COMMENSAL RODENT CONTROL

SUMMARY: Federal Urban Rat Control Program grants were awarded to cities in different areas of the United States. Severe problems of rat infestations have been detected in many of the cities by the Environmental Health Service. Approximately 20% of 3.8 million people in the project areas were occupying homes infested with rats. Control operations are now in effect in all cities, and the living conditions of the people have been substantially improved. An increase in interest in rodent control also is evident in countries outside of the United States. The Technical Development Laboratories of the National Communicable Disease Center are participating in the World Health Organization program of research on new rodenticides. The evaluation program involves five steps which carry a candidate toxi¬cant from laboratory phase through field testing. Acceptability and suitable concentrations of both acute and accumulative rodenticides are determined. Observations are made on the hazard of the compound to pets and to other nontarget vertebrates. Laboratory and field studies have been completed on a new, promising stabilized scilliroside glycoside which has given excellent control of the Norway rat in 16 out of 19 premises. Another new coded compound has shown a unique specificity for roof rats as compared to Norway rats. Although anticoagulant resistant rat populations have occurred in several countries in Europe, as yet no evidence has been noted of such resistance in rats in the United States.

Características da resposta à Aids de secretarias de saúde, no contexto da Política de Incentivo do Ministério da Saúde¹

OBJETIVOS: Analisar a cobertura da Política de Incentivo do Ministério da Saúde para Programas de Aids e as características das ações de prevenção, assistência, gestão e apoio às organizações da sociedade civil induzidas nos Estados e municípios. METODOLOGIA: Os Planos de Ações e Metas de 2006, das 27 Unidades Federadas e de 427 municípios incluídos na Política de Incentivo, foram analisados segundo indicadores estabelecidos para aferir a complexidade e a sustentabilidade das ações induzidas, a inclusão de populações prioritárias e a capacidade de intervenção na epidemia. Informações sobre população e casos de aids registrados foram utilizadas para mensurar a cobertura. RESULTADOS: Os municípios incluídos representaram uma cobertura de 85,2% dos casos de aids do País. Houve uma baixa proporção de secretarias estaduais (48,2%) e municipais (32,6%) de saúde que contemplaram, concomitantemente, ações de prevenção para a população geral e as de maior prevalência da doença, assim como ações para o diagnóstico do HIV, o tratamento de pessoas infectadas e a prevenção da transmissão vertical. Em relação às populações prioritárias, 51,9% dos Estados e 31,1% dos municípios propuseram ações específicas na prevenção e na assistência. Estados (44,4%) e municípios (27,9%) com Planos abrangentes estão mais concentrados no Sudeste e em cidades de grande porte, representando a maioria dos casos de aids do País. CONCLUSÃO: A Política de Incentivo do Ministério da Saúde compreende as regiões de maior ocorrência da aids no Brasil, porém, o perfil da resposta induzida encontra-se parcialmente dissociado das características epidemiológicas da doença no País.

Comparison of genetic gains per year for carcass traits among breeding programs in the Japanese Brown and the Japanese Black cattle

The breeding program for beef cattle in Japan has changed dramatically over 4 decades. Visual judging was done initially, but progeny testing in test stations began in 1968. In the 1980s, the genetic evaluation program using field records, so-called on-farm progeny testing, was first adopted in Oita, Hyogo, and Kumamoto prefectures. In this study, genetic trends for carcass traits in these 3 Wagyu populations were estimated, and genetic gains per year were compared among the 3 different beef cattle breeding programs. The field carcass records used were collected between 1988 and 2003. The traits analyzed were carcass weight, LM area, rib thickness, s.c. fat thickness, and beef marbling standard number. The average breeding values of reproducing dams born the same year were used to estimate the genetic trends for the carcass traits. For comparison of the 3 breeding programs, birth years of the dams were divided into 3 periods reflecting each program. Positive genetic trends for beef marbling standard number were clearly shown in all populations. The genetic gains per year for all carcass traits were significantly enhanced by adopting the on-farm progeny testing program. These results indicate that the on-farm progeny testing program with BLUP is a very powerful approach for genetic improvement of carcass traits in Japanese Wagyu beef cattle.

Comparison of Various Methods of Estrus Detection in Synchronized Virgin Beef Heifers

Methods of heat detection were compared in the Mid- Crest Area Cattle Evaluation Program (MACEP) heifer development program in the 1998-breeding season. A total of 189 heifers from thirteen consignors entered the program on November 10, 1997. These heifers were condition scored, hip height measured, weighed, disposition scored, booster vaccinated, and treated for parasites at the time of arrival. Determination of the heifer’s mature weight was made and a target of 65% of their mature weight at breeding was established. The ration was designed to meet this goal. The heifers were kept in a dry lot until all heifers were AI bred once. The heifers were periodically weighed and condition scored to monitor their gains and the ration was adjusted as needed. The estrus synchronization program consisted of an oral progesterone analog for 14 days; 17 days after completion of the progesterone analog treatment a single injection of prostaglandin was given and the heifers were then estrus detected. Two concurrent methods of estrus detection were utilized: 1) Ovatec â electronic breeding probe (probe), 2) HeatWatchâ estrus detection system (HW), and 3) a combination of probe and HW. Probe readings were obtained each 12 hours and the heifers were continuously monitored for estrus activity using the HW system. The probe was used as the primary estrus detection method and the HW system was used as a back-up system. Those heifers that did not demonstrate any estrus signs prior to 96 hours post prostaglandin treatment were mass inseminated at 96 hours. Post AI breeding, 151 of the heifers were placed on pasture and ran with clean-up bulls for 60 days. The remaining heifers left the program after the AI breeding was completed. Pregnancy to the AI breeding was determined by ultrasound on June 29, 1998. Results from using both probe and HW were 60% pregnant by AI, probe alone was 32% pregnant by AI, and HW alone was 27% pregnant by AI. The result of mass insemination was 20% pregnant by AI.

Desarrollo de un sistema de reconocimiento facial

El objetivo principal alrededor del cual se desenvuelve este proyecto es el desarrollo de un sistema de reconocimiento facial. Entre sus objetivos específicos se encuentran: realizar una primera aproximación sobre las técnicas de reconocimiento facial existentes en la actualidad, elegir una aplicación donde pueda ser útil el reconocimiento facial, diseñar y desarrollar un programa en MATLAB que lleve a cabo la función de reconocimiento facial, y evaluar el funcionamiento del sistema desarrollado. Este documento se encuentra dividido en cuatro partes: INTRODUCCIÓN, MARCO TEÓRICO, IMPLEMENTACIÓN, y RESULTADOS, CONCLUSIONES Y LÍNEAS FUTURAS. En la primera parte, se hace una introducción relativa a la actualidad del reconocimiento facial y se comenta brevemente sobre las técnicas existentes para desarrollar un sistema biométrico de este tipo. En ella se justifican también aquellas técnicas que acabaron formando parte de la implementación. En la segunda parte, el marco teórico, se explica la estructura general que tiene un sistema de reconocimiento biométrico, así como sus modos de funcionamiento, y las tasas de error utilizadas para evaluar y comparar su rendimiento. Así mismo, se lleva a cabo una descripción más profunda sobre los conceptos y métodos utilizados para efectuar la detección y reconocimiento facial en la tercera parte del proyecto. La tercera parte abarca una descripción detallada de la solución propuesta. En ella se explica el diseño, características y aplicación de la implementación; que trata de un programa elaborado en MATLAB con interfaz gráfica, y que utiliza cuatro sistemas de reconocimiento facial, basados cada uno en diferentes técnicas: Análisis por componentes principales, análisis lineal discriminante, wavelets de Gabor, y emparejamiento de grafos elásticos. El programa ofrece además la capacidad de crear y editar una propia base de datos con etiquetas, dándole aplicación directa sobre el tema que se trata. Se proponen además una serie de características con el objetivo de ampliar y mejorar las funcionalidades del programa diseñado. Dentro de dichas características destaca la propuesta de un modo de verificación híbrido aplicable a cualquier rama de la biometría y un programa de evaluación capaz de medir, graficar, y comparar las configuraciones de cada uno de los sistemas de reconocimiento implementados. Otra característica destacable es la herramienta programada para la creación de grafos personalizados y generación de modelos, aplicable a reconocimiento de objetos en general. En la cuarta y última parte, se presentan al principio los resultados obtenidos. En ellos se contemplan y analizan las comparaciones entre las distintas configuraciones de los sistemas de reconocimiento implementados para diferentes bases de datos (una de ellas formada con imágenes con condiciones de adquisición no controladas). También se miden las tasas de error del modo de verificación híbrido propuesto. Finalmente, se extraen conclusiones, y se proponen líneas futuras de investigación. ABSTRACT The main goal of this project is to develop a facial recognition system. To meet this end, it was necessary to accomplish a series of specific objectives, which were: researching on the existing face recognition technics nowadays, choosing an application where face recognition might be useful, design and develop a face recognition system using MATLAB, and measure the performance of the implemented system. This document is divided into four parts: INTRODUCTION, THEORTICAL FRAMEWORK, IMPLEMENTATION, and RESULTS, CONCLUSSIONS AND FUTURE RESEARCH STUDIES. In the first part, an introduction is made in relation to facial recognition nowadays, and the techniques used to develop a biometric system of this kind. Furthermore, the techniques chosen to be part of the implementation are justified. In the second part, the general structure and the two basic modes of a biometric system are explained. The error rates used to evaluate and compare the performance of a biometric system are explained as well. Moreover, a description of the concepts and methods used to detect and recognize faces in the third part is made. The design, characteristics, and applications of the systems put into practice are explained in the third part. The implementation consists in developing a program with graphical user interface made in MATLAB. This program uses four face recognition systems, each of them based on a different technique: Principal Component Analysis (PCA), Fisher’s Linear Discriminant (FLD), Gabor wavelets, and Elastic Graph Matching (EGM). In addition, with this implementation it is possible to create and edit one´s tagged database, giving it a direct application. Also, a group of characteristics are proposed to enhance the functionalities of the program designed. Among these characteristics, three of them should be emphasized in this summary: A proposal of an hybrid verification mode of a biometric system; and an evaluation program capable of measuring, plotting curves, and comparing different configurations of each implemented recognition system; and a tool programmed to create personalized graphs and models (tagged graph associated to an image of a person), which can be used generally in object recognition. In the fourth and last part of the project, the results of the comparisons between different configurations of the systems implemented are shown for three databases (One of them created with pictures taken under non-controlled environments). The error rates of the proposed hybrid verification mode are measured as well. Finally, conclusions are extracted and future research studies are proposed.

EPA RREL's mobile Volume Reduction Unit.

Mode of access: Internet.

Biological treatment of wood preserving site groundwater by BioTrol, Inc. : applications analysis report.

Mode of access: Internet.

Biogenesis soil, washing technology.

[cat;jmn]

Ultrox International ultraviolet radiation/oxidation technology : applications analysis report.

Mode of access: Internet.

Low temperature thermal treatment (LT³®) technology /

Mode of access: Internet.

American combustion pyretron destruction system : applications analysis report.

Mode of access: Internet.

Membrane treatment of wood preserving site groundwater by SBP Technologies, Inc.

Mode of access: Internet.

Characteristics and financial circumstances of AFDC recipients.

Description based on: FY 1987; title from cover.

Managing the waste stream : background information for planning source separation programs : final report /

"Printed: July 1989."