Impacto da influência de um Sistema de Gestão Técnica Centralizada na redução dos custos de exploração de um edifício

É de conhecimento do meio, que os Sistemas de Gestão Técnica Centralizada (SGTC) são uma mais-valia para a redução de utilização de energia associados principalmente aos sistemas de Aquecimento, Ventilação e Ar Condicionado (AVAC) apesar das potencialidades serem abrangentes a outras áreas. No entanto, existe alguma lacuna quanto à quantificação dessa mais-valia, facto importante sobretudo para a alteração de mentalidades dos promotores e proprietários dos edifícios, que por falta de prova, normalmente apenas associam o SGTC a um investimento num serviço desnecessário. As potencialidades dos SGTC são muitas, a título de exemplo, redução na utilização de fontes de energia, gestão da manutenção de sistemas e equipamentos, análise de eficiências de equipamentos, entre muitas outras, sendo nesta dissertação estudado com mais profundidade a questão associada à diferença dos custos de exploração resultantes da utilização de energia num edifício por parte dos sistemas de AVAC, isto é, quais serão os ganhos na utilização da energia, associados ao sistema AVAC, que podem ser obtidos com a implementação de um SGTC. Para o efeito, utilizou-se os sistemas e equipamentos existentes no edifício ECOTERMOLAB, pertencente ao Instituto de Soldadura e Qualidade (ISQ), com o objetivo de verificar as diferenças de utilização de energia resultantes do funcionamento do edifício em normal atividade, isto é, o edifício com todos os seus sistemas operacionais, incluindo o SGTC, e o edifício em funcionamento sem o auxílio do SGTC, ou seja, todos os sistemas associados ao sistema AVAC em funcionamento em modo manual e sem recurso a variação de caudal na rede aeráulica e hidráulica. Em termos anuais, o ECOTERMOLAB consome, aproximadamente, cerca de 38,1 MWh de energia elétrica e 39,2 MWh de gás natural, o que representa uma utilização de energia primária de 14,4 tep/ano. Esta energia, representa um encargo financeiro anual de, aproximadamente, 9500€/ano, correspondente a 7000€/ano de energia elétrica e 2500€/ano de gás natural. Após a análise desenvolvida neste trabalho, conclui-se que o funcionamento do edifício sem controlo do sistema de AVAC por SGTC representaria em termos anuais a um aumento de, aproximadamente, 25,2 MWh e 6,2 MWh de energia elétrica e de gás natural, respetivamente. Em termos de energia primária, a diferença entre soluções origina um acréscimo na utilização de energia de 7,8 tep/ano o que representa um aumento de emissão de CO2 na ordem das 9,4 ton/ano. A avaliação económica, recaiu sobre a determinação de indicadores para avaliação da viabilidade de implementação de um SGTC, nomeadamente, o período de retorno simples, o valor atual líquido e a taxa interna de rentabilidade. Todos estes indicadores se revelaram positivos, apresentando um período de retorno ligeiramente superior a oito anos, um valor atual líquido positivo (8864,1€) e uma taxa interna de rentabilidade superior à taxa de custo de capital (11,2%).

A Prospective Assessment of Renal Transplantation Versus Haemodialysis: Which Therapeutic Modality Is Good Value for Society?

Background: Economic evaluations help health authorities facing budget constraints. This study compares the health-related quality of life (HRQOL) and costs in patient subgroups on haemodialysis (HD) and renal transplantation (KT). Methods: In a prospective study with follow-up of 1-3 years, we performed a costutility analysis of KT vs. HD, adopting a lifetime horizon. A societal perspective was taken. Costs for organ procurement, KT eligibility, transplant surgery and follow-up of living donors were included. Key clinical events were recorded. HRQOL was assessed using the EuroQol instrument. Results: The HRQOL remained stable on HD patients. After KT, mean utility score improved at 3 months while mean EQ-VAS scores showed a sustained improvement. Mean annual cost for HD was 32,567.57€. Mean annual costs for KT in the year-1 and in subsequent years were, 60,210.09€ and 12,956.77€ respectively. Cost for initial hospitalization averaged 18,740.74€. HLA-mismatches increased costs by 75% for initial hospitalization (p < 0.001) and 41% in the year-1 (p < 0.05), and duplicate the risk of readmission in the year-1 (p < 0.05). The incremental costutility ratio was 5,534.46€/QALY, increasing 35% when costs for organ procurement were added. KT costs were 41,541.63€ more but provided additional 7.51 QALY. Conclusions: The KT is cost-effective compared with HD. Public funding should reflect the value created by the intervention and adapt to the organ demand.

Annoyance and welfare costs from the presence of renewable energy power plants: an application of the contingent valuation method

Sustainability is frequently defined by its three pillars: economically viable, socially equitable, and environmentally bearable. Consequently the evaluation of the sustainability of any decision, public or private, requires information on these three dimensions. This paper focuses on social sustainability. In the context of renewable energy sources, the examination of social sustainability requires the analysis of not only the efficiency but also the equity of its welfare impacts. The present paper proposes and applies a methodology to generate the information necessary to do a proper welfare analysis of the social sustainability of renewable energy production facilities. This information is key both for an equity and an efficiency analysis. The analysis focuses on the case of investments in renewable energy electricity production facilities, where the impacts on local residents’ welfare are often significantly different than the welfare effects on the general population. We apply the contingent valuation method to selected facilities across the different renewable energy power plants located in Portugal and conclude that local residents acknowledge differently the damage sustained by the type, location and operation of the plants. The results from these case studies attest to the need of acknowledging and quantifying the negative impacts on local communities when assessing the economic viability, social equity and environmental impact of renewable energy projects.

A deterministic model to assess the impact of AIDS interventions in countries with generalized HIV epidemic. An application to Botswana

General introductionThe Human Immunodeficiency/Acquired Immunodeficiency Syndrome (HIV/AIDS) epidemic, despite recent encouraging announcements by the World Health Organization (WHO) is still today one of the world's major health care challenges.The present work lies in the field of health care management, in particular, we aim to evaluate the behavioural and non-behavioural interventions against HIV/AIDS in developing countries through a deterministic simulation model, both in human and economic terms. We will focus on assessing the effectiveness of the antiretroviral therapies (ART) in heterosexual populations living in lesser developed countries where the epidemic has generalized (formerly defined by the WHO as type II countries). The model is calibrated using Botswana as a case study, however our model can be adapted to other countries with similar transmission dynamics.The first part of this thesis consists of reviewing the main mathematical concepts describing the transmission of infectious agents in general but with a focus on human immunodeficiency virus (HIV) transmission. We also review deterministic models assessing HIV interventions with a focus on models aimed at African countries. This review helps us to recognize the need for a generic model and allows us to define a typical structure of such a generic deterministic model.The second part describes the main feed-back loops underlying the dynamics of HIV transmission. These loops represent the foundation of our model. This part also provides a detailed description of the model, including the various infected and non-infected population groups, the type of sexual relationships, the infection matrices, important factors impacting HIV transmission such as condom use, other sexually transmitted diseases (STD) and male circumcision. We also included in the model a dynamic life expectancy calculator which, to our knowledge, is a unique feature allowing more realistic cost-efficiency calculations. Various intervention scenarios are evaluated using the model, each of them including ART in combination with other interventions, namely: circumcision, campaigns aimed at behavioral change (Abstain, Be faithful or use Condoms also named ABC campaigns), and treatment of other STD. A cost efficiency analysis (CEA) is performed for each scenario. The CEA consists of measuring the cost per disability-adjusted life year (DALY) averted. This part also describes the model calibration and validation, including a sensitivity analysis.The third part reports the results and discusses the model limitations. In particular, we argue that the combination of ART and ABC campaigns and ART and treatment of other STDs are the most cost-efficient interventions through 2020. The main model limitations include modeling the complexity of sexual relationships, omission of international migration and ignoring variability in infectiousness according to the AIDS stage.The fourth part reviews the major contributions of the thesis and discusses model generalizability and flexibility. Finally, we conclude that by selecting the adequate interventions mix, policy makers can significantly reduce the adult prevalence in Botswana in the coming twenty years providing the country and its donors can bear the cost involved.Part I: Context and literature reviewIn this section, after a brief introduction to the general literature we focus in section two on the key mathematical concepts describing the transmission of infectious agents in general with a focus on HIV transmission. Section three provides a description of HIV policy models, with a focus on deterministic models. This leads us in section four to envision the need for a generic deterministic HIV policy model and briefly describe the structure of such a generic model applicable to countries with generalized HIV/AIDS epidemic, also defined as pattern II countries by the WHO.

10

This contribution introduces Data Envelopment Analysis (DEA), a performance measurement technique. DEA helps decision makers for the following reasons: (1) By calculating an efficiency score, it indicates if a firm is efficient or has capacity for improvement; (2) By setting target values for input and output, it calculates how much input must be decreased or output increased in order to become efficient; (3) By identifying the nature of returns to scale, it indicates if a firm has to decrease or increase its scale (or size) in order to minimise the average total cost; (4) By identifying a set of benchmarks, it specifies which other firms' processes need to be analysed in order to improve its own practices. This contribution presents the essentials about DEA, alongside a case study to intuitively understand its application. It also introduces Win4DEAP, a software package that conducts efficiency analysis based on DEA methodology. The methodical background of DEA is presented for more demanding readers. Finally, four advanced topics of DEA are treated: adjustment to the environment, preferences, sensitivity analysis and time series data.

DEA does not like positive discrimination : a comparison of alternative models based on empirical data

Due to the existence of free software and pedagogical guides, the use of data envelopment analysis (DEA) has been further democratized in recent years. Nowadays, it is quite usual for practitioners and decision makers with no or little knowledge in operational research to run themselves their own efficiency analysis. Within DEA, several alternative models allow for an environment adjustment. Five alternative models, each of them easily accessible to and achievable by practitioners and decision makers, are performed using the empirical case of the 90 primary schools of the State of Geneva, Switzerland. As the State of Geneva practices an upstream positive discrimination policy towards schools, this empirical case is particularly appropriate for an environment adjustment. The alternative of the majority of DEA models deliver divergent results. It is a matter of concern for applied researchers and a matter of confusion for practitioners and decision makers. From a political standpoint, these diverging results could lead to potentially opposite decisions. Grâce à l'existence de logiciels en libre accès et de guides pédagogiques, la méthode data envelopment analysis (DEA) s'est démocratisée ces dernières années. Aujourd'hui, il n'est pas rare que les décideurs avec peu ou pas de connaissances en recherche opérationnelle réalisent eux-mêmes leur propre analyse d'efficience. A l'intérieur de la méthode DEA, plusieurs modèles permettent de tenir compte des conditions plus ou moins favorables de l'environnement. Cinq de ces modèles, facilement accessibles et applicables par les décideurs, sont utilisés pour mesurer l'efficience des 90 écoles primaires du canton de Genève, Suisse. Le canton de Genève pratiquant une politique de discrimination positive envers les écoles défavorisées, ce cas pratique est particulièrement adapté pour un ajustement à l'environnement. La majorité des modèles DEA génèrent des résultats divergents. Ce constat est préoccupant pour les chercheurs appliqués et perturbant pour les décideurs. D'un point de vue politique, ces résultats divergents conduisent à des prises de décision différentes selon le modèle sur lequel elles sont fondées.

Adjusting for the environment in DEA: a comparison of alternative models based on empirical data

Due to the existence of free software and pedagogical guides, the use of Data Envelopment Analysis (DEA) has been further democratized in recent years. Nowadays, it is quite usual for practitioners and decision makers with no or little knowledge in operational research to run their own efficiency analysis. Within DEA, several alternative models allow for an environmental adjustment. Four alternative models, each user-friendly and easily accessible to practitioners and decision makers, are performed using empirical data of 90 primary schools in the State of Geneva, Switzerland. Results show that the majority of alternative models deliver divergent results. From a political and a managerial standpoint, these diverging results could lead to potentially ineffective decisions. As no consensus emerges on the best model to use, practitioners and decision makers may be tempted to select the model that is right for them, in other words, the model that best reflects their own preferences. Further studies should investigate how an appropriate multi-criteria decision analysis method could help decision makers to select the right model.

Ilmajohtoverkon viankorjaus maakaapelointiteknologiaa hyödyntäen

Elenia Oy linjasi vuonna 2009 suunnittelustrategiassaan, että koko sen verkkoalueella käytetään ainoana rakennustapana maakaapelointia. Lisäksi vuoden 2013 sähkömarkkinalain sähkönjakeluverkkoyhtiöiltä edellyttämät toimitusvarmuuskriteerit ovat lisänneet säävarman verkon rakentamista merkittävästi. Tämän diplomityön tavoitteena on tutkia ilmajohtoverkon viankorjauksen soveltumista maakaapeloinnilla tehtäväksi. Tarkastelu toteutetaan taloudellisuuden ja käytännön toteutuksen näkökulmista. Taloudellisessa tarkastelussa vertaillaan ilmajohtorakentamisen ja maakaapeloinnin elinkaarikustannuksia viankorjauksen yhteydessä. Käytännön toteutuksen osalta esitetään tilanteet, joissa viankorjaus on järkevä suorittaa maakaapeloimalla. Käyttämällä laskennassa Energiaviraston yksikköhintoja, jäävät viankorjaukselle soveltuvat verkko-osuudet elinkaarikustannustarkastelun valossa vähäisiksi. Tehokas investoiminen, auraustekniikan hyödyntäminen, regulaatiomallin kannustimet ja kaapelointiratkaisujen hintakehitys voidaan kuitenkin todeta merkittäviksi vaikuttajiksi maakaapeloinnin yleistymisessä toimintatavaksi ilmajohtoverkon viankorjauksessa.

Le contrat de distribution exclusive et le principe de la concurrence au Canada

Les contrats de distribution exclusive sont couramment utilisés dans la mise en marché des produits. Des doutes et des critiques ont été, pourtant, soulevés relativement à leur validité au regard du droit de la concurrence. Ces ententes et les pratiques qui en découlent paraissent, à première vue, anticoncurrentielles. Le propos de ce mémoire est d’examiner dans quelle mesure les contrats de distribution exclusive peuvent, en fait, stimuler la concurrence et de montrer, en conséquence, qu’ils devraient être considérés licites eu égard au droit de la concurrence. Nous trouvons, d’une part, que les pratiques exclusives sont suspectes vu qu’elles réduisent la liberté contractuelle du producteur et du distributeur. Cette restriction est susceptible d’entraver la concurrence à cause du pouvoir de marché qu’elle crée et elle peut, de ce fait, engendrer le monopole. La Loi sur la concurrence interdit de tels agissements. Les contrats de distribution exclusive peuvent, d’autre part, favoriser réellement la concurrence. Ils constituent un instrument stratégique utilisé par les entrepreneurs dans leur lutte pour accroître leur part de marché. La distribution exclusive, en portant les acteurs commerciaux à chercher les meilleures stratégies, renforce la concurrence. Celle-ci doit être entendue non seulement comme une constante rivalité entre toutes les entreprises, mais elle doit aussi inclure la coopération entre certaines entreprises en vue de mieux concurrencer d’autres à un niveau plus général. Une juste appréciation de la concurrence dans les contrats de distribution exclusive requiert le recours à l’analyse économique du droit. Cette analyse permet une évaluation de la concurrence basée sur le critère de l’efficience économique. En vue de déterminer si une pratique donnée augmente ou non le bien-être général (sur quoi l’analyse de l’efficience met l’accent), les effets négatifs de cette pratique devraient être mis en balance avec ses effets positifs résultant des gains en efficience. C’est dans ce sens que le droit de la concurrence a évolué tant dans l’Union européenne qu’aux États-Unis et au Canada pour permettre les ententes qui entraînent des gains nets d’efficience. Ce qu’on aurait pu condamner autrefois pour entrave à la concurrence, peut maintenant paraître comme une stratégie commerciale licite et saine. Compte tenu de ce récent développement, notre analyse nous conduit à la conclusion que les accords de distribution exclusive devraient être considérés licites dans la mesure où ils améliorent le bien-être du consommateur.

Desarrollo de un estado de la cuestión acerca de las interacciones entre el control de gestión y el aprendizaje organizacional.

Las organizaciones en la actualidad deben encontrar diferentes maneras de sobrevivir en un tiempo de rápida transformación. Uno de los mecanismos usados por las empresas para adaptarse a los cambios organizacionales son los sistemas de control de gestión, que a su vez permiten a las organizaciones hacer un seguimiento a sus procesos, para que la adaptabilidad sea efectiva. Otra variable importante para la adaptación es el aprendizaje organizacional siendo el proceso mediante el cual las organizaciones se adaptan a los cambios del entorno, tanto interno como externo de la compañía. Dado lo anterior, este proyecto se basa en la extracción de documentación soporte valido, que permita explorar las interacciones entre estos dos campos, los sistemas de control de gestión y el aprendizaje organizacional, además, analizar el impacto de estas interacciones en la perdurabilidad organizacional. ​

Provision of environmental output within a multi-output distance function approach

This paper redefines technical efficiency by incorporating provision of environmental goods as one of the outputs of the farm. The proportion of permanent and rough grassland to total agricultural land area is used as a proxy for the provision of environmental goods. Stochastic frontier analysis was conducted using a Bayesian procedure. The methodology is applied to panel data on 215 dairy farms in England and Wales. Results show that farm efficiency rankings change when provision of environmental outputs by farms is incorporated in the efficiency analysis, which may have important political implications.

Desenvolvimento de filtros cerâmicos impregnados com nanopartículas de prata para desinfecção de água potável

Brazil has vast amounts of hydric resources, whose quality has been deteriorating due to pollutant dumping. Household waste disposal is one of the main sources of water pollution, stimulating bacteria proliferation and introducing microorganisms, including those from fecal matter. Conventional water disinfection methods are a solution, but on the downside, they lead to the formation byproducts hazardous to human health. In this study, aiming to develop bactericidal filters for the disinfection of drinking water; silver nanoparticles were deposited on alumina foams through three routes: sputtering DC, dip coating and in situ chemical reduction of silver nitrate. The depositions were characterized through X-ray diffraction, scanning electron microscopy and EDS element mapping. The influence of the depositions on permeability and mechanical properties of the ceramic foams was assessed and, in sequence, a preliminary antibacterial efficiency analysis was carried out. Characterization results indicate that the chemical reduction routes were efficient in depositing homogeneously distributed silver particles and that the concentration of the metallic precursor salt affects size and morphology of the particles. The antibacterial efficiency analysis indicates that the chemical reduction filters have potential for water disinfection

Extração de metais (K, Mg, Ba, Ca, Cr, Mn, Li, Fe) de água produzida utilizando sistema microemulsionado

The produced water is a byproduct formed due to production of petroleum and carries with it a high amount of contaminants such as oil particles in suspension, organic compounds and metals. Thus, these latter pollutants are very difficult to treat because of its high solubility in water. The objective of this work is to use and evaluate a microemulsioned system to remove metals ( K , Mg , Ba , Ca , Cr , Mn , Li , Fe ) of synthetic produced water. For the extraction of metals, it was used a pseudoternary diagram containing the following phases: synthetic produced water as the aqueous phase (AP), hexane as organic phase (OP), and a cosurfactant/surfactant ratio equal to four (C/S = 4) as the third phase, where the OCS (saponified coconut oil) was used as surfactant and n-butanol as cosurfactant. The synthetic produced water was prepared in a bench scale and the region of interest in the diagram for the removal of metals was determined by experimental design called. Ten points located in the phase Winsor II were selected in an area with a large amount of water and small amounts of reagents. The samples were analyzed in atomic absorption spectrometer, and the results were evaluated through a statistical assesment, allowing the efficiency analysis of the effects and their interactions. The results showed percentages of extraction above 90% for the metals manganese, iron, chromium, calcium, barium and magnesium, and around 45% for metals lithium and potassium. The optimal point for the simultaneous removal of metals was calculated using statistical artifact multiple response function (MR). This calculation showed that the point of greatest extraction of metals occurs was the J point, with the composition [72% AP, 9% OP, 19% C/S], obtaining a global extraction percentage about 80%. Considering the aspects analyzed, the microemulsioned system has shown itself to be an effective alternative in the extraction of metals on synthetic produced water remediation

CrossMDA2: Uma abordagem para minimizar o problema da fragilidade de pointcuts na evolução de sistemas orientados a aspectos

This work proposes a model based approach for pointcut management in the presence of evolution in aspect oriented systems. The proposed approach, called conceptual visions based pointcuts, is motivated by the observation of the shortcomings in traditional approaches pointcuts definition, which generally refer directly to software structure and/or behavior, thereby creating a strong coupling between pointcut definition and the base code. This coupling causes the problem known as pointcut fragility problem and hinders the evolution of aspect-oriented systems. This problem occurs when all the pointcuts of each aspect should be reviewed due to any software changes/evolution, to ensure that they remain valid even after the changes made in the software. Our approach is focused on the pointcuts definition based on a conceptual model, which has definitions of the system's structure in a more abstract level. The conceptual model consists of classifications (called conceptual views) on entities of the business model elements based on common characteristics, and relationships between these views. Thus the pointcuts definitions are created based on the conceptual model rather than directly referencing the base model. Moreover, the conceptual model contains a set of relationships that allows it to be automatically verified if the classifications in the conceptual model remain valid even after a software change. To this end, all the development using the conceptual views based pointcuts approach is supported by a conceptual framework called CrossMDA2 and a development process based on MDA, both also proposed in this work. As proof of concept, we present two versions of a case study, setting up a scenario of evolution that shows how the use of conceptual visions based pointcuts helps detecting and minimizing the pointcuts fragility. For the proposal evaluation the Goal/Question/Metric (GQM) technique is used together with metrics for efficiency analysis in the pointcuts definition

Sistema de ar condicionado por absorção para ônibus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)