Effects of powder preparation and sintering procedure on microstructure and dielectric properties of PLZT ceramics

PLZT ceramics belong to one of the very important groups of functional materials that make a basis for the production of a large range of electronic devices. The microstructure and properties of ceramics depend on the powder preparation and thermal processing conditions. Various techniques have been used to obtain chemically homogeneous and fine starting powders. PLZT powders have been prepared by two different production routes: by a modified Pechini method, using a polymeric precursor method (PMM) and by a partial oxalate method. A two-step sintering process, including a hot pressing, was carried out at 1100 and 1200degreesC Distinct phases obtained during the sintering process have been investigated by SEM and EDS techniques and dielectric properties such as permittivity and dielectric loss were measured in a frequency range from 1 to 20 kHz.. A significant difference in microstructure and dielectric properties, depending on powder origin and sintering procedure, has been noticed.

SYNTHESIS OF ULTRA-FINE CRYSTALLINE ZRXTI1-XO4 POWDER BY POLYMERIC PRECURSOR METHOD

Reactive ZrxTi1-xO4 (x=0.65, 0.50 and 0.35) powder was prepared by the polymeric precursor method. Studies by X-ray diffraction (XRD), nitrogen adsorption/desorption, and thermogravimetric analysis (TG) showed that powders with high crystallinity (>90%) and high surface areas (>40 m(2)/g) are obtained after calcination at 700 degrees C for 3 h. Infrared spectroscopy and XRD results showed that these titanates nucleate from the amorphous phase with no intermediate phases, at low temperature (450 degrees C).

Visible PL phenomenon at room temperature in disordered structure of SrWO4 powder

The SrWO4 (SWO) powders were synthesized by the polymeric precursor method and annealed at different temperatures. The SWO structure was obtained by X-ray diffraction and the corresponding photoluminescence (PL) spectra was measured. The PL results reveal that the structural order-disorder degree in the SWO lattice influences in the PL emission intensity. Only the structurally order-disordered samples present broad and intense PL band in the visible range. To understand the origin of this phenomenon, we performed quantum-mechanical calculations with crystalline and order-disordered SWO periodic models. Their electronic structures were analyzed in terms of band structure. The appearance of localized levels in the band gap of the order-disordered structure was evidenced and is a favorable condition for the intense PL to occur.

Influence of two methods of CaCl2 application and concentrations used to maintain passion fruit firmness

This is a report on the influence of the methods of postharvest application of CaCl2 in several concentrations, on the maintenance of the firmness of the sweet passion fruit (Passiflora alata Dryander). The fruits, picked in the pre-climateric stage, were selected desinfection with thiabendazol and submitted to CaCl2 in concentrations of 0% (control), 1%, 2%, 3% or 4% with two methods: immersion (for 2 h) and infiltration under vacuum and pressure (- 25 vacuum kPa, for 1 minute and, + 25 pressure kPa, for 1 min). All fruits were stored under refrigeration (9 degreesC, 85-90% RH), for 30 d. The fruits were evaluated for texture every 3 d. From the results, it is concluded that application of CaCl2 by infiltration favored the maintenance of fruit consistency during the first 18 days of storage. Fruits treated with 1% and 2% of CaCl2 were firmer than the others.

Processing and properties of Ag/BSCCO PIT tapes containing different proportions of silver metal powder

Monofilamentary tapes (150 pm thickness) were prepared by swaging and rolling silver tubes containing the Bi:2212 ceramic (granulation below 20 mum) and the silver powder (about 0.8 mum). The study has been made, among other samples, on tapes with nominal proportions of 0, 10 and 20 wt.% of silver. The samples were characterized by SEM, and by electrical measurements under varying applied magnetic field. The measurements of J(c) showed that the addition of 10 wt.% silver powder is very beneficent to this property, doubling the obtained values at 60 K, while the 20 wt.% tape presented very low J(c). The tape with no silver content showed to have a J(c) as high as 2.2 x 10(5) A/cm(2), at 4.2 K, zero applied magnetic field. (C) 2004 Elsevier B.V. All rights reserved.

Sugarcane molasses and yeast powder used in the Fructooligosaccharides production by Aspergillus japonicus-FCL 119T and Aspergillus niger ATCC 20611

Different concentrations of sucrose (3-25% w/v) and peptone (2-5% w/v) were studied in the formulation of media during the cultivation of Aspergillus japonicus-FCL 119T and Aspergillus niger ATCC 20611. Moreover, cane molasses (3.5-17.5% w/v total sugar) and yeast powder (1.5-5% w/v) were used as alternative nutrients for both strains' cultivation. These media were formulated for analysis of cellular growth, P-Fructosyltransferase and Fructooligosaccharides (FOS) production. Transfructosylating activity (U-t) and FOS production were analyzed by HPLC. The highest enzyme production by both the strains was 3% (w/v) sucrose and 3% (w/v) peptone, or 3.5% (w/v) total sugars present in cane molasses and 1.5% (w/v) yeast powder. Cane molasses and yeast powder were as good as sucrose and peptone in the enzyme and FOS (around 60% w/w) production by studied strains.

Persistence of some pesticides in peach fruit

The persistence of five pesticides (acephate, azinphos methyl, carbendazim, diazinon and dimethoate) in peach fruit was studied in real operating conditions. Pesticides showed different degradation rates. Diazinon was degraded with a half-life (t(1/2)) of 5.2 days, acephate, azinphos methyl and dimethoate with t(1/2) of ca 12 days and carbendazim with t(1/2) of 15.5 days. After the pre-harvest interval (PHI) all pesticide residues were within the limits established by Italian law.

Morphological and molecular characterization of Colletotrichum spp. from citrus orchards affected by postbloom fruit drop in Brazil

Brazilian isolates of Colletotrichum spp. from citrus orchards affected by postbloom fruit drop were examined for colony colour, mycelial growth, benomyl-resistance, pathogenicity, and genetic variability by random amplified polymorphic DNA (RAPD) analysis. All isolates were obtained from flowers and persistent calyxes from different citrus hosts from São Paulo, Brazil. DNA polymorphisms detected after amplification with random 10-mer primers were used to classify the isolates into two groups. Group I isolates grew rapidly on potato-dextrose agar (PDA) and were sensitive to benomyl, and group II isolates grew slowly on PDA and were benomyl-resistant. Colletotrichum acutatum was analyzed by RAPD and had high genetic similarity with group II isolates of Colletotrichum from citrus. Probably, the group I is C, gloeosporioides and group II is C. acutatum.

Sintering of ultrafine undoped SnO2 powder

The sintering process of nanometric undoped SnO2 powder was studied. No macroscopic shrinkage was observed during the sintening process. Grain growth kinetics investigation showed that surface diffusion is the dominant mechanism in the temperature range 500-1300 degreesC. For temperatures higher than 1300 degreesC, high weight loss was measured, suggesting evaporation-condensation as the dominant mass-transport mechanism. Thermogravimetric analysis (TG) and mass spectroscopy studies showed that the surface contamination of the SnO2 particles by chemical species like H2O, OH- and CO2, has a strong influence on the role of mass transport controlled by surface diffusion. (C) 2001 Elsevier B.V. Ltd. All rights reserved.

X-ray powder diffraction analysis of a new palladium(II) amino acid complex

Powder X-ray diffraction data for a new palladium(II) amino acid complex, of composition PdC12H2ON2O4S2, are presented in this paper. Orthorhombic cell parameters are: a = 10.740 angstrom, b = 19.999 angstrom, and c = 5.2470 angstrom. (c) 2004 International Centre for Diffraction Data.

Room temperature co-precipitation of nanocrystalline CeO2 and Ce0.8Gd0.2O1.9-delta powder

This paper describes a simple method to co-precipitate CeO2 and Ce0.8Gd0.2O1.9-delta with ammonium hydroxide from solvents such as: water, ethylene glycol, ethyl alcohol and isopropyl alcohol. Characterization by Raman spectroscopy and XRD evidenced the formation of a solid solution of gadolinium-doped ceria at room temperature. Nanometric particles with crystallite size of 3.1 nm were obtained during synthesis using ethyl alcohol as solvent. This is a promising result compared with those mentioned in the literature, in which the smallest crystallite size reported was, 6.5 nm. (c) 2006 Elsevier B.V. All rights reserved.

Identification and characterization of Colletotrichum spp. affecting fruit after harvest in Brazil

Colletotrichum spp. cause anthracnose in various fruits post-harvest and are a particularly important problem in tropical and subtropical fruits. The disease in fruits of avocado, guava, papaya, mango and passion fruit has been reported to be caused by C. gloeosporioides, and in banana by C. musae. In subtropical and temperate crops such apple, grape, peach and kiwi, the disease is caused by C. acutatum. The variation in pathogenic, morphological, cultural and molecular characteristics of Brazilian isolates of Colletotrichum acutatum Simmonds and isolates from post-harvest decays of avocado, banana, guava, papaya, mango and passion fruit was evaluated. The fruits were inoculated with mycelium of C. acutatum, Colletotrichum spp. and C. musae on a disc of potato dextrose agar. The morphological, cultural and molecular characteristics studied were conidia morphology, colony growth at different temperatures, colony coloration and PCR with primers CaInt2 and ITS4 for C. acutatum and CgInt and ITS4 for C. gloeosporioides. C. acutatum was pathogenic to avocado, guava, papaya, mango and passion fruit, but it was not pathogenic to banana. The morphological, cultural and molecular studies indicated that the avocado, papaya, mango and passion fruit isolates were C. gloeosporioides. The natural guava isolate was identified as C. acutatum, which had not been found previously to produce anthracnose symptoms on guava in Brazil.

Attraction of the fruit-eating bat Carollia perspicillata to Piper gaudichaudianum essential oil

We performed field tests using mimetic Piper fruits with and without essential oil extracted through hydrodistillation from Piper gaudichaudianum ripe fruits in order to evaluate the role of odor in Carollia perspicillata attraction and capture in mist-nets. During the field tests, 26 C. perspicillata were captured, 21 (80.7%) in nets with the essential oil of P. gaudichaudianum and five (19.3%) in nets without oil. Other bat species, Artibeus spp. ( 67), which is specialized on fruits of Moraceae, and Sturnira lilium ( 10), specialized on those of Solanaceae, were also captured, but they exhibited no significant preference for nets with or without oil. We conclude that odor is pre-eminent over visual cues in food location by C. perspicillata in a field situation. Based on the result, we propose the extraction and use of essential oils of chiropterochoric fruits as a useful approach to improve autoecological studies on fruit-eating bats and to promote tropical forest restoration through the attraction of frugivorous bats to degraded areas.

Photoluminescence of crystalline and disordered BTO : Mn powder: Experimental and theoretical modeling

Disordered and crystalline Mn-doped BaTiO3 (BTO:Mn) powders were synthesized by the polymeric precursor method. After heat treatment, the nature of visible photoluminescence (PL) at room temperature in amorphous BTO:Mn was discussed, considering results of experimental and theoretical studies. X-ray diffraction (XRD), PL, and UV-vis were used to characterize this material. Rietveld refinement of the BTO:Mn from XRD data was used to built two models, which represent the crystalline BTO:Mn (BTO:Mn,) and disordered BTO:Mn (BTO:Mn-d) structures. Theses models were analyzed by the periodic ab initio quantum mechanical calculations using the CRYSTAL98 package within the framework of density functional theory at the B3LYP level. The experimental and theoretical results indicated that PL is related with the degree of disorder in the BTO:Mn powders and also suggests the presence of localized states in the disordered structure. (c) 2006 Elsevier B.V. All rights reserved.