Curriculum design and higher order skills : challenging assumptions

This paper is based on an Australian Learning & Teaching Council (ALTC) funded evaluation in 13 universities across Australia and New Zealand of the use of Engineers Without Borders (EWB) projects in first-year engineering courses. All of the partner institutions have implemented this innovation differently and comparison of these implementations affords us the opportunity to assemble "a body of carefully gathered data that provides evidence of which approaches work for which students in which learning environments". This study used a mixed-methods data collection approach and a realist analysis. Data was collected by program logic analysis with course co-ordinators, observation of classes, focus groups with students, exit survey of students and interviews with staff as well as scrutiny of relevant course and curriculum documents. Course designers and co-ordinators gave us a range of reasons for using the projects, most of which alluded to their presumed capacity to deliver experience in and learning of higher order thinking skills in areas such as sustainability, ethics, teamwork and communication. For some students, however, the nature of the projects decreased their interest in issues such as ethical development, sustainability and how to work in teams. We also found that the projects provoked different responses from students depending on the nature of the courses in which they were embedded (general introduction, design, communication, or problem-solving courses) and their mode of delivery (lecture, workshop or online).

Dimensions of the venture creation process : amount, dynamics, and sequences of action in nascent entrepreneurship

This research examines the entrepreneurship phenomenon, and the question: Why are some venture attempts more successful than others? This question is not a new one. Prior research has answered this by describing those that engage in nascent entrepreneurship. Yet, this approach yielded little consensus and offers little comfort for those newly considering venture creation (Gartner, 1988). Rather, this research considers the process of venture creation, by focusing on the actions of nascent entrepreneurs. However, the venture creation process is complex (Liao, Welsch, & Tan, 2005), and multi-dimensional (Davidsson, 2004). The process can vary in the amount of action engaged by the entrepreneur; the temporal dynamics of how action is enacted (Lichtenstein, Carter, Dooley, and Gartner 2007); or the sequence in which actions are undertaken. And little is known about whether any, or all three, of these dimensions matter. Further, there exists scant general knowledge about how the venture creation process influences venture creation outcomes (Gartner & Shaver, 2011). Therefore, this research conducts a systematic study of what entrepreneurs do as they create a new venture. The primary goal is to develop general principles so that advice may be offered on how to ‘proceed’, rather than how to ‘be’. Three integrated empirical studies were conducted that separately focus on each of the interrelated dimensions. The basis for this was a randomly sampled, longitudinal panel, of nascent ventures. Upon recruitment these ventures were in the process of being created, but yet to be established as new businesses. The ventures were tracked one year latter to follow up on outcomes. Accordingly, this research makes the following original contributions to knowledge. First, the findings suggest that all three of the dimensions play an important role: action, dynamics, and sequence. This implies that future research should take a multi-dimensional view of the venture creation process. Failing to do so can only result in a limited understanding of a complex phenomenon. Second, action is the fundamental means through which venture creation is achieved. Simply put, more active venture creation efforts are more likely more successful. Further, action is the medium which allows resource endowments their effect upon venture outcomes. Third, the dynamics of how venture creation plays out over time is also influential. Here, a process with a high rate of action which increases in intensity will more likely achieve positive outcomes. Forth, sequence analysis, suggests that the order in which actions are taken will also drive outcomes. Although venture creation generally flows in sequence from discovery toward exploitation (Shane & Venkataraman, 2000; Eckhardt & Shane, 2003; Shane, 2003), processes that actually proceed in this way are less likely to be realized. Instead, processes which specifically intertwine discovery and exploitation action together in symbiosis more likely achieve better outcomes (Sarasvathy, 2001; Baker, Miner, & Eesley, 2003). Further, an optimal venture creation order exists somewhere between these sequential and symbiotic process archetypes. A process which starts out as symbiotic discovery and exploitation, but switches to focus exclusively on exploitation later on is most likely to achieve venture creation. These sequence findings are unique, and suggest future integration between opposing theories for order in venture creation.

Tackling the health burden from household air pollution (HAP) : development and implementation of new WHO Guidelines

Household air pollution (HAP), arising mainly from the combustion of solid and other polluting fuels, is responsible for a very substantial public health burden, most recently estimated as causing 3.5 million premature deaths in 2010. These patterns of household fuel use have also important negative impacts on safety, prospects for poverty reduction and the environment, including climate change. Building on previous air quality guidelines, the WHO is developing new guidelines focused on household fuel combustion, covering cooking, heating and lighting, and although global, the key focus is low and middle income countries reflecting the distribution of disease burden. As discussed in this paper, currently in development, the guidelines will include reviews of a wide range of evidence including fuel use in homes, emissions from stoves and lighting, household air pollution and exposure levels experienced by populations, health risks, impacts of interventions on HAP and exposure, and also key factors influencing sustainable and equitable adoption of improved stoves and cleaner fuels. GRADE, the standard method used for guidelines evidence review may not be well suited to the variety and nature of evidence required for this project, and a modified approach is being developed and tested. Work on the guidelines is being carried out in close collaboration with the UN Foundation Global Alliance on Clean cookstoves, allowing alignment with specific tools including recently developed international voluntary standards for stoves, and the development of country action plans. Following publication, WHO plans to work closely with a number of countries to learn from implementation efforts, in order to further strengthen support and guidance. A case study on the situation and policy actions to date in Bhutan provide an illustration of the challenges and opportunities involved, and the timely importance of the new guidelines and associated research, evaluation and policy development agendas.

Analysis of higher-order aberrations in a large clinical population

Purpose: To use a large wavefront database of a clinical population to investigate relationships between refractions and higher order aberrations and between aberrations of right and left eyes. Methods: Third and fourth-order aberration coefficients and higher-order root-mean-squared aberrations (HO RMS), scaled to a pupil size of 4.5 mm diameter, were analysed in a population of about 24,000 patients from Carl Zeiss Vision's European wavefront database. Correlations were determined between the aberrations and the variables of refraction, near addition and cylinder. Results: Most aberration coefficients were significantly dependent upon these variables, but the proportions of aberrations that could be explained by these factors were less than 2% except for spherical aberration (12%), horizontal coma (9%) and HO RMS (7%). Near addition was the major contributor for horizontal coma (8.5% out of 9.5%) and spherical equivalent was the major contributor for spherical aberration (7.7% out of 11.6%). Interocular correlations were highly significant for all aberration coefficients, varying between 0.16 and 0.81. Anisometropia was a variable of significance for three aberrations (vertical coma, secondary astigmatism and tetrafoil), but little importance can be placed on this because of the small proportions of aberrations that can be explained by refraction (all less than 1.0 %). Conclusions: Most third- and fourth-order aberration coefficients were significantly dependent upon spherical equivalent, near addition and cylinder, but only horizontal coma (9%) and spherical aberration (12%) showed dependencies of greater than 2%. Interocular correlations were highly significant for all aberration coefficients, but anisometropia had little influence on aberration coefficients.

Composition and morphology of particle emissions from in-use aircraft during takeoff and landing

In order to provide realistic data for air pollution inventories and source apportionment at airports, the morphology and composition of ultrafine particles (UFP) in aircraft engine exhaust were measured and characterized. For this purpose, two independent measurement techniques were employed to collect emissions during normal takeoff and landing operations at Brisbane Airport, Australia. PM1 emissions in the airfield were collected on filters and analyzed using the particle-induced X-ray emission (PIXE) technique. Morphological and compositional analyses of individual ultrafine particles in aircraft plumes were performed on silicon nitride membrane grids using transmission electron microscopy (TEM) combined with energy-dispersive X-ray microanalysis (EDX). TEM results showed that the deposited particles were in the range of 5 to 100 nm in diameter, had semisolid spherical shapes and were dominant in the nucleation mode (18 – 20 nm). The EDX analysis showed the main elements in the nucleation particles were C, O, S and Cl. The PIXE analysis of the airfield samples was generally in agreement with the EDX in detecting S, Cl, K, Fe and Si in the particles. The results of this study provide important scientific information on the toxicity of aircraft exhaust and their impact on local air quality.

A catchment modelling approach integrating surface and groundwater processes, land use and distribution of nutrients : Elimbah Creek, southeast Queensland

As the world’s population is growing, so is the demand for agricultural products. However, natural nitrogen (N) fixation and phosphorus (P) availability cannot sustain the rising agricultural production, thus, the application of N and P fertilisers as additional nutrient sources is common. It is those anthropogenic activities that can contribute high amounts of organic and inorganic nutrients to both surface and groundwaters resulting in degradation of water quality and a possible reduction of aquatic life. In addition, runoff and sewage from urban and residential areas can contain high amounts of inorganic and organic nutrients which may also affect water quality. For example, blooms of the cyanobacterium Lyngbya majuscula along the coastline of southeast Queensland are an indicator of at least short term decreases of water quality. Although Australian catchments, including those with intensive forms of land use, show in general a low export of nutrients compared to North American and European catchments, certain land use practices may still have a detrimental effect on the coastal environment. Numerous studies are reported on nutrient cycling and associated processes on a catchment scale in the Northern Hemisphere. Comparable studies in Australia, in particular in subtropical regions are, however, limited and there is a paucity in the data, in particular for inorganic and organic forms of nitrogen and phosphorus; these nutrients are important limiting factors in surface waters to promote algal blooms. Therefore, the monitoring of N and P and understanding the sources and pathways of these nutrients within a catchment is important in coastal zone management. Although Australia is the driest continent, in subtropical regions such as southeast Queensland, rainfall patterns have a significant effect on runoff and thus the nutrient cycle at a catchment scale. Increasingly, these rainfall patterns are becoming variable. The monitoring of these climatic conditions and the hydrological response of agricultural catchments is therefore also important to reduce the anthropogenic effects on surface and groundwater quality. This study consists of an integrated hydrological–hydrochemical approach that assesses N and P in an environment with multiple land uses. The main aim is to determine the nutrient cycle within a representative coastal catchment in southeast Queensland, the Elimbah Creek catchment. In particular, the investigation confirms the influence associated with forestry and agriculture on N and P forms, sources, distribution and fate in the surface and groundwaters of this subtropical setting. In addition, the study determines whether N and P are subject to transport into the adjacent estuary and thus into the marine environment; also considered is the effect of local topography, soils and geology on N and P sources and distribution. The thesis is structured on four components individually reported. The first paper determines the controls of catchment settings and processes on stream water, riverbank sediment, and shallow groundwater N and P concentrations, in particular during the extended dry conditions that were encountered during the study. Temporal and spatial factors such as seasonal changes, soil character, land use and catchment morphology are considered as well as their effect on controls over distributions of N and P in surface waters and associated groundwater. A total number of 30 surface and 13 shallow groundwater sampling sites were established throughout the catchment to represent dominant soil types and the land use upstream of each sampling location. Sampling comprises five rounds and was conducted over one year between October 2008 and November 2009. Surface water and groundwater samples were analysed for all major dissolved inorganic forms of N and for total N. Phosphorus was determined in the form of dissolved reactive P (predominantly orthophosphate) and total P. In addition, extracts of stream bank sediments and soil grab samples were analysed for these N and P species. Findings show that major storm events, in particular after long periods of drought conditions, are the driving force of N cycling. This is expressed by higher inorganic N concentrations in the agricultural subcatchment compared to the forested subcatchment. Nitrate N is the dominant inorganic form of N in both the surface and groundwaters and values are significantly higher in the groundwaters. Concentrations in the surface water range from 0.03 to 0.34 mg N L..1; organic N concentrations are considerably higher (average range: 0.33 to 0.85 mg N L..1), in particular in the forested subcatchment. Average NO3-N in the groundwater has a range of 0.39 to 2.08 mg N L..1, and organic N averages between 0.07 and 0.3 mg N L..1. The stream bank sediments are dominated by organic N (range: 0.53 to 0.65 mg N L..1), and the dominant inorganic form of N is NH4-N with values ranging between 0.38 and 0.41 mg N L..1. Topography and soils, however, were not to have a significant effect on N and P concentrations in waters. Detectable phosphorus in the surface and groundwaters of the catchment is limited to several locations typically in the proximity of areas with intensive animal use; in soil and sediments, P is negligible. In the second paper, the stable isotopes of N (14N/15N) and H2O (16O/18O and 2H/H) in surface and groundwaters are used to identify sources of dissolved inorganic and organic N in these waters, and to determine their pathways within the catchment; specific emphasis is placed on the relation of forestry and agriculture. Forestry is predominantly concentrated in the northern subcatchment (Beerburrum Creek) while agriculture is mainly found in the southern subcatchment (Six Mile Creek). Results show that agriculture (horticulture, crops, grazing) is the main source of inorganic N in the surface waters of the agricultural subcatchment, and their isotopic signature shows a close link to evaporation processes that may occur during water storage in farm dams that are used for irrigation. Groundwaters are subject to denitrification processes that may result in reduced dissolved inorganic N concentrations. Soil organic matter delivers most of the inorganic N to the surface water in the forested subcatchment. Here, precipitation and subsequently runoff is the main source of the surface waters. Groundwater in this area is affected by agricultural processes. The findings also show that the catchment can attenuate the effects of anthropogenic land use on surface water quality. Riparian strips of natural remnant vegetation, commonly 50 to 100 m in width, act as buffer zones along the drainage lines in the catchment and remove inorganic N from the soil water before it enters the creek. These riparian buffer zones are common in most agricultural catchments of southeast Queensland and are indicated to reduce the impact of agriculture on stream water quality and subsequently on the estuary and marine environments. This reduction is expressed by a significant decrease in DIN concentrations from 1.6 mg N L..1 to 0.09 mg N L..1, and a decrease in the �15N signatures from upstream surface water locations downstream to the outlet of the agricultural subcatchment. Further testing is, however, necessary to confirm these processes. Most importantly, the amount of N that is transported to the adjacent estuary is shown to be negligible. The third and fourth components of the thesis use a hydrological catchment model approach to determine the water balance of the Elimbah Creek catchment. The model is then used to simulate the effects of land use on the water balance and nutrient loads of the study area. The tool that is used is the internationally widely applied Soil and Water Assessment Tool (SWAT). Knowledge about the water cycle of a catchment is imperative in nutrient studies as processes such as rainfall, surface runoff, soil infiltration and routing of water through the drainage system are the driving forces of the catchment nutrient cycle. Long-term information about discharge volumes of the creeks and rivers do, however, not exist for a number of agricultural catchments in southeast Queensland, and such information is necessary to calibrate and validate numerical models. Therefore, a two-step modelling approach was used to calibrate and validate parameters values from a near-by gauged reference catchment as starting values for the ungauged Elimbah Creek catchment. Transposing monthly calibrated and validated parameter values from the reference catchment to the ungauged catchment significantly improved model performance showing that the hydrological model of the catchment of interest is a strong predictor of the water water balance. The model efficiency coefficient EF shows that 94% of the simulated discharge matches the observed flow whereas only 54% of the observed streamflow was simulated by the SWAT model prior to using the validated values from the reference catchment. In addition, the hydrological model confirmed that total surface runoff contributes the majority of flow to the surface water in the catchment (65%). Only a small proportion of the water in the creek is contributed by total base-flow (35%). This finding supports the results of the stable isotopes 16O/18O and 2H/H, which show the main source of water in the creeks is either from local precipitation or irrigation waters delivered by surface runoff; a contribution from the groundwater (baseflow) to the creeks could not be identified using 16O/18O and 2H/H. In addition, the SWAT model calculated that around 68% of the rainfall occurring in the catchment is lost through evapotranspiration reflecting the prevailing long-term drought conditions that were observed prior and during the study. Stream discharge from the forested subcatchment was an order of magnitude lower than discharge from the agricultural Six Mile Creek subcatchment. A change in land use from forestry to agriculture did not significantly change the catchment water balance, however, nutrient loads increased considerably. Conversely, a simulated change from agriculture to forestry resulted in a significant decrease of nitrogen loads. The findings of the thesis and the approach used are shown to be of value to catchment water quality monitoring on a wider scale, in particular the implications of mixed land use on nutrient forms, distributions and concentrations. The study confirms that in the tropics and subtropics the water balance is affected by extended dry periods and seasonal rainfall with intensive storm events. In particular, the comprehensive data set of inorganic and organic N and P forms in the surface and groundwaters of this subtropical setting acquired during the one year sampling program may be used in similar catchment hydrological studies where these detailed information is missing. Also, the study concludes that riparian buffer zones along the catchment drainage system attenuate the transport of nitrogen from agricultural sources in the surface water. Concentrations of N decreased from upstream to downstream locations and were negligible at the outlet of the catchment.

Analysis and optimisation of the preferences of decision-makers in black-start group decision-making

As the first stage of power system restoration after a blackout, an optimal black-start scheme is very important for speeding up the whole restoration procedure. Up to now, much research work has been done on generating or selecting an optimal black-start scheme by a single round of decision-making. However, less attention has been paid for improving the final decision-making results through a multiple-round decision-making procedure. In the group decision-making environment, decision-making results evaluated by different black-start experts may differ significantly with each other. Thus, the consistency of black-start decision-making results could be deemed as an important indicator in assessing the black-start group decision-making results. Given this background, an intuitionistic fuzzy distance-based method is presented to analyse the consistency of black-start group decision-making results. Moreover, the weights of black-start indices as well as the weights of decision-making experts are modified in order to optimise the consistency of black-start group decision-making results. Finally, an actual example is served for demonstrating the proposed method.

Designing the information architecture of governmental one-stop portals : on the application and analysis of card sorting

The latest paradigm shift in government, termed Transformational Government, puts the citizen in the centre of attention. Including citizens in the design of online one-stop portals can help governmental organisations to become more customer focussed. This study describes the initial efforts of an Australian state government to develop an information architecture to structure the content of their future one-stop portal. Hereby, card sorting exercises have been conducted and analysed, utilising contemporary approaches found in academic and non-scientific literature. This paper describes the findings of the card sorting exercises in this particular case and discusses the suitability of the applied approaches in general. These are distinguished into non-statistical, statistical, and hybrid approaches. Thus, on the one hand, this paper contributes to academia by describing the application of different card sorting approaches and discussing their strengths and weaknesses. On the other hand, this paper contributes to practice by explaining the approach that has been taken by the authors’ research partner in order to develop a customer-focussed governmental one-stop portal. Thus, they provide decision support for practitioners with regard to different analysis methods that can be used to complement recent approaches in Transformational Government.

Numerical solutions for thin film flow down the outside and inside of a vertical cylinder

We consider a model for thin film flow down the outside and inside of a vertical cylinder. Our focus is to study the effect that the curvature of the cylinder has on the gravity-driven instability of the advancing contact line and to simulate the resulting fingering patterns that form due to this instability. The governing partial differential equation is fourth order with a nonlinear degenerate diffusion term that represents the stabilising effect of surface tension. We present numerical solutions obtained by implementing an efficient alternating direction implicit scheme. When compared to the problem of flow down a vertical plane, we find that increasing substrate curvature tends to increase the fingering instability for flow down the outside of the cylinder, whereas flow down the inside of the cylinder substrate curvature has the opposite effect. Further, we demonstrate the existence of nontrivial travelling wave solutions which describe fingering patterns that propagate down the inside of a cylinder at constant speed without changing form. These solutions are perfectly analogous to those found previously for thin film flow down an inclined plane.

Synthesis and characterisation of titanium sol-gels in varied gravity environments

Sol-gel synthesis in varied gravity is only a relatively new topic in the literature and further investigation is required to explore its full potential as a method to synthesise novel materials. Although trialled for systems such as silica, the specific application of varied gravity synthesis to other sol-gel systems such as titanium has not previously been undertaken. Current literature methods for the synthesis of sol-gel material in reduced gravity could not be applied to titanium sol-gel processing, thus a new strategy had to be developed in this study. To successfully conduct experiments in varied gravity a refined titanium sol-gel chemical precursor had to be developed which allowed the single solution precursor to remain un-reactive at temperatures up to 50oC and only begin to react when exposed to a pressure decrease from a vacuum. Due to the new nature of this precursor, a thorough characterisation of the reaction precursors was subsequently undertaken with the use of techniques such as Nuclear Magnetic Resonance, Infra-red and UV-Vis spectroscopy in order to achieve sufficient understanding of precursor chemistry and kinetic stability. This understanding was then used to propose gelation reaction mechanisms under varied gravity conditions. Two unique reactor systems were designed and built with the specific purpose to allow the effects of varied gravity (high, normal, reduced) during synthesis of titanium sol-gels to be studied. The first system was a centrifuge capable of providing high gravity environments of up to 70 g’s for extended periods, whilst applying a 100 mbar vacuum and a temperature of 40-50oC to the reaction chambers. The second system to be used in the QUT Microgravity Drop Tower Facility was also required to provide the same thermal and vacuum conditions used in the centrifuge, but had to operate autonomously during free fall. Through the use of post synthesis characterisation techniques such as Raman Spectroscopy, X-Ray diffraction (XRD) and N2 adsorption, it was found that increased gravity levels during synthesis, had the greatest effect on the final products. Samples produced in reduced and normal gravity appeared to form amorphous gels containing very small particles with moderate surface areas. Whereas crystalline anatase (TiO2), was found to form in samples synthesised above 5 g with significant increases in crystallinity, particle size and surface area observed when samples were produced at gravity levels up to 70 g. It is proposed that for samples produced in higher gravity, an increased concentration gradient of water is forms at the bottom of the reacting film due to forced convection. The particles formed in higher gravity diffuse downward towards this excess of water, which favours the condensation reaction of remaining sol gel precursors with the particles promoting increased particle growth. Due to the removal of downward convection in reduced gravity, particle growth due to condensation reaction processes are physically hindered hydrolysis reactions favoured instead. Another significant finding from this work was that anatase could be produced at relatively low temperatures of 40-50oC instead of the conventional method of calcination above 450oC solely through sol-gel synthesis at higher gravity levels. It is hoped that the outcomes of this research will lead to an increased understanding of the effects of gravity on chemical synthesis of titanium sol-gel, potentially leading to the development of improved products suitable for diverse applications such as semiconductor or catalyst materials as well as significantly reducing production and energy costs through manufacturing these materials at significantly lower temperatures.

Recognition and enforcement of foreign judgments : are the rules appropriate?

The recognition and enforcement of foreign judgments is an aspect of private international law, and concerns situations where a successful party to litigation seeks to rely on a judgment obtained in one court, in a court in another jurisdiction. The most common example where the recognition and enforcement of foreign judgments may arise is where a party who has obtained a favourable judgment in one state or country may seek to recognise and enforce the judgment in another state or country. This occurs because there is no sufficient asset in the state or country where the judgment was rendered to satisfy that judgment. As technological advancements in communications over vast geographical distances have improved exponentially in recent years, there has been an increase in cross-border transactions, as well as litigation arising from these transactions. As a result, the recognition and enforcement of foreign judgments is of increasing importance, since a party who has obtained a judgment in cross-border litigation may wish to recognise and enforce the judgment in another state or country, where the defendant’s assets may be located without having to re-litigate substantive issues that have already been resolved in another court. The purpose of the study is to examine whether the current state of laws for the recognition and enforcement of foreign judgments in Australia, the United States and the European Community are in line with modern-commercial needs. The study is conducted by weighing two competing objectives between the notion of finality of litigation, which encourages courts to recognise and enforce judgments foreign to them, on the one hand, and the adequacy of protection to safeguard the recognition and enforcement proceedings, so that there would be no injustice or unfairness if a foreign judgment is recognised and enforced, on the other. The findings of the study are as follows. In both Australia and the United States, there is a different approach concerning the recognition and enforcement of judgments rendered by courts interstate or in a foreign country. In order to maintain a single and integrated nation, there are constitutional and legislative requirements authorising courts to give conclusive effects to interstate judgments. In contrast, if the recognition and enforcement actions involve judgments rendered by a foreign country’s court, an Australian or a United States court will not recognise and enforce the foreign judgment unless the judgment has satisfied a number of requirements and does not fall under any of the exceptions to justify its non-recognition and non-enforcement. In the European Community, the Brussels I Regulation which governs the recognition and enforcement of judgments among European Union Member States has created a scheme, whereby there is only a minimal requirement that needs to be satisfied for the purposes of recognition and enforcement. Moreover, a judgment that is rendered by a Member State and based on any of the jurisdictional bases set forth in the Brussels I Regulation is entitled to be recognised and enforced in another Member State without further review of its underlying jurisdictional basis. However, there are concerns as to the adequacy of protection available under the Brussels I Regulation to safeguard the judgment-enforcing Member States, as well as those against whom recognition or enforcement is sought. This dissertation concludes by making two recommendations aimed at improving the means by which foreign judgments are recognised and enforced in the selected jurisdictions. The first is for the law in both Australia and the United States to undergo reform, including: adopting the real and substantial connection test as the new jurisdictional basis for the purposes of recognition and enforcement; liberalising the existing defences to safeguard the application of the real and substantial connection test; extending the application of the Foreign Judgments Act 1991 (Cth) in Australia to include at least its important trading partners; and implementing a federal statutory scheme in the United States to govern the recognition and enforcement of foreign judgments. The second recommendation is to introduce a convention on jurisdiction and the recognition and enforcement of foreign judgments. The convention will be a convention double, which provides uniform standards for the rules of jurisdiction a court in a contracting state must exercise when rendering a judgment and a set of provisions for the recognition and enforcement of resulting judgments.

Dreams and nightmares of alternative powers' futures

This chapter argues the importance of the role and nature of other powers to world order. The author suggests that, if the US are not prepared to take a lead in creating a rules-based legal order, they should and can do so – and it is in their interests to do so. America should be a natural leader in this process, taking part in a global dialogue just as they did in the transatlantic dialogue during the late eighteenth century.

Association study of the calcitonin gene-related polypeptide-alpha (CALCA) and the receptor activity modifying 1 (RAMP1) genes with migraine

Migraine is a common neurovascular brain disorder characterised by recurrent attacks of severe headache that may be accompanied by various neurological symptoms. Migraine is thought to result from activation of the trigeminovascular system followed by vasodilation of pain-producing intracranial blood vessels and activation of second-order sensory neurons in the trigeminal nucleus caudalis. Calcitonin gene-related peptide (CGRP) is a mediator of neurogenic inflammation and the most powerful vasodilating neuropeptide, and has been implicated in migraine pathophysiology. Consequently, genes involved in CGRP synthesis or CGRP receptor genes may play a role in migraine and/or increase susceptibility. This study investigates whether variants in the gene that encodes CGRP, calcitonin-related polypeptide alpha (CALCA) or in the gene that encodes a component of its receptor, receptor activity modifying protein 1 (RAMP1), are associated with migraine pathogenesis and susceptibility. The single nucleotide polymorphisms (SNPs) rs3781719 and rs145837941 in the CALCA gene, and rs3754701 and rs7590387 at the RAMP1 locus, were analysed in an Australian Caucasian population of migraineurs and matched controls. Although we find no significant association of any of the SNPs tested with migraine overall, we detected a nominally significant association (p = 0.031) of the RAMP1 rs3754701 variant in male migraine subjects, although this is non-significant after Bonferroni correction for multiple testing.

Prevalence and characteristics of Indigenous drink-driving convictions in Queensland, Australia

Alcohol-involved accidents are one of the leading contributors towards high injury rates among Indigenous Australians. However, there is limited information available to inform existing policies to change current rates. The study aims to provide information about the prevalence and the characteristics of such behaviour. Drink driving convictions from 2006-2010 were extracted from the Queensland Department of Justice and Attorney General database. Convictions were regrouped by gender, age, Accessibility/Remoteness Index of Australia classification (using court location) and sentence severity. A number of cross tabulations were carried out to identify relationships between variables. Standardised adjusted residuals were calculated for each cell in order to determine cell differences that contributed to the chi-square test results. Analysis revealed there were 9,323 convictions, of which the majority were for offences by males (77.5%). In relation to age, 52.6% of the convictions were of persons under 25 years of age. Age was significantly different across the five regions for males only (χ2=90.8, p<0.001), with a larger number of convictions in the ‘very remote’ region of persons over 40+ years of age. Increased remoteness was linked with high range BAC convictions for both males (χ2=168.4, p<0.001) and females (χ2=22.5, p=0.004). Monetary penalties were the primary sentence received for both males and females in all regions. The findings identify the Indigenous drink driving conviction rate to be 6 times that of the general Queensland rate and indicate that a multipronged approach is needed, with tailored strategies for remote offenders, young adults and offenders with alcohol misuse and dependency issues. Further attention is warranted in this area of road safety.