Modelado de un sistema de telemetría LIDAR CW-RM

Los sistemas LIDAR (Light Detection and Ranging) permiten medir la distancia entre dos puntos, evaluando el tiempo que tarda una señal óptica (generalmente procedente de un Láser) en hacer un recorrido de ida y vuelta entre dichos puntos. En los sistemas CW-RM (Continuous Wave - Random Modulated) esta evaluación se hace calculando la correlación entre la señal emitida (pseudoaleatoria) y la recibida (cuyo retardo depender de la distancia entre los puntos). Este sistema CW-RM tiene la ventaja sobre los TOF (Time Of Flight) de que funcionan bien ún con señales recibidas de reducida relación señal a ruido. La precisión de la medida, depende, entre otros parámetros, del tiempo de bit de la secuencia pseudoaleatoria y de la frecuencia de muestreo del sistema que capta las señales y posteriormente las correla. El objetivo del presente trabajo es realizar un sistema de gran precisión, utilizando señales pseudoaleatorias de tiempo de bit de centenas de pico segundo y frecuencia de muestreo de Gs/s, para lo que deberemos utilizar equipamiento disponible en laboratorio, as mismo deberemos seleccionar y con guiar los láseres emisores para que puedan trabajar a estas velocidades. La primera etapa del proyecto será el conocimiento del instrumental de laboratorio que vamos a utilizar en el set-up. La segunda etapa será la realización de un primer montaje en el que se conectará emisor y receptor a través de una fibra óptica de longitud conocida. Esto nos permitir á el desarrollo de algoritmos para extraer información de la medida y para una calibración del instrumental para posteriores medidas. La tercera etapa es el diseño definitivo con emisor al aire para el que tendremos que ajustar todos los elementos ópticos del sistema, de modo que se pueda detectar la luz reflejada y además se pueda reducir parte de la luz de background.

A novel method for simultaneous high resolution identification of HLA-A, HLA-B, and HLA-Cw alleles.

We describe a novel high resolution DNA based typing approach for HLA class I alleles, which identifies the recombinational motifs present in exons 2 and 3 of the HLA class I genes. Unique identification patterns for 201 known HLA-A, HLA-B, and HLA-Cw alleles were generated by the use of only 40 probes, which were targeted at these common motifs. The unambiguous identification of the alleles was achieved by the development of a new and powerful allelic separation technique that allows isolation of single alleles after amplification. To validate the method, we have used locus-specific primers to amplify exons 2 and 3 of HLA-A, HLA-B, and HLA-Cw loci from 22 heterozygous and 41 homozygous cell lines. After amplification, the allelic fragments from each locus were separated, blotted, and hybridized with the 40 probes. In all cases, the allelic products could be separated and 81 different class I alleles, 33 HLA-A, 30 HLA-B, and 18 HLA-Cw, were identified according to the predicted probe hybridization patterns.

HLA-Cw allele analysis by PCR-restriction fragment length polymorphism: study of known and additional alleles.

We describe a technique for HLA-Cw genotyping by digestion of PCR-amplified genes with restriction endonucleases. Locus-specific primers selectively amplified HLA-Cw sequences from exon 2 in a single PCR that avoided coamplification of other classical and nonclassical class I genes. Amplified DNAs were digested with selected enzymes. Sixty-three homozygous cell lines from International Histocompatibility Workshop X and 113 unrelated individual cells were genotypes for HLA-Cw and compared with serology. The present protocol can distinguish 23 alleles corresponding to the known HLA-Cw sequences. Genotyping of serologically undetectable alleles (HLA-Cw Blank) and of heterozygous cells was made possible by using this method. Six additional HLA-Cw alleles were identified by unusual restriction patterns and confirmed by sequencing; this observation suggests the presence of another family of allele-sharing clusters in the HLA-B locus. This PCR-restriction endonuclease method provides a simple and convenient approach for HLA-Cw DNA typing, allowing the definition of serologically undetectable alleles, and will contribute to the evaluation of the biological role of the HLA-C locus.

Defense BW-CW decontamination manual.

"15 August 1955."

Operator and organizational maintenance fault isolation manual : improved CW acquisition radar AN/MPQ-55, (Improved HAWK Air Defense Guided Missile System).

"September 1980."

Portrait of Marjorie M. Post painted by Channing Hare, 1961 (given to CW Post College)

2 scans - first as print looks today (it has color shifted - badly - over time), 2nd as it looks with color correction applied by scanner

Integrating in silico and in vitro analysis of peptide binding affinity to HLA-Cw*0102:a bioinformatic approach to the prediction of new epitopes

Predictive models of peptide-Major Histocompatibility Complex (MHC) binding affinity are important components of modern computational immunovaccinology. Here, we describe the development and deployment of a reliable peptide-binding prediction method for a previously poorly-characterized human MHC class I allele, HLA-Cw*0102.

Broadly tunable CW green-to-red laser source based on frequency doubling of a quantum-dot external cavity diode laser in a PPKTP waveguide

Here we present a compact tunable all-room-temperature frequency-doubling scheme, using a periodically poled potassium titanyl phosphate (PPKTP) waveguide and a QD-ECDL. A broad wavelength tunability of the second harmonic generated light (SHG) in the spectral region between 567.7 and 629.1 nm was achieved, with maximum conversion efficiencies in range of 0.34%-7.9%. The maximum output power for the SHG light was 4.11 mW at 591.5 nm, achieved for 52 mW of launched pump power at 1183 nm, resulting in a conversion efficiency of 7.9%.

Generation of CW tunable visible light by SHG of QD laser in a PPKTP waveguide

We demonstrate a CW tunable compact all-room-temperature laser system in the visible spectral region from 567.7 nm to 629.1 nm, by frequency doubling in a periodically-poled KTP waveguide crystal using a tunable quantum-dot external-cavity diode laser.

Orange light generation from a PPKTP waveguide end pumped by a cw quantum-dot tunable laser diode

A compact all-room-temperature frequency-doubling scheme generating cw orange light with a periodically poled potassium titanyl phosphate waveguide and a quantum-dot external cavity diode laser is demonstrated. A frequency-doubled power of up to 4.3 mW at the wavelength of 612.9 nm with a conversion efficiency exceeding 10% is reported. Second harmonic wavelength tuning between 612.9 nm and 616.3 nm by changing the temperature of the crystal is also demonstrated. © Springer-Verlag 2010.

Power-controlled phase-matching and instability of CW propagation in multicore optical fibers with a central core

We present modulation instability analysis including azimuthal perturbations of steady-state continuous wave (CW) propagation in multicore-fiber configurations with a central core. In systems with a central core, a steady CW evolution regime requires power-controlled phase matching, which offers interesting spatial-division applications. Our results have general applicability and are relevant to a range of physical and engineering systems, including high-power fiber lasers, optical transmission in multicore fiber, and systems of coupled nonlinear waveguides. © 2013 Optical Society of America.

Revealing statistical properties of quasi-CW fibre lasers in bandwidth-limited measurements

We introduce a general technique how to reveal in experiments of limited electrical bandwidth which is lower than the optical bandwidth of the optical signal under study, whether the statistical properties of the light source obey Gaussian distribution or mode correlations do exist. To do that one needs to perform measurements by decreasing the measurement bandwidth. We develop a simple model of bandwidth-limited measurements and predict universal laws how intensity probability density function and intensity auto-correlation function of ideal completely stochastic source of Gaussian statistics depend on limited measurement bandwidth and measurement noise level. Results of experimental investigation are in good agreement with model predictions. In particular, we reveal partial mode correlations in the radiation of quasi-CW Raman fibre laser.

Influence of the generated power, measurement bandwidth, and noise level on intensity statistics of a quasi-CW Raman fiber laser

In the present paper we numerically study instrumental impact on statistical properties of quasi-CW Raman fiber laser using a simple model of multimode laser radiation. Effects, that have the most influence, are limited electrical bandwidth of measurement equipment and noise. To check this influence, we developed a simple model of the multimode quasi- CW generation with exponential statistics (i.e. uncorrelated modes). We found that the area near zero intensity in probability density function (PDF) is strongly affected by both factors, for example both lead to formation of a negative wing of intensity distribution. But far wing slope of PDF is not affected by noise and, for moderate mismatch between optical and electrical bandwidth, is only slightly affected by bandwidth limitation. The generation spectrum often becomes broader at higher power in experiments, so the spectral/electrical bandwidth mismatch factor increases over the power that can lead to artificial dependence of the PDF slope over the power. It was also found that both effects influence the ACF background level: noise impact decreases it, while limited bandwidth leads to its increase. © (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.