Avaliação da transmitância direta de resinas compostas por meio de espectrofotometria de UV-visível

Este estudo avaliou as porcentagens de Transmitância direta (Td) das resinas compostas microhíbridas Charisma F, Solitaire II (Heraeus Kulzer ), Intens e Tetric Ceram (Ivoclar Vivadent) e nanoparticuladas Esthet-X (Dentsply De trey) e Filtek Supreme (3M Espe) nas cores Vita A3 (Dentina) e translúcido (Esmalte), ou seus correspondentes. Foram confeccionados três corpos-de-prova para cada material e cor, de formato quadrangular com 12x12 mm de lado e espessura de 1 mm. Após fotoativação, foram realizadas três leituras por corpo-de-prova em espectrofotômetro de UV-visível HP 8453 (Hewlett-Packard), com temperatura e umidade controladas (22±2°C/50±5%). Os ângulos de incidência e leitura em 0° / 0° foram utilizados para os comprimentos de onda de 400 a 700 nm. Os espectros obtidos foram analisados quanto ao percentual médio de Td para todo o espectro, em intervalos de 20 nm, e nos comprimentos de onda de 400, 560 e 700 nm. Através de ANOVA e teste de Tukey (p=0,01) encontrou-se que a resina composta Charisma obteve as maiores porcentagens de Td em todos os espectros, exceto para a cor Esmalte em 700 nm, que ficou abaixo da resina composta Esthet-X cor Esmalte. O teste t-Student demonstrou serem significativamente maiores os percentuais de Td para os espectros das cores Translúcido, exceto para as resinas compostas Supreme, em que não diferiram, e Charisma, com porcentagens de Td significativamente maiores para a cor Dentina. Por meio de teste não paramétrico de Friedman verificou-se que todas as resinas compostas estudadas demonstraram aumento significativo de Td com o aumento do comprimento de onda, com exceção da resina composta Solitaire, cores Dentina e Esmalte, que não demonstrou diferenças significativas nos comprimentos de onda de 560 e 700 nm.

Contribuição ao estudo do envelhecimento de ligantes asfálticos : influência da adição de polímeros e comportamento frente a radiação uv

A malha rodoviária brasileira apresenta-se, em sua maior extensão, em má condições de serventia. Uma das alternativas para se evitar deformações permanentes e trincamentos no pavimento é a adição, a quente e em reatores especiais, de polímeros ao asfalto. Esta prática já é realizada no Brasil há alguns anos, porém ainda não se tem um domínio do assunto, principalmente no caso da modificação de ligantes asfálticos brasileiros. O objetivo deste trabalho é avaliar a influência de algumas propriedades do polímero modificador no envelhecimento do ligante asfáltico modificado. Para tanto se realizou inicialmente um estudo sobre o mecanismo de envelhecimento de ligantes puros, inclusive frente a radiação ultravioleta do sol, e em seguida utilizou-se a mesma metodologia para avaliar o papel do polímero neste processo. Além disso, relacionou-se através de um projeto de experimentos a massa molar e teor de estireno do polímero SBS linear com suas propriedades clássicas, estabilidade, temperatura de transição vítrea e morfologia. Observou-se que a simulação de envelhecimento UV em laboratório, desenvolvida neste estudo, foi extremamente satisfatória. Os processos de foto-oxidação e termooxidação resultam em mecanismos diferentes de envelhecimento. A origem e composição química dos ligantes é de suma importância no mecanismo de envelhecimento UV destes. A massa molar e o teor de estireno do polímero modificador representam propriedades importantes para a estabilidade e durabilidade do ligante asfáltico modificado.

Fenólicos totais, polifenoloxidade e coloração em abacate 'Hass' submetido a radiação UV-C

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeitos da radiação uv, temperatura e vapor aquecido nos compósitos poliméricos: monitoramento, instabilidade estrutural e fratura

The application of composite materials and in particular the fiber-reinforced plastics (FRP) has gradually conquered space from the so called conventional materials. However, challenges have arisen when their application occurs in equipment and mechanical structures which will be exposed to harsh environmental conditions, especially when there is the influence of environmental degradation due to temperature, UV radiation and moisture in the mechanical performance of these structures, causing irreversible structural damage such as loss of dimensional stability, interfacial degradation, loss of mass, loss of structural properties and changes in the damage mechanism. In this context, the objective of this thesis is the development of a process for monitoring and modeling structural degradation, and the study of the physical and mechanical properties in FRP when in the presence of adverse environmental conditions (ageing). The mechanism of ageing is characterized by controlled environmental conditions of heated steam and ultraviolet radiation. For the research, it was necessary to develop three polymer composites. The first was a lamina of polyester resin reinforced with a short glass-E fiber mat (representing the layer exposed to ageing), and the other two were laminates, both of seven layers of reinforcement, one being made up only of short fibers of glass-E, and the other a hybrid type reinforced with fibers of glass-E/ fibers of curaua. It should be noted that the two laminates have the lamina of short glass-E fibers as a layer of the ageing process incidence. The specimens were removed from the composites mentioned and submitted to environmental ageing accelerated by an ageing chamber. To study the monitoring and modeling of degradation, the ageing cycles to which the lamina was exposed were: alternating cycles of UV radiation and heated steam, a cycle only of UV radiation and a cycle only of heated steam, for a period defined by norm. The laminates have already undergone only the alternating cycle of UV and heated steam. At the end of the exposure period the specimens were subjected to a structural stability assessment by means of the developed measurement of thickness variation technique (MTVT) and the measurement of mass variation technique (MMVT). Then they were subjected to the mechanical tests of uniaxial tension for the lamina and all the laminates, besides the bending test on three points for the laminates. This study was followed by characterization of the fracture and the surface degradation. Finally, a model was developed for the composites called Ageing Zone Diagram (AZD) for monitoring and predicting the tensile strength after the ageing processes. From the results it was observed that the process of degradation occurs Abstract Raimundo Nonato Barbosa Felipe xiv differently for each composite studied, although all were affected in certain way and that the most aggressive ageing process was that of UV radiation, and that the hybrid laminated fibers of glass-E/curaua composite was most affected in its mechanical properties

Ratios of UV, PAR and NIR components to global solar radiation measured at Botucatu site in Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Migration of Tinuvin P, a UV stabilizer, from PET bottles into fatty-food simulants

Tinuvin P migration from Polyethyleneterephthalate (PET) bottles was investigated using several fatty-food simulants such as olive oil, soybean oil, n-heptane and iso-octane, at exposure conditions of 2-10 days at 40 degrees C (total immersion). The stability of several UV stabilizers (BHT, Cyasorb UV 5411, Tinuvin P, Tinuvin 326 and Tinuvin 327) in n-heptane and iso-octane was also studied. After 10 days at 40 degrees C, losses of 6% and 20% in iso-octane and n-heptane respectively, were verified for Tinuvin P. Other UV stabilizers at the same experimental conditions showed higher losses (up to 30% for Tinuvin 327). These results confirm that, when carrying out specific migration studies, the stability of the substance of interest should be established in the food simulant to avoid underestimating the real migration behaviour. In order to quantify UV stabilizer migration, n-heptane and iso-octane solutions were concentrated and directly analysed by SIM mode GC-MS. For olive and soybean oils, Tinuvin P was isolated using size-exclusion chromatography and quantified by SIM mode GC-MS. Iso-octane proved to be a move suitable fatty-food simulant than n-heptane for the migration study of Tinuvin P from PET. Higher levels of Tinuvin P migrated to olive and soybean oils rather than to n-heptane. These results suggest that the MERCOSUL recommended official methods for specific migration studies should be revised since the migration levels using n-heptane as a fatty-food simulant could be underestimated when compared to edible oils. Copyright (C) 1999 John Wiley & Sons, Ltd.

Development and Validation of an UV-Derivative Spectrophotometric Method for Determination of Glimepiride in Tablets

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Rapid and Selective UV Spectrophotometric Method for the Analysis of Ceftazidime

A new UV spectrophotometric method was developed for quantitative evaluation of ceftazidime preparations. The UV detector was set at 255 nm. Beer's law is obeyed in the concentration range of 7.0-14.0 mu g/mL. The method was found to be selective, linear, accurate, and precise in the specified ranges. Intra- and interday variability for the method were <2% relative standard deviation. Common excipients used as additives in pharmaceutical preparations do not interfere with the proposed method. This method was successfully used for quantification of ceftazidime in pure form and in pharmaceutical preparations.

Development and Validation of a UV-Spectrophotometric Method for Determination of Flucloxacillin Sodium in Capsules

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparative study of analytical methods by direct and first-derivative UV spectrophotometry for evaluation of losartan potassium in capsules

O losartano potássico é um agente anti-hipertensivo não peptídico, que exerce sua ação por bloqueio específico dos receptores da angiotensina II. Este trabalho propôs a validação e aplicação de métodos analíticos orientados ao controle de qualidade de losartano potássico 50 mg na forma farmacêutica cápsula, utilizando a espectrofotometria direta e derivada de primeira ordem na região do UV. Baseado nas características espectrofotométricas de losartano potássico, um sinal a 205 nm do espectro de ordem zero e um sinal a 234 nm do espectro de primeira derivada foram adequados para a quantificação. Os resultados foram usados para comparar essas duas técnicas instrumentais. O coeficiente de correlação entre as respostas e as concentrações de losartano potássico na faixa de 3,0-7,0 mg L-1 e 6,0-14,0 mg L-1 para espectrofotometria direta e derivada de primeira ordem em solução aquosa, respectivamente, foi de (r) of 0,9999 para ambos os casos. Os métodos foram aplicados para quantificação de losartano potássico em cápsulas obtidas de farmácias de manipulação locais e demonstraram ser eficientes, fáceis de aplicar e de baixo custo. Além disso, não necessitam de reagentes poluentes e requerem equipamentos economicamente viáveis.

Performance characteristics of bioassay UV-spectrophotometry and high perfomance liquid chromatographic determination of gatifloxacin in tablets

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Validação de método analítico por espectrofotometria UV para sistema emulsionado lipídico contendo benznidazol

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Performance characteristics of high performance liquid chromatography, first order derivative UV spectrophotometry and bioassay for fluconazole determination in capsules

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morfologia em alta resolução espacial de estrelas de tipo Mira e R Corenae Borealis

Mira and R Coronae Borealis (R CrB) variable stars are evolved objects surrounded by circumstellar envelopes (CSE) composed of the ejected stellar material. We present a detailed high-spatial resolution morfological study of the CSE of three stars: IRC+10216, the closest and more studied Carbon-Rich Mira; o Ceti, the prototype of the Mira class; and RY Sagitarii (RY Sgr), the brightest R CrB variable of the south hemisphere. JHKL near-infrared adaptive optics images of IRC+10216 with high dynamic range and Vband images with high angular resolution and high depth, collected with the VLT/NACO and VLT/FORS1 instruments, were analyzed. NACO images of o Ceti were also analyzed. Interferometric observations of RY Sgr collected with the VLTI/MIDI instrument allowed us to explore its CSE innermost regions (»20 40 mas). The CSE of IRC+10216 exhibit, in near-infrared, clumps with more complex relative displacements than proposed in previous studies. In V-band, the majority of the non-concentric shells, located in the outer CSE layers, seem to be composed of thinner elongated shells. In a global view, the morphological connection between the shells and the bipolar core of the nebulae, located in the outer layers, together with the clumps, located in the innermost regions, has a difficult interpretation. In the CSE of o Ceti, preliminar results would be indicating the presence of possible clumps. In the innermost regions (.110 UA) of the CSE of RY Sgr, two clouds were detected in different epochs, embedded in a variable gaussian envelope. Based on a rigorous verification, the first cloud was located at »100 R¤ (or »30 AU) from the centre, toward the east-north-east direction (modulo 180o) and the second one was almost at a perpendicular direction, having aproximately 2£ the distance of the first cloud. This study introduces new constraints to the mass-loss history of these kind of variables and to the morphology of their innermost CSE regions

Semipreparative enantioseparation of methamidophos by HPLC-UV and preliminary in vitro study of butyrylcholinesterase inhibition

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)