918 resultados para election observers
Resumo:
Purpose: To investigate the effect of incremental increases in intraocular straylight on threshold measurements made by three modern forms of perimetry: Standard Automated Perimetry (SAP) using Octopus (Dynamic, G-Pattern), Pulsar Perimetry (PP) (TOP, 66 points) and the Moorfields Motion Displacement Test (MDT) (WEBS, 32 points).Methods: Four healthy young observers were recruited (mean age 26yrs [25yrs, 28yrs]), refractive correction [+2 D, -4.25D]). Five white opacity filters (WOF), each scattering light by different amounts were used to create incremental increases in intraocular straylight (IS). Resultant IS values were measured with each WOF and at baseline (no WOF) for each subject using a C-Quant Straylight Meter (Oculus, Wetzlar, Germany). A 25 yr old has an IS value of ~0.85 log(s). An increase of 40% in IS to 1.2log(s) corresponds to the physiological value of a 70yr old. Each WOFs created an increase in IS between 10-150% from baseline, ranging from effects similar to normal aging to those found with considerable cataract. Each subject underwent 6 test sessions over a 2-week period; each session consisted of the 3 perimetric tests using one of the five WOFs and baseline (both instrument and filter were randomised).Results: The reduction in sensitivity from baseline was calculated. A two-way ANOVA on mean change in threshold (where subjects were treated as rows in the block and each increment in fog filters was treated as column) was used to examine the effect of incremental increases in straylight. Both SAP (p<0.001) and Pulsar (p<0.001) were significantly affected by increases in straylight. The MDT (p=0.35) remained comparatively robust to increases in straylight.Conclusions: The Moorfields MDT measurement of threshold is robust to effects of additional straylight as compared to SAP and PP.
Resumo:
This paper deals with fault detection and isolation problems for nonlinear dynamic systems. Both problems are stated as constraint satisfaction problems (CSP) and solved using consistency techniques. The main contribution is the isolation method based on consistency techniques and uncertainty space refining of interval parameters. The major advantage of this method is that the isolation speed is fast even taking into account uncertainty in parameters, measurements, and model errors. Interval calculations bring independence from the assumption of monotony considered by several approaches for fault isolation which are based on observers. An application to a well known alcoholic fermentation process model is presented
Resumo:
The speed of fault isolation is crucial for the design and reconfiguration of fault tolerant control (FTC). In this paper the fault isolation problem is stated as a constraint satisfaction problem (CSP) and solved using constraint propagation techniques. The proposed method is based on constraint satisfaction techniques and uncertainty space refining of interval parameters. In comparison with other approaches based on adaptive observers, the major advantage of the presented method is that the isolation speed is fast even taking into account uncertainty in parameters, measurements and model errors and without the monotonicity assumption. In order to illustrate the proposed approach, a case study of a nonlinear dynamic system is presented
Resumo:
We carried out a retrospective review of 155 patients with lumbar spinal stenosis who had been treated surgically and followed up regularly: 77 were evaluated at a mean of 6.5 years (5 to 8) after surgery by two independent observers. The outcome was assessed using the scoring system of Roland and Morris, and the rating system of Prolo, Oklund and Butcher. Instability was determined according to the criteria described by White and Panjabi. A significant decrease in low back pain and disability was seen. An excellent or good outcome was noted in 79% of patients; 9% showed secondary radiological instability. Surgical decompression is a safe and efficient procedure. In the absence of preoperative radiological evidence of instability, fusion is not required.
Resumo:
PURPOSE: Cardiovascular magnetic resonance (CMR) has become a robust and important diagnostic imaging modality in cardiovascular medicine. However,insufficient image quality may compromise its diagnostic accuracy. No standardized criteria are available to assess the quality of CMR studies. We aimed todescribe and validate standardized criteria to evaluate the quality of CMR studies including: a) cine steady-state free precession, b) delayed gadoliniumenhancement, and c) adenosine stress first-pass perfusion. These criteria will serve for the assessment of the image quality in the setting of the Euro-CMR registry.METHOD AND MATERIALS: First, a total of 45 quality criteria were defined (35 qualitative criteria with a score from 0-3, and 10 quantitative criteria). Thequalitative score ranged from 0 to 105. The lower the qualitative score, the better the quality. The quantitative criteria were based on the absolute signal intensity (delayed enhancement) and on the signal increase (perfusion) of the anterior/posterior left ventricular wall after gadolinium injection. These criteria were then applied in 30 patients scanned with a 1.5T system and in 15 patients scanned with a 3.0T system. The examinations were jointly interpreted by 3 CMR experts and 1 study nurse. In these 45 patients the correlation between the results of the quality assessment obtained by the different readers was calculated.RESULTS: On the 1.5T machine, the mean quality score was 3.5. The mean difference between each pair of observers was 0.2 (5.7%) with a mean standarddeviation of 1.4. On the 3.0T machine, the mean quality score was 4.4. The mean difference between each pair of onservers was 0.3 (6.4%) with a meanstandard deviation of 1.6. The quantitative quality assessments between observers were well correlated for the 1.5T machine: R was between 0.78 and 0.99 (pCONCLUSION: The described criteria for the assessment of CMR image quality are robust and have a low inter-observer variability, especially on 1.5T systems.CLINICAL RELEVANCE/APPLICATION: These criteria will allow the standardization of CMR examinations. They will help to improve the overall quality ofexaminations and the comparison between clinical studies.
Resumo:
Introduction: Measures of the degree of lumbar spinal stenosis (LSS) such as antero-posterior diameter of the canal, and dural sac cross sectional area vary, and do not correlate with symptoms or results of surgery. We created a grading system, comprised of seven categories, based on the morphology of the dural sac and its contents as seen on T2 axial images. The categories take into account the ratio of rootlet/ CSF content. Grade A indicates no significant compression, grade D is equivalent to a total myelograhic block. We compared this classification with commonly used criteria of severity of stenosis. Methods: Fifty T2 axial MRI images taken at disc level from 27 symptomatic LSS patients undergoing decompressive surgery were classified twice by two radiologists and three spinal surgeons working at different institutions and countries. Dural sac cross-sectional surface area and AP diameter of the canal were measured both at disc and pedicle level from DICOM images using OsiriX software. Intraand inter-observer reliability were assessed using Cohen's, Fleiss' kappa statistics, and t test. Results: For the morphological grading the average intra-and inter observer kappas were 0.76 and 0.69+, respectively, for physicians working in the study originating country. Combining all observers the kappa values were 0.57 ± 0.19. and 0.44 ± 0.19, respectively. AP diameter and dural sac cross-sectional area measurements showed no statistically significant differences between observers. No correlation between morphological grading and AP diameter or dural sac crosssectional areawas observed in 13 (26%) and 8 cases (16%), respectively. Discussion: The proposed morphological grading relies on the identification of the dural sac and CSF better seen on full MRI series. This was not available to the external observers, which might explain the lower overall kappa values. Since no specific measurement tools are needed the grading suits everyday clinical practice and favours communication of degree of stenosis between practising physicians. The absence of a strict correlation with the dural sac surface suggests that measuring the surface alone might be insufficient in defining LSS as it is essentially a mismatch between the spinal canal and its contents. This grading is now adopted in our unit and further studies concentrating on relation between morphology, clinical symptoms and surgical results are underway.
Resumo:
INTRODUCTION: Lumbar spinal stenosis (LSS) treatment is based primarily on the clinical criteria providing that imaging confirms radiological stenosis. The radiological measurement more commonly used is the dural sac cross-sectional area (DSCA). It has been recently shown that grading stenosis based on the morphology of the dural sac as seen on axial T2 MRI images, better reflects severity of stenosis than DSCA and is of prognostic value. This radiological prospective study investigates the variability of surface measurements and morphological grading of stenosis for varying degrees of angulation of the T2 axial images relative to the disc space as observed in clinical practice. MATERIALS AND METHODS: Lumbar spine TSE T2 three-dimensional (3D) MRI sequences were obtained from 32 consecutive patients presenting with either suspected spinal stenosis or low back pain. Axial reconstructions using the OsiriX software at 0°, 10°, 20° and 30° relative to the disc space orientation were obtained for a total of 97 levels. For each level, DSCA was digitally measured and stenosis was graded according to the 4-point (A-D) morphological grading by two observers. RESULTS: A good interobserver agreement was found in grade evaluation of stenosis (k = 0.71). DSCA varied significantly as the slice orientation increased from 0° to +10°, +20° and +30° at each level examined (P < 0.0001) (-15 to +32% at 10°, -24 to +143% at 20° and -29 to +231% at 30° of slice orientation). Stenosis definition based on the surface measurements changed in 39 out of the 97 levels studied, whereas the morphology grade was modified only in two levels (P < 0.01). DISCUSSION: The need to obtain continuous slices using the classical 2D MRI acquisition technique entails often at least a 10° slice inclination relative to one of the studied discs. Even at this low angulation, we found a significantly statistical difference between surface changes and morphological grading change. In clinical practice, given the above findings, it might therefore not be necessary to align the axial cuts to each individual disc level which could be more time-consuming than obtaining a single series of axial cuts perpendicular to the middle of the lumbar spine or to the most stenotic level. In conclusion, morphological grading seems to offer an alternative means of assessing severity of spinal stenosis that is little affected by image acquisition technique.
Resumo:
This paper explores the existence of negative peer-group pressures derived from the concentration of foreigners in French lower secondary schools. Using different dependent variables (number of years spent in lower secondary education, grades in 4th ‘and 3rd year and track election in upper secondary schooling) the analyses indicate that the much disputed existence of significant and negative effects of the concentration of foreign students in schools depends on the method used for the estimation. If we assume that the concentration of foreigners is a random and exogenous process, then the multivariate analyses confirm negative interactions. If, on the contrary, we question the assumption that this contextual information is not end the result of prior sorting mechanisms of individuals across social spaces, the concentration of foreigners has no statistical impact on attainment.
Resumo:
With each passing election, U.S. political campaigns have renewed their efforts in courting the “Latino vote,” yet the Latino population is not a culturally homogenous voting bloc. This study examined how cultural identifications and acculturation attitudes in U.S. born Mexican Americans interacted with socioeconomic status (SES) to predict political orientation. Individuals who held stronger Mexican identity and supported biculturalism as an acculturation strategy had a more liberal orientation, while belonging to a higher SES group and holding stronger assimilation attitudes predicted a less liberal orientation. Mexican cultural identification interacted with SES such that those who held a weaker Mexican identity, but came from a higher social class were less liberal and more moderate in their political orientation. Weak Mexican identification and higher SES also predicted weaker endorsement of bicultural acculturation attitudes, which in turn, mediated the differences in political orientation. The acceptance of one’s ethnic identity and endorsement of bicultural attitudes predicted a more liberal political orientation. In light of these findings, political candidates should be cautious in how they pander to Latino constituents—referencing the groups’ ethnic culture or customs may distance constituents who are not strongly identified with their ethnic culture.
Resumo:
RESUME en français Centrée sur le grand nymphée de Leptis Magna la recherche met en évidence l'évolution et la signification de ce monument des eaux dans l'une des plus importantes cités africaines de l'époque romaine en mettant en lumière trois thèmes principaux. L'étude historiographique permet tout d'abord d'appréhender, à l'aide des témoignages littéraires des siècles derniers et d'une abondante documentation d'archive, l'histoire de l'édifice de son ensablement à sa remise au jour, puis de suivre les différentes étapes de son dégagement et de sa restauration, mettant ainsi en relief la perception des divers observateurs à l'encontre du monument. L'étude urbanistique permet ensuite de dégager la signification de l'édifice dans la cité par rapport aux autres monuments du secteur aux différentes périodes de son histoire, ainsi que de reconstituer l'approvisionnement en eau de Leptis Magna. Enfin, l'étude architecturale s'intéresse à l'analyse détaillée des structures, permettant la mise en évidence de la conception initiale, du fonctionnement et des transformations du nymphée. Cette dernière approche, qui s'accompagne d'un catalogue circonstancié des éléments du décor, fait intervenir des considérations sur les techniques de constructions, le traitement des blocs d'ornementation et, d'une manière plus générale, sur ('économie du chantier. Cette recherche permet non seulement de reconstituer l'aspect, le rôle et l'histoire du monument et de le replacer dans la série des nymphées romains, mais aussi de percevoir son impact sur les habitants du lieu aux différents moments de son histoire, cherchant ainsi à rejoindre par l'archéologie des considérations sociologiques. THE GREAT SEVERAN NYMPHAEUM OF LEPTIS MAGNA: HISTORIOGRAPHICAL, URBANISTIC AND ARCHITECTURAL STUDY RESUME en anglais Based on the great nymphaeum of Leptis Magna, the research considers the development and significance of this water monument in one of the most important African cities of the Roman period, through three principal aspects. The historiographical study aboards the subject through literary testimony from the last centuries and an abundance of documentary archives, the history of the edifice from its burial to its reconstruction, studying the different stages of its unearthing and its restoration, thus pinpointing perspectives from various observers of the monument. The urban study divulges the significance of the edifice in the city, in comparison with other monuments in the region over different periods of its history, as well as reconstituting Leptis Magna's water supply. Finally, the architectural study undertakes a detailed analysis of the structures, which highlights the conception and the transformations of the nymphaeum, as well as its hydraulic functions. This architectural approach, which is accompanied by a detailed catalogue of the decorative elements, juxtaposes the technical considerations of construction with the ornamental treatment of the marble blocks, accounting for the economical aspects of the site of the nymphaeum. This research proposes not only a consideration of the appearance, the role and the history of the monument and situates it within the series of Roman nymphaea, but also the perception of its impact on the local inhabitants at different moments in its history, looking for accomplish by archaeology some sociological considerations.
Resumo:
This study aimed to derive an index quantifying the state of alteration of cadavers by quantifying the presence of gas in the body using postmortem multidetector computed tomography (MDCT) imaging, and to validate the index by defining its sensitivity and specificity. The RA (radiological alteration)-index was derived from postmortem MDCT data from 118 nontraumatically deceased people. To validate the index, 100 additional scanned bodies (50 % traumatically deceased) were retrospectively examined by two independent observers. Presence of gas at 82 sites was assessed by a radiologist, whereas a forensic pathologist only investigated the seven sites used for the RA-index. The RA-index was highly correlated to the overall presence of gas in all 82 sites (R(2) = 0.98 in the derivation set and 0.85 in the validation set). Semiquantitative evaluation of gas presence in each site showed moderate reliability (Cohen's kappa range, 0.41-0.78); nevertheless, the overall RA-index was very reliable (ICC(2,1) = 0.95; 95 % CI 0.92-0.96). Examiner using the RA-index detected heart cavities full of gas with a sensitivity of 100 % (95 % CI 51.7-100) and a specificity of 98.8 % (92.6-99.9). We conclude that determining the presence of gas at seven sites is a valid means to measure the distribution of gas due to cadaveric alteration in the entire body. The RA-index is rapid, easy-to-use, and reliable for nonexperienced users, and it is a valid method to suspect the normal presence of gas from cadaveric alteration. MDCT can be used to screen for gas embolism and to give indications for gas composition analysis (gas chromatography).
Resumo:
AIM: Contribution of 3-phase 18F-fluorocholine PET/CT in suspected prostate cancer recurrence at early rise of PSA. PATIENTS, METHODS: Retrospective analysis was performed in 47 patients after initial treatment with radiotherapy (n=30) or surgery (n=17). Following CT, 10 minutes list-mode PET acquisition was done over the prostate bed after injection of 300 MBq of 18F-fluorocholine. Three timeframes of 3 minutes each were reconstructed for analysis. All patients underwent subsequent whole body PET/CT. Delayed pelvic PET/CT was obtained in 36 patients. PET/CT was interpreted visually by two observers and SUVmax determined for suspicious lesions. Biopsies were obtained from 13 patients. RESULTS: Biopsies confirmed the presence of cancer in 11 of 13 patients with positive PET for a total of 15 local recurrences in which average SUVmax increased during 14 minutes post injection and marginally decreased in delayed scanning. Conversely inguinal lymph nodes with mild to moderate metabolic activity on PET showed a clearly different pattern with decreasing SUVmax on dynamic images. Three-phase PET/CT contributed to the diagnostic assessment of 10 of 47 patients with biological evidence of recurrence of cancer. It notably allowed the discrimination of confounding blood pool or urinary activity from suspicious hyperactivities. PET/CT was positive in all patients with PSA>or=2 ng/ml (n=34) and in 4/13 patients presenting PSA values<2 ng/ml. CONCLUSION: 18F-fluorocholine 3-phase PET/CT showed a progressively increasing SUVmax in biopsy confirmed cancer lesions up to 14 minutes post injection while decreasing in inguinal lymph nodes interpreted as benign. Furthermore, it was very useful in differentiating local recurrences from confounding blood pool and urinary activity.
Resumo:
Ladam (Nicaise). Epistel van de stadt van Rodes (1522)
Resumo:
Notre travail de thèse vise à analyser, d'une part, les principales réformes du Parlement fédéral adoptées au cours du 20e siècle et, d'autre part, l'évolution du profil sociographique pour six cohortes d'élus fédéraux (1910, 1937, 1957, 1980, 2000 et 2010), sous l'angle de sa démocratisation et de sa professionnalisation. La thèse comprend trois axes de recherche principaux. Premièrement, nous nous penchons sur les deux réformes institutionnelles censées favoriser la démocratisation du recrutement parlementaire, à savoir l'adoption de la proportionnelle pour l'élection du Conseil national en 1918 et l'introduction du suffrage féminin à l'échelon fédéral en 1971. Nous abordons également les réformes du Parlement visant, depuis les années 1970, à sa revalorisation et à sa professionnalisation. Le deuxième axe porte sur la réalisation d'un portrait collectif des élus fédéraux pour la période 1910-1980, dans le but de vérifier l'impact des réformes des règles électorales (proportionnelle et suffrage féminin) sur le profil des députés et sénateurs. Enfin, dans le troisième axe, nous abordons les transformations du profil socio-professionnel des parlementaires pendant la période plus récente (1980-2010), en lien avec la professionnalisation accrue de l'Assemblée fédérale et les changements des rapports de force partisans. Nos résultats permettent de mettre en évidence plusieurs éléments de continuité (prédominance de la catégories des indépendants, notamment des avocats, des chefs d'entreprise et des agriculteurs, et sous-représentation des salariés du secteur public ; fort ancrage local), ainsi que certains facteurs de rupture (présence accrue des femmes, moindre importance de la carrière militaire). D'autres changements dans le profil sont liés au processus récent de professionnalisation, contesté et inachevé, qui a favorisé néanmoins l'émergence de nouveaux profils sociologiques d'élus, en termes de formation, de profession (apparition du groupe des parlementaires professionnels) et de cumul des mandats économiques et politiques, avec cependant de fortes variations entre les partis et entre les deux Chambres. - Our PhD thesis aims at analysing, on the one hand, the main reforms of the Federal Parliament adopted during the 20th century and, on the other hand, the evolution of sociographical profile for six cohorts of Swiss MPs (1910, 1937, 1957, 1980, 2000 and 2010) in terms of their democratization and professionalization. Our research is composed of three main parts. Firstly, we analyse two institutional reforms which intended to promote the democratization of parliamentary recruitment, namely the adoption of proportional representation (PR) in 1918 for the election of the National Council and the introduction of women's suffrage at the federal level in 1971. We also deal with parliamentary reforms that, since the 1970s, have aimed at reasserting the political status of the Federal Assembly and at professionalizing its members. Secondly, we carry out a collective biography of Swiss MPs during the period 1910-1980, in order to verify the impact of electoral reforms (PR and women's suffrage) on the profiles of deputies and senators. Finally, we discuss the transformation of the MPs' socio-_professional profiles during the recent period (1980-2010) in connection with the increased professionalization of the Federal Assembly and the changes of the power relations within the Parliament. Our results allow us to highlight several elements of continuity (the predominance of self-employed persons, especially lawyers, business managers and farmers, and the underrepresentation of public employees; stronger background in local politics), as well as some factors of discontinuity (increased presence of women and lesser importance of the military career). Other changes of the parliamentarians' profile are related to the recent process of professionalization. Although contested and unfinished, it has promoted new sociological profiles in terms of educational background, profession (growth of the professional parliamentarians) and number of political and economic mandates held simultaneously, however with important variations between parties and between Lower and Upper House.
Resumo:
A Election Markup Language (EML) é uma linguagem de comunicação para ser utilizada entre os diversos subsistemas que constituem o Sistema de Votação Electrónica (SVE). Esta dissertação tem como objectivo contribuir para o estudo do Voto Electrónico em Portugal, analisando a lei do processo eleitoral e utilizando as recomendações do Conselho da Europa sobre a adopção do EML, propõe-se apresentar uma arquitectura de SVE que possa ser utilizado para as eleições e referendos