Influência da temperatura de calcinação do fosfogesso no desempenho de cimentos supersulfatados

The supersulfated cement (CSS) basically consist of up to 90% blast furnace slag, 10-20% of a source of calcium sulfate and a small amount of alkali activator, covered by European standard EN 15743/2010. Because of this SSC are considered "green cement" low environmental impact. The source of calcium sulfate used in the preparation of CSS can be obtained from natural sources, such as gypsum or from alternative sources (industrial products), such as phosphogypsum. The phosphogypsum is a by-product of the fertilizer industry, used in the production of phosphoric acid. In this process the phosphate rock is treated with sulfuric acid to give as the major product phosphoric acid (H3PO4), gypsum and a small amount of hydrofluoric acid. The chemical composition of gypsum is basically calcium sulfate dihydrate (CaSO4.2H2O), similar to gypsum, because it can be used in this type of cement. To become anhydrous, the calcination of gypsum is necessary. The availability of the source of calcium sulfate to react with the slag is dependent on its solubility that is directly related to its calcination temperature. The solubility of the anhydrous gypsum decreases with increasing calcination temperature. This study investigated the influence of temperature of calcination of phosphogypsum on the performance of CSS. Samples were prepared with 10 and 20% of phosphogypsum calcinated at 350 to 650 ° C using KOH as an alkaline activator at three different concentrations (0.2, 0.5 and 0.8%). The results showed that all mortars presented the minimum values required by EN 15743/2010 for 7 and 28 days of hydration. In general CSS containing 10% phosphogypsum showed slightly better compressive strength results using a lower calcination temperature (350 °C) and curing all ages. The CSS containing 20% of calcined gypsum at 650 °C exhibit satisfactory compressive strenght at 28 days of hydration, but at later ages (56 to 90 days) it strongly reduced. This indicates that the calcination temperature of phosphogypsum has a strong influence on the performance of the CSS.

Resíduos da indústria agro-alimentar como possíveis fontes de ácido ferúlico

A indústria agro-alimentar produz anualmente uma grande quantidade de subprodutos, ainda tratados como desperdício. A indústria cervejeira, em particular, está associada à produção de vários resíduos, entre os quais o bagaço de malte, também designado bagaço de cerveja ou dreche. Sendo produzida numa razão de 20 kg por cada 100 litros de cerveja, só na Ilha da Madeira a produção de dreche ultrapassa as 2000 toneladas/ano. O presente trabalho foi realizado com o intuito de estudar a utilização da dreche como material de partida para a extracção de ácido ferúlico, um ácido hidroxicinâmico com elevada bioactividade e aplicações. A caracterização físico-química da dreche permitiu determinar um teor de humidade de aproximadamente 70% e um teor de cinzas de cerca de 3,6%. A distribuição granulométrica da dreche seca, revelou que cerca de 70% das partículas que a constituem têm dimensão entre 1 e 0,25 mm. A extracção com acetona produziu um extracto contendo 5 compostos de natureza fenólica, determinados por LC-MS. A hidrólise alcalina – uma das técnicas que permitem a extracção de compostos como o ácido ferúlico a partir de matrizes lenhocelulósicas – foi estudada em amostras de dreche submetidas a tratamento prévio. O pré-tratamento com ácido diluído demonstrou ser eficiente na extracção do ácido ferúlico a partir da dreche. A extracção em autoclave mostrou ser eficiente na extracção do ácido ferúlico [0,28% (m/m)] e uma simplificação do procedimento posterior à reacção de hidrólise alcalina fez aumentar o rendimento de extracção em cerca de 84%, comparativamente ao procedimento habitual. As condições óptimas de hidrólise alcalina em tubos autopressurizados aconteceram a 120 ºC, por 1,5 horas, num rácio de 20 mL/g e NaOH (1,5%). O processo de purificação do ácido ferúlico extraído por adsorção numa resina sintética resultou em percentagens de adsorção de 90,83% e de dessorção em torno dos 68,70%.

Material para construção civil a partir de lodo de estação de tratamento de água, lama de polimento de mármore e resíduo de produção de cal

The rapid population growth is the great motivator for the development of the construction industry and the increased demand for drinking water, resulting in a gradual increase in the generation of solid waste. Thus, this work was carried out in order to recycle industrial and municipal wastes incorporating them into materials for civil construction. The composite produced from water treatment sludge and marble polishing mud, applying lime production waste as a binder, was evaluated for its mechanical performance and its morphological structure. The raw materials were characterized for their chemical composition, mineralogy, morphology, particle size and also the moisture content. With the featured materials nine compositions have been developed varying the content of the water treatment sludge between 25 to 50%, marble polishing mud between 35 to 50% and the lime production waste between 10 to 30%. The composites were subjected to mechanical strength tests, water absorption, chemical and mineralogical composition and morphology. The developed materials presented, on the 3rd day of hydration, maximum strength value of 4.65 MPa, the 7th day 6.36 MPa, on the 14th day 6.74 MPa, the 28th day 5.98 MPa, on the 60th day 8.52 MPa at 90th day 11.75 MPa and 180th day 12.06 MPa. The water absorption values after 28 days of hydration ranged from 16.27% to 26.32% and after 90 days, from 13.57% to 23.56%.

Valorisation of fish-cannery by-products targeting the recovery of ω3 lipids

Over the past years, ω3 fatty acids, namely EPA and DHA, have been recognized as presenting multiple health benefits. Several studies consider fish oil as the most important source of EPA and DHA. Nowadays, canned fish industry plays a very important role in Portuguese economy. However, expansion of this business brought some environmental concerns due to the high amount of by-products generated. Nevertheless, this problem can be substantially reduced by the recovery of some of the by-product components, diminishing its contamination load and simultaneously obtaining value-added products. This study was born from the growing interest in obtaining new sources of lipids rich in ω3 fatty acids, combined with environmental concerns related to the production of wastes from the fish canning industries, rich in these compounds. It thus intends to evaluate lipid extraction methods in liquid by-products from the fish canning industry, aiming to obtain fractions rich in ω3 fatty acids. Additionally, in a biorefining concept, the protein content of the remaining aqueous fractions was also quantified.

Avaliação de Impacto Ambiental, Valorização do Efluente e dos Resíduos Sólidos da Indústria Corticeira

A preocupação com o meio ambiente, nomeadamente na descarga de águas residuais, consumo de água excessivo e produção de resíduos industriais, está cada vez mais presente no quotidiano. Devido a estas problemáticas, efetuou-se a avaliação de impacte ambiental (AIA) do processo produtivo das rolhas de cortiça naturais, tratamento das águas de cozedura da cortiça (estudo da possível reutilização do efluente tratado) e valorização de subprodutos – resíduo sólido (raspa de cortiça), sendo estes os objetivos propostos para a realização da presente dissertação. Na AIA, efetuada no decorrer das fases da Análise do Ciclo de Vida (ACV), foram selecionadas 8 categorias de impacte – aquecimento global, acidificação, dessecação, toxicidade e ecotoxicidade, eutrofização, consumo de recursos não renováveis e oxidação foto-química. A água de cozedura caracterizou-se por uma elevada carga poluente, apresentando elevada concentração de cor, Carência Química de Oxigénio (CQO), taninos e lenhina e Sólidos Suspensos Totais (SST). O processo de tratamento proposto consistiu num pré-tratamento por ultrafiltração (UF), com membranas de 30.000 e 20.000 MWCO, seguido de adsorção por carvão ativado (comercial e produzido a partir de raspa de cortiça). No tratamento por UF, utilizando uma membrana de 30.000 MWCO, foram obtidas percentagens de remoção para a primeira amostra de água de cozedura de 74,8 % para a cor, 33,1 % para a CQO e para a segunda amostra de 85,2 % para a cor e 41,8 % para a CQO. Posteriormente, apenas para a segunda amostra de água de cozedura e com uma membrana de 20.000 MWCO, as percentagens de remoção obtidas foram superiores, de 93% para a cor, 68,9 % para a CQO, 88,4 % para taninos e lenhina e 43,0 % para azoto total. No tratamento por adsorção com carvão ativado estudou-se o tempo de equilíbrio do carvão ativado comercial e do carvão ativado produzido a partir de aparas de cortiça, seguindo-se o estudo das isotérmicas de adsorção, no qual foram analisados os parâmetros da cor e CQO para cada solução. Os ajustes dos modelos teóricos aos pontos experimentais demonstraram que ambos os modelos (Langmuir e Freundlich) poderiam ser considerados, uma vez que apresentaram ajustes idênticos. Relativamente ao tratamento de adsorção em contínuo do permeado, obtido por UF com membrana de 20.000 MWCO, constatou-se que ambos os carvões ativados (comercial e produzido) não ficaram saturados, tendo em consideração os tempos de saturação estimados pela capacidade máxima de adsorção (determinada para a isotérmica de Langmuir) e as representações gráficas dos valores experimentais obtidos para cada ensaio. No ensaio de adsorção com carvão ativado comercial verificou-se que o efluente tratado poderia ser descarregado no meio hídrico ou reutilizado no processo industrial (considerando os parâmetros analisados), uma vez que até aos 11 minutos de ensaio a concentração da solução à saída foi de 111,50 mg/L O2, para a CQO, e incolor, numa diluição de 1:20. Em relação à adsorção em contínuo com carvão ativado produzido verificou-se no ensaio 4 que o efluente resultante apresentou uma concentração de CQO de 134,5 mg/L O2 e cor não visível, numa diluição de 1:20, ao fim de 1h22 min de ensaio. Assim, concluiu-se que os valores obtidos são inferiores aos valores limite de emissão (VLE) presentes no Decreto-Lei n.º 236/98 de 1 de Agosto. O carvão ativado produzido apresentou elevada área superficial específica, com 870 m2/g, comparativamente ao carvão comercial que foi de 661 m2/g. O processo de extração da suberina a partir de raspa de cortiça isenta de extraíveis, efetuado através da metanólise alcalina, apresentou percentagens de extração superiores aos restantes métodos. No processo efetuado em scale-up, por hidrólise alcalina, obteve-se uma extração de 3,76 % de suberina. A aplicação da suberina no couro demonstrou que esta cera apresenta enormes potencialidades, uma vez que a sua aplicação confere ao couro um aspeto sedoso, com mais brilho e um efeito de “pull-up”.

Mapeamento projetivo, associação de palavras e escala hedônica como instrumentos de avaliação da percepção de produtos de pescado por crianças da rede pública de ensino

Brazil is a country that is characterized by its low consumption of fish. With consumption records of 10.6 kg/ inhabitant/ year, it is lower than the recommended by the UN, that is 12 kg/ inhabitant/ year. The regular consumption of fish provides health gain for people and their introduction into the school feeding is an important strategy for the insertion of this food consumption habits in a population. In this context, the objective of this study was to understand the perception of fish with children from the public school system through the technical Projective Mapping (MP) and Association of Words (AP); and evaluate the acceptability of fish derivative in school meals. In the first instance with the intention to better understand the perception of children from different ages about the fish-based products, Projective Mapping techniques were applied through the use of food figures and word association. A total of 149 children from three public schools from Pato Branco, Paraná State, Brazil, took part in this study. Three groups of children aged 5-6, 7-8 and 9-10 years old were interviewed individually by six monitors experienced in applied sensory methods. Ten figures with healthy foods drawings (sushi, salad, fruit, fish, chicken), and less healthy foods (pizza, pudding, cake, hamburger, fries) were distributed to the children, who were asked to paste the figures in A3 sheet, so that the products they considered similar stayed near each other, and the ones considered very different stayed apart. After this, the children described the images and the image groups (Ultra Flash Profile). The results revealed that the MP technique was easily operated and understood by all the children and the use of images made its implementation easier. The results analysis also revealed different perceptions came from children from different ages and hedonic perceptions regarding the fish-based products had a greater weight in the percentage from older children. AP technique proved to be an important tool to understand the perception of fish by children, and strengthened the results previously obtained by the MP. In a second step it was evaluated the acceptance of fish burger (tilapia) in school meals. For this task, the school cooks were trained to prepare the hamburgers. For the evaluation of acceptance, the hedonic scale was used with 5 facial ratings (1 = disliked very much to 5 = liked a lot). Students from both genders, between 5 to 10 years old (n = 142) proved the burgers at lunchtime, representing the protein portion of the meal. The tilapia derivative products shown to be foods with important nutritional value and low calorie value. For the application of the multinomial logistic regression analysis there was no significant effect from the age and gender variation in the acceptance by children. However, statistical significance was determined in the interaction between these two variables. With 87 % acceptance rate there was potential for consumption of fish burgers in school meals.

Adaptação do paradigma orientado a notificações para desenvolvimento de sistemas fuzzy

This work proposes to adjust the Notification Oriented Paradigm (NOP) so that it provides support to fuzzy concepts. NOP is inspired by elements of imperative and declarative paradigms, seeking to solve some of the drawbacks of both. By decomposing an application into a network of smaller computational entities that are executed only when necessary, NOP eliminates the need to perform unnecessary computations and helps to achieve better logical-causal uncoupling, facilitating code reuse and application distribution over multiple processors or machines. In addition, NOP allows to express the logical-causal knowledge at a high level of abstraction, through rules in IF-THEN format. Fuzzy systems, in turn, perform logical inferences on causal knowledge bases (IF-THEN rules) that can deal with problems involving uncertainty. Since PON uses IF-THEN rules in an alternative way, reducing redundant evaluations and providing better decoupling, this research has been carried out to identify, propose and evaluate the necessary changes to be made on NOP allowing to be used in the development of fuzzy systems. After that, two fully usable materializations were created: a C++ framework, and a complete programming language (LingPONFuzzy) that provide support to fuzzy inference systems. From there study cases have been created and several tests cases were conducted, in order to validate the proposed solution. The test results have shown a significant reduction in the number of rules evaluated in comparison to a fuzzy system developed using conventional tools (frameworks), which could represent an improvement in performance of the applications.

Assessment of grazing selectivity in relation to land cover: a comparison between sheep and goats

Portugal’s Northeast production of sheep and goats are based on the exploitation of landscape by-products such as spontaneous native vegetation and agriculture leftovers. Shepherds tend the flocks throughout grazing itineraries every day, crossing a mosaic of patches of varied land uses. During the journey, the shepherd acts together with the sheep and goats to select each patch in creating an ordered sequence of land uses. The focus of the research is on the land-use composition of the grazing itineraries; determinate how they depend on the patterns of the landscape mosaic. It is utilized a data set of 26 monthly herd’s itineraries, 13 of sheep and 13 of goats, to investigate the relationship of the land uses crossed by the flocks and the land uses of the landscape, evaluating the land-use preferences and selectivity of the sheep and goats. It is utilized the divergences in the time spent and distance travelled by the herds and the area of the land uses in the landscape, the chi-square test to relate the preferred land used and the season, and the discriminate analysis to distinguish the preferences and the selectivity of the herd of sheep and the herd of goats. The herds of the sheep and the goats presented different land-use preferences over the seasons and the discriminant analysis shows that they have different landscape preferences. The herd of sheep has the highest selectivity indexes for the annual irrigated crops, the agricultural complex systems and the agroforestry land uses. The highest selectivity indexes for the herd of goats were found for the deciduous forest, the agriculture with natural and semi-natural spaces and the shrublands land uses. It was concluded that the landscape management for sheep and goats herding has to be different: the agricultural land uses are essential to the flocks of sheep and the forest land uses are decisive to the flocks of goats.

Estudo da proteína humana centrossomal TBCCD1 em condições de stress oxidativo causado por H2O2 em estado estacionário

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz

Dephosphorization of Iron Ore through Bioleaching

Phosphorus, as phosphate, is frequently found as a constituent of many of the world iron resources. Phosphorus is an extremely harmful element found in iron ore used as a raw material in the steelmaking process because it will affect the quality of iron and steel products. Allowable phosphorus concentration in high quality steel is usually less than 0.08%. Dephosphorization of iron ore has been studied for a long time. Although there are described physical beneficiation and chemical leaching processes, involving inorganic acids, to reduce phosphorus content of iron ores, these processes have several limitations such as poor recovery, require high energy quantity, capital costs and cause environmental pollution. Use of microorganisms in leaching of mineral ores is gaining importance due to the implementation of stricter environmental rules. Microbes convert metal compounds into their water soluble forms and are biocatalysts of leaching processes. Biotechnology is considered as an eco-friendly, promising, and revolutionary solution to these problems. Microorganisms play a critical role in natural phosphorus cycle and the process of phosphate solubilization by microorganisms has been known for many years. This study was performed to analyze the possibility of using bioleaching as a process for the dephosphorization of an iron ore from Northeast of Portugal. For bioleaching, Acidithiobacillus ferrooxidans bacterium were used. For this study two experiments were done with different conditions, which lasts 6 weeks for first experiment and 5 weeks for second experiment. From the result of these preliminary studies, it was observed that for first experiment 6.2 % and for second experiment 3.7 % of phosphorus was removed from iron ore.

Formulação e caracterização de matérias-primas para revestimento cerâmico Semi-Poroso com adição de chamote de telhas

The ceramics industry in Piauí is nowadays with 55 industries where 11 are in Teresina which is the mainstream of the state, producing 55 million shingles; in which 10 % is of this production is wasted being sometimes thrown on the margins of rivers, roads and highways provoking an environmental degradation. The main goal of this work is to verify the potential of producing semi porous ceramic using grog of shingles, on the first part of this work bodies-of-proof were produced from a basic formula of an industry, doping it with 5 %, 10 %, 15 % and 20 % in mass and in the second part of this work some bodies-of-proof were produced from a formula where one raw material was substituted by 50 % of grog and another substituting it all by grog, bodies-of-proof made of a basic formula previously announced was used for experiment control.The grog and the raw materials were characterized by: particle size analysis , thermal differential analysis, X ray diffraction , X ray fluorescence, an thermal gravimetric analysis and rational analyses. The bodies-of-proof were sintetisized in an industrial oven obeying the normal cycle adopted by an industry, with peak temperatures of 1135 oC and a fast burning cycle of 25 minutes having as energetic fuel liquefied petroleum gas . The pieces that were obtained by this were submersed in rehearsed physics of: water absorption of, apparent specific mass, apparent porosity, lineal retraction, rupture tension to the flexural and dilatometry; mineralogical analysis for X ray diffraction; and microstructural for electronic microscope of sweeping. For all the formulas with addition of grog, superior priorities to the requested by the requirements for semi porous and for the formula to F2-2,5 superior priorities to standard formulas which justifies the incorporation of the shingles in mass for the semi porous ceramic

Desenvolvimento de cerâmica vermelha utilizando rejeitos da construção civil

The Industry of the Civil Construction has been one of the sectors that most contribute to the pollution of the environment, due to the great amount of residues generated by the construction, demolition and the extraction of raw material. As a way of minimizing the environmental impacts generated by this industry, some governmental organizations have elaborated laws and measures about the disposal of residues from the building construction (CONAMA - resolution 307). This work has as objective the reutilization of residues compound of sand, concrete, cement, red bricks and blocks of cement and mortar for the production of red ceramic, with the objective of minimizing costs and environmental impacts. The investigated samples contained 0% to 50% of residues in weight, and they were sintered at temperatures of 950°C, 1000°C, 1050°C, 1100°C and 1150°C. After the sinterization, the samples were submitted to tests of absorption of water, linear retraction, resistance to bending, apparent porosity, specific density, XRD and SEM. Satisfactory results were obtained in all studied compositions, with the possible incorporation of up to 50% of residues in ceramic mass without great losses in the mechanical strength, giving better results to the incorporation of 30% of residues in the fabrication of ceramic parts, such as roofing tiles, bricks masonry and pierced bricks

Modelo de decisão multicritério para seleções interciclo das universidades novas: estudo na Universidade Federal do Rio Grande do Norte

The discussions wherein develop proposals for university reform in Brazil include, among other things, the conception of the university titled "New University", whose structural origin comes from the bill of higher education reform and unification of the foundations of education European upper (Bologna process). At its core, the Bologna process has imposed a series of transformations, among which, the promotion of mobility, as a stimulus to interinstitutional cooperation to enable an better and bigger qualification of the students. Nevertheless, what we see is that this point is one of the main points made flawed by Brazilian institutions that have adopted this model of higher education. An example is the Bachelor of Science and Technology - BC&T, Federal University of Rio Grande do Norte - UFRN, where there are problems of the internal order, represented by the problem of the reusing of the disciplines, such also of external order, in cases of transfers interinstitutional. Because of this, and knowing that this is a typical problem in which multiple criteria are involved, the aim of this study is to propose a multicriteria model for selection of interciclo of the BC&T of the UFRN which addresses the issue of mobility. For this, this study was of exploratory and study case nature, use as tools of data collection, the bibliographic and documentary research, as well as semi-structured interviews. For the elaboration of the model, were used the five phases most commonly used in the modeling of problems in operational research in a sample of 91 students of BC&T. As a result, we obtained a model that addresses the issue of internal and external mobility of the school and that, moreover, was also more robust and fair than the current model of BC&T and also what is used in other courses of the UFRN, taking into consideration the expected results by the decision makers

Avaliação da potencialidade dos resíduos de gesso de revestimento incorporados em formulações de massas cerâmicas

In building, during the implementation process of major or even minor works, there is a considerable waste of plaster in the steps of coating, making it is a negative factor because of the loss of these processes constructive remains incorporated into buildings, as component, whose final dimensions are higher than those projected. Another negative factor is the disposal of waste gypsum in inappropriate places, thus contributing to the degradation of environmental quality, due to the leaching of this waste and may trigger the formation of sulfuric acid. Therefore, based on this picture, processing and reuse of waste coating, combined with the ceramics industry, which is a strong potential in the reuse of certain types of waste, promote mutual benefits. Thus the overall objective of this work is to conduct a search with scientific and technological aspects, to determine the effect of the incorporation of the residue of plaster for coating, from the building, the formulation of bodies for red ceramic. The residue of plaster coating was collected and characterized. They were also selected raw materials of two ceramic poles of the state of Rio Grande do Norte and formulations have been made with the intention of obtaining those with the best physical and mechanical properties, the residue was added the percentage of 5%, 10%, 15%, 20%, 25% and 30%, in the best formulation of ceramic industry 1 and, according the properties analyses, 5%, 10% and 15% as the best results of ceramic industry 2. The samples were sintered at temperatures of 850 ºC, 950 °C and 1050 °C, the heating rate of 5 ºC / min with isotherm of two hours. They were submitted to testing technology, such as lineal shrinkage, water absorption, apparent porosity, apparent density and bending resistence. The residue incorporation best results in the formulations of mass in red ceramic, were observed between the temperatures of 850 ºC and 950 ºC, in those formulations that have illite clays and medium plastic in their composition, in the range of 0% to 15% residue incorporated

Visit Cabo Verde

A indústria turística tem-se focado na diversificação, de forma contínua, tornando-se um dos motores fundamentais para o progresso dos setores económicos de um país. Para tal, o desenvolvimento de um Produto Turístico de sucesso que visa oferecer ao público-alvo uma experiência memorável para satisfazer o seu desejo é essencial para que este consumidor venha a visitar um determinado destino. A nova era digital transformou a estratégia de marketing das empresas e esta nova conjuntura tem vindo a contribuir para o crescimento exponencial e para o desenvolvimento das técnicas e ferramentas que permitem promover a comunicação entre a empresa/marca e o consumidor, aspeto em que o marketing digital tem desempenhado um papel importante. Em tempos de valorização da experiência turística, o setor turístico de Cabo Verde pouco tem explorado e não tem tirado grande partido do marketing digital para dar a conhecer as potencialidades e as maravilhas do destino enquanto produto turístico, que ainda tem muito por descobrir por parte dos consumidores nacionais e internacionais. Como objetivos deste plano de comunicação Visit Cabo Verde pretende-se aumentar a notoriedade da marca Cabo Verde e captar novos turistas através da promoção de 4 ilhas: Santiago, São Vicente, Santo Antão e Boavista dividindo-as em 3 (três) subprodutos - cultura, natureza e praia. Com a realização deste projeto prevê-se que Cabo Verde atinja o público-alvo definido através da conceção das campanhas relevantes para os potenciais turistas e aumentar o fluxo dos turistas no arquipélago. As limitações deste plano de comunicação incidem sobre a variável produto que não é controlável, procurando este plano uma linha de orientação para a variável comunicação.