Adipocyte size fluctuation, mechano-active lipid droplets and caveolae

International audience

Estudo experimental do escoamento bifásico líquido gás em golfadas com leve mudança de direção

Gas-liquid two-phase flow is very common in industrial applications, especially in the oil and gas, chemical, and nuclear industries. As operating conditions change such as the flow rates of the phases, the pipe diameter and physical properties of the fluids, different configurations called flow patterns take place. In the case of oil production, the most frequent pattern found is slug flow, in which continuous liquid plugs (liquid slugs) and gas-dominated regions (elongated bubbles) alternate. Offshore scenarios where the pipe lies onto the seabed with slight changes of direction are extremely common. With those scenarios and issues in mind, this work presents an experimental study of two-phase gas-liquid slug flows in a duct with a slight change of direction, represented by a horizontal section followed by a downward sloping pipe stretch. The experiments were carried out at NUEM (Núcleo de Escoamentos Multifásicos UTFPR). The flow initiated and developed under controlled conditions and their characteristic parameters were measured with resistive sensors installed at four pipe sections. Two high-speed cameras were also used. With the measured results, it was evaluated the influence of a slight direction change on the slug flow structures and on the transition between slug flow and stratified flow in the downward section.

DESIGN, MODELING, AND FABRICATION OF MICROROBOT LEGS

This dissertation presents work done in the design, modeling, and fabrication of magnetically actuated microrobot legs. Novel fabrication processes for manufacturing multi-material compliant mechanisms have been used to fabricate effective legged robots at both the meso and micro scales, where the meso scale refers to the transition between macro and micro scales. This work discusses the development of a novel mesoscale manufacturing process, Laser Cut Elastomer Refill (LaCER), for prototyping millimeter-scale multi-material compliant mechanisms with elastomer hinges. Additionally discussed is an extension of previous work on the development of a microscale manufacturing process for fabricating micrometer-sale multi-material compliant mechanisms with elastomer hinges, with the added contribution of a method for incorporating magnetic materials for mechanism actuation using externally applied fields. As both of the fabrication processes outlined make significant use of highly compliant elastomer hinges, a fast, accurate modeling method for these hinges was desired for mechanism characterization and design. An analytical model was developed for this purpose, making use of the pseudo rigid-body (PRB) model and extending its utility to hinges with significant stretch component, such as those fabricated from elastomer materials. This model includes 3 springs with stiffnesses relating to material stiffness and hinge geometry, with additional correction factors for aspects particular to common multi-material hinge geometry. This model has been verified against a finite element analysis model (FEA), which in turn was matched to experimental data on mesoscale hinges manufactured using LaCER. These modeling methods have additionally been verified against experimental data from microscale hinges manufactured using the Si/elastomer/magnetics MEMS process. The development of several mechanisms is also discussed: including a mesoscale LaCER-fabricated hexapedal millirobot capable of walking at 2.4 body lengths per second; prototyped mesoscale LaCER-fabricated underactuated legs with asymmetrical features for improved performance; 1 centimeter cubed LaCER-fabricated magnetically-actuated hexapods which use the best-performing underactuated leg design to locomote at up to 10.6 body lengths per second; five microfabricated magnetically actuated single-hinge mechanisms; a 14-hinge, 11-link microfabricated gripper mechanism; a microfabricated robot leg mechansim demonstrated clearing a step height of 100 micrometers; and a 4 mm x 4 mm x 5 mm, 25 mg microfabricated magnetically-actuated hexapod, demonstrated walking at up to 2.25 body lengths per second.

A distributed, compact routing protocol for the Internet

The Internet has grown in size at rapid rates since BGP records began, and continues to do so. This has raised concerns about the scalability of the current BGP routing system, as the routing state at each router in a shortest-path routing protocol will grow at a supra-linearly rate as the network grows. The concerns are that the memory capacity of routers will not be able to keep up with demands, and that the growth of the Internet will become ever more cramped as more and more of the world seeks the benefits of being connected. Compact routing schemes, where the routing state grows only sub-linearly relative to the growth of the network, could solve this problem and ensure that router memory would not be a bottleneck to Internet growth. These schemes trade away shortest-path routing for scalable memory state, by allowing some paths to have a certain amount of bounded “stretch”. The most promising such scheme is Cowen Routing, which can provide scalable, compact routing state for Internet routing, while still providing shortest-path routing to nearly all other nodes, with only slightly stretched paths to a very small subset of the network. Currently, there is no fully distributed form of Cowen Routing that would be practical for the Internet. This dissertation describes a fully distributed and compact protocol for Cowen routing, using the k-core graph decomposition. Previous compact routing work showed the k-core graph decomposition is useful for Cowen Routing on the Internet, but no distributed form existed. This dissertation gives a distributed k-core algorithm optimised to be efficient on dynamic graphs, along with with proofs of its correctness. The performance and efficiency of this distributed k-core algorithm is evaluated on large, Internet AS graphs, with excellent results. This dissertation then goes on to describe a fully distributed and compact Cowen Routing protocol. This protocol being comprised of a landmark selection process for Cowen Routing using the k-core algorithm, with mechanisms to ensure compact state at all times, including at bootstrap; a local cluster routing process, with mechanisms for policy application and control of cluster sizes, ensuring again that state can remain compact at all times; and a landmark routing process is described with a prioritisation mechanism for announcements that ensures compact state at all times.

"Mutações no gene OCT4 em células eritroleucêmicas humanas: implicações sobre o fenótipo de resistência a múltiplas drogas (MDR)”

O fator de transcrição OCT4 é um importante marcador de células tronco e tem sido relacionado com o conceito de células tronco tumorais (CTTs). Recentemente, ele tem sido também relacionado ao fenótipo de resistência a múltiplas drogas (MDR). O objetivo deste trabalho foi testar se o OCT4 está ligado ao fenótipo MDR em células eritroleucêmicas derivadas da linhagem LMC-K562. Para isso, foi realizada a análise de expressão de genes associados à superfamília de transportadores ABC (ATP Binding Cassette) e, também, de fatores de transcrição relacionados a células tronco. Os primeiros resultados apontaram uma relação direta entre OCT4 e transportadores ABC na linhagem MDR derivada de K562 (Lucena). O sequenciamento de promotores ABC não revelou qualquer mutação que pudesse explicar a expressão diferenciada do OCT4 na linhagem MDR. Posteriormente, o sequenciamento da região contendo o domínio homeobox do gene OCT4 de ambas as linhagens celulares evidenciou, pela primeira vez, que este fator de transcrição é alvo de mutações que podem estar relacionados com o fenótipo MDR. As mutações encontradas implicam substituições de vários aminoácidos em ambas as linhagens celulares. K562 teve sete substituições (três exclusivas), enquanto Lucena teve 13 (nove exclusivas). Além disso, um busca in silico por motivos de fosforilação dentro da sequência de aminoácidos comparada, revelou que o OCT4 humano normal possui sete motivos potenciais de fosforilação. Entretanto, K562 perdeu um motivo e Lucena dois deles. Moléculas com diferentes padrões de fosforilação podem ter sua função modificada. Estes resultados indicam o OCT4 com uma alvo potencial para o tratamento do câncer, especialmente aqueles resistentes à quimioterapia.

Molecular mechanisms involved in cell response to mechanical forces

New devices were designed to generate a localized mechanical vibration of flexible gels where human umbilical vein endothelial cells (HUVECs) were cultured. The stimulation setups were able to apply relatively large strains (30%~50%) at high temporal frequencies (140~207 Hz) in a localized subcellular region. One of the advantages of this technique was to be less invasive to the innate cellular functions because there was no direct contact between the stimulating probe and the cell body. A mechanical vibration induced by the device in the substrate gel where cells were seeded could mainly cause global calcium responses of the cells. This global response was initiated by the influx of calcium across the stretch-activated channels in the plasma membrane. The subsequent production of inositol triphosphate (IP3) via phospholipase C (PLC) activation triggered the calcium release from the endoplasmic reticulum (ER) to cause a global intracellular calcium fluctuation over the whole cell body. This global calcium response was also shown to depend on actomyosin contractility and F-actin integrity, probably controlling the membrane stretch-activated channels. The localized nature of the stimulation is one of the most important features of these new designs as it allowed the observation of the calcium signaling propagation by ER calcium release. The next step was to focus on the calcium influx, more specifically the TRPM7 channels. As TRPM7 expression may modulate cell adhesion, an adhesion assay was developed and tested on HUVECs seeded on gel substrates with different treatments: normal treatment on gels showed highest attachment rate, followed by the partially treated gels (only 5% of usual fibronectin amount) and untreated gels, with the lowest attachment rate. The trend of the attachment rates correlated to the magnitude of the calcium signaling observed after mechanical stimulation. TRPM7 expression inhibition by siRNA caused an increased attachment rate when compared to both control and non-targeting siRNA-treated cells, but resulted in an actual weaker response in terms of calcium signaling. It suggests that TRPM7 channels are indeed important for the calcium signaling in response to mechanical stimulation. A complementary study was also conducted consisting in the mechanical stimulation of a dissected Drosophila embryo. Although ionomycin treatment showed calcium influx in the tissue, the mechanical stimulation delivered as a vertical vibration did not elicited calcium signaling in response. One possible reason is the dissection procedure causing desensitization of the tissue due to the scrapings and manipulations to open the embryo.

Análise da eficiência de indicadores da restauração ecológica em Mata Ripária no Cerrado, Planaltina - DF

Dissertação (mestrado)—Universidade de Brasília, Departamento de Engenharia Florestal, Programa de Pós-Graduação em Ciências Florestasi, 2015.

Impact of Hypoxia on the Community Structure of Benthic Macroinvertebrates of Lagos Lagoon, Nigeria

Study of the Lagos lagoon was conducted for two years to investigate the impact of hypoxia on the benthic macroinvertebrates. Water and benthic samples were collected monthly along the study stretch and analysed in a standard laboratory. Temporal variation in water physico-chemistry was largely controlled by rainfall pattern while the spatial variation was influenced by proximity to the Harbour as well as the pollution sources and types. A total of 3,159 individuals comprising three phyla, five classes, nineteen families and twenty three species were recorded. Iddo I, Iddo II, Ogudu and Agboyi study stations recorded very low individuals, but relatively high number of polychaetes. Benthic macro- invertebrate community was dominated by the molluscs. Margalef’s index of species richness ranged from 0.79 to 2.57 while Shannon-Wiener index ranged from 0.40 to 2.19. Species evenness index ranged from 0.29 to 0.80. There was generally low biodiversity indicating the stressed nature of the study area.

Tratamento térmico do titânio e suas consequências sobre as propriedades físico-químicas e de biocompatibilidade

The titanium and titanium alloys are widely used as biomaterial in biomedical device and so research have been developed aiming to improve and/or better to understand interaction biomaterial/biological environment. The process for manufacturing of this titanium implants usually involves a series of thermal and mechanical processes which have consequence on the final product. The heat treatments are usually used to obtain different properties for each application. In order to understand the influence of these treatments on the biological response of the surface, it was done, in this work, different heat treatments in titanium and analyzed their influence on the morphology, adhesion and proliferation of the pre-osteoblastic cells (MC3T3-E1). For such heat-treated titanium disks were characterized by optical microscopy, contact angle, surface energy, roughness, microhardness, X-ray diffraction and scanning through the techniques (BSE, EDS and EBSD). For the analysis of biological response were tested by MTT proliferation, adhesion by crystal violet and β1 integrin expression by flow cytometry. It was found that the presence of a microstructure very orderly, defined by a chemical attack, cells tend to stretch in the same direction of orientation of the material microstructure. When this order does not happen, the most important factor influencing cell proliferation is the residual stress, indicated by the hardness of the material. This way the disks with the highest level state of residual stress also showed increased cell proliferation

Effects of roller massager on muscle performance, morphology, and oxygenation after exercise-induced muscle damage

This study determined roller massager (RM) effectiveness on ankle plantar flexors’ recovery after exercise-induced muscle damage (EIMD) stimulus. Two experiments were conducted. The first experiment (n=10) examined functional [i.e., ankle plantar flexion maximal voluntary isometric contraction (MVIC) and submaximal (30% of MVIC) sustained force; ankle dorsiflexion maximal range of motion and resistance to stretch; and pain pressure threshold] and morphological [medial gastrocnemius (MG) cross sectional area, thickness, fascicle length, and fascicle angle] variables, before and immediately, 1h, 24h, 48h, and 72 after EIMD. In the second experiment (n=10), changes in MG deoxyhemoglobin concentration kinetics (velocity and amplitude) during a submaximal sustained force test were observed before and 48h after EIMD. Participants performed both experiments twice, with and without (NRM) the application of a RM (6 × 45 seconds with 20 seconds rest between sets). RM intervention did not alter plantar flexors’ strength and flexibility impairment after EIMD, as well the MG morphology and oxygenation kinetics (p>0.05). On the other hand, a strong tendency for an acute (within 1 hour) change of ipsilateral (post-effects: RM=+19%, NRM=-5%, p=0.032) and contralateral (p=0.095) MG pain pressure threshold was observed. In conclusion, the present results suggest that a roller massager has no effect on muscular performance, morphology, and oxygenation recovery after EIMD, except for muscle pain pressure threshold (i.e., a soreness). Thus, RM may have potential application in recovery for people with increased muscle soreness, if performed immediately before a physical task.

Segunda Circular

Dissertação para obtenção do grau de Mestre em Arquitectura com especialização em Urbanismo, apresentada na Universidade de Lisboa - Faculdade de Arquitetura.

Estudo do recuo das arribas a leste de Quarteira (Algarve-Portugal) por restituiçäo fotogramétrica

Dissertação de mest. em Estudos Marinhos e Costeiros Ramo Gestão Costeira, Unidade de Ciências e Tecnologias dos Recursos Aquáticos, Univ. do Algarve, 1996

Preenchimento sedimentar de duas zonas de dinâmica diferenciada no sapal de Castro Marim

Dissertação de mest. em Estudos Marinhos e Costeiros Ramo Gestão Costeira, Faculdade de Ciências do Mar e do Ambiente, Univ. do Algarve, 2002

Effects de l'application d'acide gibbérellique (GA3) sur la qualité de raisins et de vins produits en climat tropical au Nord-Est du Brésil.

The honeydew moth Cryptoblabes gnidiella is the main problem for the wineries in the Northeast of the Brazil, because it attacks the bunch and reduces the quality of the grapes and the wines. In order to stretch out the bunch to facilitate the penetration of the insecticides, it was used gibberellic acid. Six treatments with different concentrations and different dates of application, and the control were compared. The bunches are compact, characteristic of the "Syrah" grapes in the region. The grape berries were analysed at harvest and wines were made by microvinifications. The grape berries showed different qualitative characteristics, as berry weight, number of berries. °Brix, total acidity and heterogeneity of the maturation. The microvinifications were carried out with 50 kg of grapeberries into glass bottles of 20 L at 22°C, for the alcoholic and malolactic fermentations, then stabilized and bottled. The wines were tasted by a panel of ten people and compared on smell and taste plans. The tasting results showed that the control treatment was the best graded wine. The application of gibberellic acid allowed to control the honeydew moth attack, but it caused a heterogeneity on grape maturation, with a lower quality of the grapes and wines compared to the control.

Efeito de diferentes tempos de alongamento na flexibilidade da musculatura posterior da coxa

Projeto de Graduação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Licenciada em Fisioterapia