An investigation of the three-body reaction He^3(He^3, 2p)He^4

Reactions produced by the He³ bombardment of the He³ have been investigated for bombarding energies from 1 to 20 MeV using a tandem Van de Graaff accelerator. Proton spectra from the three-body reaction He³(He³, 2p)He⁴ have been measured with a counter telescope at 13 angles for 9 bombarding energies between 3 and 18 MeV. The results are compared with a model for the reaction which includes a strong p-He⁴ final-state interaction. Alpha-particle spectra have been obtained at 12 and 18 MeV for forward angles with a magnetic spectrometer. These spectra indicate a strongly forward-peaked mechanism involving the ¹S₀ p-p interaction in addition to the p-He⁴ interaction. Measurements of p-He⁴ and p-p coincidence spectra at 10 MeV confirm these features of the reaction mechanism. Deuteron spectra from the reaction of He³(He³, d)pHe³ have been measured at 18 MeV. A triton spectrum from the reaction He³(He³, t)3p at 20 MeV and 4⁰ is interpreted in terms of a sequential decay through an excited state of the alpha particle at 20.0 MeV. No effects are observed which would indicate an interaction in the residual (3p) system. Below 3 MeV the He³(He³, 2p)He⁴ reaction mechanism is observed to be changing and further measurements are suggested in view of the importance of this reaction in stellar interiors.

Total cross section measurements for ^3He(^3He, 2p)^4He at low energies

Precise measurements of the total reaction cross section for ³He(³He,2p)⁴He He have been made in the range of center-of-mass energies between 1100 keV and 80 keV. A differentially pumped gas target modified to operate with a limited quantity of the target gas was employed to minimize the uncertainties in the primary energy and energy straggle. Beam integration inside the target gas was carried out by a calorimetric device which measures the total energy spent in a heat sink rather than the total charge in a Faraday cup. Proton energy spectra have been obtained using a counter telescope consisting of a gas proportional counter and a surface barrier detector and angular distributions of these protons have been measured at seven bombarding energies. Cross section factors, S(E), have been calculated from the total cross sections and fitted to a linear function of energy over different ranges of energy. For E_cm < 500 keV

S(E_cm) = S₀ + S₁ E_cm

where S₀ = (5.0 ^+0.6_-0.4) MeV - barns and S₁ = (-1.8 ± 0.5) barns.

Aplicación de la norma internacional de contabilidad nic 36 deterioro de valor de los activos en entidades cotizadas

Idioma del TFG: castellano. Análisis de lo que implica la aplicación de la norma internacional de contabilidad y realizar una breve comparativa con la normativa española, destacar si existen diferentes, y observar y analizar como afecta y se implanta en empresas pertenecientes al IBEX 35, tanto del mismo sector como sectores distintos.

Desenvolvimento do pênis durante o período fetal humano (13 a 36 semanas pós-concepção)

Objetivo: Analisar, em fetos humanos, o crescimento da área do pênis, da túnica albugínea e das estruturas eréteis (corpos cavernosos e corpo esponjoso), bem como o aparecimento e modificações das principais estruturas que compõem estes tecidos (colágeno, músculo liso e fibra elástica) durante o período fetal (13 a 36 semanas pós-concepção), fornecendo padrões normativos de crescimento. Material e Métodos: Foram utilizados 56 fetos humanos do sexo masculino com idade gestacional compreendida entre 13 e 36 semanas pós-concepção (SPC). Foram utilizadas técnicas histoquímicas, imunohistoquímicas, e análises morfométricas, e analisados os seguintes parâmetros: área total do pênis, área do corpo cavernoso, área do corpo esponjoso e a espessura da túnica albugínea na região dorsal e ventral do corpo cavernoso. No corpo cavernoso e no corpo esponjoso, as fibras musculares, o colágeno e as fibras do sistema elástico, foram identificados e quantificados por percentagem, no programa Image J (NIH, Bethesda, EUA).Resultados: Da 13 à 36 semana pós-concepção, a área do pênis variou de 0,95mm2 a 24,25mm2. No mesmo período a área do corpo cavernoso variou de 0,28mm2 a 9,12mm2 e a área do corpo esponjoso de 0,14mm2 a 3,99mm2. No corpo cavernoso a percentagem de fibras colágenas, fibras musculares e fibras do sistema elástico variaram, respectivamente, de 19,88% a 36,60%, de 4,39 % a 29,76 % e de 1,91% a 8,92%. No corpo esponjoso a percentagem de fibras colágenas, fibras musculares e fibras do sistema elástico variaram, respectivamente de 34,65% a 45,89%, de 0,60% a 11,90% e de 3,22% a 11,93%. A espessura da túnica albugínea variou de 0,029 a 0,296 na região dorsal e de 0,014 a 0,113 na região ventral do corpo cavernoso.Conclusão: Existe correlação fortemente positiva entre o crescimento da área total, da área do corpo cavernoso e da área do corpo esponjoso, com a idade gestacional, assim como existe correlação entre o crescimento dos elementos constituintes do tecido erétil do pênis (colágeno, fibras musculares lisas e fibras elásticas) com a idade gestacional no período fetal estudado. O ritmo de crescimento do pênis é mais intenso no IIo. trimestre gestacional (13 a 24 SPC). O crescimento da espessura da túnica albugínea também foi diretamente proporcional e apresentou correlação fortemente positiva com a idade gestacional, sendo maior na região dorsal em relação à região ventral do corpo cavernoso.

Back pages of No. 36, 1982

Information for Supporters of the Charles Darwin Foundation. Membership of the Executive Council.

Stray current corrosion of copper sheathing and keel cooling pipe of a 36' trawler

The results of investigations into the cause of an accelerated corrosion of copper sheathing and keel cooling pipe of a 36' wooden trawler are reported. The corrosion is attributed to the stray electric currents originating from the electrical wiring system. The sources of stray currents and the remedial measures have been suggested.

Detection of the hepatotoxic microcystins in 36 kinds of cyanobacteria Spirulina food products in China

Gel filtration chromatography, ultra-filtration, and solid-phase extraction silica gel clean-up were evaluated for their ability to remove microcystins selectively from extracts of cyanobacteria Spirulina samples after using the reversed-phase octadecylsilyl ODS cartridge for subsequent analysis by liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS). The reversed-phase ODS cartridge/silica gel combination were effective and the optimal wash and elution conditions were: H2O (wash), 20% methanol in water (wash), and 90% methanol in water (elution) for the reversed-phase ODS cartridge, followed by 80% methanol in water elution in the silica gel cartridge. The presence of microcystins in 36 kinds of cyanobacteria Spirulina health food samples obtained from various retail outlets in China were detected by LC-MS/MS, and 34 samples (94%) contained microcystins ranging from 2 to 163 ng g(-1) (mean=1427 ng g(-1)), which were significantly lower than microcystins present in blue green alga products previously reported. MC-RR-which contains two molecules of arginine (R)-(in 94.4% samples) was the predominant microcystin, followed by MC-LR-where L is leucine-(30.6%) and MC-YR-where Y is tyrose-(27.8%). The possible potential health risks from chronic exposure to microcystins from contaminated cyanobacteria Spirulina health food should not be ignored, even if the toxin concentrations were low. The method presented herein is proposed to detect microcystins present in commercial cyanobacteria Spirulina samples.

MOCVD生长Al_(0.48)Gao_(0.52)N/Al_(0.54)Ga_(0.36)N多量子阱的结构和光学特性

采用金属有机物化学气相淀积(MOCVD)技术,在蓝宝石衬底上生长了Al_(0.48)Gao_(0.52)N/Al_(0.54)Ga_(0.36)N多量子阱(MQWs)结构.通过双晶X射线衍射(DCXRD)、原子力显微镜(AFM)和阴极荧光(CL)等测试技术,分别对样品的结构和光学特性进行了表征.在DCXRD图谱中,可以观察到明显的MQWs衍射卫星峰,通过拟和,MQWs结构中阱和垒的厚度分别为2.1和9.4 nm,Al组分分别为0.48和0.54.在AFM表面形貌图上,可以观察到清晰的台阶流,表明MQWs获得了二维生长;与此同时,MQWs结构存在一些裂缝,主要原因为AlGaNMQWs结构和下层GaN层间存在很大的应力.CL测试表明,AlGaN MQWs结构的发光波长为295 nm,处于深紫外波段,同时观察到处于蓝光、绿光波段的缺陷发光.

One-Dimensional InP-Based Photonic Crystal Quantum Cascade Laser Emitting at 5.36μm

An InP-based one-dimensional photonic crystal quantum cascade laser is realized. With photo lithography instead of electron beam lithography and using inductively coupled plasma etching, four-period air-semiconductor couples are defined as Bragg reflectors at one end of the resonator. The spectral measurement at 80K shows the quasi-continuous-wave operation with the wavelength of 5.36μm for a 22μm-wide and 2mm-long epilayer-up bonded device.