Prediction of stress-strain behaviors in steels using an integrated constitutive, FEM and ANN model

Austenitic steels with a carbon content of 0.0037 to 0.79 wt% C are torsion tested and modeled using a physically based constitutive model and an Integrated Phenomenological and Artificial neural Network (IPANN) model. The prediction of both the constitutive and IPANN models on steel 0.017 wt% C is then evaluated using a finite element (FEM) code ABAQUS with different reduction in the thickness after rolling through one roll stand. It is found that during the rolling process, the prediction accuracy of the reaction force from FEM simulation for both constitutive and IPANN models depends on the strain achieved (average reduction in thickness). By integrating FEM into IPANN model and introducing the product of strain and stress as an input of the ANN model, the accuracy of this integrated FEM and IPANN model is higher than either the constitutive or IPANN model.

A semianalytical Sachs model for the flow stress of a magnesium alloy

A semianalytical Sachs-type equation for the flow stress of magnesium-base alloys is developed using the Schmid law, power law hardening, and a sigmoidal increase in the twinning volume fraction with strain. Average Schmid factors were estimated from electron backscattered diffraction (EBSD) data. With these, the equation provides a reasonable description of the flow curves obtained in compression and tension for samples of Mg-3Al-1Zn cut in different orientations from rolled plate. The model illustrates the general importance of basal slip and twinning in magnesium alloys. The significance of prismatic slip in room temperature tension testing is also highlighted. This is supported with EBSD slip line trace analysis and rationalized in terms of a possible sensitivity of the critical resolved shear stress for prismatic (cross) slip to the stress on the basal plane.

Yoga as a preventative and treatment for depression, anxiety and stress

With the dual aims of better understanding the contribution of Yoga to positive mental health and exploring links between yogic philosophy and psychological theory, researchers at Deakin University in Melbourne, Australia, conducted a study on Yoga as a preventative and treatment for symptoms of mental illness. The Yoga classes were designed as a six-week program incorporating breathing techniques (prânâyâma), exercises for strength, vitality, and flexibility (âsanas), guided relaxation (yoga-nidrâ), and meditation. The aim of this process was to enhance self-awareness, encourage the perspective that emotional states are somewhat transient, and encourage a self-accepting and calm attitude through concentrating on synchronizing gentle movements and breathing. By developing calmness, selfacceptance, a balanced perspective, and enhanced concentration it was hypothesized that participants in the six-week Yoga program would strengthen their resistance to emotional distress. Psychometric testing was carried out to assess symptoms of stress, anxiety, and depression across three groups: regular Yoga practitioners, beginners entering the program, and people who did not practice Yoga, and these tests were re-administered after six weeks. In addition, a strong sense of intrinsic spiritual experience has been cited as a possible buffer to stress, anxiety, and depression and has been associated with decreased frequency of medical symptoms. All participants were therefore also assessed on their sense of intrinsic spirituality, but not on religious beliefs. At the end of six weeks, the Yoga beginners group showed lower average levels of symptoms of depression, anxiety, and stress than at commencement, but levels were stable for regular Yoga practitioners and people who did not practice Yoga. In addition, beginners showed growth in their self-reported level of intrinsic spiritual experience.

Impact of training on changes in perceived stress and cytokine production

Data on training of competitive athletes and the inflammatory response, and, more specifically, the utility of psychological inventories to monitor this response in regards to overreaching is limited. The aim of the present study was to investigate the association of the Perceived Stress Scale (PSS) and inflammatory markers in elite rowers. Eight rowers (males n = 4; females n = 4) were monitored over an 8-week training period, comprising 12 sessions each week and training an average 3.11 h·d-1. Training volume was periodized weekly while intensity was maintained throughout the study. Perceived stress was measured weekly pretraining, and capillary blood samples (500 μL) were taken post-training. Significant associations between perceived stress and cytokines interleukin-6 (p < .05) and tumor necrosis factor alpha (p < .05) were observed. While further investigation of the role of cytokines in the overtraining process is required, these data provide preliminary support for an association between perceived stress and the inflammatory responses to training.

On the stress function-based OWA determination method with optimization criteria

The ordered weighted averaging (OWA) determination method with stress function was proposed by Yager, and it makes the OWA operator elements scatter in the shape of the stress function. In this paper, we extend the OWA determination with the stress function method using an optimization model. The proposed method transforms the OWA optimal solution elements into the interpolation points of the stress function. The proposed method extends the basic form of the stress function method with both scale and vertical shift transformations.We also explore a number of properties of this optimization-based stress function method. The OWA operator optimal solution elements can distribute as the shape of the given stress function in a parameterized way, in which case, the solution always possesses the arithmetic average operator as a special case.

Triploid and diploid rainbow trout do not differ in their stress response to transportation

We examined the neuroendocrine and cellular stress responses of diploid and triploid rainbow trout Oncorhynchus mykiss to transportation. Juvenile diploid and triploid rainbow trout (28 and 26 g/fish average weight, respectively) were stocked at 100 g/L in replicate 70-L tanks and subjected to transportation for an 8-h period. Subsequent levels of plasma cortisol and glucose and of cellular hepatic glutathione (GSH) and heat shock protein 70 (Hsp70) were similar between ploidy groups, indicating that triploid fish respond to transportation in much the same way as diploid fish. A stationary treatment was also included that involved confinement of experimental fish in similar tanks without transport to determine to what extent high-density containment contributed to the stress response in the absence of the noise and vibration of transport. Unexpectedly, fish in the stationary treatment had significantly higher plasma cortisol and glucose levels than the transported fish; however, this might be attributable to a confounding effect of hyperoxia, as oxygen levels fluctuated between 150% and 460% saturation in the stationary tank, while those in the transported tank remained within 100–200% saturation. We suggest that when long stops are necessary while transporting fish, water agitators be used to preclude the additional stress of excessive gas saturation. This may be particularly important for triploid fish, which had lower hepatic GSH levels than diploid fish as well as a low level of mortality in the stationary treatment, unlike the diploid fish.

Multiscale modelling of stress and strain partitioning in high strength dual phase steels

Multiscale modelling of stress and strain partitioning in DP steel was carried out using both realistic microstructure-based RVE models as well as stochastic microstructures generated by Monte Carlo method. The stochastic microstructure models were shown to resemble that of realistic microstructures, enabling research on the specific aspects of the microstructure that could be difficult to control and study during experimental work. One such feature of the realistic microstructures studied in this work was the grain size and microstructure morphology. The microstructures were generated with varying average grain sizes while all other parameters, such as boundary conditions, material properties and volume fractions of martensite and ferrite were kept constant. It is found that the effect of grain size is much more pronounced during the initial localisation of the plastic deformation at and around the interface of the phases. In addition, the decrease in ductility and increase in strength of the DP steels are directly related to the refinement of grain sizes of each phase and the stress-strain partitioning in between them.

Post-traumatic stress disorder and quality of life in sexually abused Australian children

The study used publicly available data on post-traumatic stress disorder in a sample of the Australian population with a history of sexual abuse to demonstrate how this evidence can inform economic analyses. The 2007 Australian Mental Health Survey revealed that 8.3% of 993 adolescents experienced childhood sexual abuse, of which 40.2% were diagnosed with post-traumatic stress disorder. Post-traumatic stress disorder diagnosis corresponded to a significant loss of quality of life. Survival analysis was used to estimate the lifetime persistence of post-traumatic stress disorder symptoms. The average time between post-traumatic stress disorder onset and remission was 11.4 years. Results suggest that successful treatment of post-traumatic stress disorder will save 2.05 quality adjusted life years per child or adolescent with post-traumatic stress disorder.

The hot working flow stress and microstructure in magnesium AZ31

The evolution of flow stress and microstructure for wrought magnesium alloy AZ31 was characterised using torsion and compression testing. Temperatures ranging between 300°C and 450°C and strain rates between 0.001s^-1 and 1s^-1, were employed. Constitutive equations were developed for the flow stress at a strain of 1.0 for torsion, and 0.6 for compression. The flow stress was found to be strongly dependent on deformation mode at low strains. This can be explained in terms of the influence of the deformation accommodating processes of prismatic slip and dynamic recrystallisation (DRX). At higher strains, when the change in flow stress with strain is lower, the flow stress was relatively insensitive to deformation mode. Optical microscopy carried out on torsion samples quenched after twisting to strains between 0.2 and 2 revealed dynamically recrystallised (DRX) grains situated on pre-existing grain boundaries. The average grain size was reduced from 22.5μm down to 7.3 μm after a strain of 2, with the initial grain size being halved after a strain of 0.5.

Tax reform under fiscal stress: a CGE analysis of the Brazilian tax reform

In spite of a general agreement over the distortion imposed by the current Brazilian tax system, attempts to reform it during the last decade have faced several restrictions to its implementation. Two of these restrictions were particular binding: a) fiscal adjustment restriction (public sector debt cannot increase), b) fiscal federalist restriction (revenues from individual states and municipalities cannot decrease). This paper focuses on a specific reform that overcomes in principle the fiscal federalist restriction. Using Auerbach and Kotlikoff (1987) model calibrated for the Brazilian economy, I analyze the short and long run macroeconomic effects of this reform subject to the fiscal adjustment restriction. Finally, I look at the redistributive effects of this reform among generations as a way to infer about public opinion’s reaction to the reform. The reform consists basically of replacing indirect taxes on corporate revenues, which I show to be equivalent to a symmetric tax on labor and capital income, by a new federal VAT. The reform presented positive macroeconomic effects both in the short and long run. Despite a substantial increase in the average VAT rate in the first years after the reform, a majority of cohorts experienced an increase in their lifetime welfare, being potentially in favour of the reform.

Comparative degradation of ZnO- and SnO(2)-based polycrystalline non-ohmic devices by current pulse stress

The degradation behaviour of SnO(2)-based varistors (SCNCr) due to current pulses (8/20 mu s) is reported here for the first time in comparison with the ZnO-based commercial varistors (ZnO). Puncturing and/or cracking failures were observed in ZnO-based varistors possessing inferior thermo-mechanical properties in comparison with that found in a SCNCr system free of failures. Both systems presented electric degradation related to the increase in the leakage current and decrease in the electric breakdown field, non-linear coefficient and average value of the potential barrier height. However, it was found that a more severe degradation occurred in the ZnO-based varistors concerning their non-ohmic behaviour, while in the SCNCr system, a strong non-ohmic behaviour remained after the degradation. These results indicate that the degradation in the metal oxide varistors is controlled by a defect diffusion process whose rate depends on the mobility, the concentration of meta-stable defects and the amount of electrically active interfaces. The improved behaviour of the SCNCr system is then inferred to be associated with the higher amount of electrically active interfaces (85%) and to a higher energy necessary to activate the diffusion of the specific defects.

Changes in leaf proline and fruit production induced by potassium stress in eggplant

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Serum melatonin level and oxidative stress in sickle cell anemia

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The influence of residual stress and crystallite size on the magnetic properties of electrodepo sited nanocrystalline Pd-Co alloys

Nanocrystalline Pd-Co alloys were obtained by electrodeposition from an ammoniacal chloride bath. The influence of the crystallite size and the residual stress on the magnetic properties of the alloys was investigated. The residual stress increased as the applied current density was increased. It was associated to the high nucleation rate during electrodeposition and correlated to the lattice strain, estimated from the XRD patterns. Also from the XRD patterns the average crystallite size and the lattice constant were determined by Scherrer's and Rietveld's methods, respectively. Both parameters were directly influenced by the applied current density. Magnetic properties such as coercivity, remanence, saturation magnetization and squareness showed strong dependence on the residual stress and crystallite size. Coercivity higher than 1 kOe was achieved when a high current density was applied. High coercivity was attributed to the presence of residual stress and to the small crystallite size of deposits. (C) 2007 Elsevier B.V. All rights reserved.

Treatment of urinary stress incontinence by intravaginal electrical stimulation and pelvic floor physiotherapy

Treatment of urinary stress incontinence (USI) by intravaginal electrical stimulation (IES) and pelvic floor physiotherapy represents an alternative to other therapies. The purpose of this work was to evaluate the effectiveness of this treatment inpatients with urinary incontinence. From January 1998 to May 2000, 30 women (mean age 54 years) were studied. All patients had USI and 70% urge incontinence; average follow-up was 7 months. Selection criteria were based on clinical history, objective evaluation of perineal musculature by perineometry, and urodynamics. The treatment protocol consisted of three sessions of IES per week for 14 weeks using INNOVA equipment. Physiotherapy was initiated in the fifth week of IES. A significant decrease in the number of micturitions and urgency was observed after treatment (P<0.01). The pad test showed a reduction in urinary leakage from 13.9 to 5.9 g after treatment (P<0.01). Objective evaluation of perineal muscle strength showed a significant improvement in all patients after treatment (P<0.01). A positive correlation was observed between maximum flow rate (Q(max)) and all three variables: urethral pressure profile at rest and on straining (stop test), and abdominal leak-point pressure (ALPP). A positive correlation was also observed between ALPP and the stop test. Over 100 different surgical and conservative treatments have been tried to manage USI. The majority of these procedures reveal that despite progress already made in this area, there is no ideal treatment. Satisfactory results can be achieved with this method, especially with patients who are reluctant to undergo surgery because of personal or clinical problems.