Microstructural characterization of electron beam evaporated tungsten oxide films for gas sensing applications

Tungsten trioxide is one of the potential semiconducting materials used for sensing NH3, CO, CH4 and acetaldehyde gases. The current research aims at development, microstructural characterization and gas sensing properties of thin films of Tungsten trioxide (WO3). In this paper, we intend to present the microstructural characterization of these films as a function of post annealing heat treatment. Microstructural and elemental analysis of electron beam evaporated WO3 thin films and iron doped WO3 films (WO3:Fe) have been carried out using analytical techniques such as Transmission electron microscopy, Rutherford Backscattered Spectroscopy and XPS analysis. TEM analysis revealed that annealing at 300oC for 1 hour improves cyrstallinity of WO3 film. Both WO3 and WO3:Fe films had uniform thickness and the values corresponded to those measured during deposition. RBS results show a fairly high concentration of oxygen at the film surface as well as in the bulk for both films, which might be due to adsorption of oxygen from atmosphere or lattice oxygen vacancy inherent in WO3 structure. XPS results indicate that tungsten exists in 4d electronic state on the surface but at a depth of 10 nm, both 4d and 4f electronic states were observed. Atomic force microscopy reveals nanosize particles and porous structure of the film. This study shows e-beam evaporation technique produces nanoaparticles and porous WO3 films suitable for gas sensing applications and doping with iron decreases the porosity and particle size which can help improve the gas selectivity.

Electron beam evaporation of tungsten oxide films for gas sensors

Pure and Iron incorporated nanostructured Tungsten Oxide (WO3) thin films were investigated for gas sensing applications using noise spectroscopy. The WO3 sensor was able to detect lower concentrations (1 ppm-10 ppm) of NH3, CO, CH4 and Acetaldehyde gases at higher operating temperatures between 100oC to 250oC. The response of the WO3 sensor to NH3, CH4 and Acetaldehyde at lower temperatures (50oC-100oC) was significant when the sensor was photo-activated using blue-light emitting diode (Blue-LED). The WO3 with Fe (WO3:Fe) was found to show some response to Acetaldehyde gas only at relatively higher operating temperature (250oC) and gas concentration of 10 ppm.

Thin film deposition and characterization of pure and iron-doped electron-beam evaporated tungsten oxide for gas sensors

Pure Tungsten Oxide (WO3) and Iron-doped (10 at%) Tungsten Oxide (WO3:Fe) nanostructured thin films were prepared using a dual crucible Electron Beam Evaporation techniques. The films were deposited at room temperature in high vacuum condition on glass substrate and post-heat treated at 300 oC for 1 hour. From the study of X-ray diffraction and Raman the characteristics of the as-deposited WO3 and WO3:Fe films indicated non-crystalline nature. The surface roughness of all the films showed in the order of 2.5 nm as observed using Atomic Force Microscopy (AFM). X-Ray Photoelectron Spectroscopy (XPS) analysis revealed tungsten oxide films with stoichiometry close to WO3. The addition of Fe to WO3 produced a smaller particle size and lower porosity as observed using Transmission Electron Microscopy (TEM). A slight difference in optical band gap energies of 3.22 eV and 3.12 eV were found between the as-deposited WO3 and WO3:Fe films, respectively. However, the difference in the band gap energies of the annealed films were significantly higher having values of 3.12 eV and 2.61 eV for the WO3 and WO3:Fe films, respectively. The heat treated samples were investigated for gas sensing applications using noise spectroscopy and doping of Fe to WO3 reduced the sensitivity to certain gasses. Detailed study of the WO3 and WO3:Fe films gas sensing properties is the subject of another paper.

Paving pathways : shaping the public health workforce through tertiary education

Public health educational pathways in Australia have traditionally been the province of Universities, with the Master of Public Health (MPH) recognised as the flagship professional entry program. Public health education also occurs within the fellowship training of the Faculty of Public Health Medicine, but within Australia this remains confined to medical graduates. In recent years, however, we have seen a proliferation of undergraduate degrees as well as an increasing public health presence in the Vocational Education and Training (VET) sector. ----- Following the 2007 Australian Federal election, the new Labour government brought with it a refreshing commitment to a more inclusive and strategic style of government. An important example of this was the 2020 visioning process that identified key issues of public health concern, including an acknowledgment that it was unacceptable to allocate less than 2% of the health budget towards disease prevention. This led to the recommendation for the establishment of a national preventive health agency (Australia: the healthiest country by 2020 National Preventative Health Strategy, Prepared by the Preventative Health Taskforce 2009). ----- The focus on disease prevention places a spotlight on the workforce that will be required to deliver the new investment in health prevention, and also on the role of public health education in developing and upskilling the workforce. It is therefore timely to reflect on trends, challenges and opportunities from a tertiary sector perspective. Is it more desirable to focus education efforts on selected lead issues such as the “obesity epidemic”, climate change, Indigenous health and so on, or on the underlying theory and skills that build a flexible workforce capable of responding to a range of health challenges? Or should we aspire to both? ----- This paper presents some of the key discussion points from 2008 – 2009 of the Public Health Educational Pathways workshops and working group of the Australian Network of Public Health Institutions. We highlight some of the competing tensions in public health tertiary education, their impact on public health training programs, and the educational pathways that are needed to grow, shape and prepare the public health workforce for future challenges.

Corporate governance in China : the role of the state and ideology in shaping reforms

Examines the political and ideological influences on China's economic reforms since the early 1980s. Discusses the influence of the Chinese Communist Party and Confucianism on economic progress and assesses the effect of reforms. Outlines the requirement for new corporate governance laws to meet the needs of expanding private businesses and considers China's use and adaptation of some Western models of corporate governance. Comments on whether these fit easily with China's business culture. Criticises the shortcomings of China's corporate laws. Looks in particular at the telecommunications industry and at the Company Law 2006.

Electron beam evaporation of tungsten oxide films for gas sensors

Pure and Iron incorporated nanostructured Tungsten Oxide (WO3) thin films were investigated for gas sensing applications using noise spectroscopy. The WO3 sensor was able to detect lower concentrations (1 ppm-10 ppm) of NH3, CO, CH4 and Acetaldehyde gases at operating temperatures between 100 degrees celcius to 250 degrees celcius. The iron doped Tungsten Oxide sensor (WO3:Fe) showed some response to Acetaldehyde gas at relatively higher operating temperature (250 degrees celcius) and gas concentration of 10 ppm. The sensitivity of the WO3 sensor towards NH3, CH4 and Acetaldehyde at lower operating temperatures (50 degrees celcius - 100 degrees celcius) was significant when the sensor was photo-activated using blue-light emitting diode (Blue-LED). From the results, photo-activated WO3 thin film that operates at room temperature appeared to be a promising gas sensor. The overall results indicated that the WO3 sensor exhibited reproducibility for the detection of various gases and the WO3:Fe indicated some response towards Acetaldehyde gas.

Technological Change and Nursing: A Labour Process Theory Approach to the Shaping of Nursing Work

Technology and Nursing Practice explains and critically engages with the practice implications of technology for nursing. It takes a broad view of technology, covering not only health informatics, but also 'tele-nursing' and the use of equipment in clinical practice.

Artful shaping : the ethics of fictionalising oral history

The paper documents the development of an ethical framework for my current PhD project. I am a practice-led researcher with a background in creative writing. My project invovles conducting a number of oral history interviews with individuals living in Brisbane, Queensland, Australia. I use the interviews to inform a novel set in Brisbane. In doing so, I hope to provide a lens into a cultural and historical space by creating a rich, textured and vivid narrative while still retaining some of the essential aspects of the oral history. While developing a methodology for fictionalising these oral histories, I have encountered a derserve range of ethical issues. In particular I have had to confront my role as a writer and researcher working with other people’s stories. In order to grapple with the complex ethics of such an engagment, I examine the devices and stratedgies employed by other creative practioners working in similar fields. I focus chielfy on Miguel Barnet’s Biography of a Runaway Slave (published in English in 1968) Dave Eggers’What is the what: The autobiography of Valentino Achek Deng, a novel (2005) in order to understand the complex processes of mediation invloved in the artful shaping of oral histories. The paper explores how I have confronted and resolved ethical considerations in my theoretical and creative work.

Examination of pencil beam predictions of small-field dose using dosimetry film and Monte Carlo simulations

The iPlan treatment planning sys-tem uses a pencil beam algorithm, with density cor-rections, to predict the doses delivered by very small (stereotactic) radiotherapy fields. This study tests the accuracy of dose predictions made by iPlan, for small-field treatments delivered to a planar solid wa-ter phantom and to heterogeneous human tissue using the BrainLAB m3 micro-multileaf collimator.

Telling tales, shaping stories : the creative practitioner and the artful life story

Norman K. Denzin (1989) claims that the central assumption of the biographical method—that a life can be captured and represented in a text—is open to question. This paper explores Denzin’s statement by documenting the role of creative writers in re-presenting oral histories in two case studies from Queensland, Australia. The first, The Queensland Business Leaders Hall of Fame, was a commercial research project commissioned by the State Library of Queensland (SLQ) in 2009, and involved semi-formal qualitative interviews and digital stories. The second is an on-going practice-led PhD project, The Artful Life: Oral History and Fiction, which investigates the fictionalisation of oral histories. Both projects enter into a dialogue around the re-presentation of oral and life histories, with attention given to the critical scholarship and creative practice in the process. Creative writers represent a life having particular preoccupations with techniques that more closely align with fiction than non-fiction (Hirsch and Dixon 2008). In this context, oral history resources are viewed not so much as repositories of historical facts, but as ambiguous and fluid narrative sources. The comparison of the two case studies also demonstrates that the aims of a particular project dictate the nature of the re-presentation, revealing that writing about another’s life is a complex act of artful ‘shaping’. Alistair Thomson (2007) notes the growing interdisciplinary nature of oral history scholarship since the 1980s; oral histories are used increasingly in art-based contexts to produce diverse cultural artefacts, such as digital stories and works of fiction, which are very different from traditional histories. What are the methodological implications of such projects? This paper will draw on self-reflexive practice to explore this question.

Pondering policy and parental perspectives : how parents view their role in shaping early childhood public policy

The focus of this paper is the role of Australian parents in early childhood education and care (ECEC), in particular, their role in shaping ECEC public policy. The paper reports the findings of a study investigating the different ways in which a group of parents viewed and experienced this role. Set against a policy backdrop where parents are positioned as 'consumers' and 'participants' in ECEC, the study employed a phenomenographic research approach to describe this role as viewed and experienced by parents. The study identified four logically related, qualitatively different ways of constituting this role among this group of parents, ranging from 'no role in shaping public policy' (the no role conception) to 'participating in policy decision-making, particularly where policy was likely to affect their child and family (the participating in policy decision-making conception). The study provides an insider-perspective on the role of parents in shaping policy and highlights variation in how this role is constituted by parents. The study also identifies factors perceived by parents as influencing their participation and discusses their implications for both policy and practice.

Governing depression in law students and the shaping of legal personae

Since a recent Australian study found that university law students experience higher rates of depression than medical students and legal professionals (Kelk et al. 2009), the mental health of law students has increasingly become a target of government. To date, however, there has been no attempt to analyse these practices as an activity of government in advanced liberal societies. This paper addresses this imbalance by providing an initial analytics of the government of depression in law schools. It demonstrates how students are responsibilised to manage the risks and uncertainties of legal education by constructing resilient forms of personal and professional personae. It highlights that, in order to avoid depression, students are encouraged to shape not just their minds and bodies according to psychological and biomedical discourses, but are also to govern their ethical dispositions and become virtuous persons. This paper also argues that these forms of government are tied to advanced liberal forms of rule, as they position the law student as the locus of responsibility for depression, imply that depression is caused by an individual failing, and entrench students within responsibilising and entrepreneurial forms of subjectivity.