Transcending “the Impossible” : From Dead End to Expansive Learning

This dissertation investigates changes in bank work and the experience of impossibility attached to these by workers at the local level from the viewpoint of work-related well-being and collective learning. A special challenge in my work is to conceptualize the experience of impossibility as related to change, and as a starting point and tool for development work. The subject of the dissertation, solving the impossible as a collective learning process, came up as a central theme in an earlier project: Work Units between the Old and the New (1997 – 1999). Its aim was to investigate how change is constructed as a long-term process, starting from the planning of the change until its final realization in everyday banking work. I studied changes taking place in the former Postipankki (Postal Bank), later called Leonia. The three-year study involved the Branch Office of Martinlaakso, and was conducted from the perspective of well-being in a change process. The sense of impossibility involved in changes turned out to be one of the most crucial factors impairing the sense of well-being. The work community that was the target of my study did not have the available tools to construct the change locally, or to deal with the change-related impossibility by solving it through a mutual process among themselves. During the last year of the project, I carried out an intervention for development in the Branch Office, as collaboration between the researchers and the workers. The purpose of the intervention was to resolve such perceived change-related impossibility as experienced repeatedly and considered by the work community as relevant to work-related well-being. The documentation of the intervention – audio records from development sessions, written assignments by workers and assessment or evaluation interviews – constitute the essential data for my dissertation. The earlier data, collected and analysed during the first two years, provides a historical perspective on the process, all the way from construction of the impossibility towards resolving and transcending it. The aim of my dissertation is to understand the progress of developmental intervention as a shared, possibly expansive learning process within a work community and thus to provide tools for perceiving and constructing local change. I chose the change-related impossibility as a starting point for development work in the work community and as a target of conceptualization. This, I feel, is the most important contribution of my dissertation. While the intervention was in progress, the concept of impossibility started emerging as a stimulating tool for development work. An understanding of such a process can be applied to development work outside banking work as well. According to my results, it is pivotal that a concept stimulating development is strongly connected with everyday experiences of and speech about changes in work activity, as well as with the theoretical framework of work development. During this process, development work on a local level became of utmost interest as a case study for managing change. Theoretically, this was conceptualized as so-called second-order work and this concept accompanies us all the way through the research process. Learning second-order work and constructing tools based on this work have proved crucial for promoting well-being in the change circumstances in a local work unit. The lack of second-order work has led to non-well-being and inability to transcend the change-related sense of impossibility in the work community. Solving the impossible, either individually or situationally, did not orient the workers towards solving problems of impossibility together as a work community. Because the experience of the impossibility and coming to terms with transcending it are the starting point and the target of conceptualization in this dissertation, the research provides a fresh viewpoint on the theoretical framework of change and developmental work. My dissertation can facilitate construction of local changes necessitated by the recent financial crisis, and thus promote fluency and well-being in work units. It can also support change-related well-being in other areas of working life.

Jewish war veterans entering synagogue for service to honor the war dead; Munich Jewish Life

Digital Image

Genera of fungivorous Phlaeothripinae (Thysanoptera) from dead branches and leaf-litter in Australia

An illustrated key is provided for the identification of 39 genera of Thysanoptera-Phlaeothripinae with species that live in association with dead branches and leaf-litter in Australia and are considered to be fungus-feeding. Seven of these gen-era are not previously recorded from this continent, including un-named species of Deplorothrips, Malacothrips, Mystro-thrips, Preeriella and Tylothrips, together with Azaleothrips lepidus Okajima and Terthrothrips ananthakrishnani Kudo. A brief generic diagnosis is provided for each genus, together with comments on systematic problems and numbers of species. Copyright © 2013 Magnolia Press.

Arnon River - Dead Sea

Digital image

Duties to the dead and dying

Digital image

Copy of letter from Portuguese congregation, London, to K. K. S. I. regarding re-burial of dead

Digital image

Oh Holly, The Fish is Dead

From Kurt Vonnegut to Stephen King, many novelists use metanarrative techniques to insert fictional versions of themselves in the stories they tell. The function of deploying such techniques is often to draw attention to the liminal space between the fictional constructs inherent in the novel as a form, and the real world from which the constructs draw inspiration, and indeed, are read by an audience. For emerging writers working in short form narratives, however, the structural demands of the short story or flash fiction make the use of similar techniques problematic in the level of depth to which they can be deployed. ‘Oh Holly, the fish is dead’ is the fourth in a series of short stories that work to overcome the structural limitations of a succinct form by developing a fractured fictional version of the author over a number of pieces and published across a range of sites. The accumulative affect is a richer metanarrative textual arrangement that also allows for the individual short stories to function independently.

Design and development of a self-supported polymer electrolyte fuel cell system with anodic dead-end operation

Design and operational details for a self-supported polymer electrolyte fuel cell (PEFC) system with anodic dead-end fuel supply and internally humidified cathodic oxidant flow are described. During the PEFC operation, nitrogen and water back diffuse across the Nafion membrane from the cathode to the anode and accumulate in the anode flow channels affecting stack performance. The accumulated inert species are flushed from the stack by purging the fuel cell stack with a timer-activated purge valve to address the aforesaid problem. To minimize the system complexity, stack is designed in such a way that all the inert species accumulate in only one cell called the purge cell. A pulsed purge sequence comprises opening the valve for purge duration followed by purge-valve closing for the hold period and repeating the sequence in cycles. Since self-humidification is inadequate to keep the membrane wet, the anodic dead-end-operated PEFC stack with composite membrane comprising perflourosulphonic acid (Nafion) and silica is employed for keeping the membrane humidified even while operating the stack with dry hydrogen and internally humidified air.

Digital Dead Time Logic and Protection Circuitry for PWM Voltage Source Converters

Power semiconductor devices have finite turn on and turn off delays that may not be perfectly matched. In a leg of a voltage source converter, the simultaneous turn on of one device and the turn off of the complementary device will cause a DC bus shoot through, if the turn off delay is larger than the turn on delay time. To avoid this situation it is common practice to blank the two complementary devices in a leg for a small duration of time while switching, which is called dead time. This paper proposes a logic circuit for digital implementation required to control the complementary devices of a leg independently and at the same time preventing cross conduction of devices in a leg, and while providing accurate and stable dead time. This implementation is based on the concept of finite state machines. This circuit can also block improper PWM pulses to semiconductor switches and filters small pulses notches below a threshold time width as the narrow pulses do not provide any significant contribution to average pole voltage, but leads to increased switching loss. This proposed dead time logic has been implemented in a CPLD and is implemented in a protection and delay card for 3- power converters.

Reinforcement learning controllers for automatic generation control in power systems having re-heat units with GRC and dead-band

A new automatic generation controller (AGC) design approach, adopting reinforcement learning (RL) techniques, was recently pro- posed [1]. In this paper we demonstrate the design and performance of controllers based on this RL approach for automatic generation control of systems consisting of units having complex dynamics—the reheat type of thermal units. For such systems, we also assess the capabilities of RL approach in handling realistic system features such as network changes, parameter variations, generation rate constraint (GRC), and governor deadband.

Experimental Study on Dead-Time Induced Oscillations in a 100-kW Open-Loop Induction Motor Drive

This paper reports instability and oscillations in the stator current under light-load conditions in a practical 100-kW induction motor drive. Dead-time is shown to be a cause for such oscillations. This paper shows experimentally that these oscillations could be mitigated significantly with the help of a simple dead-time compensation scheme.

Study on the Effect of Dead Time and its Compensation for Bus-Clamping PWM Techniques

Dead-time is provided in between the gating signals of the top and bottom semiconductor switches in an inverter leg to prevent the shorting of DC bus. Due to this dead time, there is a significant unwanted change in the output voltage of the inverter. The effect is different for different pulse width modulation (PWM) methodologies. The effect of dead-time on the output fundamental voltage is studied theoretically as well as experimentally for bus-clamping PWM methodologies. Further, experimental observations on the effectiveness of dead-time compensation are presented.

Average Modelling of a Voltage Source Inverter with Dead-Time in a Synchronous Reference Frame

Voltage source inverters are an integral part of renewable power sources and smart grid systems. Computationally efficient and fairly accurate models for the voltage source inverter are required to carry out extensive simulation studies on complex power networks. Accuracy requires that the effect of dead-time be incorporated in the inverter model. The dead-time is essentially a short delay introduced between the gating pulses to the complementary switches in an inverter leg for the safety of power devices. As the modern voltage source inverters switch at fairly high frequencies, the dead-time significantly influences the output fundamental voltage. Dead-time also causes low-frequency harmonic distortion and is hence important from a power quality perspective. This paper studies the dead-time effect in a synchronous dq reference frame, since dynamic studies and controller design are typically carried out in this frame of reference. For the sake of computational efficiency, average models are derived, incorporating the dead-time effect, in both RYB and dq reference frames. The average models are shown to consume less computation time than their corresponding switching models, the accuracies of the models being comparable. The proposed average synchronous reference frame model, including effect of dead-time, is validated through experimental results.

Experimental Study on Dead-Time Induced Oscillations in a 100-kW Open-Loop Induction Motor Drive

This paper reports instability and oscillations in the stator current under light-load conditions in a practical 100-kW induction motor drive. Dead-time is shown to be a cause for such oscillations. This paper shows experimentally that these oscillations could be mitigated significantly with the help of a simple dead-time compensation scheme.

An Improved Dead-Time Compensation Scheme for Voltage Source Inverters Considering the Device Switching Transition Times

Inverter dead-time, which is meant to prevent shoot-through fault, causes harmonic distortion and change in the fundamental voltage in the inverter output. Typical dead-time compensation schemes ensure that the amplitude of the fundamental output current is as desired, and also improve the current waveform quality significantly. However, even with compensation, the motor line current waveform is observed to be distorted close to the current zero-crossings. The IGBT switching transition times being significantly longer at low currents than at high currents is an important reason for this zero-crossover distortion. Hence, this paper proposes an improved dead-time compensation scheme, which makes use of the measured IGBT switching transition times at low currents. Measured line current waveforms in a 2.2 kW induction motor drive with the proposed compensation scheme are compared against those with the conventional dead-time compensation scheme and without dead-time compensation. The experimental results on the motor drive clearly demonstrate the improvement in the line current waveform quality with the proposed method.