Optimization of neutral hydrolysis reaction of post-consumer PET for chemical recycling

The neutral hydrolysis reaction of post-consumer poly(ethylene terephthalate) in solid state was studied through the reaction of the polymer with water at the molar ratio 1:91 with autogenous pressure. Two sizes of post-consumer PET flakes and temperatures of 135 °C, 170°C and 205°C with pressures of 4.0 atm, 7.5 atm and 13.5 atm, respectively, were considered. With reaction time equal to 6h, the method reached 99% depolymerization at 205°C, 8.2% at 170 °C and 1.7% at 135°C. The reaction extension was measured by separating the terephthalic acid formed in the process and calculating by gravimetry how much material could still be reacted. Through the viscosimetry of diluted, solutions and the counting of carboxylic end groups in the remaining material from the gravimetric assay, it was possible to suggest that the reaction occurs randomly and in the whole volume of the polymeric particle and not solely on the surface. The terephthalic acid obtained and then purified was characterized by elemental analysis, magnetic nuclear resonance, size and panicle size distribution and spectrophotometry in the visible spectrum, and it was similar to the petrochemical equivalent, with purity recorded in carbon base equal to 99.9%.

Zinc and lead content and availability in Brazilian soil contaminated with residue of a secondary smelting lead recycling plant

The sequential extraction procedure of Zinc and lead performed in a Brazilian soil showed that it presents high pollution potential once over 90% of total lead is present in fractions where the metals can be easily mobilized. The fraction contents are as follow: F1 = 174 and 15 mg kg-1; F2 = 3155 and 9.7 mg kg -1; F3 = 99 and 1.6 mg kg -1; Residual fraction = 38 and 5.5 mg kg -1 for lead and zinc, respectively. The comparison with non contaminated soil only Pb 2+ concentration is above its intervention reference concentration, 900 mg kg -1.

An emergy-based evaluation of a reverse logistics network for steel recycling

Efficient implementation of recycling networks requires appropriate logistical structures for managing the reverse flow of materials from users to producers. The steel sheet distributor studied had established a protocol for scrap recovery with the steel plant and its customers. The company invested in producing containers, hiring a specialized labor force and in purchasing trucks for container transportation to implement the logistics network for recycling. That network interconnected the company with two kinds of customers: the ones returning scrap and the ones who preferred to continue business-as-usual. The logistical network was analyzed using emergy synthesis, and the data obtained were used to evaluate and compare the system's environmental costs and benefits from the perspective of the distributor and the steel plant operator. The use of emergy ternary diagrams provided a way to assess recycle strategies to compare the relative economic and environmental benefits of the logistical network implemented. The minimum quantity of scrap that the distributor must recover to improve environmental benefits was determined allowing decision on whether it is worth keeping the system running. The new assessment method proposed also may help policy-makers to create strategies to reward or incentive users of reverse logistics, and help to establish regulations, by decreasing taxes or stimulating innovation, for effectively implement the National Policy on Solid Waste. (C) 2013 Elsevier Ltd. All rights reserved.

Natural rubber/leather waste composite foam: A new eco-friendly material and recycling approach

This article describes a new approach of recycling the leather waste (shavings) using it as filler in natural rubber foams composites. The foams were prepared using different amounts of leather waste (0-60 parts per hundred of rubber) and submitted to morphological (SEM microscopy) and mechanical analyses (cyclic stress-strain compression). The increase of leather shavings on the composite causes an increase of viscosity in the mixture, which reflects in the foaming process. This results in smaller and fairly uniform cells. Furthermore, expanded rubber has the biggest cell size, with more than 70% of cell with 1000 mu m, while the composite with the higher concentration of leather has around 80% of total number of cells with 100-400 mu m. The mechanical parameters were found to depend on the leather dust concentration. Moreover, the stiffness rises with the increase of leather shavings; consequently, the compression force for expanded rubber was 0.126 MPa as well as the composite with higher concentration of leather was 7.55 MPa. (c) 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41636.

Recycling scrap automotive heat shield insulation material

Automotive heat shields are usually composed of two metal sheets enclosing an insulating material with a paper-like texture that contains refractory ceramic particles. This article discusses the results achieved by recycling the scrap automotive insulation that is discarded in landfills, using the same concept as paper recycling. For comparison with the original product, tests of thickness, bulk density, weight loss on ignition, tensile strength, compressibility, and recovery were performed on recycled materials produced in a so-called "manual" process (involving little automation and performed in adapted facilities) without pressing, and pressed once, twice, and four times. Materials recycled in a so-called "industrial" process (in a paper recycling plant) without pressing, and pressed once were also tested. The recycled materials can be considered approved with respect to the main requirement, thermal insulation, since they dissipated the under-hood temperature by more than 300 A degrees C (like the original product). Like the heat insulation tests, the thermogravimetric analysis suggested that the recycled materials showed higher stability than the original product. Thermogravimetric, microscopy, and energy dispersive spectroscopy analyses indicated that the structural and compositional characteristics of the original product were preserved after recycling.

Catalyst Recovery and Recycling Facilitated by Magnetic Separation: Iridium and Other Metal Nanoparticles

The immobilization of metal nanoparticles in magnetic responsive solids allows the easy, fast, and clean separation of catalysts; however, the efficiency of this separation process depends on a strong metalsupport interaction. This interaction can be enhanced by functionalizing the support surface with amino groups. Our catalyst support contains an inner core of magnetite that enables the magnetic separation from liquid systems and an external surface of silica suitable for further modification with organosilanes. We report herein that a magnetically recoverable amino-functionalized support captured iridium species from liquid solutions and produced a highly active hydrogenation catalyst with negligible metal leaching. An analogous Ir0 catalyst prepared with use of a nonfunctionalized support shows a higher degree of metal leaching into the liquid products. The catalytic performance in the hydrogenation of alkenes is compared with that of Rh and Pt catalysts.

Exogenous ornithine is an effective precursor and the delta-ornithine amino transferase pathway contributes to proline accumulation under high N recycling in salt-stressed cashew leaves

The role of the delta-ornithine amino transferase (OAT) pathway in proline synthesis is still controversial and was assessed in leaves of cashew plants subjected to salinity. The activities of enzymes and the concentrations of metabolites involved in proline synthesis were examined in parallel with the capacity of exogenous ornithine and glutamate to induce proline accumulation. Proline accumulation was best correlated with OAT activity, which increased 4-fold and was paralleled by NADH oxidation coupled to the activities of OAT and Delta(1)-pyrroline-5-carboxylate reductase (P5CR), demonstrating the potential of proline synthesis via OAT/P5C. Overall, the activities of GS. GOGAT and aminating GDH remained practically unchanged under salinity. The activity of P5CR did not respond to NaCl whereas Delta(1)-pyrroline-5-carboxylate dehydrogenase was sharply repressed by salinity. We suggest that if the export of P5C from the mitochondria to the cytosol is possible, its subsequent conversion to proline by P5CR may be important. In a time-course experiment, proline accumulation was associated with disturbances in amino acid metabolism as indicated by large increases in the concentrations of ammonia, free amino acids, glutamine, arginine and ornithine. Conversely, glutamate concentrations increased moderately and only within the first 24 h. Exogenous feeding of ornithine as a precursor was very effective in inducing proline accumulation in intact plants and leaf discs, in which proline concentrations were several times higher than glutamate-fed or salt-treated plants. Our data suggest that proline accumulation might be a consequence of salt-induced increase in N recycling, resulting in increased levels of ornithine and other metabolites involved with proline synthesis and OAT activity. Under these metabolic circumstances the OAT pathway might contribute significantly to proline accumulation in salt-stressed cashew leaves. (C) 2011 Elsevier GmbH. All rights reserved.

Recycling of the high valence states of heme proteins by cysteine residues of thimet-oligopeptidase

The peptidolytic enzyme THIMET-oligopeptidase (TOP) is able to act as a reducing agent in the peroxidase cycle of myoglobin (Mb) and horseradish peroxidase (HRP). The TOP-promoted recycling of the high valence states of the peroxidases to the respective resting form was accompanied by a significant decrease in the thiol content of the peptidolytic enzyme. EPR (electron paramagnetic resonance) analysis using DBNBS spin trapping revealed that TOP also prevented the formation of tryptophanyl radical in Mb challenged by H2O2. The oxidation of TOP thiol groups by peroxidases did not promote the inactivating oligomerization observed in the oxidation promoted by the enzyme aging. These findings are discussed towards a possible occurrence of these reactions in cells.

Beziehungen zwischen den Xanthophyllzyklen und der Biosynthese von Lichtsammelxanthophyllen in Chlorophyll a/c-haltigen Algen

Zusammenfassung:In Chlorophyll(Chl) a/c-haltigen Algen leisten Xanthophylle einen wesentlichen Beitrag zur Lichtsammlung. Daneben finden sich weitere Xanthophylle, die an einem Schutzmechanismus bei überoptimalem Lichtangebot beteiligt sind, dem sog. Xanthophyllzyklus. Ein Teil der Chl a/c-haltigen Algen besitzt den auch bei Höheren Pflanzen anzutreffenden Violaxanthin/Antheraxanthin/Zeaxanthin-(Vx/Ax/Zx-)Zyklus. In anderen Gruppen wie den Dinophyta, Haptophyta und den Kieselalgen (Bacillariophyceae) ist statt dessen der Diadinoxanthin/Diatoxanthin-(Ddx/Dtx-)Zyklus zu finden. Die vorliegende Arbeit zeigt, daß schwachlichtadaptierte Turbidostatkulturen der Kieselalge Phaeodactylum tricornutum unter mehrstündiger Starklichtinkubation neben den Pigmenten des Ddx/Dtx-Zyklus auch die des Vx/Ax/Zx-Zyklus akkumulieren. Außerdem läßt sich ein dritter Xanthophyllzyklus zwischen beta-Cryptoxanthin (Cx) und beta-Cryptoxanthin-Epoxid (CxE) nachweisen, doch liegen diese beiden Pigmente nur in sehr geringen Konzentrationen vor. Für die Starklichtakkumulation von Zx ist eine hohe Deepoxidase-Aktivität und die de-novo-Synthese von Carotinoiden erforderlich. Aus Zx wird im anschließenden Schwachlicht über die Intermediate Vx und Ddx das Lichtsammelxanthophyll Fucoxanthin (Fx) synthetisiert. Dies bestätigt auch ein Vergleich der Kinetiken der einzelnen Umwandlungsschritte mit den anhand eines Modells der Xanthophyllbiosynthesewege ermittelten theoretischen Ratenkonstanten. Dieser Vergleich legt jedoch nahe, daß bei der Vx-Synthese aus beta-Carotin CxE anstelle von Zx involviert sein könnte. Eine Untersuchung weiterer Chl a/c-haltiger Algen mit Ddx/Dt-Zyklus ergab, daß sie unter Starklicht ebenfalls den Vx/Ax/Zx-Zyklus akkumulieren. Weiterhin sind, mit Einschränkungen bei den Dinophyten und Xanthophyceen, alle untersuchten Algen in der Lage, die unter Starklicht akkumulierten Xanthophyllzykluspigmente im nachfolgenden Schwachlicht zur Synthese des jeweiligen Lichtsammelxanthophylls zu nutzen. Unter energetischen Gesichtspunkten stellt dieses Pigment-Recycling insbesondere für die Fx-haltigen Algen einen Vorteil dar, da ihre Lichtsammelkomplexe im Vergleich zu denen der Höheren Pflanzen etwa die doppelte Anzahl an Xanthophyllen binden.

In-vitro-Rekonstitution des vesikulären Transportes zu Recycling-Endosomen und Analyse von sekretiertem Caveolin-1 aus humanen Prostatakrebszellen

Der Transferrin-Zyklus ist ein wichtiges Modell für denintrazellulären Transport, daher sollten in der vorliegendenArbeit einzelne, immer noch unverstandene Prozesse desvesikulären, intrazellulären Transportes durch dieCharakterisierung einen in vitro-Transportassay untersuchtwerden. Der Ansatz eines in vitro-Systems wurde deshalbgewählt, um mit Experimenten in denen einzelne Faktoren undbestimmte Konditionen untersucht werden sollten, diese unterdefinierten, reproduzierbaren Konditionen durchzuführen, diein einem in vivo-System kaum zu gewährleisten sind. Ohne denEinfluss von „störenden“, weil unkontrollierten Faktoren,wie es bei in vivo-Systemen der Fall ist, konnte imvorliegende Ansatz der Transport zu immunisoliertenRecycling-Endosomen (die Isolierung erfolgte hierbei mitanti-Rab11-Antikörpern, einem Marker fürRecycling-Endosomen) unter bestimmten Bedingungen untersuchtwerden. Dabei wurde als Marker Acridinium-markiertesTransferrin gewählt, welches in Zellen internalisiert wurde.Die Spezifität des Transportes in dem zellfreien System warhierbei sehr hoch, wie Kontrollexperimente inImmunisolierungsansätzen ohne Rab11-Antikörper zeigten. ImRahmen einer ersten Charakterisierung des Transportassayswurden essentielle, für den in vivo-Transport essentielleParameter auch in den in vitro-Experimenten untersucht.Hierbei wurde zum einen der Faktor Temperatur gewählt, daTransport in Zellen bei 4°C in der Regel zum Erliegen kommt.Dies konnte auch in dem vorgestellten System gezeigt werden.Ein weiterer, essentieller Faktor ist Energie in Form vonATP. ATP-Depletion wurde in den Experimenten durch Hinzugabeeines ATP-erschöpfenden Systems erzielt. Auch hier zeigteder Transport von Ac-Tfn zu Recycling-Endosomen eine starkeInhibierung. Mit Hilfe des so charakterisierten Assayskonnten anschließend weitere Experimente durchgeführtwerden, die den Einfluss von bestimmten Reagenzien undKonditionen auf den Transport untersuchten. So zeigte derTransport in Zeitverlaufsexperimenten einen Anstieg desTransportes bis 30 Minuten, bei 30 Minuten wurde ein Maximumerreicht. Nach Erreichen dieses Maximums war nachfolgendeine leichte Abnahme des Transfers von Ac-Tfn zu denRecycling-Endosomen zu beobachten. Da Rab-Proteine alsSchlüsselregulatoren für den intrazellulären, vesikulärenTransport gelten, und die Immunisolierungen mitanti-Rab11-Antikörpern durchgeführt wurden, wurde somit auchder Einfluss dieser GTPasen auf das Transportsystemuntersucht. Zugegebenes GDI, welches in der Lage istRab-Proteine in GDP-gebundener Form von spezifischenMembranen zu extrahieren, und daher ein gut untersuchterInhibitor von Rab-Funktionen ist, konnte auch in diesemTransportassay den Transport von Transferrin inhibieren. Einweiterer Aspekt war die Rolle des Cytoskelettes imintrazellulären Transport. Da in früheren Untersuchungen(Trischler et al., 1999) Aktin auf Recycling-Endosomengefunden wurde, erfolgte in diesen Arbeiten eineKonzentration auf die Rolle des Aktin in diesenTransportprozessen. Durch die Zugabe von Cytochalasin D, daseinen Aufbau von Aktingerüsten verhindert, wurde derTransport ebenfalls inhibiert. Durchaffinitätschromatographische Aufreinigungen konnte einestarke Interaktion von Aktin an immobilisiertes Rab11gezeigt werden. Die eluierten Fraktionen, die neben Aktinnoch weitere, jedoch unbekannte Proteine enthielten, konntenin dem in vitro-Fusionsassay eingesetzt werden und führtendort zu einer Stimulation des Transportes. Neben demgefundenen Aktin, könnten somit noch weitere, unbekannteProteine in dem Proteingemisch wichtige Funktionen imintrazellulären, vesikulären Transport übernehmen. EineIdentifizierung dieser Proteine ist dabei für weiterführendeArbeiten essentiell.Caveolin-1, Markerprotein für die Caveolae-Membrandomänewird überraschenderweise von verschiedenen Zellensekretiert. Da Caveolin-1 normalerweise ein integralesMembranprotein ist, wird von einer Sekretion alsLipoproteinpartikel ausgegangen. Die Rolle diesessekretierten Partikels ist unbekannt, wobei einige Autoreneine Funktion als autokrinen/ parakrinen Faktor vorschlagen(Tahir et al., 2001). In der vorliegenden Arbeit solltendiese Partikel daher aufgereinigt und erstmalscharakterisiert werden. Die Partikel wurden aus transienttransfizierten LNCaP-Zellen gewonnen, die Cav-1 in dasserumfreie Medium abgaben. In einer erstenGrößenuntersuchung durch FPLC konnte ein Molekulargewichtzwischen 2.000.000 Da und 660.000 Da bestimmt werden. DieseResultate konnten durch den Ansatz der nativenBlau-Gelelektrophorese bestätigt werden. In einem weiterenAnsatz, der die Dichte der Partikel charakterisieren sollte,wurde in zwei unterschiedlichen Ansätzen (CsCl-, sowieOptiprep Dichtezentrifuagtion) eine ähnliche Dichte desPartikels wie HDL ermittelt. Um eine stärkere Aufreinigungder Partikel zu erzielen, wurde eine Aufreinigung mit Hilfevon Ni-NTA-Agarose durchgeführt. Dies war möglich, denn diebei der Transfektion verwendete C-DNA trug einen His6-tag.Die so aufgereingten Partikel verloren auch nach derNi-NTA-Chromatographie nicht ihre biochemischenEigenschaften, wie in überprüfenden CsCl-Gradienten zu sehenwar. Die Partikel konnten anschließend zum ersten Mal inelektronenmikroskopischen Aufnahmen (Negativkontrastierung)visualisiert werden. Ein weiteres Ziel dieser Arbeit war es,zu untersuchen ob auf Cav-1 Lipoproteinpartikeln nochweitere Proteine zu finden waren. Durch eine kombinierteAufreinigung über Ni-NTA Chromatographie undCsCl-Dichtezentrifugation und im Vergleich mit demAusgangsmaterial konnten in der Silberfärbung Proteinbandenerkannt werden, die wie Cav-1 in den Fraktionen angereichertvorlagen. Eine massenspektroskopische Identifikation einerder Banden ergab, dass es sich hierbei um nm 23(Nukleosid-diphosphat-kinase) handelte, einem Protein dasebenfalls von verschiedenen Tumoren sekretiert wird.

Recycling of end of life concrete fines (0 - 4 mm) into silica and cement

The purpose of this work is to find a methodology in order to make possible the recycling of fines (0 - 4 mm) in the Construction and Demolition Waste (CDW) process. At the moment this fraction is a not desired by-product: it has high contaminant content, it has to be separated from the coarse fraction, because of its high water absorption which can affect the properties of the concrete. In fact, in some countries the use of fines recycled aggregates is highly restricted or even banned. This work is placed inside the European project C2CA (from Concrete to Cement and Clean Aggregates) and it has been held in the Faculty of Civil Engineering and Geosciences of the Technical University of Delft, in particular, in the laboratory of Resources And Recycling. This research proposes some procedures in order to close the loop of the entire recycling process. After the classification done by ADR (Advanced Dry Recovery) the two fractions "airknife" and "rotor" (that together constitute the fraction 0 - 4 mm) are inserted in a new machine that works at high temperatures. The temperatures analysed in this research are 600 °C and 750 °C, cause at that temperature it is supposed that the cement bounds become very weak. The final goal is "to clean" the coarse fraction (0,250 - 4 mm) from the cement still attached to the sand and try to concentrate the cement paste in the fraction 0 - 0,250 mm. This new set-up is able to dry the material in very few seconds, divide it into two fractions (the coarse one and the fine one) thanks to the air and increase the amount of fines (0 - 0,250 mm) promoting the attrition between the particles through a vibration device. The coarse fraction is then processed in a ball mill in order to improve the result and reach the final goal. Thanks to the high temperature it is possible to markedly reduce the milling time. The sand 0 - 2 mm, after being heated and milled is used to replace 100% of norm sand in mortar production. The results are very promising: the mortar made with recycled sand reaches an early strength, in fact the increment with respect to the mortar made with norm sand is 20% after three days and 7% after seven days. With this research it has been demonstrated that once the temperature is increased it is possible to obtain a clean coarse fraction (0,250 - 4 mm), free from cement paste that is concentrated in the fine fraction 0 - 0,250 mm. The milling time and the drying time can be largely reduced. The recycled sand shows better performance in terms of mechanical properties with respect to the natural one.

Examining the Justification for Residential Recycling

Municipalities in the United States have for the past two decades initiated two policies to reduce residential solid waste generation by increasing recycling. The first policy, implemented in over 4,000 municipalities in the United States, requires households to pay a fee for each unit of garbage presented at the curb for collection. The second policy, initiated in 8,875 municipalities, subsidizes household recycling efforts by providing free curbside collection of certain recyclable materials. Both initiatives serve as examples of incentive-based environmental policies favored by many economists. But before economists can celebrate this wide-spread adoption of incentive-based environmental policies, further examination reveals that potentially inefficient command and control policies have been more instrumental in promoting recycling than might be commonly known. This article examines the empirical lessons gained from studying twenty years of solid waste policy in the United States and argues for the replacement of several state recycling mandates with a system of state and/or national landfill taxes.

Explaining the Growth in Municipal Recycling Programs: The Role of Market and Non-Market Factors

The implementation of thousands of municipal recycling programs in the United States has increased recycling’s portion of solid waste from 10% to 30% over the past decade. But the lack of accurate data has spurred a debate over whether the growth in recycling can be attributed to market or nonmarket factors. To address this issue, this article conducts a benefit-cost analysis of a municipal recycling program. Results suggest recycling is costly. So why, then, does it remain popular? This article suggests that local governments could be responding to households that perceive a benefit from recycling services. These benefits are estimated with a contingent valuation survey.