Power indices applied to Portuguese Parliament

In this paper, we apply the following four power indices to the Portuguese Parliament: Shapley–Shubik index, Banzhaf index, Deegan–Packel index and Public Good Index. We also present the main notions related with simple games and discuss the features of each power index by means of their axiomatic characterizations.

Comparison between E-test and CLSI broth microdilution method for antifungal susceptibility testing of Candida albicans oral isolates

Thirty Candida albicans isolated from oral candidosis patients and 30 C. albicans isolated from control individuals were studied. In vitro susceptibility tests were performed for amphotericin B, fluconazole, 5-flucytosine and itraconazole through the Clinical and Laboratorial Standards Institute (CLSI) reference method and E test system. The results obtained were analyzed and compared. MIC values were similar for the strains isolated from oral candidosis patients and control individuals. The agreement rate for the two methods was 66.67% for amphotericin B, 53.33% for fluconazole, 65% for flucytosine and 45% for itraconazole. According to our data, E test method could be an alternative to trial routine susceptibility testing due to its simplicity. However, it can not be considered a substitute for the CLSI reference method.

Coalition of distributed generation units to Virtual Power Players - a game theory approach

Smart Grids (SGs) have emerged as the new paradigm for power system operation and management, being designed to include large amounts of distributed energy resources. This new paradigm requires new Energy Resource Management (ERM) methodologies considering different operation strategies and the existence of new management players such as several types of aggregators. This paper proposes a methodology to facilitate the coalition between distributed generation units originating Virtual Power Players (VPP) considering a game theory approach. The proposed approach consists in the analysis of the classifications that were attributed by each VPP to the distributed generation units, as well as in the analysis of the previous established contracts by each player. The proposed classification model is based in fourteen parameters including technical, economical and behavioural ones. Depending of the VPP strategies, size and goals, each parameter has different importance. VPP can also manage other type of energy resources, like storage units, electric vehicles, demand response programs or even parts of the MV and LV distribution network. A case study with twelve VPPs with different characteristics and one hundred and fifty real distributed generation units is included in the paper.

Multi-criteria optimisation approach to increase the delivered power in radial distribution networks

This study proposes a new methodology to increase the power delivered to any load point in a radial distribution network, through the identification of new investments in order to improve the repair time. This research work is innovative and consists in proposing a full optimisation model based on mixed-integer non-linear programming considering the Pareto front technique. The goal is to achieve a reduction in repair times of the distribution networks components, while minimising the costs of that reduction as well as non-supplied energy costs. The optimisation model considers the distribution network technical constraints, the substation transformer taps, and it is able to choose the capacitor banks size. A case study based on a 33-bus distribution network is presented in order to illustrate in detail the application of the proposed methodology.

Metodologia BIM, aplicada à preparação, controlo e gestão de obra

O âmbito deste trabalho envolve o teste do modelo BIM numa obra em construção pela Mota-Engil – Engenharia, na extração experimental de peças desenhadas de preparação e apoio à execução de obra. No capítulo 1 deste relatório são definidos o âmbito e os objetivos deste trabalho, é feito um enquadramento histórico do tema e abordados conceitos e atividades da preparação de obra, na sua forma tradicional. O estado do conhecimento da preparação de obras e mais em concreto da tecnologia BIM a nível nacional e internacional é abordado no capítulo 2. Nesse sentido procura-se definir os conceitos principais inerentes a esta nova metodologia, que passa por identificar e caraterizar a tecnologia envolvida e o seu nível de desenvolvimento. Com suporte em casos práticos de preparação de obra na sua forma tradicional, identificados e desenvolvidos no capítulo 3, foi compilado um processo tipo de peças desenhadas de suporte identificadas e caracterizadas no capítulo 4, frequentes e comuns à execução de diversos tipos de obras de edifícios. Assente na compilação baseada em casos práticos e no estudo do projeto de execução da empreitada que sustenta o presente trabalho, com base no qual o modelo BIM foi concebido, identificou-se um conjunto de peças desenhadas de preparação e apoio à execução dos trabalhos, em 2D, a extrair do modelo. No capítulo 5, é feita uma descrição do modo como foi estudado o projeto da obra, com evidência para os fatores mais relevantes, especificando os desenhos a extrair. Suportada pelo programa de modelação ArchiCAD, a extração do conjunto de desenhos identificados anteriormente foi conseguida com recurso às funcionalidades disponíveis no software, que permite a criação de desenhos 2D atualizáveis ou não automaticamente a partir do modelo. Qualquer alteração introduzida no modelo virtual é automaticamente atualizada nos desenhos bidimensionais, caso o utilizador assim o pretenda. Ao longo desse trabalho foram detetados e analisados os condicionalismos inerentes ao processo de extração, referidos no capítulo 6, para estabelecimento de regras de modelação padrão a adotar em futuras empreitadas, que possam simplificar a obtenção dos elementos desenhados de preparação necessários à sua execução. No ponto 6.3 são identificadas melhorias a introduzir no modelo. Em conclusão no capítulo 7 são abordadas especificidades do setor da construção que sustentam e evidenciam cada vez mais a necessidade de utilizar as novas tecnologias com vista à adoção de práticas e ferramentas padrão de apoio à execução de obras. Sendo a tecnologia BIM, transversal a todo o setor, a sua utilização com regras padrão na conceção dos modelos e na extração de dados, potencia a otimização dos custos, do tempo, dos recursos e da qualidade final de um empreendimento, ao longo de todo o seu ciclo de vida, para além de apoiar com elevada fiabilidade as tomadas de decisão ao longo desse período. A tecnologia BIM, possibilita a antevisão do edifício a construir com um elevado grau de pormenor, com todas as vantagens que daí advêm.

Fate Hazardous elements in soils surrounding a coal-fired power plant complex

Proceedings of the 13th International UFZ-Deltares Conference on Sustainable Use and Management of Soil, Sediment and Water Resources - 9–12 June 2015 • Copenhagen, Denmark

In vitro susceptibility testing of dermatophytes isolated in Goiania, Brazil, against five antifungal agents by broth microdilution method

The antifungal activities of fluconazole, itraconazole, ketoconazole, terbinafine and griseofulvin were tested by broth microdilution technique, against 60 dermatophytes isolated from nail or skin specimens from Goiania city patients, Brazil. In this study, the microtiter plates were incubated at 28 ºC allowing a reading of the minimal inhibitory concentration (MIC) after four days of incubation for Trichophyton mentagrophytes and five days for T. rubrum and Microsporum canis. Most of the dermatophytes had uniform patterns of susceptibility to the antifungal agents tested. Low MIC values as 0.03 µg/mL were found for 33.3%, 31.6% and 15% of isolates for itraconazole, ketoconazole and terbinafine, respectively.

Testing Nelder-Mead Based Repulsion Algorithms for Multiple Roots of Nonlinear Systems via a Two-Level Factorial Design of Experiments

This paper addresses the challenging task of computing multiple roots of a system of nonlinear equations. A repulsion algorithm that invokes the Nelder-Mead (N-M) local search method and uses a penalty-type merit function based on the error function, known as 'erf', is presented. In the N-M algorithm context, different strategies are proposed to enhance the quality of the solutions and improve the overall efficiency. The main goal of this paper is to use a two-level factorial design of experiments to analyze the statistical significance of the observed differences in selected performance criteria produced when testing different strategies in the N-M based repulsion algorithm. The main goal of this paper is to use a two-level factorial design of experiments to analyze the statistical significance of the observed differences in selected performance criteria produced when testing different strategies in the N-M based repulsion algorithm.

Quality-of-service aware routing for static and mobile IPv6-based low-power and lossy sensor networks using RPL

The Internet of Things (IoT) has emerged as a paradigm over the last few years as a result of the tight integration of the computing and the physical world. The requirement of remote sensing makes low-power wireless sensor networks one of the key enabling technologies of IoT. These networks encompass several challenges, especially in communication and networking, due to their inherent constraints of low-power features, deployment in harsh and lossy environments, and limited computing and storage resources. The IPv6 Routing Protocol for Low Power and Lossy Networks (RPL) [1] was proposed by the IETF ROLL (Routing Over Low-power Lossy links) working group and is currently adopted as an IETF standard in the RFC 6550 since March 2012. Although RPL greatly satisfied the requirements of low-power and lossy sensor networks, several issues remain open for improvement and specification, in particular with respect to Quality of Service (QoS) guarantees and support for mobility. In this paper, we focus mainly on the RPL routing protocol. We propose some enhancements to the standard specification in order to provide QoS guarantees for static as well as mobile LLNs. For this purpose, we propose OF-FL (Objective Function based on Fuzzy Logic), a new objective function that overcomes the limitations of the standardized objective functions that were designed for RPL by considering important link and node metrics, namely end-to-end delay, number of hops, ETX (Expected transmission count) and LQL (Link Quality Level). In addition, we present the design of Co-RPL, an extension to RPL based on the corona mechanism that supports mobility in order to overcome the problem of slow reactivity to frequent topology changes and thus providing a better quality of service mainly in dynamic networks application. Performance evaluation results show that both OF-FL and Co-RPL allow a great improvement when compared to the standard specification, mainly in terms of packet loss ratio and average network latency. 2015 Elsevier B.V. Al

Process engineering of liver cells for drug testing applications

Dissertação para obtenção do Grau de Doutor em Bioengenharia

Types and construction of power transformers

Transformers may be classified according to dielectric insulation material as follows: • Oil-filled transformers • Dry type transformers

PIASA: A power and interference aware resource management strategy for heterogeneous workloads in cloud data centers

Cloud data centers have been progressively adopted in different scenarios, as reflected in the execution of heterogeneous applications with diverse workloads and diverse quality of service (QoS) requirements. Virtual machine (VM) technology eases resource management in physical servers and helps cloud providers achieve goals such as optimization of energy consumption. However, the performance of an application running inside a VM is not guaranteed due to the interference among co-hosted workloads sharing the same physical resources. Moreover, the different types of co-hosted applications with diverse QoS requirements as well as the dynamic behavior of the cloud makes efficient provisioning of resources even more difficult and a challenging problem in cloud data centers. In this paper, we address the problem of resource allocation within a data center that runs different types of application workloads, particularly CPU- and network-intensive applications. To address these challenges, we propose an interference- and power-aware management mechanism that combines a performance deviation estimator and a scheduling algorithm to guide the resource allocation in virtualized environments. We conduct simulations by injecting synthetic workloads whose characteristics follow the last version of the Google Cloud tracelogs. The results indicate that our performance-enforcing strategy is able to fulfill contracted SLAs of real-world environments while reducing energy costs by as much as 21%.

HIV Voluntary Testing among Portuguese Women Attending Family Planning Clinics: Implications for HIV Prevention Education and Testing

Objectives: The aim of this article is to analyze the factors associated with HIV testing among 767 sexually active women. Methods: Participants were administered several self-report questionnaires that assessed behavioral and psychosocial measures. Results: Overall, 59.8% of the participants reported ever having tested for HIV. Results show that higher levels of education, being pregnant or having been pregnant, concern about AIDS, AIDS knowledge, self-efficacy in condom negotiation and perception of no risk in partner significantly predicted the likelihood of testing among women. Attending the mass was negatively associated with HIV testing. Conclusions: These findings provide information that can be used in the development of a focused gender sensitive HIV prevention program to increase HIV testing.

A Multiple Criteria Utility-based Approa h for the Unit Commitment with Wind Power and Pumped Storage Hydro

The integration of wind power in eletricity generation brings new challenges to unit commitment due to the random nature of wind speed. For this particular optimisation problem, wind uncertainty has been handled in practice by means of conservative stochastic scenario-based optimisation models, or through additional operating reserve settings. However, generation companies may have different attitudes towards operating costs, load curtailment, or waste of wind energy, when considering the risk caused by wind power variability. Therefore, alternative and possibly more adequate approaches should be explored. This work is divided in two main parts. Firstly we survey the main formulations presented in the literature for the integration of wind power in the unit commitment problem (UCP) and present an alternative model for the wind-thermal unit commitment. We make use of the utility theory concepts to develop a multi-criteria stochastic model. The objectives considered are the minimisation of costs, load curtailment and waste of wind energy. Those are represented by individual utility functions and aggregated in a single additive utility function. This last function is adequately linearised leading to a mixed-integer linear program (MILP) model that can be tackled by general-purpose solvers in order to find the most preferred solution. In the second part we discuss the integration of pumped-storage hydro (PSH) units in the UCP with large wind penetration. Those units can provide extra flexibility by using wind energy to pump and store water in the form of potential energy that can be generated after during peak load periods. PSH units are added to the first model, yielding a MILP model with wind-hydro-thermal coordination. Results showed that the proposed methodology is able to reflect the risk profiles of decision makers for both models. By including PSH units, the results are significantly improved.

Isolation and antifungal susceptibility testing of Trichosporon asahii in Ceará, Brazil

Trichosporon spp. are yeasts capable of causing invasive disease, which mainly affect immunocompromised patients. A clinical strain of T. asahii was isolated from the blood cultures of patients admitted to the General Hospital of Fortaleza. Susceptibility tests were conducted by disk diffusion and broth microdilution. The isolated strain of T. asahii was resistant to fluconazole. The patient used amphotericin B and caspofungin in order to facilitate the microbiological cure. It was the first isolation and identification of T. asahii in blood culture in Ceará, Brazil.