - A Financial Estimate of Environmental Pollution Control and Abatement Schemes in Eloor-Edayar Industrial Belt

The present study consists of nine chapters including the introductory chapter. Chapter II makes a brief review of environmental literature and examines various measures adopted at the global level to protect the environment. The environmental problems often transgress national sovereignity and geographical boundaries. Therefore, attempts must be made at the national and international levels to protect the environment, the resources of which are the common property of mankind. The protection of the national environment from the ancient till the present forms the content of Chapter III. These chapters together provide a background to understand the issues analysed in the subsequent chapters. Carefully worked out theoretical framework is a pre-requisite for the successful study of a complex subject. Some of the theoretical issues of ‘environomics’ are examined in Chapter IV. The theoretical issues involved in estimating the costs and benefits of environmental protection constitute the theme of Chapter V. The state of environment in Eloor-Edayar Industrial belt andthe impact analysis of pollution of the area are discussed in Chapter VI and VII respectively. Chapter VIII makes the financial estimate of environmental protection of the project And finally, Chapter IX presents the findings of the study

Rehabilitació i control d'un manipulador industrial

El grup de visió per computadora de la Universitat de Girona, disposava d’un manipulador lineal com a sistema de posicionament, per poder inspeccionar mitjançant visió artificial, la superfície de diverses peces. El control es realitzava a partir d’un PLC, controlant la posició de la plataforma de posicionament a partir d’un servomotor, un servocontrolador i una targeta d’entrada i sortida de polsos. Es pretén la recuperació d’aquest sistema de posicionament lineal a partir de la recopilació de la informació inicial. El nou ús serà enfocat al posicionament i a la classificació de diversos elements. D’aquesta forma es podrà estudiar el funcionament d’un servomotor governat per un servodriver i una targeta d’entrada i sortida de polsos i s’utilitzarà com a element didàctic per a la universitat. Es complementarà la documentació disponible i s’elaborarà informació tècnica