柴油、甲醇和水三组元乳化液流变特性的研究

对柴油、甲醇和水三组元乳化液的流变特性进行了研究。实验发现，乳化液在本实验的组分配比下近似为牛顿流体，而且乳化剂的种类、含量以及乳化液的组分均对乳化液的流变特性具有显著的影响。对于组分相同的乳化液，乳化液的粘度随着乳化剂含量和粘度的增加而增加；当乳化剂的含量和粘度相同时，若甲醇和水之间的相对质量分数保持不变，减少乳化液中柴油的质量分数（不少于50%），乳化液的粘度随之增加。水和甲醇的含量对乳化液粘度的影响比较复杂，还需要做深入细致的机理研究。

Switching performance of epitaxially grown normally-off 4H-SiC JFET

Static and dynamic behavior of the epitaxially grown dual gate trench 4H-SiC junction field effect transistor (JFET) is investigated. Typical on-state resistance Ron was 6-10mΩcm2 at VGS = 2.5V and the breakdown voltage between the range of 1.5-1.8kV was realized at VGS = -5V for normally-off like JFETs. It was found that the turn-on energy delivers the biggest part of the switching losses. The dependence of switching losses from gate resistor is nearly linear, suggesting that changing the gate resistor, a way similar to Si-IGBT technology, can easily control di/dt and dv/dt. Turn-on losses at 200°C are lower compared to those at 25°C, which indicates the influence of the high internal p-type gate layer resistance. Inductive switching numerical analysis suggested the strong influence of channel doping conditions on the turn-on switching performance. The fast switching normally-off JFET devices require heavily doped narrow JFET channel design. © (2009) Trans Tech Publications, Switzerland.

Crack deflection at an interface between dissimilar elastic-materials

A crack intersecting an interface between two dissimilar materials may advance by either penetrating through the interface or deflecting into the interface. The competition between deflection and penetration can be assessed by comparison of two ratios: (i) the ratio of the energy release rates for interface cracking and crack penetration; and (ii) the ratio of interface to material fracture energies. Residual stresses caused by thermal expansion misfit can influence the energy release rates of both the deflected and penetrating crack. This paper analyses the role of residual stresses. The results reveal that expansion misfit can be profoundly important in systems with planar interfaces (such as layered materials, thin film structures, etc.), but generally can be expected to be of little significance in fiber composites. This paper corrects an earlier result for the ratio of the energy release rate for the doubly deflected crack to that for the penetrating crack in the absence of residual stress.

光弹调制器在偏振方向调制中的应用

提出了一种将光弹调制器应用于偏振方向调制的方法．介绍了它的两种基本使用模式，利用琼斯矩阵对其偏振方向调制原理及其两种基本使用模式进行了分析。光弹调制器和1／4波片形成偏振方向调制器件时，光弹调制器处于两块透光轴相互垂直的1／4波片之间．且光弹调制器的振动轴分别和两块1／4波片的透光轴成±45°角，线偏振光通过此器件其偏振方向被调制。实验验证了光弹调制器组合1／4波片调制偏振方向的原理。将光弹调制器应用在偏振方向的调制中．使现有偏振方向调制技术的光谱范围扩展到了紫外波段。

CCD扫描检测光束准直度

提出一种检测光束准直度的新方法。在对波面矢高进行定义的基础上，提出CCD轴向扫描检测激光束准直度的方法。利用采样光波在会聚透镜后形成的衍射图样，测量两个相同基准衍射图样之间的距离，即可确定入射光波的波面矢高，进而确定入射光波的准直度。在给出测量原理及模拟基准衍射图样的基础上．进行了实验验证。CCD轴向扫描方法具有结构简单、加工便利、操作方便的特点，是检测光束准直度的有效方法。

On-line learning of mutually orthogonal subspaces for face recognition by image sets.

We address the problem of face recognition by matching image sets. Each set of face images is represented by a subspace (or linear manifold) and recognition is carried out by subspace-to-subspace matching. In this paper, 1) a new discriminative method that maximises orthogonality between subspaces is proposed. The method improves the discrimination power of the subspace angle based face recognition method by maximizing the angles between different classes. 2) We propose a method for on-line updating the discriminative subspaces as a mechanism for continuously improving recognition accuracy. 3) A further enhancement called locally orthogonal subspace method is presented to maximise the orthogonality between competing classes. Experiments using 700 face image sets have shown that the proposed method outperforms relevant prior art and effectively boosts its accuracy by online learning. It is shown that the method for online learning delivers the same solution as the batch computation at far lower computational cost and the locally orthogonal method exhibits improved accuracy. We also demonstrate the merit of the proposed face recognition method on portal scenarios of multiple biometric grand challenge.

Electroosmotic flow analysis of a branched U-turn nanofluidic device.

In this paper, we present the analysis of electroosmotic flow in a branched -turn nanofluidic device, which we developed for detection and sorting of single molecules. The device, where the channel depth is only 150 nm, is designed to optically detect fluorescence from a volume as small as 270 attolitres (al) with a common wide-field fluorescent setup. We use distilled water as the liquid, in which we dilute 110 nm fluorescent beads employed as tracer-particles. Quantitative imaging is used to characterize the pathlines and velocity distribution of the electroosmotic flow in the device. Due to the device's complex geometry, the electroosmotic flow cannot be solved analytically. Therefore we use numerical flow simulation to model our device. Our results show that the deviation between measured and simulated data can be explained by the measured Brownian motion of the tracer-particles, which was not incorporated in the simulation.

藏南红景天植物的生态学研究

本文通过在林周唐古地区的定位性调查和历史资料的分析，对红景天植物的资源生态学特性进行了如下几个方面的探讨和研究。 1、分析了调查区的自然概况，探讨了调查区红景天的地理分布规律及特点。 2、对调查区的植被进行分析，划分了22个群落种组，八个群落类型。并对群落种组，群落学特征进行了分析。同时，还探讨了群落的分布规律以及生态系统与环境因子的关系。 3、分析了红景天种子的生物学特性、种子的撒播、萌发和幼苗建成过程以及自然条件下的无性繁殖方式。并进一步的也进行了人工繁殖实验。 4、通过物种间关系的研究，对三种红景天的指示植物种进行了初步确定，其结果在种的排序图上得到了进一步的分析和解释。 5、对红景天不同部位化学成分的测定结果表明：不同部位化学成分的分布量不同。建议开发利用过程中，应根据利用目的针对性开发。 6、对不同海拔带的红景天生物量进行了测定分析，并对其生长过程进行了生物量的动态研究和生长分析。 7、就红景天植物资源的利用历史、利用现状和开发利用过程中存在的问题做了概括性论述。并对今后合理利用和保护等问题提出了一些建议。