Intersex in the clam Scrobicularia plana (Da Costa): Widespread occurrence in English Channel estuaries and surrounding areas

Estuarine clams Scrobicularia plana were sampled from 108 intertidal locations around the English Channel and adjacent areas. Although S. plana is believed to be a strict gonochorist, 58% of the populations sampled included intersexed individuals (described as male clams exhibiting ovotestis). Over the entire region, on average, 8.6% of male clams exhibited intersex, although proportions of affected males ranged from 0% to 53% depending on location. The severity of intersex was assessed using a simple classification scale, with the majority of individuals showing low levels of impact. Sex ratios were significantly skewed at some sites. There were no significant relationships between the incidence and severity of intersex; or of associations with size or parasitism of individual clams. Intersex in S. plana is a useful tool to assess endocrine disruptive effects in estuaries, although mechanisms of impact and causative agents remain uncertain.

Genetic variation of the razor clam Ensis siliqua (Jeffreys, 1875) along the European coast based on random amplified polymorphic DNA markers

Ensis siliqua is regarded as an increasingly valuable fishery resource with potential for commercial aquaculture in many European countries. The genetic variation of this razor clam was analysed by randomly amplified polymorphic DNA (RAPD) in six populations from Spain, Portugal and Ireland. Out of the 40 primers tested, five were chosen to assess genetic variation. A total of 61 RAPD loci were developed ranging in size from 400 to 2000 bp. The percentages of polymorphic loci, the allele effective number and the genetic diversity were comparable among populations, and demonstrated a high level of genetic variability. The values of Nei's genetic distance were small among the Spanish and Portuguese populations (0.051-0.065), and high between these and the Irish populations. Cluster and principal coordinate analyses supported these findings. A mantel test performed between geographic and genetic distance matrices showed a significant correlation (r=0.84, P

‘CLAM’ tests for measuring in-situ permeation properties of concrete

This paper descirbes a simple test measuring the sorptivity (a measure of the absorption property if concrete) and the air and water permeability of concrete on site. Using this test, the decay of pressure is monitired for the air permeability test.whereas water penetrating into the concrete at a constant pressure of 0.01 bar and 1.5 bar are recorded for the sorptivity and the water permeability tests respectively. These tests are essentially non-destructive in nature and a skilled operator is not needed. It is possible to carry out a number of tests quickly and efficiently on site without prior planning. It has been found that statistically satisfactory results can be obtained from a mean of three tests. As the flow lines are largely concentrated within 40 mm from the surface, reasonably reliable results can be obtained by drying the surface even if the surface under test is initially wet.

Microstructure evolution in CLAM steel under low cycle fatigue

In the process of room-temperature low cycle fatigue, the China Low Activation Martensitic steel exhibits at the beginning cyclic hardening and then continuous cyclic softening. The grain size decreased and the martensitic lath transformed to cells/subgrains after the tests. The subgrains increase in size with increasing strain amplitude.

Low cycle fatigue properties of CLAM steel at 823 K

China Low Activation Martensitic (CLAM) steel is considered to be the main candidate material for the first wall components of future fusion reactors in China. In this paper, the low cycle fatigue (LCF) behavior of CLAM steel is studied under fully reversed tension–compression loading at 823 K in air. Total strain amplitude was controlled from 0.14% to 1.8% with a constant strain rate of 2.4×10−3 s−1. The corresponding plastic strain amplitude ranged from 0.023% to 1.613%. The CLAM steel displayed continuous softening to failure at 823 K. The relationship between strain, stress and fatigue life was obtained using the parameters obtained from fatigue tests. The LCF properties of CLAM steel at 823 K followed Coffin–Manson relationship. Furthermore, irregular serration was observed on the stress–strain hysteresis loops of CLAM steel tested with the total strain amplitude of 0.45–1.8%, which was attributed to the dynamic strain aging (DSA) effect. During continuous cyclic deformation, the microstructure and precipitate distribution of CLAM steel changed gradually. Many tempered martensitic laths were decomposed into subgrains, and the size and number of M23C6 carbide and MX carbonitride precipitates decreased with the increase of total strain amplitude. The response cyclic stress promoted the recovery of martensitic lath, while the thermal activation mainly played an important role on the growth of precipitates in CLAM steel at 823 K. In order to have a better understanding of high-temperature LCF behavior, the potential mechanisms controlling stress–strain response, DSA phenomenon and microstructure changes have also been evaluated.

Evolution of microstructure and changes of mechanical properties of CLAM steel after long-term aging

The China Low Activation Martensitic (CLAM) steel has been developed as a candidate structural material for future fusion reactors. It is essential to investigate the evolution of microstructure and changes of mechanical properties of CLAM steel during thermal exposure. In this study, the long-term thermal aging of the CLAM steel has been carried out in air at 600 °C and 650 °C for 1100 h, 3000 h and 5000 h. The microstructural evolution with aging time was studied, including characteristics of the growth of M23C6 carbides and the formation of Laves-phase precipitates as well as the evolved subgrains. The microstructural evolution leads to the changes of mechanical properties of the CLAM steel. The Ductile–Brittle Transition Temperature (DBTT) increases significantly during the thermal aging, which is related to the formation of Laves-phase in the steel matrix. The possible mechanism of stabilizing microstructure during the thermal exposure has been analyzed based on the interaction between M23C6 carbides and subgrain boundaries.

Low cycle fatigue properties of CLAM steel at room temperature

The low cycle fatigue (LCF) properties and the fracture behavior of China Low Activation Martensitic (CLAM) steel have been studied over a range of total strain amplitudes from 0.2 to 2.0%. The specimens were cycled using tension-compression loading under total strain amplitude control. The CLAM steel displayed initial hardening followed by continuous softening to failure at room temperature in air. The relationship between strain and fatigue life was predicted using the parameters obtained from fatigue test. The factors effecting on low cycle fatigue of CLAM steel consisted of initial state of matrix dislocation arrangement, magnitude of cyclic stress, magnitude of total strain amplitude and microstructure. The potential mechanisms controlling the stress response, cyclic strain resistance and low cycle fatigue life have been evaluated.

Polycyclic aromatic hydrocarbons and oxidative stress markers in the clam Ruditapes decussatus from the Ria Formosa (Portugal)

Tese dout., Ciências e Tecnologias do Ambiente, Universidade do Algarve, 2007

Seasonal variations in gross biochemical composition, percent edibility, and condition index of the clam Ruditapes Decussatus cultivated in the Ria Formosa (South Portugal)

The grooved carpet shell clam, Ruditapes decussatus (L. 1758), is one of the most popular and profitable molluscs exploited in rearing plots in the Mediterranean. However, annual catch has been declining steadily since the early nineties. In order to understand the seasonality of its nutritional value, thus providing an improved basis for economical valuation of the resource, gross biochemical composition, percentage edibility and condition index were investigated during a year with monthly periodicity in a commercially exploited population of the clam Ruditapes decussatus in the Ria Formosa, a temperate mesotidal coastal lagoon located in the south of Portugal. Our results show that total and non-protein nitrogen co-varied during the year, resulting in a protein content that peaked in the warmest months. Although complementary in summer, carbohydrate and lipid contents showed irregular annual trends. The observed seasonality was comparable to that shown by studies elsewhere at similar latitudes, and are underpinned by the reproductive cycle of the species. Our results show the clams to be at their prime nutritional value at the beginning of summer, when protein content peaks.

Macrofauna spatial differences within clam dredge-tracks and their implications for short-term fishing effect studies

In situ observations of clam dredging showed that the effects of the dredge on the benthic macrofauna may not be constant during a tow. A sand buffer forms in front of the gear approximately 10m after the beginning of a tow, and this pushes the sediment partially aside.In this study, we analyse differences in abundance, the number of taxa present, diversity, and evenness within sections of dredge-tracks in a disturbed, fished area and a non-fished area along the southern coast of Portugal. These areas were sampled by divers before and after dredge-fishing activity. At each site, three dredge-tracks were produced. These tracks were divided in three longitudinal sections 1start, middle and end) and two transverse sections 1track and edge). Six quadrats were used to sample macrofauna in each section of every track and edge. Our results show differences exist in macro- faunal distribution and abundance across sections of a dredge-track. These differences should be considered in any assessment of the short-term ecological impact of dredges on benthic macrofauna

Characterizing the effects of ocean acidification in larval and juvenile Manila clam, Ruditapes philippinarum, using a transcriptomic approach

Ocean acidification as a result of anthropogenic carbon dioxide (CO2) emissions and global climate change poses a risk to the ecological landscape of intertidal and shallow subtidal communities. The organisms that inhabit these waters will have to cope with changing environmental conditions through the appropriate modulation of physiological processes. Calcifying organisms are particularly at risk, as increased atmospheric levels of CO2 in the atmosphere increase the partial pressure of CO2 (pCO2) in the oceans. Increased pCO2 reduces the saturation of carbonate minerals required to form calcified structures. Being able to cope with the increased energetic demand of maintaining these structures, in addition to other vital physiological processes, will be the key driver that determines which organisms will persist. Assessment of larval and juvenile Manila clam mortality and physiology in this study suggests that this species is capable of coping with elevated pCO2 conditions. The use of high throughput sequencing and RNA sequence analysis in larval clams revealed several physiological processes that play important roles in the Manila clam’s ability to tolerate elevated pCO2 conditions during this life stage. Exposure of juvenile Manila clams, acclimated to elevated pCO2 conditions, to a thermal stress revealed that this species might also be capable of coping with multiple stressors associated with global climate change. Manila clams could therefore represent a model for studying physiological mechanisms associated with successful acclimation of populations to ocean acidification.