Grid Integration of Offshore Wind Farms Using Modular Marx Multilevel Converters

This paper proposes the use of a Modular Marx Multilevel Converter, as a solution for energy integration between an offshore Wind Farm and the power grid network. The Marx modular multilevel converter is based on the Marx generator, and solves two typical problems in this type of multilevel topologies: modularity and dc capacitor voltage balancing. This paper details the strategy for dc capacitor voltage equalization. The dynamic models of the converter and power grid are presented in order to design the converter ac output voltages and the dc capacitor voltage controller. The average current control is presented and used for power flow control, harmonics and reactive power compensation. Simulation results are presented in order to show the effectiveness of the proposed (MC)-C-3 topology.

Solid-State Bipolar Marx Generator with Voltage Droop Compensation

This paper addresses the voltage droop compensation associated with long pulses generated by solid-stated based high-voltage Marx topologies. In particular a novel design scheme for voltage droop compensation in solid-state based bipolar Marx generators, using low-cost circuitry design and control, is described. The compensation consists of adding one auxiliary PWM stage to the existing Marx stages, without changing the modularity and topology of the circuit, which controls the output voltage and a LC filter that smoothes the voltage droop in both the positive and negative output pulses. Simulation results are presented for 5 stages Marx circuit using 1 kV per stage, with 1 kHz repetition rate and 10% duty cycle.

Relatório de estágio. Terapia manual ortopédica

Este estudo refere-se a uma paciente de 33 anos com paralisia do nervo toráxico longo direito e consequente atrofia do grande dentado A paciente foi acompanhada durante 7 meses no serviço de Fisioterapia e tratada segundo as guidelines para o tratamento desta patologia. Após estabilização de resultados, por não apresentar mais melhoria, foi sujeita a análise electromigráfica no sentido de perceber quais as estratégias utilizadas pela paciente para compensar o défice do grande dentado, na manutenção de 4 movimentos: Elevação anterior a 90º, elevação lateral a 90º, elevação lateral no plano da omoplata a 90º e no push-up contra a parede. Foram avaliados o trapézio superior, médio e inferior, bem como o grande dentado. Verificou-se que não existe um padrão de activação consistente dos estabilizadores da omoplata em cadeia cinética aberta, sendo que o padrão é mantido em cadeia cinética fechada.

Fast optimum-predictive control and capacitor voltage balancing strategy for bipolar back-to-back NPC converters in high-voltage direct current transmission systems

Multilevel power converters have been introduced as the solution for high-power high-voltage switching applications where they have well-known advantages. Recently, full back-to-back connected multilevel neutral point diode clamped converters (NPC converter) have been used inhigh-voltage direct current (HVDC) transmission systems. Bipolar-connected back-to-back NPC converters have advantages in long-distance HVDCtransmission systems over the full back-to-back connection, but greater difficulty to balance the dc capacitor voltage divider on both sending and receiving end NPC converters. This study shows that power flow control and dc capacitor voltage balancing are feasible using fast optimum-predictive-based controllers in HVDC systems using bipolar back-to-back-connected five-level NPC multilevel converters. For both converter sides, the control strategytakes in account active and reactive power, which establishes ac grid currents in both ends, and guarantees the balancing of dc bus capacitor voltages inboth NPC converters. Additionally, the semiconductor switching frequency is minimised to reduce switching losses. The performance and robustness of the new fast predictive control strategy, and its capability to solve the DC capacitor voltage balancing problem of bipolar-connected back-to-back NPCconverters are evaluated.

Transient analysis of variable-speed wind turbines at wind speed disturbances and a pitch control malfunction

As wind power generation undergoes rapid growth, new technical challenges emerge: dynamic stability and power quality. The influence of wind speed disturbances and a pitch control malfunction on the quality of the energy injected into the electric grid is studied for variable-speed wind turbines with different power-electronic converter topologies. Additionally, a new control strategy is proposed for the variable-speed operation of wind turbines with permanent magnet synchronous generators. The performance of disturbance attenuation and system robustness is ascertained. Simulation results are presented and conclusions are duly drawn. (C) 2010 Elsevier Ltd. All rights reserved.

Soluções de reabilitação de rebocos exteriores em edifícios antigos

Associando o papel que a reabilitação de edifícios pode vir a registar de futuro aos rebocos de edifícios antigos, o trabalho desenvolvido pretende apresentar diferentes soluções de reabilitação consoante o suporte em causa, com base nas características fundamentais exigidas na execução de rebocos. O trabalho realizado incluiu uma campanha experimental, em laboratório e in-situ, onde se avaliou a influência de alguns factores de aplicação (tipo de argamassa, natureza do suporte, número de camadas e espessura da camada) no desempenho mecânico (ultra-sons, resistência à compressão e flexão, pull-off, martelo de schimdt, retração), físico (tubos de Karsten, humidade superficial e absorção por capilaridade) e químico (pH e teor em sais) e as funções a respeitar numa solução de reabilitação. Assim sendo, foram estabelecidos três tipos de rebocos – praticado em obra, tradicional e pré-doseado – e três suportes – betão, pedra e tijolo – por forma a conhecer as características de cada um a curto prazo e a sua adequabilidade aos suportes usados. Com a realização dos ensaios também foi possível identificar e analisar os aspectos que condicionam os resultados alcançados e como tal, a interpretação dos dados exige prudência.

Migracion, prácticas artísticas y artivismos

Una de las potencialidades del arte es devenir una herramienta para enfocar determinados conflictos desde nuevos ángulos y articular preguntas que impacten en la comunidad. Aquí el arte se funde con la filosofía, la sociología, la antropología, con el activismo, y con la propia vida. A partir de tales parámetros, se esbozarán diversas propuestas artísticas que ilustran cómo distintos creadores abordan –desde distintos ángulos– el fenómeno de la migración Dentro de la amplia miríada de perspectivas desde las que se puede tratar la migración es interesante resaltar el trabajo de varios artistas que se transforman en altavoces de las experiencias de otras personas, tal y como ejemplifican los proyectos de Pep Dardanyà, Marisa González, He Chengyue y Josep María Martín. Desde un ángulo radicalmente distinto, Santiago Sierra y el colectivo Yes lab reproducen y llevan al límite las mismas dinámicas de explotación que critican, y para finalizar, bajo el prisma de la experiencia vivida, la artista Fiona Tan explora su propio proceso migratorio e investiga la construcción de la identidad.

Planeamento espacial marinho das áreas marinhas protegidas: o caso de estudo da ára protegida de gestão de recursos: Caloura - ilhéu de Vila Franca do Campo

Tese de Doutoramento, Ciências do Mar (Ecologia Marinha), 26 de Novembro de 2013, Universidade dos Açores.

Interpretation of gravity data to delineate structural features connected to low-temperature geothermal resources at Northeastern Portugal

A great number of low-temperature geothermal fields occur in Northern-Portugal related to fractured rocks. The most important superficial manifestations of these hydrothermal systems appear in pull-apart tectonic basins and are strongly conditioned by the orientation of the main fault systems in the region. This work presents the interpretation of gravity gradient maps and 3D inversion model produced from a regional gravity survey. The horizontal gradients reveal a complex fault system. The obtained 3D model of density contrast puts into evidence the main fault zone in the region and the depth distribution of the granitic bodies. Their relationship with the hydrothermal systems supports the conceptual models elaborated from hydrochemical and isotopic water analyses. This work emphasizes the importance of the role of the gravity method and analysis to better understand the connection between hydrothermal systems and the fractured rock pattern and surrounding geology. (c) 2013 Elsevier B.V. All rights reserved.

Start-up circuit for low-power indoor light energy harvesting applications

A start-up circuit, used in a micro-power indoor light energy harvesting system, is described. This start-up circuit achieves two goals: first, to produce a reset signal, power-on-reset (POR), for the energy harvesting system, and secondly, to temporarily shunt the output of the photovoltaic (PV) cells, to the output node of the system, which is connected to a capacitor. This capacitor is charged to a suitable value, so that a voltage step-up converter starts operating, thus increasing the output voltage to a larger value than the one provided by the PV cells. A prototype of the circuit was manufactured in a 130 nm CMOS technology, occupying an area of only 0.019 mm(2). Experimental results demonstrate the correct operation of the circuit, being able to correctly start-up the system, even when having an input as low as 390 mV using, in this case, an estimated energy of only 5.3 pJ to produce the start-up.

A 5GHz/1.8V CMOS Active Balun Integrated with LNA

The development of high performance monolithic RF front-ends requires innovative RF circuit design to make the best of a good technology. A fully differential approach is usually preferred, due to its well-known properties. Although the differential approach must be preserved inside the chip, there are cases where the input signal is single-ended such as RF image filters and IF filters in a RF receiver. In these situations, a stage able to convert single-ended into differential signals (balun) is needed. The most cited topology, which is capable of providing high gain, consists on a differential stage with one of the two inputs grounded. Unfortunately, this solution has some drawbacks when implemented monolithically. This work presents the design and simulated results of an innovative high-performance monolithic single to differential converter, which overcomes the limitations of the circuits.The integration of the monolithic active balun circuit with an LNA on a 0.18μm CMOS process is also reported. The circuits presented here are aimed at 802.11a. Section 2 describes the balun circuit and section 3 presents its performance when it is connected to a conventional single-ended LNA. Section 4 shows the simulated performance results focused at phase/amplitude balance and noise figure. Finally, the last section draws conclusions and future work.

O desenvolvimento da motricidade na criança e as expressões: um estudo em contexto de Pré-Escolar e 1º ciclo do Ensino Básico

Mestrado (PES II), Educação Pré-Escolar e Ensino do 1º Ciclo do Ensino Básico, 26 de Junho de 2014, Universidade dos Açores.

Comando de ondulador de tensão trifásico por PWM e técnica U/F com implementação por microcontrolador

Dissertação para obtenção do grau de Mestre em Engenharia Electrotécnica Ramo de Automação e Electrónica Industrial

Fonte de carga de condensadores de alta tensão com compensação de fator potência

Trabalho Final de Mestrado para a obtenção do grau de Mestre em Engenharia Electrotécnica Ramo de Automação e Electrónica Industrial

Controlo directo de binário de uma máquina assíncrona trifásica

Dissertação para obtenção do grau de Mestre em Engenharia Electrotécnica Ramo de Automação e Electrónica Industrial