Properties of singular vectors using convective available potential energy as final time norm

We study the feasibility of using the singular vector technique to create initial condition perturbations for short-range ensemble prediction systems (SREPS) focussing on predictability of severe local storms and in particular deep convection. For this a new final time semi-norm based on the convective available potential energy (CAPE) is introduced. We compare singular vectors using the CAPE-norm with SVs using the more common total energy (TE) norm for a 2-week summer period in 2007, which includes a case of mesoscale extreme rainfall in the south west of Finland. The CAPE singular vectors perturb the CAPE field by increasing the specific humidity and temperature of the parcel and increase the lapse rate above the parcel in the lower troposphere consistent with physical considerations. The CAPE-SVs are situated in the lower troposphere. This in contrast to TE-SVs with short optimization times which predominantly remain in the high troposphere. By examining the time evolution of the CAPE singular values we observe that the convective event in the south west of Finland is clearly associated with high CAPE singular values.

Surface chemistry of alanine on Cu{111}: Adsorption geometry and temperature dependence

Adsorption of l-alanine on the Cu{111} single crystal surface was investigated as a model system for interactions between small chiral modifier molecules and close-packed metal surfaces. Synchrotron-based X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy are used to determine the chemical state, bond coordination and out-of-plane orientation of the molecule on the surface. Alanine adsorbs in its anionic form at room temperature, whilst at low temperature the overlayer consists of anionic and zwitterionic molecules. NEXAFS spectra exhibit a strong angular dependence of the π ⁎ resonance associated with the carboxylate group, which allows determining the tilt angle of this group with respect to the surface plane (48° ± 2°) at room temperature. Low-energy electron diffraction (LEED) shows a p(2√13x2√13)R13° superstructure with only one domain, which breaks the mirror symmetry of the substrate and, thus, induces global chirality to the surface. Temperature-programmed XPS (TP-XPS) and temperature-programmed desorption (TPD) experiments indicate that the zwitterionic form converts into the anionic species (alaninate) at 293 K. The latter desorbs/decomposes between 435 K and 445 K.

On the validity of single-parcel energetics to assess the importance of internal energy and compressibility effects in stratified fluids

It is often assumed on the basis of single-parcel energetics that compressible effects and conversions with internal energy are negligible whenever typical displacements of fluid parcels are small relative to the scale height of the fluid (defined as the ratio of the squared speed of sound over gravitational acceleration). This paper shows that the above approach is flawed, however, and that a correct assessment of compressible effects and internal energy conversions requires considering the energetics of at least two parcels, or more generally, of mass conserving parcel re-arrangements. As a consequence, it is shown that it is the adiabatic lapse rate and its derivative with respect to pressure, rather than the scale height, which controls the relative importance of compressible effects and internal energy conversions when considering the global energy budget of a stratied fluid. Only when mass conservation is properly accounted for is it possible to explain why available internal energy can account for up to 40 percent of the total available potential energy in the oceans. This is considerably larger than the prediction of single-parcel energetics, according to which this number should be no more than about 2 percent.

Comments on 'Current GCMs' Unrealistic Negative Feedback in the Arctic'

In contrast to prior studies showing a positive lapse-rate feedback associated with the Arctic inversion, Boé et al. reported that strong present-day Arctic temperature inversions are associated with stronger negative longwave feedbacks and thus reduced Arctic amplification in the model ensemble from phase 3 of the Coupled Model Intercomparison Project (CMIP3). A permutation test reveals that the relation between longwave feedbacks and inversion strength is an artifact of statistical self-correlation and that shortwave feedbacks have a stronger correlation with intermodel spread. The present comment concludes that the conventional understanding of a positive lapse-rate feedback associated with the Arctic inversion is consistent with the CMIP3 model ensemble.

Influence of temperature during grain filling on gluten viscoelastic properties and gluten protein composition

BACKGROUND The aim of this study was to investigate the effects of low to moderate temperatures on gluten functionality and gluten protein composition. Four spring wheat cultivars were grown in climate chambers with three temperature regimes (day/night temperatures of 13/10, 18/15 and 23/20 °C) during grain filling. RESULTS The temperature strongly influenced grain weight and protein content. Gluten quality measured by maximum resistance to extension (Rmax) was highest in three cultivars grown at 13 °C. Rmax was positively correlated with the proportion of sodium dodecyl sulfate-unextractable polymeric proteins (%UPP). The proportions of ω-gliadins and D-type low-molecular-weight glutenin subunits (LMW-GS) increased and the proportions of α- and γ-gliadins and B-type LMW-GS decreased with higher temperature, while the proportion of high-molecular-weight glutenin subunits (HMW-GS) was constant between temperatures. The cultivar Berserk had strong and constant Rmax between the different temperatures. CONCLUSION Constant low temperature, even as low as 13 °C, had no negative effects on gluten quality. The observed variation in Rmax related to temperature could be explained more by %UPP than by changes in the proportions of HMW-GS or other gluten proteins. The four cultivars responded differently to temperature, as gluten from Berserk was stronger and more stable over a wide range of temperature

A critical evaluation of the ability of the Spinning Enhanced Visible and Infrared Imager (SEVIRI) thermal infrared red-green-blue rendering to identify dust events: theoretical analysis

Using a combination of idealized radiative transfer simulations and a case study from the first field campaign of the Saharan Mineral Dust Experiment (SAMUM) in southern Morocco, this paper provides a systematic assessment of the limitations of the widely used Spinning Enhanced Visible and Infrared Imager (SEVIRI) red-green-blue (RGB) thermal infrared dust product. Both analyses indicate that the ability of the product to identify dust, via its characteristic pink coloring, is strongly dependent on the column water vapor, the lower tropospheric lapse rate, and dust altitude. In particular, when column water vapor exceeds ∼20–25 mm, dust presence, even for visible optical depths of the order 0.8, is effectively masked. Variability in dust optical properties also has a marked impact on the imagery, primarily as a result of variability in dust composition. There is a moderate sensitivity to the satellite viewing geometry, particularly in moist conditions. The underlying surface can act to confound the signal seen through variations in spectral emissivity, which are predominantly manifested in the 8.7μm SEVIRI channel. In addition, if a temperature inversion is present, typical of early morning conditions over the Sahara and Sahel, an increased dust loading can actually reduce the pink coloring of the RGB image compared to pristine conditions. Attempts to match specific SEVIRI observations to simulations using SAMUM measurements are challenging because of high uncertainties in surface skin temperature and emissivity. Recommendations concerning the use and interpretation of the SEVIRI RGB imagery are provided on the basis of these findings.

Effect of solvent hydration and temperature in the deacidification process of sunflower oil using ethanol

This work presents liquid-liquid experimental data for systems composed of sunflower seed oil, ethanol and water from 10 to 60 degrees C. The influence of process variables (temperature (T) and water concentration in the solvent (W)) on both the solvent content present in the raffinate (S(RP)) and extract (S(EP)) phases and the partition of free fatty acids (k(2)) was evaluated using the response surface methodology, where flash calculations were performed for each trial using the UNIQUAC equation. Water content in the solvent was the most important factor on the responses of S(EP) and k(2). Additionally, statistical analysis showed that the S(RP) was predominantly affected by temperature factor for low water content in the solvent. (c) 2009 Elsevier Ltd. All rights reserved.

Efeitos de variáveis abióticas na composição química de Gelidium Crinale (Gelidiaceae, Rhodophyta) em cultivo unialgal

Os efeitos individuais e interativos dos parâmetros ambientais físicos e químicos, como temperatura, intensidade luminosa, salinidade e concentração de fósforo inorgânico dissolvido na água do mar, na produção de proteínas, carboidratos, acúmulo de fósforo tecidual e taxa de absorção do fósforo inorgânico disponível no meio de cultura em Gelidium crinale (Turner) Lamouroux, foram investigados durante um período de sete dias de cultivo laboratorial, em condições controladas. A ação dos parâmetros abióticos foi analisada de três maneiras diferentes. A primeira avaliação integrou a ação de temperatura, intensidade luminosa e fósforo inorgânico dissolvido, mantendo-se fixa a salinidade em 25 ups, onde se constatou que em todos os componentes químicos algais ocorreram interações de terceira ordem. O incremento de 2,28 a 2,67 % nos teores de proteínas foram obtidos à temperatura de 25 °C e 12 μmol m-2 s-1 de intensidade luminosa, diminuindo com a elevação da intensidade luminosa para 40 μmol m-2 s-1. Para carboidratos, ocorreram interações significativas entre os três parâmetros, com um aumento de 6,85 % sendo registrado a 25 °C de temperatura, 24 μmol m-2 s-1 de intensidade luminosa e 10,0 μM de fósforo inorgânico. O aumento máximo na taxa de fósforo tecidual (0,56 %) ocorreu em talos cultivados nas menores temperatura e intensidade luminosa e na maior concentração de fósforo inorgânico dissolvido. Com relação à intensidade luminosa, foi observada uma correlação negativa entre proteínas e carboidratos. A segunda avaliação estabeleceu a ação independente e sinérgica de temperatura, salinidade e fósforo inorgânico disponível no meio de cultivo, fixando-se a intensidade luminosa em 24 μmol m-2s-1. A maior produção de proteínas ocorreu em cultivos onde a temperatura foi de 25 °C, com uma concentração de 5,0 e 10,0 μM de fósforo inorgânico dissolvido e salinidade entre 15 e 20 ups, cujos valores médios do incremento variaram entre 2,62 a 2,83 % peso seco de alga, resultando em uma interação de terceira ordem altamente significativa. Para carboidratos a elevação de 6,85 % em sua concentração está associada à maior temperatura (25 °C), maior salinidade (25 ups) e maior quantidade de fósforo inorgânico disponível no meio de cultivo (10,0 μM). Contudo, não foi observada uma interação de terceira ordem através da análise estatística. Para esta biomolécula observaram-se interações de segunda ordem altamente significativa (P < 0,005) entre temperatura e diferentes concentrações de fósforo inorgânico e entre temperatura e salinidade (P < 0,000). O acúmulo de fósforo nos talos da alga foi menor durante os cultivos em que a salinidade foi de 25 ups,nas temperaturas de 20 e 25 °C e concentração de fósforo disponível de 2,5 μM, com percentuais entre 0,08 a 0,11 % em peso de cinzas. O maior incremento ocorreu na menor temperatura, associada à baixa salinidade e alta concentração de fósforo inorgânico no meio. O coeficiente de correlação de Pearson revelou correlações positivas, altamente significativas (P < 0,001) entre teor de proteína, temperatura e disponibilidade de fósforo inorgânico no meio de cultivo. Para carboidratos, as correlações foram positivas com os três parâmetros abióticos. Para fósforo tecidual somente com o fósforo inorgânico disponível no cultivo foi que ocorreu uma relação positiva; com os outros dois parâmetros esta correlação foi negativa. Entre os componentes químicos encontrados nas algas, proteínas e carboidratos apresentaram uma relação positiva, porém fósforo tecidual apresentou uma correlação negativa com ambos, embora com proteínas esta relação não tenha sido significativa. A terceira avaliação estudou a ação individual e o sinergismo entre os parâmetros ambientais, temperatura, intensidade luminosa e salinidade, a uma concentração fixa de fósforo inorgânico disponível no meio de cultivo (10,0 μM), sobre a composição química, bem como na taxa de absorção de fósforo inorgânico disponível. Observou-se a ocorrência de interações de terceira ordem em todos as variáveis estudadas. O teor de proteínas apresentou um aumento de 3,72 % durante o período de cultivo, passando de 20,63 % antes do cultivo, para 24,35 % após o término do experimento, principalmente nas condições de 25 °C de temperatura, 12 μmol m-2s-1 de intensidade luminosa e 15 ups de salinidade. Para carboidratos, nas condições de baixa intensidade luminosa (12 μmol m-2s- 1), a uma temperatura de 20 °C e salinidades de 10 e 15 ups, foram registrados valores inferiores à amostra controle, caracterizando um consumo desta biomolécula por parte das algas. Nestas mesmas condições ambientais, foram registrados os maiores teores de fósforo tecidual, variando entre 0,86 a 1,09 % do peso das cinzas. As maiores taxas de absorção do fósforo do meio ocorreram na salinidade de 25 ups e 25 °C de temperatura, diminuindo da intensidade luminosa de 12 μmol m-2s-1 para 40 μmol m-2s-1. As maiores concentrações de fósforo inorgânico residual na água do meio de cultivo ocorreram nas salinidades de 10 e 15 ups, em todas as intensidade luminosas e temperaturas estudadas. Através do coeficiente de correlação de Pearson, observou-se que os teores de proteínas apresentaram uma forte correlação negativa com a intensidade luminosa e positiva com a temperatura e salinidade, embora com esta última não tenha sido significativa. Para carboidratos, as correlações com os parâmetros abióticos foram todas positivas. Correlações negativa e positiva, não significativas, foram observadas entre esta biomolécula e o teor de proteínas e a taxa de absorção de fósforo disponível no meio, respectivamente. Por outro lado, com fósforo tecidual, ocorreu uma correlação negativa, altamente significativa. Este estudo mostra o estado fisiológico de Gelidium crinale e contribui para o estabelecimento das melhores condições de cultivo para produção de proteína, carboidrato e fósforo tecidual e indicação do uso racional de nutrientes, fornecendo informações para a otimização de processos de maricultura, tanto em termos de cultivo bem sucedido de algas, quanto de redução no impacto sobre o ambiente.

Polioencefalomalacia experimental em bovinos induzida por toxicose por enxofre

O presente trabalho teve como objetivos avaliar os sinais clínicos, as concentrações do sulfeto de hidrogênio ruminal e as alterações anatomopatológicas associadas à intoxicação experimental por enxofre em bovinos. Foram utilizados dez bezerros mestiços leiteiros, sendo que quatro bovinos ingeriram ração sem sulfato de sódio (G1) e seis consumiram ração com sulfato de sódio (G2). Exames clínicos (temperatura retal, frequência cardíaca e respiratória e motricidade ruminal) e laboratoriais (hemograma, fibrinogênio, proteína plasmática, pH do fluido ruminal, concentração do sulfeto de hidrogênio ruminal, líquido cerebrospinal e histopatológico) foram realizados. A temperatura retal, frequência cardíaca, hemograma, fibrinogênio, proteína plasmática, pH do fluido ruminal e os valores do líquido cerebrospinal estavam dentro dos valores de referência para a espécie. Taquipnéia, hipomotricidade ruminal e elevados valores de sulfeto de hidrogênio ruminal foram observados nos bezerros do grupo G2. Um bezerro do grupo G2 apresentou sinais neurológicos e lesões histopatológicas de PEM. Dois animais de cada grupo foram eutanasiados. Lesões microscópicas foram observadas nos bezerros do G2. Histologicamente as alterações observadas foram necrose neuronal cortical e lesões hemorrágicas nos núcleos basais, tálamo, mesencéfalo, ponte e bulbo. O protocolo experimental constituído por uma dieta rica em carboidrato de alta fermentação, baixa quantidade de fibra efetiva e altos níveis de enxofre (0,52%) ocasionou alterações clinicas e histológicas e elevadas concentrações de sulfeto de hidrogênio ruminal compatíveis com quadro de intoxicação por enxofre.

An overview of the HIBISCUS campaign

The EU HIBISCUS project consisted of a series of field campaigns during the intense convective summers in 2001, 2003 and 2004 in the State of São Paulo in Brazil. Its objective was to investigate the impact of deep convection on the Tropical Tropopause Layer (TTL) and the lower stratosphere by providing a new set of observational data on meteorology, tracers of horizontal and vertical transport, water vapour, clouds, and chemistry in the tropical Upper Troposphere/Lower Stratosphere (UT/LS). This was achieved using short duration research balloons to study local phenomena associated with convection over land, and long-duration balloons circumnavigating the globe to study the contrast between land and oceans.Analyses of observations of short-lived tracers, ozone and ice particles show strong episodic local updraughts of cold air across the lapse rate tropopause up to 18 or 19 km (420-440 K) in the lower stratosphere by overshooting towers. The long duration balloon and satellite measurements reveal a contrast between the composition of the lower stratosphere over land and oceanic areas, suggesting significant global impact of such events. The overshoots are shown to be well captured by non-hydrostatic meso-scale Cloud Resolving Models indicating vertical velocities of 50-60 m s(-1) at the top of the Neutral Buoyancy Level (NBL) at around 14 km, but, in contrast, are poorly represented by global Chemistry-Transport Models (CTM) forced by Numerical Weather Forecast Models (NWP) underestimating the overshooting process. Finally, the data collected by the HIBISCUS balloons have allowed a thorough evaluation of temperature NWP analyses and reanalyses, as well as satellite ozone, nitrogen oxide, water vapour and bromine oxide measurements in the tropics.

Modeling hydrothermal system: deriving observables and hydrothermal instability in volcanic and non-volcanic setting

Hydrothermal fluids are a fundamental resource for understanding and monitoring volcanic and non-volcanic systems. This thesis is focused on the study of hydrothermal system through numerical modeling with the geothermal simulator TOUGH2. Several simulations are presented, and geophysical and geochemical observables, arising from fluids circulation, are analyzed in detail throughout the thesis. In a volcanic setting, fluids feeding fumaroles and hot spring may play a key role in the hazard evaluation. The evolution of the fluids circulation is caused by a strong interaction between magmatic and hydrothermal systems. A simultaneous analysis of different geophysical and geochemical observables is a sound approach for interpreting monitored data and to infer a consistent conceptual model. Analyzed observables are ground displacement, gravity changes, electrical conductivity, amount, composition and temperature of the emitted gases at surface, and extent of degassing area. Results highlight the different temporal response of the considered observables, as well as the different radial pattern of variation. However, magnitude, temporal response and radial pattern of these signals depend not only on the evolution of fluid circulation, but a main role is played by the considered rock properties. Numerical simulations highlight differences that arise from the assumption of different permeabilities, for both homogeneous and heterogeneous systems. Rock properties affect hydrothermal fluid circulation, controlling both the range of variation and the temporal evolution of the observable signals. Low temperature fumaroles and low discharge rate may be affected by atmospheric conditions. Detailed parametric simulations were performed, aimed to understand the effects of system properties, such as permeability and gas reservoir overpressure, on diffuse degassing when air temperature and barometric pressure changes are applied to the ground surface. Hydrothermal circulation, however, is not only a characteristic of volcanic system. Hot fluids may be involved in several mankind problems, such as studies on geothermal engineering, nuclear waste propagation in porous medium, and Geological Carbon Sequestration (GCS). The current concept for large-scale GCS is the direct injection of supercritical carbon dioxide into deep geological formations which typically contain brine. Upward displacement of such brine from deep reservoirs driven by pressure increases resulting from carbon dioxide injection may occur through abandoned wells, permeable faults or permeable channels. Brine intrusion into aquifers may degrade groundwater resources. Numerical results show that pressure rise drives dense water up to the conduits, and does not necessarily result in continuous flow. Rather, overpressure leads to new hydrostatic equilibrium if fluids are initially density stratified. If warm and salty fluid does not cool passing through the conduit, an oscillatory solution is then possible. Parameter studies delineate steady-state (static) and oscillatory solutions.

Precipitation isoscape of high reliefs: interpolation scheme designed and tested for monthly resolved precipitation oxygen isotope records of an Alpine domain

Stable oxygen isotope composition of atmospheric precipitation (δ18Op) was scrutinized from 39 stations distributed over Switzerland and its border zone. Monthly amount-weighted δ18Op values averaged over the 1995–2000 period showed the expected strong linear altitude dependence (−0.15 to −0.22‰ per 100 m) only during the summer season (May–September). Steeper gradients (~ −0.56 to −0.60‰ per 100 m) were observed for winter months over a low elevation belt, while hardly any altitudinal difference was seen for high elevation stations. This dichotomous pattern could be explained by the characteristically shallower vertical atmospheric mixing height during winter season and provides empirical evidence for recently simulated effects of stratified atmospheric flow on orographic precipitation isotopic ratios. This helps explain "anomalous" deflected altitudinal water isotope profiles reported from many other high relief regions. Grids and isotope distribution maps of the monthly δ18Op have been calculated over the study region for 1995–1996. The adopted interpolation method took into account both the variable mixing heights and the seasonal difference in the isotopic lapse rate and combined them with residual kriging. The presented data set allows a point estimation of δ18Op with monthly resolution. According to the test calculations executed on subsets, this biannual data set can be extended back to 1992 with maintained fidelity and, with a reduced station subset, even back to 1983 at the expense of faded reliability of the derived δ18Op estimates, mainly in the eastern part of Switzerland. Before 1983, reliable results can only be expected for the Swiss Plateau since important stations representing eastern and south-western Switzerland were not yet in operation.

Composition of sulfides from the Sierra Leone Fracture Zone (Central Atlantic Ocean)

An analysis of data on the location of hydrothermal fields, seismicity, and satellite altimetry evidences that in mid-ocean ridges with low spreading rate hydrothermal fields tend to be grouped in areas with generally low seismic activity and at intersections of discontinuities and rift zones. Based on this assumption, the Sierra Leone Fracture Zone was studied in 2000 during Cruise 22 of R/V Akademik Nikolaj Strakhov. A study of gabbrodolerite and dolerite showed that sulfide ore minerals in them were formed both by hydrothermal and magmatic processes. An analysis of melt inclusions demonstrated that magmatic complexes formed from a high-temperature (1210-1255°C) low-potassium melt of the N-MORB type. Investigations of fluid inclusions revealed that gabbro and dolerite formed under influence of an active hydrothermal system at temperature 205-226°C. Thus, the Sierra Leone Fracture Zone is considered to be perspective for a discovery of a new hydrothermal field.