Concreto com agregados reciclados de borracha de pneu: resistência à compressão a altas temperaturas

A sustentabilidade é uma preocupação para a indústria da construção civil, uma vez que é responsável pelo consumo de uma grande quantidade de recursos naturais e por impactos ambientais. Assim, a utilização de agregados reciclados em substituição dos agregados naturais mostra-se benéfica ao minimizar os impactos ambientais, o consumo de recursos naturais e na redução de alguns problemas urbanos associados à acumulação de lixo. Neste contexto, o trabalho de investigação desenvolvido teve como objetivo o estudo da utilização de agregados reciclados de borracha de pneu na composição do concreto, contribuindo com uma alternativa sustentável para o problema do depósito de pneus após a sua vida útil. O trabalho laboratorial realizado compreendeu ensaios de resistência à compressão do concreto. Estudaram-se três composições de concreto, uma composição de referência, uma composição com uma taxa de substituição de 15% e outra com taxa de substituição de 30% de agregados naturais por agregados reciclados de borracha de pneu usados. Os diferentes provetes de concreto foram submetidos a vários níveis de carregamento (0,15fcd; 0,3fcd e 0,7fcd) e a diferentes níveis de temperatura (20, 300, 500 e 700ºC). Os resultados obtidos permitiram verificar que o aumento da percentagem de agregados de borracha reciclados de pneu inserido no concreto conduz a um aumento do controlo de fendilhação e minimiza o surgimento de fissuração de origem térmica.

Direct and general support maintenance repair parts and special tools list (including depot maintenance repair parts and special tools) : loader, scoop type, pneu-tired, diesel engine driven, hinged frame steer with 2 1/2 cubic yard multi-purpose bucket, (Allis-Chalmers model 645M), FSN 3805-051-9359.

Includes index.

Direct and general support and depot maintenance manual : loader scoop type, pneu tired, diesel engine driven, hinged frame steer ...

Includes index.

Operator and organizational maintenance manual : loader, scoop type, pneu-tired, diesel engine driven, hinged frame steer with 2 1/2 cu yd multi-purpose bucket, Allis-Chalmers model 645M, FSN 3805-051-9359.

"July 1968."

Organizational maintenance repair parts and special tools list : loader, scoop type, pneu-tired, diesel engine driven, hinged frame steer, with 2 1/2 cubic yard multi-purpose bucket (Allis-Chalmers model 645M) FSN 3805-051-9359.

"August 1974."

Direct and general support and depot maintenance manual : loader scoop type, pneu tired, diesel engine driven, hinged frame steer, with 2-1/2 cu yd multi-purpose bucket, Allis Chalmers model 645M, FSN 3805-051-9359.

Includes index.

Operator and organizational maintenance manual : loader, scoop type, pneu-tired, diesel engine driven, hinged frame steer with 2 1/2 cu yd multi-purpose bucket, Allis-Chalmers model 645M, FSN 3805-051-9359.

"July 1968."

Viabilidade técnica da fabricação de compósito utilizando fibra de pneu na fabricação de blocos intertravados

This work aims to demonstrate the feasibility of a ceramic composite containing fiber in the rubber manufacturing interlocking blocks. Gravel, sand, cement, rubber and fiber: the processes of manufacture and assembly of blocks produced and the various formulations studied with different proportions between the constituent elements were addressed. Mechanical properties were determined for the different formulations, compressive strength, diametral compressive strength, water absorption and apparent density, obeying the rules related to each property. It was concluded that the addition of rubber fiber gave the concrete studied resistance lower than conventional concrete which can be verified on the microstructural analysis obtained by SEM, which revealed the presence of pores and the low adhesion between the fiber and the matrix compression (tire fiber / cement paste). The composite of more viable tire BCPB1 (1/2) fiber can be used in places requests as light squares, pavements, roads and other cycle as well as in the manufacture of the curb and gutter, by having compressive strength in about 20 MPa

Use of CPAP to Reduce Arterial Stiffness in Moderate-to-Severe Obstructive Sleep Apnoea, Without Excessive Daytime Sleepiness (STIFFSLEEP): an Observational Cohort Study Protocol

INTRODUCTION: Sleepiness is a cardinal symptom in obstructive sleep apnoea (OSA) but most patients have unspecific symptoms. Arterial stiffness, evaluated by pulse wave velocity (PWV), is related to atherosclerosis and cardiovascular (CV) risk. Arterial stiffness was reported to be higher in patients with OSA, improving after treatment with continuous positive airway pressure (CPAP). This study aims to assess whether the same effect occurs in patients with OSA and without sleepiness. METHODS AND ANALYSIS: This observational study assesses the CV effect of CPAP therapy on a cohort of patients with moderate-to-severe OSA; the effect on the subcohorts of sleepy and non-sleepy patients will be compared. A systematic and consecutive sample of patients advised CPAP therapy will be recruited from a single outpatient sleep clinic (Centro Hospitalar de Lisboa Central-CHLC, Portugal). Eligible patients are male, younger than 65 years, with confirmed moderate-to-severe OSA and apnoea-hypopnea index (AHI) above 15/hour. Other sleep disorders, diabetes or any CV disease other than hypertension are exclusion criteria. Clinical evaluation at baseline includes Epworth Sleepiness Scale (ESS), and sleepiness is defined as ESS above 10. OSA will be confirmed by polygraphic study (cardiorespiratory, level 3). Participants are advised to undertake an assessment of carotid-femoral PWV (cf-PWV) and 24 hours evaluation of ambulatory blood pressure monitoring (ABPM), at baseline and after 4 months of CPAP therapy. Compliance and effectiveness of CPAP will be assessed. The main outcome is the variation of cf-PWV over time.

Análise do comportamento reológico de pastas de cimento contendo resíduos de pneu para poços de petróleo

The low tenacity presented by the Portland cement pastes used in the oil wells cementation has been motivating several researches with attention focused on alternative materials. Additives have been developed to generate flexible pastes with mechanical resistance capable to support the expansions and retractions of the metallic covering of the wells that submit to the steam injection, technique very used to increase the recovery factor in oil reservoirs with high viscosity. A fresh paste with inadequate rheological behavior may commit the cementation process seriously, involving flaws that affect the performance of the paste substantially in the hardened state. This work proposes the elaboration and the rheological analysis of Portland cement pastes with addition of residues of rubber tire in several proportions, with the aim of minimizing the damages provoked in the hem cementing of these wells. By thermogravimetric analysis, the particles of eraser that go by the sieve of 0,5mm (35 mesh) opening and treated superficially with NaOH solution of 1 mol/L presented appropriate thermal resistance for wells that submit to thermal cyclic. The evaluation of the study based on the results of the rheological analysis of the pastes, complemented by the mechanical analysis, thickening, stability, tenor of free water and filtrate loss, being used as parameter a paste reference, without rubber addition. The results showed satisfactory rheology, passive of few corrections; considerable loss of mechanical resistance (traction and compression), compensated by earnings of tenacity, however with established limits for its application in oil wells; satisfactory stability, free water and thickening time