Management of severe blunt hepatic injury in the era of computed tomography and transarterial embolization: A systematic review and critical appraisal of the literature.

BACKGROUND: During the last decade, the management of blunt hepatic injury has considerably changed. Three options are available as follows: nonoperative management (NOM), transarterial embolization (TAE), and surgery. We aimed to evaluate in a systematic review the current practice and outcomes in the management of Grade III to V blunt hepatic injury. METHOD: The MEDLINE database was searched using PubMed to identify English-language citations published after 2000 using the key words blunt, hepatic injury, severe, and grade III to V in different combinations. Liver injury was graded according to the American Association for the Surgery of Trauma classification on computed tomography (CT). Primary outcome analyzed was success rate in intention to treat. Critical appraisal of the literature was performed using the validated National Institute for Health and Care Excellence "Quality Assessment for Case Series" system. RESULTS: Twelve articles were selected for critical appraisal (n = 4,946 patients). The median quality score of articles was 4 of 8 (range, 2-6). Overall, the median Injury Severity Score (ISS) at admission was 26 (range, 0.6-75). A median of 66% (range, 0-100%) of patients was managed with NOM, with a success rate of 94% (range, 86-100%). TAE was used in only 3% of cases (range, 0-72%) owing to contrast extravasation on CT with a success rate of 93% (range, 81-100%); however, 9% to 30% of patients required a laparotomy. Thirty-one percent (range, 17-100%) of patients were managed with surgery owing to hemodynamic instability in most cases, with 12% to 28% requiring secondary TAE to control recurrent hepatic bleeding. Mortality was 5% (range, 0-8%) after NOM and 51% (range, 30-68%) after surgery. CONCLUSION: NOM of Grade III to V blunt hepatic injury is the first treatment option to manage hemodynamically stable patients. TAE and surgery are considered in a highly selective group of patients with contrast extravasation on CT or shock at admission, respectively. Additional standardization of the reports is necessary to allow accurate comparisons of the various management strategies. LEVEL OF EVIDENCE: Systematic review, level IV.

Critical analysis of thoracotomies performed in the emergency room in 10 years

OBJECTIVE: To conduct a critical analysis of thoracotomies performed in the emergency rooms.METHODS: We analyzed mortality rates and survival as outcome variables, mechanism of injury, site of injury and anatomic injury as clinical variables, and gender and age as demographic variables of patients undergoing thoracotomy in the emergency room after traumatic injury.RESULTS: Of the 105 patients, 89.5% were male. The average age was 29.2 years. Penetrating trauma accounted for 81% of cases. The most common mechanism of trauma was wound by a firearm projectile (gunshot), in 64.7% of cases. Patients with stab wounds (SW) accounted for 16.2% of cases. Overall survival was 4.7%. Survival by gunshot was 1.4%, and by SW, 23.5%. The ERT following blunt trauma showed a 100%mortality.CONCLUSION: The results obtained in the Emergency Hospital of Porto Alegre POA-HPS are similar to those reported in the world literature.

Intellectual Property Protection in China in the Cases of Outsourcing and own Manufacturing

The intellectual property (IP) environment in China is still very immature. There are several problems in legal, political, economic, social-cultural, competitive and labor environment which have hindered IP legal enforcement. Under such circumstances, IP misappropriation is a major concern especially for foreign small and medium-sized enterprises (SMEs) doing business in China. These circumstances require foreign companies, no matter whether they are multinational corporations (MNCs) or SMEs and have own manufacturing in China or not, to take strong IP actions. Therefore, the purpose of this study is to discuss how IP can be protected in China in the case of outsourcing and in the case of own manufacturing. The comparison will consider the process of outsourcing and own manufacturing consisting two stages: preparation stage and operation stage. In order to clarify the conceptual arguments, two illustrative case studies were studied. The case data bases on two semi-structured interviews of the managing directors, field notes and archival data. The findings propose that attention in IP protection should be given to following issues: integrating IP strategy into the company’s business strategy, protecting the most critical knowledge, regarding IP steps as a whole in the protection mechanism and making IP strategy as proactive as possible. The major difference between outsourcing and own manufacturing in IP protection is in the operation stage. Besides, the findings also provide managerial advice on IP protection, e.g. foreign managers should be prepared for IP risks in China, they should establish an own IP protection mechanism which matches the company’s situation and they should consider IP protection as an on-going process.

Rigorous development of safety-critical systems

Nowadays, computer-based systems tend to become more complex and control increasingly critical functions affecting different areas of human activities. Failures of such systems might result in loss of human lives as well as significant damage to the environment. Therefore, their safety needs to be ensured. However, the development of safety-critical systems is not a trivial exercise. Hence, to preclude design faults and guarantee the desired behaviour, different industrial standards prescribe the use of rigorous techniques for development and verification of such systems. The more critical the system is, the more rigorous approach should be undertaken. To ensure safety of a critical computer-based system, satisfaction of the safety requirements imposed on this system should be demonstrated. This task involves a number of activities. In particular, a set of the safety requirements is usually derived by conducting various safety analysis techniques. Strong assurance that the system satisfies the safety requirements can be provided by formal methods, i.e., mathematically-based techniques. At the same time, the evidence that the system under consideration meets the imposed safety requirements might be demonstrated by constructing safety cases. However, the overall safety assurance process of critical computerbased systems remains insufficiently defined due to the following reasons. Firstly, there are semantic differences between safety requirements and formal models. Informally represented safety requirements should be translated into the underlying formal language to enable further veri cation. Secondly, the development of formal models of complex systems can be labour-intensive and time consuming. Thirdly, there are only a few well-defined methods for integration of formal verification results into safety cases. This thesis proposes an integrated approach to the rigorous development and verification of safety-critical systems that (1) facilitates elicitation of safety requirements and their incorporation into formal models, (2) simplifies formal modelling and verification by proposing specification and refinement patterns, and (3) assists in the construction of safety cases from the artefacts generated by formal reasoning. Our chosen formal framework is Event-B. It allows us to tackle the complexity of safety-critical systems as well as to structure safety requirements by applying abstraction and stepwise refinement. The Rodin platform, a tool supporting Event-B, assists in automatic model transformations and proof-based verification of the desired system properties. The proposed approach has been validated by several case studies from different application domains.

Asleep or not asleep? Evaluation of the Quality of Patients’ Sleep in Critical Care Nursing

Sleep is important for the recovery of a critically ill patient, as lack of sleep is known to influence negatively a person’s cardiovascular system, mood, orientation, and metabolic and immune function and thus, it may prolong patients’ intensive care unit (ICU) and hospital stay. Intubated and mechanically ventilated patients suffer from fragmented and light sleep. However, it is not known well how non-intubated patients sleep. The evaluation of the patients’ sleep may be compromised by their fatigue and still position with no indication if they are asleep or not. The purpose of this study was to evaluate ICU patients’ sleep evaluation methods, the quality of non-intubated patients’ sleep, and the sleep evaluations performed by ICU nurses. The aims were to develop recommendations of patients’ sleep evaluation for ICU nurses and to provide a description of the quality of non-intubated patients’ sleep. The literature review of ICU patients’ sleep evaluation methods was extended to the end of 2014. The evaluation of the quality of patients’ sleep was conducted with four data: A) the nurses’ narrative documentations of the quality of patients’ sleep (n=114), B) the nurses’ sleep evaluations (n=21) with a structured observation instrument C) the patients’ self-evaluations (n=114) with the Richards-Campbell Sleep Questionnaire, and D) polysomnographic evaluations of the quality of patients’ sleep (n=21). The correspondence of data A with data C (collected 4–8/2011), and data B with data D (collected 5–8/2009) were analysed. Content analysis was used for the nurses’ documentations and statistical analyses for all the other data. The quality of non-intubated patients’ sleep varied between individuals. In many patients, sleep was light, awakenings were frequent, and the amount of sleep was insufficient as compared to sleep in healthy people. However, some patients were able to sleep well. The patients evaluated the quality of their sleep on average neither high nor low. Sleep depth was evaluated to be the worst and the speed of falling asleep the best aspect of sleep, on a scale 0 (poor sleep) to 100 (good sleep). Nursing care was mostly performed while the patients were awake, and thus the disturbing effect was low. The instruments available for nurses to evaluate the quality of patients’ sleep were limited and measured mainly the quantity of sleep. Nurses’ structured observatory evaluations of the quality of patients’ sleep were correct for approximately two thirds of the cases, and only regarding total sleep time. Nurses’ narrative documentations of the patients’ sleep corresponded with patients’ self-evaluations in just over half of the cases. However, nurses documented several dimensions of sleep that are not included in the present sleep evaluation instruments. They could be classified according to the components of the nursing process: needs assessment, sleep assessment, intervention, and effect of intervention. Valid, more comprehensive sleep evaluation methods for nurses are needed to evaluate, document, improve and study patients’ quality of sleep.

Compositional amalgamations and balances: a critical approach

The amalgamation operation is frequently used to reduce the number of parts of compositional data but it is a non-linear operation in the simplex with the usual geometry, the Aitchison geometry. The concept of balances between groups, a particular coordinate system designed over binary partitions of the parts, could be an alternative to the amalgamation in some cases. In this work we discuss the proper application of both concepts using a real data set corresponding to behavioral measures of pregnant sows

Multidisciplinary analysis of clinical cases: a transition towards active learning in dental education

In the past 2009/10 academic year, we took steps towards introduction of active methodologies, from a multidisciplinar approach, into a conventional lecture-based Dental Education program. We consolidated these practices in the current 2010/11 year, already within a new Bologna-adapted scheme. Transition involved (i) critical assessment of the limitations of traditional teaching (ii) identification of specific learning topics allowing for integration of contents, (iii) implementation of student-centred learning activities in old curricular plans (iv) assessment of students' satisfaction and perceived learning outcomes, (v) implementation of these changes in new Bologna-adapted curricula

Plutarch's 'Lives' and the critical reader

This paper analyses the kind of reader constructed in the Lives and the response expected of that reader. It begins by attempting a typology of moralising in the Lives. Plutarch does sometimes make general 'gnomic' statements about right and wrong, and occasionally passes explicit judgement on a subject's behaviour. In addition, the language with which Plutarch describes character is inherently moralistic; and even when he does not pass explicit judgment, Plutarch can rely on a common set of notions about what makes behaviour virtuous or vicious. However, the application of any moral lessons is left to the reader's own judgement. Furthermore, Plutarch's use of multiple focalisations means that the reader is sometimes presented with varying ways of looking at the same individual or the same historical situation. In addition, many incidents or anecdotes are marked by 'multivalence': that is, they resist reduction to a single moral message or lesson. In such cases, the reader is encouraged to exercise his or her own critical faculties. Indeed, the prologues which precede many pairs of Lives and the synkriseis which follow them sometimes explicitly invite the reader's participation in the work of judging. The syncritic structure of the Parallel Lives also invites the reader's participation, as do the varying perspectives provided by a corpus of overlapping Lives. In fact, the presence of a critical, engaged reader is presupposed by the agonistic nature of much of Greek literature, and of several texts in the Moralia which stage opposing viewpoints or arguments. Plutarch himself argues for such a reader in his How the young man should listen to poems.

High leverage interventions: three cases of defensive action and their lessons for OR/MS today.

This paper has two aims. First, to present cases in which scientists developed a defensive system for their homeland: Blackett and the air defense of Britain in WWII, Forrester and the SAGE system for North America in the Cold War, and Archimedes’ work defending Syracuse during the Second Punic War. In each case the historical context and the individual’s other achievements are outlined, and a description of the contribution’s relationship to OR/MS is given. The second aim is to consider some of the features the cases share and examine them in terms of contemporary OR/MS methodology. Particular reference is made to a recent analysis of the field’s strengths and weaknesses. This allows both a critical appraisal of the field and a set of potential responses for strengthening it. Although a mixed set of lessons arise, the overall conclusion is that the cases are examples to build on and that OR/MS retains the ability to do high stakes work.

Beyond description to pattern: The contribution of Batesonian epistemology to critical realist research

This paper proposes a limitation to epistemological claims to theory building prevalent in critical realist research. While accepting the basic ontological and epistemological positions of the perspective as developed by Roy Bhaskar, it is argued that application in social science has relied on sociological concepts to explain the underlying generative mechanisms, and that in many cases this has been subject to the effects of an anthropocentric constraint. A novel contribution to critical realist research comes from the work and ideas of Gregory Bateson. This is in service of two central goals of critical realism, namely an abductive route to theory building and a commitment to interdisciplinarity. Five aspects of Bateson’s epistemology are introduced: (1) difference, (2) logical levels of abstraction, (3) recursive causal loops, (4) the logic of metaphor, and (5) Bateson’s theory of mind. The comparison between Bateson and Bhaskar’s ideas is seen as a form of double description, illustrative of the point being raised. The paper concludes with an appeal to critical realists to start exploring the writing and outlook of Bateson himself.

Critical anthropomorphism and animal ethics

Anthropomorphism has long been considered a cardinal error when describing animals. Ethicists have feared the consequences of misrepresenting animals in their reasoning. Recent research within human-animal studies, however, has sophisticated the notion of anthropomorphism. It is suggested that avoiding anthropomorphism merely creates other morphisms, such as mechanomorphism. Instead of avoiding anthropomorphism, it is argued that it is a communicative strategy that should be used critically. Instances of anthropomorphism in animal ethics are analyzed in this paper. Some analogies made between people and non-human animals in present theories of animal ethics are clear instances of psychological anthropomorphism. Other analogies are implicit cases of cultural anthropomorphism. It is argued that animal ethics needs to take the wider discourse of critical anthropomorphism into account in order to sophisticate the understanding and use of anthropomorphic projections. Anthropomorphism is an efficient tool of communication, and it may be made an adequate one as well.

Generalized partition function zeros of 1D spin models and their critical behavior at edge singularities

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Oral bisphosphonate-related osteonecrosis of the jaws in rheumatoid arthritis patients: a critical discussion and two case reports

Background: Bisphosphonate-related osteonecrosis of the jaw (BRONJ) is a clinical condition characterized by the presence of exposed bone in the maxillofacial region. Its pathogenesis is still undetermined, but may be associated with risk factors such as rheumatoid arthritis (RA). The aim of this paper is to report two unpublished cases of BRONJ in patients with RA and to conduct a literature review of similar clinical cases with a view to describe the main issues concerning these patients, including demographic characteristics and therapeutic approaches applied.Methods: Two case reports of BRONJ involving RA patients were discussedResults: Both patients were aging female taking alendronate for more than 3 years. Lesions were detected in stage II in posterior mandible with no clear trigger agent. The treatment applied consisted of antibiotics, oral rinses with chlorhexidine, drug discontinuation and surgical procedures. Complete healing of the lesions was achieved.Conclusions: This paper brings to light the necessity for rheumatologists to be aware of the potential risk to their patients of developing BRONJ and to work together with dentists for the prevention and early detection of the lesions. Although some features seem to link RA with oral BRONJ and act as synergistic effects, more studies should be developed to support the scientific bases for this hypothesis.

Root canal treatment of three-rooted maxillary second premolars: Report of four cases

The aim of this report is to contribute to a better understanding of the radiographic, clinical and anatomic findings in maxillary second premolars. This paper reports the endodontic treatment of two cases of three-rooted three-canal maxillary second premolars in different patients, and two sound maxillary second premolars also with three canals and three independent roots in a sibling of one of the patients. Although the presence of maxillary second premolars with one or two canals and one root is much more common, other anatomic conditions can be found. A correct clinical and radiographic diagnosis based on knowledge of root canal anatomy and critical interpretation of radiographs is necessary for a safer and successful endodontic treatment of these teeth.

Critical temperature for first-order phase transitions in confined systems

We consider the Euclidean D-dimensional -lambda vertical bar phi vertical bar(4)+eta vertical bar rho vertical bar(6) (lambda,eta > 0) model with d (d <= D) compactified dimensions. Introducing temperature by means of the Ginzburg-Landau prescription in the mass term of the Hamiltonian, this model can be interpreted as describing a first-order phase transition for a system in a region of the D-dimensional space, limited by d pairs of parallel planes, orthogonal to the coordinates axis x(1), x(2),..., x(d). The planes in each pair are separated by distances L-1, L-2, ... , L-d. We obtain an expression for the transition temperature as a function of the size of the system, T-c({L-i}), i = 1, 2, ..., d. For D = 3 we particularize this formula, taking L-1 = L-2 = ... = L-d = L for the physically interesting cases d = 1 (a film), d = 2 (an infinitely long wire having a square cross-section), and for d = 3 (a cube). For completeness, the corresponding formulas for second-order transitions are also presented. Comparison with experimental data for superconducting films and wires shows qualitative agreement with our theoretical expressions.