The Alberta Dilemma: Optimal Sharing of a Water Resource by an Agricultural and an Oil Sector

The purpose of this paper is to characterize the optimal time paths of production and water usage by an agricultural and an oil sector that have to share a limited water resource. We show that for any given water stock, if the oil stock is sufficiently large, it will become optimal to have a phase during which the agricultural sector is inactive. This may mean having an initial phase during which the two sectors are active, then a phase during which the water is reserved for the oil sector and the agricultural sector is inactive, followed by a phase during which both sectors are active again. The agricultural sector will always be active in the end as the oil stock is depleted and the demand for water from the oil sector decreases. In the case where agriculture is not constrained by the given natural inflow of water once there is no more oil, we show that oil extraction will always end with a phase during which oil production follows a pure Hotelling path, with the implicit price of oil net of extraction cost growing at the rate of interest. If the natural inflow of water does constitute a constraint for agriculture, then oil production never follows a pure Hotelling path, because its full marginal cost must always reflect not only the imputed rent on the finite oil stock, but also the positive opportunity cost of water.

On the Optimal Order of Natural Resource Use When the Capacity of the Inexhaustible Substitute is Limited.

Consider a general equilibrium framework where the marginal cost of extraction from several deposits of an exhaustible resource is constant in terms of an inexhaustible perfect substitute and differs between deposits. the instantaneous rate of production form the inexhaustible resource is subject to a capacity constraint.

L'Académie Julian et ses élèves canadiens : Paris, 1880-1900

Thèse dirigée sous la direction conjointe de Lise Lamarche et Jean Trudel.

A comparative study of the resilience of coal logistics chains in Australia, South Africa and Canada

Au cours des dernières années l'industrie du charbon a connu un essor important. L'importance du charbon dans l'économie mondiale provient d'une demande mondiale soutenue et de niveaux de production en hausse constante. De ce fait, le nombre élevé d'importateurs et d'exportateurs est à l'origine d'un système d'échange complexe où la compétition est féroce. En effet, un nombre grandissant de pays importateurs se partagent les sources d'approvisionnement tandis qu'un nombre limité de pays exportateurs s'efforcent de répondre à la demande tout en essayant de s'accaparer le plus de parts du marché mondial. L'objectif de cette recherche s'inscrit dans ce contexte en démontrant les bénéfices associés aux chaînes logistiques résilientes pour tout acteur de l'industrie soucieux de devancer la compétition. Une analyse de la logistique de l'industrie du charbon permet entre autres de se pencher sur les questions suivantes: Comment les infrastructures influencent-elles la résilience d'une chaîne logistique? Quels risques est-ce que les catastrophes naturelles présentent pour une chaîne logistique? Comment la gouvernance influence-t-elle la résilience d'une chaîne logistique? Une chaîne logistique représente le trajet effectué par un bien ou produit au cours de son cycle de vie, du point d'origine au point de consommation. Ceci étant dit, le meilleur moyen de régler les problèmes inhérents aux chaînes logistiques est de maintenir de hauts niveaux de résilience. Cette recherche évaluera donc la résilience de chaînes logistiques du charbon des industries australienne, sud-africaine et canadienne. Pour ce faire, trois variables seront étudiées: les infrastructures, les catastrophes naturelles et la gouvernance. La comparaison des trois cas à l'étude se fera par un nombre défini d'indicateurs (12 au total) pour chacune des variables étudiées. Les résultats de cette recherche démontrent que la résilience des trois cas à l'étude se ressemble. Cependant, certaines chaînes logistiques détiennent des avantages comparatifs qui améliorent grandement leur résilience et leur compétitivité. Plusieurs sujets de recherche pourraient être utilisés pour compléter cette recherche. L'analyse comparative pourrait être appliquée à d'autres chaînes logistiques pour vérifier la viabilité des résultats. Une analyse semblable pourrait également être entreprise pour le secteur en aval de la chaîne logistique. Finalement, une méthodologie basée sur des interviews pourrait ajouter un regard différent sur les questions abordées.

Social Policy Reforms in Turkey : Uses of Europe

Ce mémoire analyse trois réformes majeures de politique sociale en Turquie, en deux domaines: emploi et sécurité social. En utilisant l'approche "Usage de l'Europe", ce mémoire developpe une analyse empirique et apporte une explication théorique de ces changements qui ont été introduits au cours du processus d'adhésion de la Turquie à l'Union européenne. "Les usages de l'Europe" est une approche d'européanisation qui se concentre sur le rôle des acteurs domestiques, au sein des États membres et candidats, ainsi que de leur utilisation des ressources de l'Union européenne. Les études de cas utilisées dans cette thèse démontrent l'introduction de changements au niveau de l'État-providence; ainsi, l'approche originelle est suppléée par des concepts provenant de la littérature sur la politique partisane, les institutions formelles et l'héritage des politiques. Cette recherche utilise la méthode de l'analyse de processus pour suivre la réforme des règlements du travail par la voie de reconstitution des droits individuels des travailleurs et de l'Agence d'emploi en Turquie jusqu'en 2003, ainsi que la transformation du système de sécurité sociale en 2008. Ces trois réformes représentent des changements majeurs tant sur le plan institutionnel que politique en Turquie depuis 2001. Afin de comprendre "les usages de l'Europe" dans ces réformes politiques, l'analyse empirique questionne, si, quand et comment les acteurs turcs ont utilisé les ressources, les références et les développements politiques de l'Union européenne lors de ce processus dynamique de réforme. Les réformes du système de sécurité sociale, des règlements du travail, en plus de la reconstitution de l'Agence d'emploi étaient à l'ordre du jour en Turquie depuis les années 1990. La réforme des règlements du travail ont entraîné l'introduction des accommodements flexibles au travail et une révision de la Loi du travail permettant l'établissement d'une législation de la sécurité d'emploi. La reconstitution de l'Agence d'emploi visait à remplacer la vieille institution défunte par une institution moderne afin d'introduire des politiques d'activation. La réforme de sécurité sociale comprend les pensions de retraite, le système de santé ainsi que l'administration des institutions de sécurité sociale. Les principaux résultats révèlent que la provision des ressources de l'Union européenne en Turquie a augmenté à partir de la reconnaissance de sa candidature en 1999 et ce, jusqu'au lancement des négociations pour son adhésion en 2005; ce qui fut une occasion favorable pour les acteurs domestiques impliqués dans les processus de réformes. Cependant, à l'encontre de certaines attentes originelles de l'approche de "les usages de l'Europe", les résultats de cette recherche démontrent que le temps et le sort de "les usages de l'Europe" dépendent des intérêts des acteurs domestiques, ainsi de leurs stratégies tout au long de ce processus de réforme, plutôt que des phases du processus ou la quantité des ressources fournies par l'Union européenne.

Évaluation de la production morphosyntaxique chez un enfant québécois francophone porteur d'implant cochléaire.

Cette étude décrit le développement des structures morphosyntaxiques et morphophonologiques chez les enfants francophones âgés entre 3 et 6 ans. Ces données pourront contribuer à particulariser certaines difficultés morphosyntaxiques et morphophonologiques retrouvées chez l’enfant déficient auditif québécois porteur d’implant cochléaire. Le premier objectif de notre projet pilote vise à comparer les habiletés morphosyntaxiques et morphophonologiques au niveau expressif de l’enfant porteur d’IC à celles des enfants entendants de même âge auditif et chronologique. L’étude évalue spécifiquement l’accord intra-nominal en genre, et les processus de fusion, d’élision et de liaison. Nous prédisons qu’une entrée auditive inférieure à la norme aura un impact sur l’acquisition des règles morpho(phonolo)giques en français. Le deuxième objectif consiste à observer si la maîtrise de ces structures est liée à la maîtrise de la production phonémique chez l’enfant franco-québécois porteur d’IC. L’élaboration de deux tâches expérimentales et la passation de tâches évaluatives et expérimentales ont permis d’étudier les difficultés morphologiques et phonologiques de l’enfant porteur d'IC. Le groupe témoin a inclus 14 enfants à développement typique. Ils ont été comparés au cas de Vincent, âgé de 59 mois, porteur d’implant cochléaire. Ce dernier présente des étapes de développement linguistique décalées qui correspondent à celles d’enfants appariés sur l’âge auditif (date d’IC) plutôt qu’à l’âge chronologique (AC). Nous avons observé des similitudes et des différences, sur le plan phonologique et morphosyntaxique, entre Vincent et les enfants entendants : il présente des performances significativement moins bonnes que la norme pour certaines de structures morphosyntaxiques et processus morphophonologiques (accord du genre, élision, fusion) mais meilleures que les témoins dans la tâche de liaison. Nous pensons que le gain prothétique n’est pas le seul facteur qui a un impact sur le développement linguistique précoce et que d’autres facteurs l’influenceraient, tels l’âge d’implantation, le mode de communication, l’implantation bilatérale, l’investissement des parents et les effets d’apprentissage. Enfin, notre étude de cas n’a pu étayer si la maîtrise de la production phonémique est en relation avec la maîtrise de certaines structures et processus morphologiques.

Analyse géographique des investissements internationaux de la China National Petroleum Corporation

Ce mémoire propose une analyse de l’expansion internationale de la China National Petroleum Corporation (CNPC) et des impacts de cette expansion sur la sécurité énergétique de la Chine. Dans le cadre de cette recherche, l’approvisionnement énergétique d’un pays est jugé sécuritaire lorsqu’une quantité suffisante de ressources nécessaires pour combler sa demande en énergie sont présentes, disponibles et accessibles et que son approvisionnement en services énergétiques demeure fiable et abordable. La recherche comporte quatre volets. Le premier volet porte sur les étapes de la restructuration de l’industrie pétrolière chinoise depuis 1949. Celle-ci est analysée au travers des changements dans les modes de gestion des compagnies pétrolières nationales et dans leurs relations avec le gouvernement chinois. Le deuxième volet traite de la diversification et des nouvelles spécialisations de CNPC. Ces aspects sont étudiés dans le cadre d’une analyse du pourcentage de ses actifs dans chaque segment industriel (aval, intermédiaire et amont) obtenus grâce à ses rapports annuels. Le troisième volet aborde la répartition géographique des activités de la compagnie que l’on étudie à l’aide d’une analyse approfondie de près de 150 investissements, acquisitions et contrats réalisés à l’étranger entre 1992 et 2014. Le quatrième volet aborde les impacts des investissements à l’étranger de la compagnie sur la sécurité énergétique de la Chine. Ces impacts sont mesurés par l’entremise d’une analyse des flux pétroliers internationaux vers la Chine que l’on compare à la production de CNPC par pays. Ce mémoire permet de déterminer que l’expansion internationale de CNPC sert d’abord et avant tout les intérêts économiques de la compagnie. Ce sont surtout ses investissements dans la construction d’infrastructures de transport (oléoducs, gazoducs ainsi que les usines et terminaux de liquéfaction de gaz naturel liquéfié) qui apportent des bénéfices directs à la sécurité énergétique de la Chine. La contribution des investissements dans les autres secteurs est beaucoup moins systématique et dépend largement de la période au cours de laquelle ils ont été effectués.

Problems and Prospects of Tea Plantation Industry in Kerala

The overall objective of the study is to examine the problems and prospects of the tea on industry in Kerala. The specific objectives are to trace the historical evolution of the tea plantation industry in India with special reference to Kerala and to study the performance of tea plantation industry in Kerala. In order to analyse the growth performance of tea plantation industry in Kerala in a comparative perspective, growth rates for the neighbouring states of Karnataka and Tamilnadu are estimated along with the National, South Indian and North Indian estimates. Tea plantation industry is a labour intensive activity. Productivity has been low primarily because of the over aging. In all the factories visited only Black tea is produced. In factories outmoded machines which installed years ago is still used which will increase the cost of production. The major problem is high cost of production and low price realization. The workers are found to be not satisfied with their working conditions- long journey to work place, absence of resting places, latrine facilities etc. and also the problems arising from dust in the factory. At a macro level the tea plantation industry has been facing the adverse impacts of globalisation and trade liberalization. There is only one solution to this problem that is to improve the competitiveness in production of raw leaf and manufacturing of tea. Government has a very important role with specification of strict quality control

A Study of Coir Vyvasaya Co-Operative Societies in Kerala – Performance, Problems and Prospects

The present study was undertaken to evaluate the performance of Coir Vyavasaya Co-operative societies (CVCs) in Kerala. It was also intended to examine the extent of fulfillment of the objectives of Co-operativisation Scheme and the socio-economic betterment of worker members, Further the study was directed to find out the level of participation of members in the affairs of CVCs and to identify the major problems confronting the CVCs and the future prospects of the industry. The objectives of this study are to evaluate the performance of CVCs in Kerala with reference to the objectives of co-operativisation, socio-economic background of the worker members of the CVCs in the state, extent of members participation, major problems etc. Major findings of the study shows that 84% of CVCs surveyed were incurring losses, the long-term solvency position of the CVCS shows very pathetic situation, ration analysis shows and unhealthy state of affaires with respect to short-term solvency position and operating efficiency of all categories of CVS were found to be extremely poor. If CVCs are enabled to increase their quantity of production and there by the volume of business, their amount of loss can be reduced. If this is so, the societies can provide more days of employment to their work members, which will help them to earn more wages and thereby improve their economic and social conditions

Dynamics of Land Use in Recently Settled Forest Areas: a Case Study of Attappady , Kerala

The present study on the dynamics of land use in recently settled forest areas. In the course of events, tribals lost their land; the demographic structure of Attappady changed; the cropping pattern got diversified; traditional techniques of production were ruined; new crops and new techniques of cultivation came to stay; and the entire cost and return structure of production underwent radical change. Migration to Attappady is essentially a continuation of the Malabar migration process from Travancore, through, some people from Tamil Nadu also had migrated to this region earlier. The demographic structure, along with land structure, has changed in favour of the settlers within a short span of time. Lack of security of ownership has acted as a strong reason for wanton exploitation of land resources. The major influencing factors on crop choices among settlers were labour endowment, date of settlement and education. Attappady is an unique ecosystem in Kerala characterized by many interdependables. The latest hand of environmental degradation is a grave danger especially on sloppy terrains,which are under cultivation of tapioca and dry annual crops like groundnuts, cotton, grams etc. Soil erosion as a result of the unplanned cultivation of these crops has resulted in dramatic decline in soil fertility and hence low crop productivity. This calls for a watershed management approach for the sustainable development of the region. A progressive agrarian transformation is warranted to maintain the homegarden as a sustainable production system in ecological and socio-economic terms.

Analysis and Optimization of Machining Process Using Evolutionary Algorithms

To ensure quality of machined products at minimum machining costs and maximum machining effectiveness, it is very important to select optimum parameters when metal cutting machine tools are employed. Traditionally, the experience of the operator plays a major role in the selection of optimum metal cutting conditions. However, attaining optimum values each time by even a skilled operator is difficult. The non-linear nature of the machining process has compelled engineers to search for more effective methods to attain optimization. The design objective preceding most engineering design activities is simply to minimize the cost of production or to maximize the production efficiency. The main aim of research work reported here is to build robust optimization algorithms by exploiting ideas that nature has to offer from its backyard and using it to solve real world optimization problems in manufacturing processes.In this thesis, after conducting an exhaustive literature review, several optimization techniques used in various manufacturing processes have been identified. The selection of optimal cutting parameters, like depth of cut, feed and speed is a very important issue for every machining process. Experiments have been designed using Taguchi technique and dry turning of SS420 has been performed on Kirlosker turn master 35 lathe. Analysis using S/N and ANOVA were performed to find the optimum level and percentage of contribution of each parameter. By using S/N analysis the optimum machining parameters from the experimentation is obtained.Optimization algorithms begin with one or more design solutions supplied by the user and then iteratively check new design solutions, relative search spaces in order to achieve the true optimum solution. A mathematical model has been developed using response surface analysis for surface roughness and the model was validated using published results from literature.Methodologies in optimization such as Simulated annealing (SA), Particle Swarm Optimization (PSO), Conventional Genetic Algorithm (CGA) and Improved Genetic Algorithm (IGA) are applied to optimize machining parameters while dry turning of SS420 material. All the above algorithms were tested for their efficiency, robustness and accuracy and observe how they often outperform conventional optimization method applied to difficult real world problems. The SA, PSO, CGA and IGA codes were developed using MATLAB. For each evolutionary algorithmic method, optimum cutting conditions are provided to achieve better surface finish.The computational results using SA clearly demonstrated that the proposed solution procedure is quite capable in solving such complicated problems effectively and efficiently. Particle Swarm Optimization (PSO) is a relatively recent heuristic search method whose mechanics are inspired by the swarming or collaborative behavior of biological populations. From the results it has been observed that PSO provides better results and also more computationally efficient.Based on the results obtained using CGA and IGA for the optimization of machining process, the proposed IGA provides better results than the conventional GA. The improved genetic algorithm incorporating a stochastic crossover technique and an artificial initial population scheme is developed to provide a faster search mechanism. Finally, a comparison among these algorithms were made for the specific example of dry turning of SS 420 material and arriving at optimum machining parameters of feed, cutting speed, depth of cut and tool nose radius for minimum surface roughness as the criterion. To summarize, the research work fills in conspicuous gaps between research prototypes and industry requirements, by simulating evolutionary procedures seen in nature that optimize its own systems.

Re-engineering and Re-defining University Libraries in the context of modern Information and Communication Technologies: a study with special reference to the University Libraries in Kerala

Information and communication technologies are the tools that underpin the emerging “Knowledge Society”. Exchange of information or knowledge between people and through networks of people has always taken place. But the ICT has radically changed the magnitude of this exchange, and thus factors such as timeliness of information and information dissemination patterns have become more important than ever.Since information and knowledge are so vital for the all round human development, libraries and institutions that manage these resources are indeed invaluable. So, the Library and Information Centres have a key role in the acquisition, processing, preservation and dissemination of information and knowledge. ln the modern context, library is providing service based on different types of documents such as manuscripts, printed, digital, etc. At the same time, acquisition, access, process, service etc. of these resources have become complicated now than ever before. The lCT made instrumental to extend libraries beyond the physical walls of a building and providing assistance in navigating and analyzing tremendous amounts of knowledge with a variety of digital tools. Thus, modern libraries are increasingly being re-defined as places to get unrestricted access to information in many formats and from many sources.The research was conducted in the university libraries in Kerala State, India. lt was identified that even though the information resources are flooding world over and several technologies have emerged to manage the situation for providing effective services to its clientele, most of the university libraries in Kerala were unable to exploit these technologies at maximum level. Though the libraries have automated many of their functions, wide gap prevails between the possible services and provided services. There are many good examples world over in the application of lCTs in libraries for the maximization of services and many such libraries have adopted the principles of reengineering and re-defining as a management strategy. Hence this study was targeted to look into how effectively adopted the modern lCTs in our libraries for maximizing the efficiency of operations and services and whether the principles of re-engineering and- redefining can be applied towards this.Data‘ was collected from library users, viz; student as well as faculty users; library ,professionals and university librarians, using structured questionnaires. This has been .supplemented by-observation of working of the libraries, discussions and interviews with the different types of users and staff, review of literature, etc. Personal observation of the organization set up, management practices, functions, facilities, resources, utilization of information resources and facilities by the users, etc. of the university libraries in Kerala have been made. Statistical techniques like percentage, mean, weighted mean, standard deviation, correlation, trend analysis, etc. have been used to analyse data.All the libraries could exploit only a very few possibilities of modern lCTs and hence they could not achieve effective Universal Bibliographic Control and desired efficiency and effectiveness in services. Because of this, the users as well as professionals are dissatisfied. Functional effectiveness in acquisition, access and process of information resources in various formats, development and maintenance of OPAC and WebOPAC, digital document delivery to remote users, Web based clearing of library counter services and resources, development of full-text databases, digital libraries and institutional repositories, consortia based operations for e-journals and databases, user education and information literacy, professional development with stress on lCTs, network administration and website maintenance, marketing of information, etc. are major areas need special attention to improve the situation. Finance, knowledge level on ICTs among library staff, professional dynamism and leadership, vision and support of the administrators and policy makers, prevailing educational set up and social environment in the state, etc. are some of the major hurdles in reaping the maximum possibilities of lCTs by the university libraries in Kerala. The principles of Business Process Re-engineering are found suitable to effectively apply to re-structure and redefine the operations and service system of the libraries. Most of the conventional departments or divisions prevailing in the university libraries were functioning as watertight compartments and their existing management system was more rigid to adopt the principles of change management. Hence, a thorough re-structuring of the divisions was indicated. Consortia based activities and pooling and sharing of information resources was advocated to meet the varied needs of the users in the main campuses and off campuses of the universities, affiliated colleges and remote stations. A uniform staff policy similar to that prevailing in CSIR, DRDO, ISRO, etc. has been proposed by the study not only in the university libraries in kerala but for the entire country.Restructuring of Lis education,integrated and Planned development of school,college,research and public library systems,etc.were also justified for reaping maximum benefits of the modern ICTs.

Gill Nets of Kerala

The fishing industry the world over is passing through a critical situation.The landings of marine fishes seemed to have reached saturation in major fishing areas of the world.As a general rule fisheries employing fishing gear and techniques used by small scale and artisanal fishermen either from shore or from onboard small fishing craft come under small-scale fisheries.This study on gill nets of Kerala, the fishing method depended upon by maximum fishermen of the state focuses on the importance of this selective and low energy fishing method in the marine fishing sector of the state.The study opens with the conceptual framework by briefly reviewing the crisis in the marine fisheries sector. Maximum fishermen depend upon gill net, which is, an important selective and low energy fishing gear. A review of relevant literature on aspects such as material, selectivity and techno-economic efficiency together with scope and main objectives of the study form the major part of the compass of the introductory chapter.This survey provided the inputs for selection of centres. The chapter presents the basis for selection of sample centres, sample units and methodology for field and experimental study.The subject matter of the fourth chapter is a basic study on gear aterials. The weathering resistance, which is an important criterion to assess the material performance, was studied for polyamide monofilament in comparison to polyamide multifilament and polyethylene twisted monofilament.The study provides supporting evidence of oxidation and characteristic C-O stretching in polyethylene and cyclic lactam .formation and presence of OH in polyamide.The study indicates that small mesh gill netting can be encouraged as a selective fishing method in the inshore waters with restrained use of 30 and 32 mm mesh sizes. The economic efficiency was assessed using standard indices such as rate of return, internal rate of return, pay back period, fishery income, energy efficiency and factor productivity. The effect of size and cost of capital and cost of production on the economics of operation is also discussed in this chapter. It was observed that level of technology did not have direct effect on economic performance.

Studies on influance of environmental parameters affecting the biology of oyster crassostrca madrasensis(Preston)

The Indian edible oyster Crassostrea madrasensis (Preston) is known to be a highly suitable candidate species for culture. Though Q, madrasensis has been subjected to intensive research, there has been no significant attempt to culture this oyster commercially. One major reason for the lack of interest in oyster culture could be the disparity in growth, survival and production reported by earlier workersf from different regions along the Indian coast. Greater predictability of production can create confidence and encourage entrepreneurs interested in oyster culture. The present study, which is a detailed investigation on the influence of various environmental variables on growth and reproduction of Q, madrasensis, is not confined to the impact of only hydrological parameters but is also extended to study the effect of different degrees of aerial exposure on growth and survival. The main objective of the study is to develop a background for subsequent development of a site suitability index for culture of Q, madrasensis along the Indian coast. Two sets of experiments were conducted during the present study. Details of the experiments are presented in the thesis under two major chapters comprising four sections each. Each chapter has a separate introduction, materials and methods, results and discussion. .

Management of Higher Educational Institutions in Kerala

Economists consider education as an investment in man. Education develops human resources necessary for the economic and political growth of any nation. Adam Smith stressed the importance of education and included the acquired and useful activities of all the inhabitants or members of society in his concept of fixed capital.‘ Karl Marx shared with Smith's view when he laid down that the function of education in a socialist society will be to overcome the alienation of the worker from the means of production; while developing the technical skill it will make him a complete man as well as a producer.2 Education is also considered as a powerful instrument for social change. By inculcating moral and spiritual values, it brings changes both in the individual and in the society. It aims at creating a social order founded on the values of freedom, social justice and equal opportunity.3 The objective of this exploratory study is to enquire into the existing system of managing higher educational institutions in Kerala, compare it with the accepted principles of management believed to be applicable to all organisations, and develop a model capable of introducing more effective management practices