The economic burden of alcohol dependence in europe.

AIMS: To determine the economic burden pertaining to alcohol dependence in Europe. METHODS: Database searching was combined with grey literature searching to identify costs and resource use in Europe relating to alcohol dependence as defined by the Diagnostic and Statistical Manual of Mental Disorders (DSM-IV) or the World Health Organisation's International Classification of Diseases (ICD-10). Searches combined MeSH headings for both economic terms and terms pertaining to alcohol dependence. Relevant outcomes included direct healthcare costs and indirect societal costs. Main resource use outcomes included hospitalization and drug costs. RESULTS: Compared with the number of studies of the burden of alcohol use disorders in general, relatively few focussed specifically on alcohol dependence. Twenty-two studies of variable quality were eligible for inclusion. The direct costs of alcohol dependence in Europe were substantial, the treatment costs for a single alcohol-dependent patient lying within the range euro1591-euro7702 per hospitalization and the annual total direct costs accounting for 0.04-0.31% of an individual country's gross domestic product (GDP). These costs were driven primarily by hospitalization; in contrast, the annual drug costs for alcohol dependence were low. The indirect costs were more substantial than the direct costs, accounting for up to 0.64% of GDP per country annually. Alcohol dependence may be more costly in terms of health costs per patient than alcohol abuse. CONCLUSIONS: This review confirms that alcohol dependence represents a significant burden for European healthcare systems and society. Difficulties in comparing across cost-of-illness studies in this disease area, however, prevent specific estimation of the economic burden.

Monitoring network optimisation for spatial data classification using support vector machines

The paper presents a novel method for monitoring network optimisation, based on a recent machine learning technique known as support vector machine. It is problem-oriented in the sense that it directly answers the question of whether the advised spatial location is important for the classification model. The method can be used to increase the accuracy of classification models by taking a small number of additional measurements. Traditionally, network optimisation is performed by means of the analysis of the kriging variances. The comparison of the method with the traditional approach is presented on a real case study with climate data.

Classification and Pay Plans FY2014, June 2013

This document Classifications and Pay Plans is produced by the State of Iowa Executive Branch, Department of Administrative Services. Informational document about the pay plan codes and classification codes, how to use them.

Characterization and classification of matrix effects in biological samples analyses.

An exhaustive classification of matrix effects occurring when a sample preparation is performed prior to liquid-chromatography coupled to mass spectrometry (LC-MS) analyses was proposed. A total of eight different situations were identified allowing the recognition of the matrix effect typology via the calculation of four recovery values. A set of 198 compounds was used to evaluate matrix effects after solid phase extraction (SPE) from plasma or urine samples prior to LC-ESI-MS analysis. Matrix effect identification was achieved for all compounds and classified through an organization chart. Only 17% of the tested compounds did not present significant matrix effects.

Asphalt Cement Concrete Longitudinal Joint Adhesive Crafco PN 34524 (Iowa DOT New Product C-98-7), HR-2084, 2000

The joint between two lanes of asphalt pavement is often the first area of a roadway which shows signs of deterioration and requires maintenance. As the final lift of hot asphalt is being placed in a construction project, it is being forced p against the adjoining lane of cold asphalt, forming the longitudinal joint. The mating of the two lanes, to form a high quality seal, is often not fully successful and later results in premature stripping or raveling as water enters the unsealed joint. The application of a hot poured rubberized asphaltic joint sealant along the joint face in the final stage of construction should help to form a watertight joint seal. A new product, especially formulated for the longitudinal joint in asphalt pavements was proposed to improve joint sealing. The following describes the experimental application of the new product, Crafco, PN 34524.

Development of an Improved Agricultural-Based Deicing Product, TR-581, 2010

Snow and ice removal on public streets is a critical part of the work of departments of transportation in northern U.S. states, including Iowa. Iowa is also a state rich in agricultural resources, some of which undergo industrial processes that generate a number of byproducts, e.g., in converting corn to ethanol or soy to biodiesel. It would be desirable to find those that, with a minimum of additional processing, can be used as a deicing compound, either alone or in combination with products currently in use. The focus of this work is therefore to investigate by-products from agricultural processes that may be suitable for use as deicing applications. This topic has been investigated in the past by others, with many patented products described in the literature. An initial screening was carried out to assess the potential acceptability of selected commercial products, as well as a glycerol developed for this project. Based on the variety of parameters tested, the product combination that shows the greatest promise for future application consists of 80% glycerol with 20% NaCl.

Typologies textuelles et partitions musicales : dissimilarités, classification et autocorrélation

Axée dans un premier temps sur le formalisme et les méthodes, cette thèse est construite sur trois concepts formalisés: une table de contingence, une matrice de dissimilarités euclidiennes et une matrice d'échange. À partir de ces derniers, plusieurs méthodes d'Analyse des données ou d'apprentissage automatique sont exprimées et développées: l'analyse factorielle des correspondances (AFC), vue comme un cas particulier du multidimensional scaling; la classification supervisée, ou non, combinée aux transformations de Schoenberg; et les indices d'autocorrélation et d'autocorrélation croisée, adaptés à des analyses multivariées et permettant de considérer diverses familles de voisinages. Ces méthodes débouchent dans un second temps sur une pratique de l'analyse exploratoire de différentes données textuelles et musicales. Pour les données textuelles, on s'intéresse à la classification automatique en types de discours de propositions énoncées, en se basant sur les catégories morphosyntaxiques (CMS) qu'elles contiennent. Bien que le lien statistique entre les CMS et les types de discours soit confirmé, les résultats de la classification obtenus avec la méthode K- means, combinée à une transformation de Schoenberg, ainsi qu'avec une variante floue de l'algorithme K-means, sont plus difficiles à interpréter. On traite aussi de la classification supervisée multi-étiquette en actes de dialogue de tours de parole, en se basant à nouveau sur les CMS qu'ils contiennent, mais aussi sur les lemmes et le sens des verbes. Les résultats obtenus par l'intermédiaire de l'analyse discriminante combinée à une transformation de Schoenberg sont prometteurs. Finalement, on examine l'autocorrélation textuelle, sous l'angle des similarités entre diverses positions d'un texte, pensé comme une séquence d'unités. En particulier, le phénomène d'alternance de la longueur des mots dans un texte est observé pour des voisinages d'empan variable. On étudie aussi les similarités en fonction de l'apparition, ou non, de certaines parties du discours, ainsi que les similarités sémantiques des diverses positions d'un texte. Concernant les données musicales, on propose une représentation d'une partition musicale sous forme d'une table de contingence. On commence par utiliser l'AFC et l'indice d'autocorrélation pour découvrir les structures existant dans chaque partition. Ensuite, on opère le même type d'approche sur les différentes voix d'une partition, grâce à l'analyse des correspondances multiples, dans une variante floue, et à l'indice d'autocorrélation croisée. Qu'il s'agisse de la partition complète ou des différentes voix qu'elle contient, des structures répétées sont effectivement détectées, à condition qu'elles ne soient pas transposées. Finalement, on propose de classer automatiquement vingt partitions de quatre compositeurs différents, chacune représentée par une table de contingence, par l'intermédiaire d'un indice mesurant la similarité de deux configurations. Les résultats ainsi obtenus permettent de regrouper avec succès la plupart des oeuvres selon leur compositeur.

Time-Temperature Strength-Reaction Product Relationships in Lime-Bentonite-Water Mixtures, HR-111, 1965

The interrelation of curing time, curing temperature, strength, and reactions in lime-bentonite-water mixtures was examined. Samples were molded at constant density and moisture content and then cured for periods of from 1 to 56 days at constant temperatures that ranged from 5C to 60C. After the appropriate curing time the samples were tested for unconfined compressive strength. The broken samples were then analyzed by x-ray diffractometer and spectrophotometer to determine the identity of the reaction products present after each curing period. It was found that the strength gain of lime-clay mixtures cured at different temperatures is due to different phases of the complex reaction, lime & clay to CSH(gel) to CSH(II) to CSH(I) to tobermorite. The farther the reaction proceeds, the higher the strength. There was also evidence of lattice substitutions in the structure of the calcium silicate hydrates at curing temperatures of 50C and higher. No consistent relationship between time, temperature, strength, and the S/A ration of reaction products existed, but in order to achieve high strengths the apparent C/S ration had to be less than two. The curing temperature had an effect on the strength developed by a given amount of reacted silica in the cured lime-clay mixture, but at a given curing temperature the cured sample that had the largest amount of reacted silica gave the highest strength. Evidence was found to indicate that during the clay reaction some calcium is indeed adsorbed onto the clay structure rather than entering into a pozzolanic reaction. Finally, it was determined that it is possible to determine the amount of silica and alumina in lime-clay reaction products by spectrophotometric analysis with sufficient accuracy for comparison purposes. The spectrophotometric analysis techniques used during the investigation were simple and were not time consuming.

Allergic reactions following contrast material administration: nomenclature, classification, and mechanisms

In forensic pathology routine, fatal cases of contrast agent exposure can be occasionally encountered. In such situations, beyond the difficulties inherent in establishing the cause of death due to nonspecific or absent autopsy and histology findings as well as limited laboratory investigations, pathologists may face other problems in formulating exhaustive, complete reports, and conclusions that are scientifically accurate. Indeed, terminology concerning adverse drug reactions and allergy nomenclature is confusing. Some terms, still utilized in forensic and radiological reports, are outdated and should be avoided. Additionally, not all forensic pathologists master contrast material classification and pathogenesis of contrast agent reactions. We present a review of the literature covering allergic reactions to contrast material exposure in order to update used terminology, explain the pathophysiology, and list currently available laboratory investigations for diagnosis in the forensic setting.

Tire traces: discrimination and classification of pyrolysis-GC/MS profiles

Tire traces can be observed on several crime scenes as vehicles are often used by criminals. The tread abrasion on the road, while braking or skidding, leads to the production of small rubber particles which can be collected for comparison purposes. This research focused on the statistical comparison of Py-GC/MS profiles of tire traces and tire treads. The optimisation of the analytical method was carried out using experimental designs. The aim was to determine the best pyrolysis parameters regarding the repeatability of the results. Thus, the pyrolysis factor effect could also be calculated. The pyrolysis temperature was found to be five time more important than time. Finally, a pyrolysis at 650 °C during 15 s was selected. Ten tires of different manufacturers and models were used for this study. Several samples were collected on each tire, and several replicates were carried out to study the variability within each tire (intravariability). More than eighty compounds were integrated for each analysis and the variability study showed that more than 75% presented a relative standard deviation (RSD) below 5% for the ten tires, thus supporting a low intravariability. The variability between the ten tires (intervariability) presented higher values and the ten most variant compounds had a RSD value above 13%, supporting their high potential of discrimination between the tires tested. Principal Component Analysis (PCA) was able to fully discriminate the ten tires with the help of the first three principal components. The ten tires were finally used to perform braking tests on a racetrack with a vehicle equipped with an anti-lock braking system. The resulting tire traces were adequately collected using sheets of white gelatine. As for tires, the intravariability for the traces was found to be lower than the intervariability. Clustering methods were carried out and the Ward's method based on the squared Euclidean distance was able to correctly group all of the tire traces replicates in the same cluster than the replicates of their corresponding tire. Blind tests on traces were performed and were correctly assigned to their tire source. These results support the hypothesis that the tested tires, of different manufacturers and models, can be discriminated by a statistical comparison of their chemical profiles. The traces were found to be not differentiable from their source but differentiable from all the other tires present in the subset. The results are promising and will be extended on a larger sample set.

SEPT4, a p53 target gene product, implicates p 53 in the regulation of exocytosis

Résumé : Le cancer, qui est responsable d'un quart des décès en Suisse, exhibe un état cellulaire désordonné, qui lui-même, est la conséquence d'un dérèglement des gènes. Le gène le plus fréquemment altéré, dans les cas de cancers humains, est p53. Ce gène encode un facteur de transcription, impliqué dans la régulation de nombreux gènes impliqués dans le cycle cellulaire, l'apoptose ou la différenciation. Notre laboratoire a récemment identifié seize nouveaux gènes, dont l'expression est régulée par p53, parmi lesquels sept4, su jet de cette thèse. La protéine 5EPT4 appartient à la famille des septines, qui est impliquée dans la cytokinèse. Dans ce travail, nous avons confirmé la régulation de l'expression de sept4 par p53 dans des tissus de souris, et étonnamment, seul un des deux promoteurs du gène sept4 est contrôlé par p53. En outre, l'approche immunohistologique nous a permis de supposer une implication de la protéine SEPT4 dans le mécanisme de l'exocytose. Cette hypothèse a été confirmée par l'interaction de SEPT4 avec la protéine syntaxine 1A, et par son activité inhibitrice sur la sécrétion stimulée. En élargissant l'étude de la protéine SEPT4, nous avons découvert que celle-ci avait comme partenaire fonctionnel, la protéine Pinl, une enzyme qui catalyse l'isomérisation cis-trans du lien peptidique précédant une proline. bans ce contexte, nous avons démontré que l'interaction entre ces deux protéines reposait sur le domaine WW de Pinl, un type de domaine reconnaissant les motifs phosphoséryl-prolyl et phosphothréonyl-prolyl. Ce dernier résultat nous a conduit à examiner la phosphorylation de 5EPT4. Nous avons démontré que la partie N-terminale de SEPT4 était phosphorylée par la kinase Cdk5. La co¬expression de Cdk5 et de SEPT4 stimule la dégradation de SEPT4, indépendamment de la voie du protéasome. Ainsi, l'ensemble de nos observations fournissent l'évidence de l'engagement de la protéine SEPT4 dans la régulation de l'exocytose, et soutiennent le rôle de p53 dans le contrôle de l'exocytose, via SEPT4, ce qui constituerait un nouveau rôle fonctionnel pour ce gardien du génome. Summary: Cancer, which is responsible for a quarter of the deaths in Switzerland, exhibits a disordered cellular state, which itself, is the consequence of an altered state of genes. The most frequently altered gene in human cancer is p53. This gene encodes a transcription factor, implicated in the regulation of numerous genes involved in cell cycle, apoptosis or differentiation. Our laboratory has recently identified sixteen new genes whose expression is regulated by p53, amongst them septin 4, which is the subject of this thesis. The SEPT4 protein belongs to the septin family which is implicated in cytokinesis. In the present work, we have confirmed the regulation of sept4 expression by p53 in mouse tissues, and surprisingly, only one of the two sept4 promoters is regulated by p53. In addition, the immunohistologic approach enabled us to suppose a role of SEPT4 in exocytosis. This assumption was confirmed by the interaction of SEPT4 with syntaxin 1A, and by its inhibiting activity on stimulated secretion. By widening the analysis of SEPT4, we identified Pin1 as an interacting protein. Pin1 is an enzyme which catalyzes the cis-trans isomerization of the peptide bond preceding a proline residue. In this context, we showed that the interaction between these two proteins depends on the WW domain of Pin 1. This domain has been shown to function as a phosphoserine- or phosphothreonine¬binding module. This last result prompted us to examine phosphorylation of SEPT4. We demonstrated that the N-terminal portion of SEPT4 was phosphorylated by the Cdk5 kinase. The co-expression of Cdk5 with 5EPT4 stimulates SEPT4 degradation, independently of the proteasome pathway. Thus, these observations provide evidence for the engagement of SEPT4 in the regulation of exocytosis, and supports the role of p53 in the control of exocytosis, via SEPT4, which constitutes a new functional role for this guardian of the genome.