Regioselective Thiolation of Arenes and Heteroarenes: C-H Functionalization Strategy for C-S Bond Formation

A facile transition-metal-free oxidative cross-dehydrogenative coupling reaction involving selective formation of a C-S bond leading to the synthesis of arylthiobenzoxazoles, heteroarylthiobenzoxazoles, and arylthiobenzothiazoles has been described. This highly regioselective C-H functionalization reaction with electron-rich aromatic systems including heteroaromatics is achieved by reversing the reactivity of sulfur in the presence of a suitable oxidant and strong acid.

Room Temperature Growth of Ultrathin Au Nanowires with High Areal Density over Large Areas by in Situ Functionalization of Substrate

Although ultrathin Au nanowires (similar to 2 nm diameter) are expected to demonstrate several interesting properties, their extreme fragility has hampered their use in potential applications. One way to improve the stability is to grow them on substrates; however, there is no general method to grow these wires over large areas. The existing methods suffer from poor coverage and associated formation of larger nanoparticles on the substrate. Herein, we demonstrate a room temperature method for growth of these nanowires with high coverage over large areas by in situ functionalization of the substrate. Using control experiments, we demonstrate that an in situ functionalization of the substrate is the key step in controlling the areal density of the wires on the substrate. We show that this strategy works for a variety of substrates ranging like graphene, borosil glass, Kapton, and oxide supports. We present initial results on catalysis using the wires grown on alumina and silica beads and also extend the method to lithography-free device fabrication. This method is general and may be extended to grow ultrathin Au nanowires on a variety of substrates for other applications.

Chemical Functionalization of Graphene To Augment Stem Cell Osteogenesis and Inhibit Biofilm Formation on Polymer Composites for Orthopedic Applications

Toward designing the next generation of resorbable biomaterials for orthopedic applications, we studied poly(epsilon-caprolactone) (PCL) composites containing graphene. The role, if any, of the functionalization of graphene on mechanical properties, stem cell response, and biofilm formation was systematically evaluated. PCL composites of graphene oxide (GO), reduced GO (RGO), and amine-functionalized GO (AGO) were prepared at different filler contents (1%, 3%, and 5%). Although the addition of the nanoparticles to PCL markedly increased the storage modulus, this increase was largest for GO followed by AGO and RGO. In vitro cell studies revealed that the AGO and GO particles significantly increased human mesenchymal stem cell proliferation. AGO was most effective in augmenting stem cell osteogenesis leading to mineralization. Bacterial studies revealed that interaction with functionalized GO induced bacterial cell death because of membrane damage, which was further accentuated by amine groups in AGO. As a result, AGO composites were best at inhibiting biofilm formation. The synergistic effect of oxygen containing functional groups and amine groups on AGO imparts the optimal combination of improved modulus, favorable stem cell response, and biofilm inhibition in AGO-reinforced composites desired for orthopedic applications. This work elucidates the importance of chemical functionalization of graphene in polymer composites for biomedical applications.

CH-RES-TOCSY: Enantiomers spectral resolution and measurement of heteronuclear residual dipolar couplings

A new 2D NMR technique cited as CH-RES-TOCSY, for complete unraveling the spectra of enantiomers and for the measurement of structurally important C-HRDC sis reported. The spectral overlap and complexity of peaks were reduced by the blend of selective excitation and homo-decoupling. Differential values of C-H RDCs of enantiomers (R and S) are exploited to separate the enantiomeric peaks. The complete unraveling of the spectra of both the enantiomers is achieved by incorporating a TOCSY mixing blockprior to signal acquisition. The additional application of the method is demonstrated for the assignment of symmetric isomers. (C) 2015 Elsevier B.V. All rights reserved.

Sulfenyiation of beta-Diketones Using C-H Functionalization Strategy

Sulfenylation of beta-diketones is challenging as beta-diketones undergo deacylation after sulfenylation in the reaction medium. The sulfenylation of beta-diketones without deacylation under metal-free conditions at ambient temperature via a cross dehydrogenative coupling (CDC) strategy is reported. The resultant products can be further manipulated to form alpha,alpha-disubstituted beta-diketones and pyrazoles.

High Loading of Pd Nanoparticles by Interior Functionalization of MOFs for Heterogeneous Catalysis

In this report, the issue related to nanoparticle (NP) agglomeration upon increasing their loading amount into metal-organic frameworks (MOFs) has been addressed by functionalization of MOFs with alkyne groups. The alkynophilicity of the Pd2+ (or other noble metals) ions has been utilized successfully for significant loading of Pd NPs into alkyne functionalized MOFs. It has been shown here that the size and loading amount of Pd NPs are highly dependent on the surface area and pore width of the MOFs. The loading amount of Pd NPs was increased monotonically without altering their size distribution on a particular MOF. Importantly, the distinct role of alkyne groups for Pe(2+) stabilization has also been demonstrated by performing a control experiment considering a MOF without an alkyne moiety. The preparation of NPs involved two distinct steps viz. adsorption of metal ions inside MOFs and reduction of metal ions. Both of these steps were monitored by microscopic techniques. This report also demonstrates the applicability of Pd@MOF NPs as extremely efficient heterogeneous catalysts for Heck-coupling and hydrogenation reactions of aryl bromides or iodides and alkenes, respectively.

Arreglos de siembra en el cultivo de la soya (Glycine max L.), variedad CEA-CH-86. Efecto sobre el crecimiento y rendimiento del cultivo

El presente trabajo se realizó con la finalidad de determinar el efecto de diferentes arreglos de siembra (0.3 metro entre surco por 7 plantas por metro lineal; 0.6 metro entre surco por 15 plantas por metro lineal: 0.6 metro entre surco por 18 plantas por metro lineal; O.7 metro entre surco por 25 plantas por metro lineal; 0.8 metro entre surco por 30 plantas por metro lineal y 0.9 metro entre surco por 36 plantas por metro lineal) sobre el crecimiento y rendimiento del cultivo de la soya (Glycine max L) variedad CEA-CH-86, bajo las condiciones ecológicas de la finca La Concepción, Nagarote León. El ensayo se estableció en la siembra de postrera de 1999, utilizándose un diseño de bloques completos al azar con cuatro repeticiones. Se encontró que los componentes de crecimiento (altura, diámetro y hojas por planta) presentaron diferencias a los 50 y 70 días después de la siembra y para las variables evaluadas para el rendimiento y sus principales componentes solamente se encontraron diferencias no significativas para el número de semillas por vainas y peso de mil granos. Los resultados del análisis de varianza indican que el arreglo de siembra 0.6 metro entre surco por 18 plantas por metro lineal obtuvo el mayor rendimiento (2,925.72 kg/ha) y la más alta tasa de retomo marginal {867. 16 por ciento).

Mejoramiento de dos componentes de sistema de producción del cultivo de la soya (Glycine max L.) variedad CEA-CH-86, su efecto sobre el crecimiento y rendimiento del cultivo

El presente trabajo se planificó con la finalidad de mejorar dos componentes del sistema tradicional de producción del cultivo de la soya (Glycine max L.) variedad CEA-CH-86. Por lo tanto, se trabajó con: densidades de siembra y períodos sin y con control de plantas indeseables para encontrar el período crítico de competencia de malezas. Para determinar la densidad óptima de siembra, se estableció un ensayo unifactorial en la época de primera de 2000 en donde se probaron seis densidades de siembra (238 095,250000, 297 619, 357 143, 378 788 y 396 825 plantas/ha. La densidad que indujo al mayor rendimiento se le determinó el período crítico de competencia de malezas, para lo cual se estableció un experimento unifactorial en donde se incluyeron tratamientos sin control y con control de malezas hasta los 20, 40, 60, 80, 100 y 120 dds. De las seis densidades evaluadas, la que dio el mayor rendimiento fue la de 297,619 plantas/ha con una producción de 2,300 kg/ha. Así mismo, se llegó a la conclusión de que el período crítico de competencia de maleza para el cultivo de la soya en la variedad CEA-CH-86 se determinó a partir de los 20 hasta los 60 días después de la siembra.

Evaluación de dosis de fósforo y potasio en el cultivo de la soya (Glycine max (L) Merr), variedad CEA-CH-86, su efecto sobre el crecimiento y rendimiento y su análisis económico

El presente trabajo se realizó con la finalidad de determinar el efecto de diferentes dosis de fósforo y potasio (10 kg/ha de fósforo – 30 kg/ha de potasio; 20 kg/ha de fósforo – 40 kg/ha de potasio; 30 kg/ha de fósforo – 50 kg/ha de potasio; 40 kg/ha de fósforo – 60 kg/ha de potasio) y un tratamiento testigo (sin aplicación de fósforo y potasio) sobre el crecimiento y rendimiento del cultivo de la soya ( Glycine max (L) Merr.) variedad CEA- CH-86, bajo las condiciones ecológicas de la finca La Concepción, ubicada en el municipio de Nagarote departamento de León. El ensayo se estableció en la siembra de postrera del 2003, utilizándose un diseño de bloques completos al azar con cuatro repeticiones. Se encontró que los componentes del crecimiento (altura, diámetro y hojas por planta) presentaron diferencias significativ as a los 50 y 70 días después de la siembra, y para las variables correspondientes a los componentes del rendimiento y sus principales componentes solamente se encontraron diferencias no significativas para el número de granos por vainas. Los resultados del análisis de varianza indicaron que cuando se aplicó 30 kg/ha de fósforo – 50 kg/ha de potasio se obtuvo el mayor rendimiento (1 930 kg/ha), el mayor beneficio neto (1 361.37 C$ / ha) y la mas alta tasa de retorno marginal (197.10 por ciento).

Fabrication and bio-functionalization of tetrahedral amorphous carbon thin films for bio sensor applications

Tetrahedral amorphous carbon (ta-C) thin films are a promising material for use as biocompatible interfaces in applications such as in-vivo biosensors. However, the functionalization of ta-C film surface, which is a pre-requisite for biosensors, remains a big challenge due to its chemical inertness. We have investigated the bio-functionalization of ta-C films fabricated under specific physical conditions through the covalent attachment of functional biomolecular probes of peptide nucleic acid (PNA) to ta-C films, and the effect of fabrication conditions on the bio-functionalization. The study showed that the functional bimolecular probes such as protected long-chain ω-unsaturated amine (TFAAD) can be covalently attached to the ta-C surface through a well-defined structure. With the given fabrication process, electrochemical methods can be applied to the detection of biomolecular interaction, which establishes the basis for the development of stable, label-free biosensors. © 2011 Elsevier B.V. All rights reserved.

Reactions of platinum(II) complexes with dioxygen: progress toward alkane functionalization

Whereas stoichiometric activation of C-H bonds by complexes of transition metals is becoming increasingly common, selective functionalization of alkanes remains a formidable challenge in organometallic chemistry. The recent advances in catalytic alkane functionalization by transition-metal complexes are summarized in Chapter I.

The studies of the displacement of pentafluoropyridine in [(tmeda)Pt(CH_3)(NC_5F_5)][BAr^f_4] (1) with γ- tetrafluoropicoline, a very poor nucleophile, are reported in Chapter II. The ligand substitution occurs by a dissociative interchange mechanism. This result implies that dissociative loss of pentafluoropyridine is the rate-limiting step in the C-H activation reactions of 1.

Oxidation of dimethylplatinum(II) complexes (N-N)Pt(CH_3)_2 (N-N = tmeda(1), α-diimines) by dioxygen is described in Chapter III. Mechanistic studies suggest a two-step mechanism. First, a hydroperoxoplatinum(IV) complex is formed in a reaction between (N-N)Pt(CH_3)_2 and dioxygen. Next, the hydroperoxy complex reacts with a second equivalent of (N-N)Pt(CH_3)_2 to afford the final product, (N-N)Pt(OH)(OCH_3)(CH_3)_2. The hydroperoxy intermediate, (tmeda)Pt(OOH)(OCH_3)(CH_3)_2 (2), was isolated and characterized. The reactivity of 2 with several dime thylplatinum(II) complexes is reported.

The studies described in Chapter IV are directed toward the development of a platinum(II)-catalyzed oxidative alkane dehydrogenation. Stoichiometric conversion of alkanes (cyclohexane, ethane) to olefins (cyclohexene, ethylene) is achieved by C-H activation with [(N-N)Pt(CH_3)(CF_3CH_2OH)]BF_4 (1, N-N is N,N'-bis(3,5-di-t- butylphenyl)-1,4-diazabutadiene) which results in the formation of olefin hydride complexes. The first step in the C-H activation reaction is formation of a platinum(II) alkyl which undergoes β-hydrogen elimination to afford the olefin hydride complex. The cationic ethylplatinum(II) intermediate can be generated in situ by treating diethylplatinum(II) compounds with acids. Treatment of (phen)PtEt_2 with [H(OEt_2)_2]Bar^f_4 at low temperatures resulted in the formation of a mixture of [(phen)PtEt(OEt_2)]Bar^f_4 (8) and [(phen)Pt(C_2H_4)H] Bar^f_4 (7). The cationic olefin complexes are unreactive toward dioxygen or hydrogen peroxide. Since the success of the overall catalytic cycle depends on our ability to oxidize the olefin hydride complexes, a series of neutral olefin complexes of platinum(II) with monoanionic ligands (derivatives of pyrrole-2-carboxyaldehyde N-aryl imines) was prepared. Unfortunately, these are also stable to oxidation.

Influência do chá verde sobre a reatividade vascular em mulheres obesas

O Chá Verde, derivado das folhas da planta Camellia sinensis, rico em flavonóides, cuja maior concentração é de Epigalocatequina gallato (EGCG), possui efeito termogênico, além de promover a oxidação da gordura corporal, tendo potencial interesse para o tratamento da obesidade, que atinge prevalência alarmante em diversos países no mundo. O objetivo deste estudo foi a avaliação de parâmetros bioquímicos e investigação da função endotelial em mulheres com Índice de Massa Corporal (IMC) entre 30kg/m2 e 40kg/m2, na faixa de 30 e 50 anos, antes e após 03 meses de consumo de chá verde (600mL/dia, equivalente a 114,42mg de EGCG). Todas as 60 pacientes voluntárias foram submetidas à análise das medidas antropométricas (Peso, Altura, Índice de Massa Corporal, Circunferência de Cintura, Circunferência de Quadril, Relação Cintura-Quadril, Pressão Arterial, à análise da bioquímica de rotina (Glicemia e Insulina de jejum, Triglicerídeos, Colesterol Total, HDL-Colesterol, LDL-Colesterol, Teste Oral de Tolerância à Glicose, Hemograma Completo, Proteína C-Reativa), à análise da bioquímica específica para estresse oxidativo e inflamação (Interleucinas 1 e 6, Fator de Necrose Tumoral Alfa, LDL-Oxidado, VCAM Vascular Cell Adhesion Molecule, ICAM Intercellular Adhesion Molecule, e E-Selectina) e à Pletismografia de Oclusão Venosa (variação de fluxo médio máximo durante a Hiperemia Reativa/Fluxo Basal 1 (VQ Hiper) e fluxo após administração de 0,4mg de Nitroglicerina Sublingual/Fluxo Basal 2 (VQ Nitro)). Após os 3 meses (3M) de tratamento houve redução no peso corporal (86,35[83,00-94,25] vs 3M = 86,00[81,50-92,00] Kg, P < 0,05); no IMC (34,02[32,05-35,62] vs 3M = 33,13[32,28-35,05] kg/m2, P < 0,05); na circunferência de cintura (99[93-107] vs 3M = 98[91-105]cm, P < 0,001); na circunferência de quadril (115[110-119] vs 3M = 114[110-117] cm, P < 0,001); na relação cintura-quadril (0,89[0,84-0,93] vs 3M = 0,88[0,83-0,93], P < 0,001); e, na pressão arterial diastólica (75[73-82] vs 3M = 69[67-72] mmHg, P < 0,001); e, melhora significativa no fluxo sanguíneo da VQ Hiper (4,57[3,54-5,01] vs 3M = 5,83[4,46-6,56], P < 0,001); e da VQ Nitro (1,26[1,13-1,38] vs 3M = 1,41[1,25-1,50], P < 0,001). Com o uso do chá verde, 600mL/dia, contendo 114,42mg de EGCG, durante 3 meses observamos a redução de 3% no IMC e a redução da circunferência de cintura e de circunferência de quadril em 1cm; a não modificação do padrão bioquímico, incluindo os marcadores de inflamação e de estresse oxidativo; e, o aumento das vasodilatações endotélio-dependente e endotélio-independente, visualizadas por Pletismografia de Oclusão Venosa Não-Invasiva.

Avaliação do efeito do chá verde sobre a pressão arterial, função endotelial, perfil metabólico, atividade inflamatória e adiposidade corporal em mulheres pré-hipertensas obesas

As doenças cardiovasculares são a principal causa de morte nos países ocidentais. Alguns estudos sugerem que o chá verde tem efeito benéfico sobre diferentes fatores de risco cardiovascular. No entanto, outros estudos não mostraram essa associação. Objetiva avaliar em mulheres pré-hipertensas obesas o efeito do consumo de chá verde sobre: a pressão arterial, a função endotelial, o perfil metabólico, a atividade inflamatória e a adiposidade corporal. Estudos clínico, randomizado, cruzado, duplo-cego e placebo-controlado. Durante 4 semanas as mulheres foram orientadas a ingerir 3 cápsulas de extrato de chá verde por dia (500mg extrato chá verde/cápsula) passando por 2 semanas de washout e posteriormente ingeriam por mais 4 semanas o placebo. As mulheres que iniciaram o estudo tomando placebo posteriormente utilizaram o chá verde. Ou seja, todas as pacientes receberam chá verde e placebo por um mesmo período. No início e final de cada tratamento foram analisadas as variáveis. Foram avaliadas 20 mulheres pré-hipertensas, obesidade grau I e II, idade entre 25 e 59 anos. O local do estudo foi o Laboratório da Disciplina de Fisiopatologia Clínica e Experimental Clinex. Universidade do Estado do Rio de Janeiro. As variáveis estudadas foram a pressão arterial, índice de hipertemia reativa (avaliada com Endo-PAT2000), proteína C reativa, interleucina-6, fator de necrose tumoral-α, molécula de adesão intercelular e molécula de adesão vascular celular, inibidor de ativador do plasminogênio, fator de crescimento endotelial vascular, E-selectina, adiponectina, colesterol total, LDL-colesterol, HDL-colesterol, triglicérides, glicemia, insulina, HOMA, índice de massa corporal, circunferência de cintura, circunferência de quadril, relação cintura quadril e percentual de gordura corporal. Como resultados, na avaliação da pressão arterial pela monitorização ambulatorial da pressão arterial, observou-se redução significativa da pressão arterial sistólica de 24 horas (pré 130,31,7 mmHg vs. pós 127,02,0 mmHg; p= 0,02), pressão arterial sistólica diurna (pré 134,01,7 mmHg vs. pós 130,72,0 mmHg; p= 0,04) e pressão arterial sistólica noturna (pré 122,21,8 mmHg vs. pós 118,42,2 mmHg; p= 0,02), após o consumo do chá verde, em comparação ao uso do placebo. Após o consumo do chá verde foi observado aumento, embora estatisticamente não significativo, no índice de hiperemia reativa (pré 1,980,10 vs. pós 2,220,14), além de redução expressiva na concentração da molécula de adesão intercelular (pré 91,88,0 ng/ml vs. pós 85,85,6 ng/ml) e do fator de crescimento endotelial vascular (pré 195,846,2 pg/ml vs. pós 158,638,7 pg/ml), porém sem significância estatística. As demais variáveis avaliadas não se modificaram de forma significativa após o consumo do chá verde, em comparação ao placebo. Foi observada forte correlação entre redução de pressão arterial sistólica e diastólica de 24hs, avaliada pela monitorização ambulatorial da pressão arterial, e o aumento do índice de hipertemia reativa (r= -0,47; r= -0,50, respectivamente). Os resultados do presente estudo sugerem que o chá verde tem efeito benéfico sobre a pressão arterial e possivelmente sobre a função endotelial.